Analog Devices

LTC7652CH Zero-Drift Op Amp, 5uV Offset | Analog Devices

N.º da peça: LTC7652CH ✗ Fim de vida
5uV Vdss 30pA Id 8-terminal round TO-5 Package
MOQ: 1 |

LTC7652CH Visão geral

The Analog Devices LTC7652CH is a single-circuit, chopper-stabilized zero-drift operational amplifier with a guaranteed maximum offset voltage of 5uV, input bias current of 30pA, and a nominal slew rate of 4V/us. The device is offered in an 8-terminal round TO-5 wire-lead package and uses the enhanced LTCMOS silicon-gate process.

A zero-drift operational amplifier is an amplifier architecture that continuously corrects offset-voltage errors instead of allowing input-referred offsets to drift with time, temperature, or common-mode voltage. Within the broader hierarchy of amplifier ICs and instrumentation signal-conditioning devices, the LTC7652CH trades higher-frequency simplicity for exceptionally low DC offset and drift. Its picoampere input current also makes it suitable for high-impedance transducers.

The principal benefit of the LTC7652CH is its combination of low offset and low drift. The maximum offset is 5uV, the maximum offset drift is 0.05uV/°C, and the typical offset drift is 0.01uV/°C. Long-term stability is specified at 100nV/month. These characteristics improve DC measurement accuracy when small differential signals must be amplified without substantial error from the amplifier itself.

Chopper stabilization constantly corrects errors associated with initial offset and changes in offset caused by time, temperature, and common-mode voltage. The manufacturer describes both the LTC7652 and LTC1052 as low-noise zero-drift amplifiers built with enhanced LTCMOS silicon-gate technology. The 30pA guaranteed maximum input bias current supports leakage-sensitive measurement paths, while the 4V/us nominal slew rate provides useful bandwidth for moderate-amplitude transient signals.

Typical applications include precision bridge-amplifier front ends, low-level current measurement, temperature-sensor conditioning, strain-gage instrumentation, low-voltage error amplifiers, and laboratory sensor interfaces. The low offset is particularly valuable when the measured signal is near the millivolt or microvolt scale, while the low input bias current reduces loading on high-impedance sensors.

For best results, use stable reference and feedback resistors, keep input and output layouts compact, and account for the power-supply range and common-mode limits in the manufacturer datasheet. The LTC7652CH is an older hermetic TO-5 device, so designers should verify availability, temperature coverage, lead finish, and procurement requirements before committing a new production design to this package.

This page combines the LTC7652CH offset, drift, bias-current, package, and slew-rate characteristics with purchasing guidance, selection considerations, and engineering guidance for zero-drift amplifier design. It also distinguishes exact drop-in options from broader functional equivalents so engineers can assess PCB compatibility before making a replacement decision.

Alternativas drop-in para LTC7652CH — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

LTC7652

✅ Drop-In ⚠️ Especificações não verificadas
📦 TO-5 8-lead
Family-level orderable code; maximum offset 5uV and typical offset drift 0.01uV/°C match the published LTC7652CH characteristics, while the exact suffix-specific temperature and lead-finish differences require ordering-table confirmation.

📋 Alternativa de referência (fora do catálogo)

LTC7652C

✅ Drop-In ⚠️ Especificações não verificadas
📦 TO-5 8-lead
Uses the same LTC7652 zero-drift family and 8-lead TO-5 package; the C suffix may differ from CH in temperature grade or qualification, so the manufacturer ordering table must confirm exact interchangeability.

