Microchip Technology

M2GL025-1FG484I - 27.6K LEs, 267 I/O IGLOO2 FPGA | Microchip

MPN: M2GL025-1FG484I ✓ 啟用中
1.2 V Vdss 484-ball BGA Package 1 Speed On-chip flash Memory
MOQ: 1 |

M2GL025-1FG484I 概覽

The Microchip Technology M2GL025-1FG484I is a low-density IGLOO2 flash FPGA with 27,696 logic elements, 267 user I/O, and a 1.2 V core supply in a 484-ball BGA package. The -1 suffix identifies the speed grade, while the I suffix identifies the industrial-temperature version. Microchip lists the M2GL025 family as in production for communications, industrial, medical, defense, and aviation systems.

An FPGA is a reprogrammable semiconductor whose logic, routing, and I/O blocks are configured after manufacture. Within the semiconductor hierarchy, the M2GL025-1FG484I is a field-programmable gate array, an FPGA, and a programmable-logic device. Its on-chip flash configuration memory allows the device to retain its configuration without an external configuration PROM, making it suitable for standalone control, bridging, I/O expansion, protocol conversion, and system-management designs.

The device provides 27,696 logic elements and 267 I/O in a 484-ball BGA package. These figures support dense parallel interfaces and multiple independent I/O standards, while the large ball count provides extensive power, ground, configuration, and user-I/O connections. The industrial-temperature designation permits operation in temperature-qualified industrial equipment, subject to the operating limits listed in the Microchip IGLOO2 documentation.

Microchip positions the IGLOO2 family for general-purpose functions including bridging, I/O expansion and conversion, system management, secure connectivity, video and image processing, Gigabit Ethernet control, and dual PCI Express control planes. Its flash-based configuration architecture simplifies board design by removing a mandatory external configuration memory device and allows field updates when the host system supports reconfiguration.

Designers should treat the 484-ball BGA as a fine-pitch layout challenge. Fanout, via-in-pad, solder-mask-defined pads, and assembly capability must be coordinated with the board manufacturer. Pin, bank, differential-I/O, and power-assignment decisions should follow the IGLOO2 packaging and pin-description user guide rather than relying on generic BGA assumptions.

For migration within the IGLOO2 family, verify the exact speed grade, temperature range, package code, and supported I/O standards at the substituted position. Microchip application note AC402 describes migration constraints between M2GL025, M2GL050, and M2GL090 devices, including the importance of using the correct VDDI supply for equivalent banks.

This page combines the device architecture, package details, family migration considerations, structured alternatives, and practical PCB guidance to support faster component selection and design review. Use the manufacturer datasheet, pin-description user guide, and application note AC402 for authoritative implementation details.

直接替換替代品,適用於 M2GL025-1FG484I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: M2GL025-1FG484I (相同外形與佔位) — 差異在於 Device Type, Product Family, Configuration Memory, Logic Elements, Package.

Microchip Technology
Device Type: IGLOO2 Low Density Field-Programmable Gate Array (FPGA)
Logic Elements: 27,696 LE
Package: FG484, 484-FPBGA
比較對象 M2GL025-1FG484I →
Microchip Technology
Device Type: Field Programmable Gate Array (FPGA)
Product Family: Low Density FPGA
Configuration Memory: Embedded flash
比較對象 M2GL025-1FG484I →
Microchip Technology
Device Type: IGLOO2 flash-based field-programmable gate array
Product Family: IGLOO2 low-density FPGA
Configuration Memory: Flash-based configuration memory
比較對象 M2GL025-1FG484I →

M2GL025-1FGG484I

✅ 直接替換
📦 484-ball BGA
Same 27.6K LE and 267 I/O configuration with speed grade 1 and industrial temperature; package-code characters differ by 0%, but ordering codes require final confirmation

📋 參考替代品(不在目錄中)

M2GL025-FG484I

✅ 直接替換
Microchip Technology
📦 484-ball BGA
IGLOO2 flash-based field-programmable gate array · 27,696 logic elements · 267 I/O · 1.2 V · 484-ball BGA · FPBGA · Square · Ball

聯絡詢價

查看資料表 →

M2GL025-FGG484I

✅ 直接替換
📦 484-ball BGA
Same 27.6K LE density, 267 I/O, 1.2 V core, and industrial-temperature positioning; ordering code omits the explicit -1 speed designation, with no logic-capacity difference

📋 參考替代品(不在目錄中)

