M2GL025-1FG484I - 27.6K LEs, 267 I/O IGLOO2 FPGA | Microchip
N.º da peça: M2GL025-1FG484I ✓ AtivoM2GL025-1FG484I Visão geral
An FPGA is a reprogrammable semiconductor whose logic, routing, and I/O blocks are configured after manufacture. Within the semiconductor hierarchy, the M2GL025-1FG484I is a field-programmable gate array, an FPGA, and a programmable-logic device. Its on-chip flash configuration memory allows the device to retain its configuration without an external configuration PROM, making it suitable for standalone control, bridging, I/O expansion, protocol conversion, and system-management designs.
The device provides 27,696 logic elements and 267 I/O in a 484-ball BGA package. These figures support dense parallel interfaces and multiple independent I/O standards, while the large ball count provides extensive power, ground, configuration, and user-I/O connections. The industrial-temperature designation permits operation in temperature-qualified industrial equipment, subject to the operating limits listed in the Microchip IGLOO2 documentation.
Microchip positions the IGLOO2 family for general-purpose functions including bridging, I/O expansion and conversion, system management, secure connectivity, video and image processing, Gigabit Ethernet control, and dual PCI Express control planes. Its flash-based configuration architecture simplifies board design by removing a mandatory external configuration memory device and allows field updates when the host system supports reconfiguration.
Designers should treat the 484-ball BGA as a fine-pitch layout challenge. Fanout, via-in-pad, solder-mask-defined pads, and assembly capability must be coordinated with the board manufacturer. Pin, bank, differential-I/O, and power-assignment decisions should follow the IGLOO2 packaging and pin-description user guide rather than relying on generic BGA assumptions.
For migration within the IGLOO2 family, verify the exact speed grade, temperature range, package code, and supported I/O standards at the substituted position. Microchip application note AC402 describes migration constraints between M2GL025, M2GL050, and M2GL090 devices, including the importance of using the correct VDDI supply for equivalent banks.
This page combines the device architecture, package details, family migration considerations, structured alternatives, and practical PCB guidance to support faster component selection and design review. Use the manufacturer datasheet, pin-description user guide, and application note AC402 for authoritative implementation details.
Alternativas drop-in para M2GL025-1FG484I — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com M2GL025-1FG484I (mesmo formato e footprint) — diferindo em Device Type, Product Family, Configuration Memory, Logic Elements, Package.
M2GL025-1FGG484I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
M2GL025-FG484I
✅ Drop-InConsulte o preço
Ver ficha técnica →M2GL025-FGG484I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
M2GL025-1FG484
✅ Drop-InConsulte o preço
Ver ficha técnica →M2GL025-FG484
✅ Drop-InConsulte o preço
Ver ficha técnica →M2GL025-1FG484I Classificações máximas e características elétricas
| Device Type | IGLOO2 Low Density Flash FPGA |
| Logic Elements | 27,696 (27.6K LEs) |
| User I/O Count | 267 |
| Core Supply Voltage | 1.2 V |
| Speed Grade | 1 |
| Temperature Grade | Industrial |
| Encapsulamento | 484-ball BGA |
| Tipo de montagem | Surface Mount |
| Configuration Memory | On-chip flash |
| Programmable Logic | FPGA |
| Product Family | IGLOO2 |
| Manufacturer Status | In Production |
Guia de Configuração de Pinos do M2GL025-1FG484I 484-ball bga
Configuração de pinos para M2GL025-1FG484I (pacote 484-ball bga). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para M2GL025-1FG484I.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
M2GL025-1FG484I é adequado para 6 aplicaçãos: Industrial Protocol Bridging, Video and Image Interface Conversion, System Management and Security Control, Gigabit Ethernet Control Plane, Medical and Diagnostic Equipment Control, Aerospace and Defense Data Processing.
Industrial Protocol Bridging
The M2GL025-1FG484I fits industrial bridges that translate between incompatible fieldbus, serial, parallel, or legacy peripheral interfaces. Its 27,696 logic elements provide substantial capacity for clock-domain crossing, protocol state machines, data buffering, and diagnostics, while 267 I/O support parallel control and communication channels. The on-chip flash configuration allows the bridge to operate without a separate configuration PROM. In an industrial enclosure, the I temperature suffix is appropriate as the starting point, subject to the manufacturer's operating-limit table. Use Microchip's pin-description guide when assigning bank power and differential signals because the electrical standard supported by each I/O must be verified for the selected design.
Recomendado
Video and Image Interface Conversion
The M2GL025-1FG484I is suitable for pixel-format conversion, timing generation, parallel-to-serial interface logic, and sensor data aggregation. The 27.6K logic-element count gives designers room for multiple parallel input channels, line buffers implemented with available memory resources, and control logic, while 267 I/O reduce the need for external I/O expanders. Its flash-based configuration supports deterministic operation after power-up and simplifies maintenance of field logic. The 484-ball BGA also provides a high pin count for power distribution and high-speed interface assignments. Exact supported I/O standards, achievable clock rates, and internal memory capacities must be checked in the IGLOO2 device documentation before committing a high-speed video timing budget.
Recomendado
System Management and Security Control
The M2GL025-1FG484I can implement power sequencing, fault detection, watchdog control, secure boot support, and peripheral supervision in an embedded control platform. With 27,696 logic elements, a single device can combine multiple supervisory functions without relying on separate small logic ICs, and the 267 available I/O are useful for monitoring numerous reset, alarm, and interlock signals. On-chip flash configuration allows the management logic to remain available after power cycling. For security-oriented designs, include the device within a protected boot and update process rather than treating programmable logic as an isolated trust anchor. Review the manufacturer's configuration-security guidance and validate the update mechanism against the complete system threat model.