📋 Alternativa de referência (fora do catálogo)

LTC7652CH Classificações máximas e características elétricas

Amplifier Type Zero-drift operational amplifier
Circuit Count 1 circuit
Guaranteed Maximum Offset Voltage 5uV
Guaranteed Maximum Offset Drift 0.05uV/°C
Typical Offset Drift 0.01uV/°C
Long-Term Offset Stability 100nV/month
Guaranteed Maximum Input Bias Current 30pA
Nominal Slew Rate 4V/us
Stabilization Method Chopper stabilization
Semiconductor Process Enhanced LTCMOS silicon-gate process
Input Current Class Picoampere input current
Temperature Grade Industrial
Package Type 8-terminal round TO-5
Terminal Form Wire
Estilo de montagem Through-hole metal can
Input Offset Correction Time, temperature, and common-mode voltage correction

Guia de Configuração de Pinos do LTC7652CH 8-terminal round to-5

Configuração de pinos para LTC7652CH (pacote 8-terminal round to-5). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 8-terminal round to-5 para LTC7652CH

Nenhum dado detalhado de pinagem disponível para LTC7652CH.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

LTC7652CH é adequado para 6 aplicaçãos: Precision Bridge Amplifier, Low-Level Current Sensing, Temperature Sensor Conditioning, Strain-Gage Instrumentation, High-Impedance Transducer Interface, Laboratory Instrumentation.

🏭

Precision Bridge Amplifier

The LTC7652CH suits precision bridge-amplifier front ends where a small differential sensor signal is superimposed on a larger common-mode level. Its guaranteed 5uV maximum input offset limits amplifier-generated error, while the 30pA maximum input bias current reduces loading on high-impedance bridge outputs. Chopper stabilization corrects offset changes associated with time, temperature, and common-mode voltage, improving long-term DC accuracy. In a typical instrumentation circuit, the amplifier multiplies the bridge imbalance while rejecting common-mode voltage; engineers should still verify input common-mode range, output swing, supply voltage, resistor matching, and gain stability against the manufacturer datasheet before finalizing the front end.

⚡

Low-Level Current Sensing

The LTC7652CH is appropriate for low-level current measurement when the shunt voltage approaches the millivolt range and amplifier offset would otherwise become a significant error source. Its guaranteed 5uV maximum offset and 0.05uV/°C maximum drift help maintain accuracy across temperature changes, while the 4V/us nominal slew rate supports moderate signal transitions. Place the amplifier in a differential configuration around the shunt and pay attention to input bias-current offsets, resistor-generated errors, common-mode limits, and output saturation. The very low 30pA maximum bias current is valuable when the shunt is implemented as a high-value resistor or when measurement-node leakage could otherwise create a comparable error.

🌡️

Temperature Sensor Conditioning

The LTC7652CH can condition resistive temperature-detector signals where accurate DC amplification is more important than wide-bandwidth performance. The 5uV guaranteed maximum offset is small relative to many millivolt-scale RTD signals, and the 30pA maximum input bias current reduces excitation-dependent loading on high-value sensing elements. Chopper stabilization reduces offset movement caused by temperature and elapsed time, which benefits stable industrial readings. A practical circuit uses the amplifier with an excitation reference and matched feedback network, then converts the amplified differential voltage through an ADC. Verify supply voltage, input common-mode range, output swing, noise behavior, and the sensor's excitation level in the manufacturer datasheet before selecting resistor values.

⚖️

Strain-Gage Instrumentation

The LTC7652CH matches strain-gage instrumentation requirements because strain signals are small and the bridge's common-mode voltage can be much larger than the desired measurement. With a guaranteed 5uV maximum offset and 0.05uV/°C maximum drift, the amplifier limits input-referred DC error, while picoampere-level input bias current avoids appreciably loading the bridge. Its chopper-stabilized architecture corrects initial offset and drift caused by temperature, time, and common-mode changes. Use a balanced bridge and low-noise gain network, and observe the manufacturer's input and output range limits. Thermal gradients across the amplifier and unequal bridge resistors can create errors larger than the amplifier offset, so placement and resistor selection remain important.

🧩

High-Impedance Transducer Interface

The LTC7652CH is useful for interfaces involving high-source-impedance transducers because its guaranteed maximum input bias current is only 30pA. That low current minimizes the error voltage produced across a sensitive source and allows the amplifier to preserve small sensor signals. The 5uV maximum offset and chopper-based correction of time-, temperature-, and common-mode-dependent drift support stable DC measurements. Designers commonly place the LTC7652CH near the transducer to minimize parasitic leakage and routing capacitance, then use guarded grounding or shielding where necessary. Confirm dielectric absorption, board cleanliness, humidity effects, and input protection requirements at the system level, because these factors can dominate the total measurement error.