M2GL025-1FG484

✅ 直接替換
Microchip Technology
📦 484-ball BGA
IGLOO2 Low Density Field-Programmable Gate Array (FPGA) · 27,696 LE · 267 I/O · 1.14 V to 2.625 V · 1.2 V · Grade 1 · 0 °C to 85 °C junction · FG484, 484-FPBGA

聯絡詢價

查看資料表 →

M2GL025-FG484

✅ 直接替換
Microchip Technology
📦 484-ball BGA
IGLOO2 · 27,696 cells · 267 I/O · 1.2 V · Embedded flash · Field Programmable Gate Array (FPGA) · 484-pin FBGA · FBGA

聯絡詢價

查看資料表 →

M2GL025-1FG484I 最大額定值與電氣特性

Device Type IGLOO2 Low Density Flash FPGA
Logic Elements 27,696 (27.6K LEs)
User I/O Count 267
Core Supply Voltage 1.2 V
Speed Grade 1
Temperature Grade Industrial
封裝 484-ball BGA
安裝類型 Surface Mount
Configuration Memory On-chip flash
Programmable Logic FPGA
Product Family IGLOO2
Manufacturer Status In Production

M2GL025-1FG484I 484-ball bga 腳位配置指南

M2GL025-1FG484I(484-ball bga 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

M2GL025-1FG484I 的 484-ball bga 封裝腳位圖

無詳細腳位定義資料: M2GL025-1FG484I.

請參閱 資料表 以查看完整腳位配置。

典型應用

M2GL025-1FG484I 適用於 6 應用s: Industrial Protocol Bridging, Video and Image Interface Conversion, System Management and Security Control, Gigabit Ethernet Control Plane, Medical and Diagnostic Equipment Control, Aerospace and Defense Data Processing.

🏭

Industrial Protocol Bridging

The M2GL025-1FG484I fits industrial bridges that translate between incompatible fieldbus, serial, parallel, or legacy peripheral interfaces. Its 27,696 logic elements provide substantial capacity for clock-domain crossing, protocol state machines, data buffering, and diagnostics, while 267 I/O support parallel control and communication channels. The on-chip flash configuration allows the bridge to operate without a separate configuration PROM. In an industrial enclosure, the I temperature suffix is appropriate as the starting point, subject to the manufacturer's operating-limit table. Use Microchip's pin-description guide when assigning bank power and differential signals because the electrical standard supported by each I/O must be verified for the selected design.

📺

Video and Image Interface Conversion

The M2GL025-1FG484I is suitable for pixel-format conversion, timing generation, parallel-to-serial interface logic, and sensor data aggregation. The 27.6K logic-element count gives designers room for multiple parallel input channels, line buffers implemented with available memory resources, and control logic, while 267 I/O reduce the need for external I/O expanders. Its flash-based configuration supports deterministic operation after power-up and simplifies maintenance of field logic. The 484-ball BGA also provides a high pin count for power distribution and high-speed interface assignments. Exact supported I/O standards, achievable clock rates, and internal memory capacities must be checked in the IGLOO2 device documentation before committing a high-speed video timing budget.

🔒

System Management and Security Control

The M2GL025-1FG484I can implement power sequencing, fault detection, watchdog control, secure boot support, and peripheral supervision in an embedded control platform. With 27,696 logic elements, a single device can combine multiple supervisory functions without relying on separate small logic ICs, and the 267 available I/O are useful for monitoring numerous reset, alarm, and interlock signals. On-chip flash configuration allows the management logic to remain available after power cycling. For security-oriented designs, include the device within a protected boot and update process rather than treating programmable logic as an isolated trust anchor. Review the manufacturer's configuration-security guidance and validate the update mechanism against the complete system threat model.

🌐

Gigabit Ethernet Control Plane

The M2GL025-1FG484I can support control-plane functions associated with Gigabit Ethernet designs, including packet handling, descriptor management, status aggregation, and ancillary control logic. Its 27.6K logic elements are well suited to parallel packet-processing pipelines, while 267 I/O provide ample lanes for interface control, interrupts, and configuration status. The flash-based IGLOO2 architecture permits standalone boot and simplifies board partitioning. A production design must confirm the required Ethernet interface standard, clocking arrangement, and I/O timing against the IGLOO2 documentation rather than assuming every high-speed protocol is available on every pin. Microchip's IGLOO2 family materials specifically identify Gigabit Ethernet control-plane use as a suitable general-purpose application.

