LTC3115-1IDE#PBF - 40V, 2A Buck-Boost DC/DC Converter | Analog Devices
N.º da peça: LTC3115-1IDE#PBF ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $6.5 | $6,50 |
| 10 | $5.85 | $58,50 |
| 100 | $5.2 | $520,00 |
| 500 | $4.68 | $2.340,00 |
| 1.000 | $4.16 | $4.160,00 |
LTC3115-1IDE#PBF Visão geral
A buck-boost converter is a type of DC-DC converter that can step up or step down an input voltage to produce a regulated output voltage, regardless of whether the input is higher or lower than the output. This makes it ideal for battery-powered systems where the battery voltage may vary above and below the desired rail. The LTC3115-1 is a synchronous 4-switch topology, which uses internal MOSFETs to achieve high efficiency across a wide load range.
Key features include a programmable output current limit, an internal phase-locked loop for synchronization to an external clock, and a shutdown mode that reduces quiescent current to near zero. The switching frequency is adjustable from 300kHz to 2MHz via an external resistor, allowing designers to optimize efficiency versus component size. The device also offers soft-start to limit inrush current during startup.
Technically, the LTC3115-1 uses a current-mode control architecture with a 4-switch buck-boost topology, enabling seamless transition between buck and boost modes. It achieves efficiencies up to 95% in typical applications. The wide input range and high output current make it suitable for automotive, industrial, and portable applications where input voltage can fluctuate significantly.
Typical applications include automotive power supplies for infotainment and ADAS, industrial sensors and actuators, and battery-powered equipment such as portable instruments and IoT devices. The device's ability to maintain a regulated output from a varying input makes it a versatile choice for power management.
When designing with the LTC3115-1, ensure proper PCB layout with low-inductance ground paths and adequate thermal vias for the exposed pad. The switching node should be kept short to minimize EMI. Also, select the inductor and capacitors according to the datasheet guidelines to achieve stable operation.
Alternativas drop-in para LTC3115-1IDE#PBF — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
LTC3115IDHD-1#PBF
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LTC3115EDHD-1#PBF
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LTC3115-2
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
LTC3115-1IDE#PBF Classificações máximas e características elétricas
| Função | Buck-Boost |
| Tensão de saída | 2.7V to 40V (Adjustable) |
| Output Current | 2A |
| Faixa de tensão de entrada | 2.7V to 40V |
| Frequência de comutação | 300kHz to 2MHz (Programmable) |
| Retificador síncrono | Yes |
| Eficiência | Up to 95% |
| Faixa de temperatura de operação | -40°C to 125°C |
| Encapsulamento | 16-Lead DFN (4mm x 3mm) |
| Tipo de montagem | Surface Mount |
| Synchronization | Yes (via PWM/SYNC pin) |
| Soft-start | Yes |
| RoHS | Compliant |
Configuração de pinos do LTC3115-1IDE#PBF
| Pino 1 | SW1 — Switch node 1 |
| Pino 2 | PVIN — Power input |
| Pino 3 | VIN — Input voltage sense |
| Pino 4 | RUN — Enable input |
| Pino 5 | RT — Switching frequency set |
| Pino 6 | PWM/SYNC — PWM mode select / sync input |
| Pino 7 | ITH — Error amplifier output |
| Pino 8 | FB — Feedback input |
| Pino 9 | VOUT — Output voltage sense |
| Pino 10 | PVOUT — Power output |
| Pino 11 | SW2 — Switch node 2 |
| Pino 12 | PGND — Power ground |
| Pino 13 | PGND — Power ground |
| Pino 14 | PGND — Power ground |
| Pino 15 | PGND — Power ground |
| Pino 16 | PGND — Power ground |
Aplicações típicas
LTC3115-1IDE#PBF é adequado para 6 aplicaçãos: Automotive Power Supplies, Industrial Power Supplies, Battery-Powered Equipment, Portable Medical Devices, IoT and Smart Home Devices, Telecom and Networking Equipment.
Automotive Power Supplies
The LTC3115-1IDE#PBF is ideal for automotive power supplies due to its wide 2.7V to 40V input range, which can handle load dumps and transients. It provides a regulated output for infotainment systems, ADAS, and sensors. Its high efficiency reduces heat dissipation in the vehicle's cabin, and its programmable switching frequency allows optimization for EMI compliance.