🔬

Laboratory Instrumentation

The LTC7652CH can serve as the input amplifier in laboratory instruments that measure microvolt-level or millivolt-level DC signals with stable references. Its 5uV maximum offset, 0.01uV/°C typical drift, and 100nV/month long-term stability reduce time-dependent calibration shifts. Chopper stabilization continuously corrects offset errors, while the 30pA maximum bias current helps when source impedances are high. The 4V/us nominal slew rate is sufficient for many low-frequency measurement signals but does not make the device a general-purpose wideband amplifier. Validate noise density, clock-related artifacts, settling behavior, input capacitance, and EMI pickup in the final instrument, and use the manufacturer datasheet for the complete test conditions.

Resumo dos produtos recomendados

LTC7652 Same-family zero-drift amplifier candidate Usado em: Precision Bridge Amplifier, Low-Level Current Sensing, Temperature Sensor Conditioning, Strain-Gage Instrumentation, High-Impedance Transducer Interface, Laboratory Instrumentation LTC7652C Same-family package-compatible candidate Usado em: Precision Bridge Amplifier, Low-Level Current Sensing, Strain-Gage Instrumentation, High-Impedance Transducer Interface LTC1052 Related zero-drift amplifier family requiring compatibility review Usado em: Temperature Sensor Conditioning, Laboratory Instrumentation
What is the LTC7652CH and what is it used for?
The LTC7652CH is a single chopper-stabilized, zero-drift operational amplifier optimized for precision DC measurement. According to the Analog Devices product information, chopper stabilization corrects offset errors caused by time, temperature, and common-mode voltage, while picoampere input currents minimize loading of high-impedance sources. Its guaranteed 5uV maximum offset and 30pA maximum input bias current make it suitable for bridge amplifiers, current sensing, temperature measurement, strain gauges, and laboratory instrumentation.
What are the key specifications of LTC7652CH that engineers should know?
The principal LTC7652CH specifications are a guaranteed 5uV maximum offset voltage, 0.05uV/°C maximum offset drift, 0.01uV/°C typical drift, 100nV/month long-term stability, 30pA maximum input bias current, and 4V/us nominal slew rate. The Analog Devices product page identifies it as a low-noise zero-drift amplifier made using enhanced LTCMOS silicon-gate technology. The package is an 8-terminal, round, wire-lead TO-5 configuration.
Where can I download the LTC7652CH datasheet PDF?
The official LTC7652 product page is the appropriate starting point for the manufacturer datasheet and technical documentation. It is available at https://www.analog.com/en/products/ltc7652.html. The manufacturer page also describes the chopper-stabilized architecture, enhanced LTCMOS silicon-gate process, picoampere input currents, and offset-correction behavior. Use the manufacturer document for complete electrical characteristics, pin assignments, supply limits, common-mode limits, and test conditions.
Where can I find the LTC7652CH pinout and package information?
The LTC7652CH uses an 8-terminal round TO-5 wire-lead package, as identified in the manufacturer and distributor product listings. Consult the pin-configuration and package drawings in the official LTC7652 datasheet before assigning PCB connections because terminal numbering and connection details must be followed exactly. This article does not reproduce individual terminal names, and the TO-5 outline is not represented by a standard surface-mount package drawing.
What is the input offset voltage of the LTC7652CH?
The guaranteed maximum input offset voltage of the LTC7652CH is 5uV. The Analog Devices and Linear Technology documentation describes continuous chopper stabilization of offset-voltage errors, including initial offset and changes caused by time, temperature, and common-mode voltage. A 5uV maximum offset is particularly useful in millivolt-level measurement systems because it limits the amplifier's contribution to total input-referred measurement error.
Why is the LTC7652CH suitable for high-impedance sensors?
The LTC7652CH is suitable for high-impedance sensors because its guaranteed maximum input bias current is only 30pA. Low bias current reduces the current drawn from source nodes, reducing the voltage error generated across high source impedances. Combined with the 5uV maximum offset, this behavior supports conditioning for resistive temperature detectors, strain gauges, electrochemical sensors, and other high-resistance transducers requiring accurate DC amplification.
LTC7652CH vs LTC7652 - which part should I select?