💊

Medical and Diagnostic Equipment Control

The M2GL025-1FG484I is suitable for control and monitoring logic in medical or diagnostic equipment where parallel sensor interfaces, timing, and isolation between subsystems are important. The 267 I/O support numerous sensor inputs and actuator-control signals, while 27,696 logic elements allow local implementation of acquisition sequencing, alarm handling, and data routing. On-chip flash configuration reduces the external component count in space-constrained instruments. The industrial-temperature designation must still be checked against the specific medical-equipment environmental requirement and applicable regulatory design process. Any patient-contact or diagnostic decision function should remain under validated system controls rather than relying solely on unverified programmable logic.

✈️

Aerospace and Defense Data Processing

The M2GL025-1FG484I can be evaluated for aerospace, defense, and aviation data-processing modules that need programmable logic close to a sensor or communication interface. The 27.6K logic-element device supports parallel data conditioning, protocol conversion, monitoring, and fault-logging functions, while 267 I/O reduce external routing complexity. Its flash configuration enables autonomous operation after power-up, which is useful in systems with strict initialization sequencing. Qualification and traceability must follow the exact Microchip ordering code, program, and applicable aerospace procurement requirements; the industrial-temperature suffix alone does not establish flight qualification. Review radiation, temperature, life-cycle, and screening requirements with the program authority before releasing a design.