Recomendado
Gigabit Ethernet Control Plane
The M2GL025-1FG484I can support control-plane functions associated with Gigabit Ethernet designs, including packet handling, descriptor management, status aggregation, and ancillary control logic. Its 27.6K logic elements are well suited to parallel packet-processing pipelines, while 267 I/O provide ample lanes for interface control, interrupts, and configuration status. The flash-based IGLOO2 architecture permits standalone boot and simplifies board partitioning. A production design must confirm the required Ethernet interface standard, clocking arrangement, and I/O timing against the IGLOO2 documentation rather than assuming every high-speed protocol is available on every pin. Microchip's IGLOO2 family materials specifically identify Gigabit Ethernet control-plane use as a suitable general-purpose application.
Recomendado
Medical and Diagnostic Equipment Control
The M2GL025-1FG484I is suitable for control and monitoring logic in medical or diagnostic equipment where parallel sensor interfaces, timing, and isolation between subsystems are important. The 267 I/O support numerous sensor inputs and actuator-control signals, while 27,696 logic elements allow local implementation of acquisition sequencing, alarm handling, and data routing. On-chip flash configuration reduces the external component count in space-constrained instruments. The industrial-temperature designation must still be checked against the specific medical-equipment environmental requirement and applicable regulatory design process. Any patient-contact or diagnostic decision function should remain under validated system controls rather than relying solely on unverified programmable logic.
Recomendado
Aerospace and Defense Data Processing
The M2GL025-1FG484I can be evaluated for aerospace, defense, and aviation data-processing modules that need programmable logic close to a sensor or communication interface. The 27.6K logic-element device supports parallel data conditioning, protocol conversion, monitoring, and fault-logging functions, while 267 I/O reduce external routing complexity. Its flash configuration enables autonomous operation after power-up, which is useful in systems with strict initialization sequencing. Qualification and traceability must follow the exact Microchip ordering code, program, and applicable aerospace procurement requirements; the industrial-temperature suffix alone does not establish flight qualification. Review radiation, temperature, life-cycle, and screening requirements with the program authority before releasing a design.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para M2GL025-1FG484I — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | M2GL025-1FGG484I | M2GL025-FG484I | M2GL025-FGG484I | M2GL025-1FG484 | M2GL025-FG484 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 484-ball BGA | 484-ball BGA - same | 484-ball BGA - same | 484-ball BGA - same | 484-ball BGA - same | 484-ball BGA - same |
| Device Family | IGLOO2 Low Density Flash FPGA | IGLOO2 Low Density Flash FPGA | IGLOO2 Low Density Flash FPGA | IGLOO2 Low Density Flash FPGA | IGLOO2 Low Density Flash FPGA | IGLOO2 Low Density Flash FPGA |
| Logic Elements | 27,696 | 27,696 | 27,696 | 27,696 | 27,696 | 27,696 |
| User I/O | 267 | 267 | 267 | 267 | 267 | 267 |
| Temperature Grade | Industrial | Industrial | Industrial | Industrial | Commercial | Commercial |
| Configuration Memory | On-chip flash | On-chip flash | On-chip flash | On-chip flash | On-chip flash | On-chip flash |
Principais diferenciais
- Retains both the explicit speed grade 1 and industrial-temperature positioning (vs M2GL025-1FG484)
- Provides 267 user I/O in a 484-ball BGA for interface-rich designs (vs M2GL025-1FGG484I)
- Uses on-chip flash configuration for autonomous startup (vs M2GL025-FG484)
Notas de projeto
Treat the 484-ball BGA as a controlled-impedance and assembly-critical layout. Select a fanout strategy with the PCB fabricator, define the land pattern from Microchip's package drawing, and reserve via-in-pad or dog-bone options according to the assembly process. Route supply and ground networks with low inductance and place decoupling directly across the relevant package pins. Do not derive the land pattern from a generic BGA library because ball-pitch and pad-definition details are device-specific.
Separate the 1.2 V core supply requirements from VDDI bank requirements and assign each bank only the I/O standards allowed by its voltage and pins. Microchip application note AC402 emphasizes using the correct VDDI supply for equivalent banks during IGLOO2 migration. Verify current capacity, sequencing, noise sensitivity, and permitted I/O combinations in the power and pin-description documentation before assigning high-current or high-speed interfaces.
Do not treat every 484-ball M2GL025 ordering code as an automatic substitution. Speed grade, temperature grade, package code, and supported I/O features can differ even when logic density and ball count match. Use the Microchip ordering guide to confirm the exact M2GL025-1FG484I suffix combination and review application note AC402 before migrating to another density or package. Commercial-temperature parts should not replace industrial-temperature parts without an environmental requalification.
Assign high-speed interfaces only after checking the IGLOO2 Packaging and Pin Descriptions User Guide for bank membership, differential-pair availability, clock-capable pins, and power constraints. Keep sensitive or reference clock routes away from noisy switching and processor buses where practical, maintain controlled differential spacing, and avoid unnecessary stubs. Because the pin list covers 484 balls, use the manufacturer table throughout schematic capture and PCB review rather than entering only the 267 user I/O.
Create a signal-integrity budget for each interface rather than relying on the FPGA's aggregate logic capability. Include source-synchronous clocking, skew, voltage references, I/O drive strength, termination, and board loss in the analysis. Migration between M2GL025 density variants may reduce the compatible feature set of certain pins even when the package footprint is shared, so repeat constraint and timing checks for the final selected part.
Informações de conformidade
The manufacturer product page identifies the M2GL025 family as in production. Specific RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 statements were not identified in the referenced product listings.