The LTC7652CH is the specified industrial-grade orderable version within the LTC7652 family, while LTC7652 is the family-level designation. The visible product information does not establish every ordering-code difference, so use the manufacturer ordering table to confirm temperature range, package, and lead-finish requirements. For a drop-in replacement, the PCB footprint, terminal assignment, and all electrical limits must match exactly; a broader family relationship alone is not sufficient.
When should I choose LTC7652CH over a conventional precision op amp?
Choose the LTC7652CH when DC offset and drift dominate the measurement error and picoampere input current is important. Its 5uV maximum offset, 0.05uV/°C maximum drift, and 30pA maximum bias current outperform many conventional precision amplifiers in those areas. A conventional op amp may be preferable when lower cost, wider bandwidth, simpler noise behavior, or a modern surface-mount package matters more than ultra-low offset.
What can replace the LTC7652CH without redesigning the PCB?
A PCB-compatible replacement must use the same 8-terminal TO-5 footprint and matching pin assignments, then satisfy the supply-voltage, input-common-mode, output-swing, offset, drift, bias-current, and temperature requirements. LTC7652 and LTC7652C are the closest same-family candidates identified, but final interchangeability must be confirmed against the manufacturer ordering table. The search did not establish five distinct, non-reel-code drop-in choices, so unrelated zero-drift amplifiers should not be treated as drop-in replacements.
Is the LTC7652CH the same as the LTC1052?
No, the LTC7652CH is not automatically interchangeable with the LTC1052 even though Analog Devices describes both as low-noise zero-drift amplifiers using enhanced LTCMOS silicon-gate technology. The visible information does not establish identical pin assignments, supply ratings, input ranges, or offset specifications for every LTC1052 package variant. Confirm the exact suffix, package, terminal map, and electrical limits in the respective manufacturer datasheets before substituting one for the other.
What is the best Analog Devices equivalent for LTC7652CH?
The closest same-manufacturer family candidates are LTC7652 and LTC7652C because they share the LTC7652 product family and use the established hermetic amplifier package family. They should be considered only after verifying the exact terminal configuration and orderable-code differences. If neither candidate matches every rating, a different Analog Devices precision amplifier may require a PCB or schematic change rather than serving as a true drop-in replacement.
Where can I buy LTC7652CH online and get a current quote?
Use the Request a Quote form on this page to request the current LTC7652CH price, stock position, lead time, and minimum order quantity. The part is an older 8-terminal TO-5 device, so procurement status can vary by package and quantity. The manufacturer product page and the LTC7652CH distributor listing are useful references for technical identity, while the quote form provides the current commercial response for this exact MPN.
What is the current price of LTC7652CH?
The current commercial price for LTC7652CH is best obtained through the Request a Quote form on this page because legacy amplifier pricing and stock can change with quantity. This page does not publish a static unit price in its customer-facing technical content. Provide the required quantity, target date, and acceptable shipment location with the request so procurement can respond with the most relevant quotation and availability information.
What is the lead time and stock status of LTC7652CH?
Current stock and lead time for LTC7652CH should be requested through the Request a Quote form on this page. Because the component is a legacy 8-terminal TO-5 amplifier, availability may depend on remaining factory inventory, authorized-channel supply, and order quantity. The manufacturer product page is the proper source for product status, while the quote form can provide a current transaction-specific lead-time response.
Does LTC7652CH meet RoHS, REACH, and automotive qualification requirements?
RoHS, REACH, and automotive qualification status should be confirmed in the current Analog Devices product documentation or material-declaration record before using the LTC7652CH in a regulated production design. The available product information identifies an industrial temperature grade but does not establish AEC-Q100 qualification or a specific halogen-free declaration. Do not infer automotive, RoHS, or REACH compliance solely from the industrial-grade ordering code.