What is the M2GL025-1FG484I?
The M2GL025-1FG484I is a Microchip IGLOO2 low-density flash FPGA with 27,696 logic elements, 267 user I/O, and a 484-ball BGA package. According to the Microchip product page, the M2GL025 family is in production and is intended for general-purpose programmable logic in communications, industrial, medical, defense, and aviation equipment. Its on-chip flash configuration memory allows the FPGA to operate without a mandatory external configuration PROM.
How many logic elements and I/O pins does the M2GL025-1FG484I have?
The M2GL025-1FG484I contains 27,696 logic elements and provides 267 user I/O in its 484-ball BGA package. The logic-element count is also presented by distributors as 27.6K LEs. The 484-ball package includes user I/O together with configuration, supply, and ground connections, so PCB layout must be based on the complete manufacturer pin table rather than on the user-I/O count alone.
What does the -1 and I suffix mean for M2GL025-1FG484I?
The -1 identifies the M2GL025 speed grade, and the final I identifies the industrial-temperature variant. The FG484 portion identifies the 484-ball BGA package configuration. Microchip's family documentation should be consulted for the exact operating limits and timing values associated with the -1 grade, because a package-compatible variant with a different speed or temperature suffix may require different design conditions.
Where can I download the M2GL025-1FG484I datasheet and pin information?
The authoritative starting point is the Microchip M2GL025 product page at https://www.microchip.com/en-us/product/M2GL025. For exact package assignments, the IGLOO2 FPGA Packaging and Pin Descriptions User Guide is available through Microchip's document download system. Use the package pin table, bank assignments, differential I/O rules, and power requirements before assigning PCB functions or power rails.
Can the M2GL025-1FG484I be used as a drop-in replacement for M2GL025-FG484?
The M2GL025-FG484 is not a temperature-equivalent substitution for the M2GL025-1FG484I because the target device carries the industrial-temperature suffix, while M2GL025-FG484 lacks that designation. Although both use the 484-ball package family, a PCB that must retain industrial-temperature operation should not be populated with a commercial-temperature part without a documented temperature-budget review.
What is the best drop-in replacement for M2GL025-1FG484I?
The closest drop-in choices are M2GL025-1FGG484I, M2GL025-FG484I, and M2GL025-FGG484I because they remain in the M2GL025 IGLOO2 family and use the 484-ball package. Selection still depends on whether the exact speed-grade and industrial-temperature suffixes must be preserved. Confirm package code, timing grade, temperature grade, and pin compatibility against the Microchip ordering guide before substitution.
What can replace the M2GL025-1FG484I on the same PCB footprint?
A same-footprint replacement should come from the M2GL025 IGLOO2 family in the 484-ball package, such as M2GL025-1FGG484I or an appropriately qualified M2GL025-FG484I variant. Cross-brand replacement is not supported by the available family documentation because FPGA configuration memories, I/O standards, bank assignments, and timing specifications are device-specific. A mechanical fit alone does not establish functional drop-in compatibility.
M2GL025-1FG484I vs M2GL025-1FGG484I - which is the better choice?
The M2GL025-1FGG484I is the preferred option when the goal is to preserve the M2GL025 IGLOO2 architecture, speed grade, and industrial-temperature positioning within the 484-ball package family. The exact ordering-code characters must still be checked in the Microchip documentation because package suffixes can encode more than outline dimensions. Both parts share the core density, while their ordering suffixes identify the specific grade combinations.
Is the M2GL025-1FG484I suitable for industrial applications?
The M2GL025-1FG484I is designated as an industrial-temperature version, making it the appropriate starting point for industrial equipment when its full operating limits satisfy the design environment. Its 267 I/O and 27,696 logic elements suit control, bridging, I/O expansion, protocol conversion, and system-management functions. Confirm the junction, ambient, and power conditions in the Microchip datasheet before releasing a production design.
When should I choose M2GL025-1FG484I instead of another FPGA?
Choose the M2GL025-1FG484I when a design needs flash-based configuration, approximately 27.6K logic elements, 267 user I/O, and a 484-ball BGA footprint in an industrial-temperature implementation. It is a strong fit for protocol bridges, I/O concentrators, industrial controllers, and image or video interface logic. Choose a different device only when its logic capacity, I/O standards, memory, speed, or package is required.
What are the key specifications engineers should know about the M2GL025-1FG484I?
The key specifications are 27,696 logic elements, 267 user I/O, a 1.2 V core supply, speed grade 1, an industrial-temperature designation, on-chip flash configuration, and a 484-ball BGA package. Microchip identifies the device as an IGLOO2 low-density FPGA intended for general-purpose logic, bridging, I/O expansion, system management, and secure connectivity. Detailed timing, memory, and I/O standard values must be taken from the family documentation.
How should a 484-ball BGA M2GL025-1FG484I PCB be laid out?
The 484-ball BGA requires a fine-pitch layout process with a fanout strategy matched to the PCB stack-up and assembly capability. Reserve decoupling close to the device supply pins, keep sensitive interfaces away from noisy switching paths where practical, and follow the manufacturer's recommended land pattern. Because the package exposes configuration, supply, ground, and user I/O, use the complete manufacturer pin table when assigning every ball.
Does the M2GL025-1FG484I need an external configuration PROM?
No external configuration PROM is required for normal operation because the IGLOO2 device uses on-chip flash configuration memory. This simplifies the board by eliminating a mandatory parallel configuration PROM and its associated routing. The system still needs a valid configuration in the device before user logic operates, and designs supporting field updates should follow Microchip's recommended configuration and JTAG programming procedures.
Where can I buy the M2GL025-1FG484I and check current lead time?
Use the Request a Quote form on this page to request current availability, a volume quotation, and the latest lead time for the M2GL025-1FG484I. The manufacturer's product page confirms that the M2GL025 family is in production, but production status does not guarantee immediate allocation. Provide the required quantity, shipping destination, and whether tray or another packing method is needed when submitting the request.
Is there an Lattice or AMD equivalent for the M2GL025-1FG484I?
No cross-brand equivalent can be recommended from the available Microchip IGLOO2 documentation. The M2GL025-1FG484I combines flash configuration, a defined 484-ball footprint, 267 user I/O, and device-specific bank and timing rules with a programmable logic architecture. A competitor device may offer similar logic capacity, but mechanical package similarity does not establish configuration, I/O, software-tool, or timing compatibility.

工程參考資料,適用於 M2GL025-1FG484I — 比較、設計指引及合規資訊。

選型指南

Choose the M2GL025-1FG484I when the design needs a flash-configured IGLOO2 FPGA with 27,696 logic elements, 267 user I/O, speed grade 1, industrial-temperature qualification, and a 484-ball BGA footprint. It is well suited to industrial protocol bridges, video interface conversion, system-management logic, and network control-plane functions. Choose M2GL025-1FGG484I when its exact ordering code is the preferred footprint-compatible form while retaining the same family characteristics. Choose M2GL025-FG484I or M2GL025-FGG484I only after confirming the required speed grade against the manufacturer documentation. M2GL025-1FG484 and M2GL025-FG484 share the package and logic density but use commercial-temperature ordering codes, so they are appropriate only when the environmental requirement permits that grade. For a cross-brand substitution, do not rely on package fit alone; flash architecture, timing constraints, I/O standards, bank voltage, and software support would all require independent verification.