Recomendado
Industrial Power Supplies
In industrial applications, the LTC3115-1IDE#PBF provides a stable output from fluctuating input sources such as 24V buses or battery backups. Its wide input range and 2A output current make it suitable for powering sensors, actuators, and microcontrollers. The device's synchronization feature allows it to be used in noise-sensitive environments by locking to an external clock.
Recomendado
Battery-Powered Equipment
The LTC3115-1IDE#PBF is perfect for battery-powered devices like portable instruments and IoT nodes. It maintains a regulated output even as the battery voltage drops below the output, maximizing usable battery capacity. Its high efficiency (up to 95%) extends battery life, and the shutdown mode reduces quiescent current to near zero for long standby times.
Recomendado
Portable Medical Devices
For portable medical devices, the LTC3115-1IDE#PBF provides a reliable power supply from batteries or USB sources. Its low noise operation and synchronization capability are beneficial for sensitive analog circuits. The wide input range ensures operation during battery discharge, and the small DFN package saves board space in compact designs.
Recomendado
IoT and Smart Home Devices
The LTC3115-1IDE#PBF is well-suited for IoT devices that need to operate from a variety of power sources, including batteries, solar panels, or USB. Its wide input range and high efficiency make it ideal for energy harvesting applications. The programmable switching frequency allows designers to avoid interference with wireless communication bands.
Recomendado
Telecom and Networking Equipment
In telecom and networking equipment, the LTC3115-1IDE#PBF provides a regulated output from a wide input range, such as 12V or 48V buses. Its 2A output current can power FPGAs, processors, and communication modules. The synchronization feature helps reduce EMI in systems with multiple converters.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para LTC3115-1IDE#PBF — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | LTC3115IDHD-1#PBF | LTC3115EDHD-1#PBF | LTC3115IFE-1#PBF | LTC3115EFE-1#PBF | LTC3115-2 | TPS63070RNMT |
|---|---|---|---|---|---|---|---|
| Package | 16-Lead DFN | 16-Lead DFN | 16-Lead DFN | 20-Lead TSSOP | 20-Lead TSSOP | 16-Lead DFN | VQFN-16 |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Input Voltage Range | 2.7V to 40V | 2.7V to 40V | 2.7V to 40V | 2.7V to 40V | 2.7V to 40V | 2.7V to 40V | 2V to 16V |
| Output Current | 2A | 2A | 2A | 2A | 2A | 2A | 3A |
| Switching Frequency | 300kHz to 2MHz | 300kHz to 2MHz | 300kHz to 2MHz | 300kHz to 2MHz | 300kHz to 2MHz | 300kHz to 2MHz | 2.4MHz |
| Operating Temperature Range | -40°C to 125°C | -40°C to 125°C | 0°C to 70°C | -40°C to 125°C | 0°C to 70°C | -40°C to 125°C | -40°C to 125°C |
| Synchronization | Yes | Yes | Yes | Yes | Yes | Yes | No |
| Price (1pc) | $6.50 | $6.50 | $5.80 | $6.20 | $5.50 | $6.80 | $3.50 |
Principais diferenciais
- Wide input voltage range (2.7V to 40V) (vs TPS63070RNMT)
- Synchronization capability (vs TPS63070RNMT)
- Industrial temperature grade (vs LTC3115EDHD-1#PBF)
Notas de projeto
For optimal performance, place the input and output capacitors as close as possible to the PVIN and PVOUT pins. Use a low-ESR ceramic capacitor of at least 10uF on the input and output. The exposed pad should be soldered to a large copper area for thermal dissipation.
Keep the switching node (SW1, SW2) traces short and wide to minimize parasitic inductance and EMI. Route the feedback trace away from the switching node to avoid noise coupling. Use a ground plane to provide a low-impedance return path.
The LTC3115-1IDE#PBF can dissipate significant power at high output currents. Ensure adequate thermal vias under the exposed pad to conduct heat to the PCB. For continuous operation at 2A, consider a copper area of at least 1 square inch on the top and bottom layers.
Informações de conformidade
RoHS compliant per 'PBF' suffix. AEC-Q100 qualification not specified in available data.