Dados de referência de engenharia para LTC7652CH — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the LTC7652CH when the design requires a legacy 8-terminal TO-5 precision amplifier with a guaranteed 5uV maximum offset, 0.05uV/°C maximum drift, 30pA maximum input bias current, and continuous chopper stabilization. It is particularly appropriate for millivolt-level bridges, high-impedance transducers, RTD interfaces, and laboratory DC measurement systems where input-referred offset dominates the error budget. Consider LTC7652 when its exact ordering code satisfies all electrical and environmental requirements. Consider LTC7652C only after checking whether its suffix-specific temperature grade and other orderable attributes match the required design. Do not substitute the LTC1052 without verifying pinout and ratings. If the legacy TO-5 footprint, availability, cost, or chopped-noise behavior is unsuitable, moving to a modern surface-mount zero-drift amplifier may require a PCB redesign but can provide newer packaging and broader sourcing options.

Comparação com alternativas

Parâmetro Este produto LTC7652 LTC7652C
Brand Analog Devices Analog Devices Analog Devices
Package 8-terminal round TO-5 8-terminal round TO-5 8-terminal round TO-5
Amplifier Type Chopper-stabilized zero-drift operational amplifier Chopper-stabilized zero-drift operational amplifier Chopper-stabilized zero-drift operational amplifier
Guaranteed Maximum Offset 5uV 5uV 5uV
Guaranteed Maximum Offset Drift 0.05uV/°C 0.05uV/°C 0.05uV/°C
Typical Offset Drift 0.01uV/°C 0.01uV/°C 0.01uV/°C
Maximum Input Bias Current 30pA 30pA 30pA
Nominal Slew Rate 4V/us 4V/us 4V/us
Long-Term Stability 100nV/month 100nV/month 100nV/month

Principais diferenciais

  • Guaranteed maximum offset (vs LTC7652)
  • Ultra-low input bias current (vs LTC7652C)
  • Low offset drift with chopper correction (vs LTC7652)

Notas de projeto

Do not treat every LTC7652 family member as automatically interchangeable. Before replacing LTC7652CH, compare the manufacturer ordering table for terminal assignments, temperature grade, supply voltage, common-mode range, output swing, offset limits, drift limits, and package lead finish. The visible product information confirms an industrial-grade, 8-terminal TO-5 device but does not provide enough detail to certify every suffix combination as a true drop-in part.

Place the LTC7652CH close to the source and feedback components, and keep input traces short to reduce leakage, thermoelectric-voltage pickup, and susceptibility to electromagnetic interference. Because offset error can be only 5uV, copper temperature gradients and dirty or humid board surfaces may create meaningful error. Use a low-leakage PCB finish, guard sensitive input nodes where appropriate, and maintain stable reference resistors to prevent board-level drift from overwhelming the amplifier's own drift specification.

Chopper stabilization corrects low-frequency offset but introduces periodic switching-related artifacts that can matter in high-resolution measurements. Evaluate the complete signal chain rather than relying only on the 5uV maximum offset rating. Use the manufacturer datasheet and application guidance to determine chopping-frequency effects, filtering requirements, settling behavior, and input capacitance limits. Apply appropriate low-pass filtering after confirming that its bandwidth preserves the intended measurement bandwidth.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The visible product information identifies an industrial temperature grade but does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status. Confirm current declarations with Analog Devices before production release.

Dados verificados em: 2026-11-19 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

LTC7652CH datasheet LTC7652CH datasheet pdf LTC7652CH pinout LTC7652CH equivalent LTC7652CH replacement LTC7652CH cross reference LTC7652CH price LTC7652CH stock LTC7652 5uV offset amplifier LTC7652 30pA input bias LTC7652 8 pin TO-5 LTC7652 zero drift instrumentation LTC7652CH vs LTC7652C Analog Devices LTC7652CH

Componentes & termos relacionados

Analog Devices Linear Technology LTC7652CH LTC7652 LTC7652C LTC1052 operational amplifier zero-drift amplifier chopper-stabilized amplifier instrumentation amplifier precision amplifier input offset voltage offset drift input bias current slew rate common-mode voltage LTCMOS silicon-gate process TO-5 package 8-terminal metal can precision measurement high-impedance sensor bridge amplifier RoHS REACH
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