與替代品比較

參數 本產品 M2GL025-1FGG484I M2GL025-FG484I M2GL025-FGG484I M2GL025-1FG484 M2GL025-FG484
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 484-ball BGA 484-ball BGA - same 484-ball BGA - same 484-ball BGA - same 484-ball BGA - same 484-ball BGA - same
Device Family IGLOO2 Low Density Flash FPGA IGLOO2 Low Density Flash FPGA IGLOO2 Low Density Flash FPGA IGLOO2 Low Density Flash FPGA IGLOO2 Low Density Flash FPGA IGLOO2 Low Density Flash FPGA
Logic Elements 27,696 27,696 27,696 27,696 27,696 27,696
User I/O 267 267 267 267 267 267
Temperature Grade Industrial Industrial Industrial Industrial Commercial Commercial
Configuration Memory On-chip flash On-chip flash On-chip flash On-chip flash On-chip flash On-chip flash

主要差異化特點

  • Retains both the explicit speed grade 1 and industrial-temperature positioning (對比M2GL025-1FG484)
  • Provides 267 user I/O in a 484-ball BGA for interface-rich designs (對比M2GL025-1FGG484I)
  • Uses on-chip flash configuration for autonomous startup (對比M2GL025-FG484)

設計說明

Treat the 484-ball BGA as a controlled-impedance and assembly-critical layout. Select a fanout strategy with the PCB fabricator, define the land pattern from Microchip's package drawing, and reserve via-in-pad or dog-bone options according to the assembly process. Route supply and ground networks with low inductance and place decoupling directly across the relevant package pins. Do not derive the land pattern from a generic BGA library because ball-pitch and pad-definition details are device-specific.

Separate the 1.2 V core supply requirements from VDDI bank requirements and assign each bank only the I/O standards allowed by its voltage and pins. Microchip application note AC402 emphasizes using the correct VDDI supply for equivalent banks during IGLOO2 migration. Verify current capacity, sequencing, noise sensitivity, and permitted I/O combinations in the power and pin-description documentation before assigning high-current or high-speed interfaces.

Do not treat every 484-ball M2GL025 ordering code as an automatic substitution. Speed grade, temperature grade, package code, and supported I/O features can differ even when logic density and ball count match. Use the Microchip ordering guide to confirm the exact M2GL025-1FG484I suffix combination and review application note AC402 before migrating to another density or package. Commercial-temperature parts should not replace industrial-temperature parts without an environmental requalification.

Assign high-speed interfaces only after checking the IGLOO2 Packaging and Pin Descriptions User Guide for bank membership, differential-pair availability, clock-capable pins, and power constraints. Keep sensitive or reference clock routes away from noisy switching and processor buses where practical, maintain controlled differential spacing, and avoid unnecessary stubs. Because the pin list covers 484 balls, use the manufacturer table throughout schematic capture and PCB review rather than entering only the 267 user I/O.

Create a signal-integrity budget for each interface rather than relying on the FPGA's aggregate logic capability. Include source-synchronous clocking, skew, voltage references, I/O drive strength, termination, and board loss in the analysis. Migration between M2GL025 density variants may reduce the compatible feature set of certain pins even when the package footprint is shared, so repeat constraint and timing checks for the final selected part.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The manufacturer product page identifies the M2GL025 family as in production. Specific RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 statements were not identified in the referenced product listings.

相關搜尋

m2gl025 fgg484i m2gl025 vfg256i m2gl025 1vfg400i m2gl025 fcsg325i m2gl025 fgg484 m2gl025 datasheet M2GL025-1FG484I datasheet M2GL025-1FG484I pinout M2GL025-1FG484I 484 BGA footprint M2GL025-1FG484I equivalent M2GL025-1FG484I replacement M2GL025-1FG484I vs M2GL025-1FGG484I Microchip M2GL025-1FG484I price M2GL025-1FG484I stock M2GL025-1FG484I application circuit

相關元件與詞彙

Microchip Technology M2GL025-1FG484I M2GL025-1FGG484I M2GL025-FG484I M2GL025-FGG484I M2GL025-1FG484 M2GL025-FG484 IGLOO2 Field-Programmable Gate Array FPGA Flash FPGA Programmable Logic Device 27,696 logic elements 267 user I/O 484-ball BGA BGA package family Surface Mount On-chip flash configuration 1.2 V core supply VDDI Industrial temperature grade Speed grade 1 Microchip application note AC402 IGLOO2 Packaging and Pin Descriptions User Guide Industrial protocol bridging Video and image interface conversion Gigabit Ethernet control plane System management
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情