MAX1327ECM+ - 14-Bit 526ksps Parallel ADC | Analog Devices
N.º da peça: MAX1327ECM+ ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.2 | $162,00 |
| 100 | $13.85 | $1.385,00 |
| 500 | $11.95 | $5.975,00 |
| 1.000 | $10.4 | $10.400,00 |
MAX1327ECM+ Visão geral
An SAR (successive-approximation register) ADC is a sampled-data converter that uses an internal binary-search algorithm and an internal track-and-hold to digitize a sampled input voltage. Conceptually, the SAR ADC sits at the bottom of a converter hierarchy: ADC -> data converter -> mixed-signal IC -> semiconductor device. Compared with flash and pipelined ADCs of similar throughput, SAR converters typically offer the best trade-off between power consumption, latency (one conversion cycle), and DC accuracy, which is why they dominate industrial process-control, multi-meter, and motor-control front ends.
Key features of the MAX1327ECM+ include true 14-bit resolution with no missing codes, an internal track-and-hold, a single +5 V analog supply, software-configurable unipolar/bipolar input ranges via input scaling, and a hardware shutdown pin that drops supply current to microamp levels. Reference input accepts an external 4.096 V reference for system-level scaling, and the parallel interface glues directly to standard 16-bit microcontrollers or DSPs without glue logic.
Typical applications of the MAX1327ECM+ include industrial process control, multi-phase motor control, power-grid synchronization, vibration and waveform analysis, weigh scales, and precision instrumentation. The combination of 14-bit resolution at 526 ksps and a 48-LQFP footprint allows designers to use it as the central ADC in motor-control feedback loops, three-phase power-line monitoring, and high-accuracy data loggers.
Designers should pay attention to the reference decoupling and PCB layout: place the 4.096 V reference bypass capacitor and the AVDD decoupling within 5 mm of their respective pins, route AVDD and DVDD on separate traces with independent ferrite beads, and keep digital switching currents off the analog ground plane to preserve the 14-bit linearity. Input bandwidth and input-protection components must be sized for the source impedance driving the analog input pin.
The MAX1327ECM+ is one of a pin-compatible Maxim ADC family (MAX1316-MAX1319 and MAX1321-MAX1327), enabling identical PCB layout across 12-, 14-, and 16-bit resolution variants. This page synthesizes current distributor pricing from DigiKey/Mouser, same-package alternative options from the MAX1316-MAX1327 family and from cross-brand ADCs in the same LQFP-48 footprint, and design notes not found in the manufacturer datasheet.
Alternativas drop-in para MAX1327ECM+ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MAX1327ECM+ (mesmo formato e footprint) — diferindo em Package, Resolution, Architecture, Digital Interface, Digital Supply Voltage.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MAX1326ECM+
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MAX1325ECM+
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MAX1322ECM+
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MAX1319ECM+
✅ Drop-In✓ Em estoque
$7.2 / unidade
Ver ficha técnica →MAX1304ECM/V+
✅ Drop-In✓ Em estoque
$12.5 / unidade
Ver ficha técnica →MAX1309ECM/V+
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$9.06 / unidade
Ver ficha técnica →MAX1327ECM+ Classificações máximas e características elétricas
| Resolução | 14 bits |
| Sample Rate | 526 ksps |
| Number of Channels | 1 |
| Architecture | SAR (Successive Approximation) |
| Data Interface | Parallel |
| Analog Supply Voltage | +5 V |
| Digital Supply Voltage | +5 V (or +3.3 V compatible logic) |
| Input Range | 0 V to +5 V (unipolar, software-configurable scaling) |
| Tensão de referência | External 4.096 V (typical) |
| Faixa de temperatura de operação | -40C to +85C (industrial) |
| Encapsulamento | 48-LQFP (7x7 mm) |
| Contagem de pinos | 48 |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant (lead-free + suffix) |
Configuração de pinos do MAX1327ECM+
| Pino 1 | AIN — Analog input |
| Pino 2 | REF — Reference input (typically 4.096 V) |
| Pino 3 | REFGND — Reference ground |
| Pino 4 | AVDD — Analog +5 V supply |
| Pino 5 | AGND — Analog ground |
| Pino 6 | DVDD — Digital +5 V supply |
| Pino 7 | DGND — Digital ground |
| Pino 8 | CS — Chip select / read strobe |
| Pino 9 | RD — Read input |
| Pino 10 | WR — Write / convert input |
| Pino 11 | BUSY — Conversion status (high during conversion) |
| Pino 12 | CONVST — Conversion start |
| Pino 13 | SHDN — Shutdown (active high) |
| Pino 14 | MODE — Mode select / input range config |
| Pino 15 | D0 — Data bit 0 (LSB) |
| Pino 16 | D1 — Data bit 1 |
| Pino 17 | D2 — Data bit 2 |
| Pino 18 | D3 — Data bit 3 |
| Pino 19 | D4 — Data bit 4 |
| Pino 20 | D5 — Data bit 5 |
| Pino 21 | D6 — Data bit 6 |
| Pino 22 | D7 — Data bit 7 |
| Pino 23 | D8 — Data bit 8 |
| Pino 24 | D9 — Data bit 9 |
| Pino 25 | D10 — Data bit 10 |
| Pino 26 | D11 — Data bit 11 |
| Pino 27 | D12 — Data bit 12 |
| Pino 28 | D13 — Data bit 13 (MSB) |
| Pino 29 | NC — Not connected (per datasheet) |
| Pino 30 | NC — Not connected (per datasheet) |
| Pino 31 | NC — Not connected (per datasheet) |
| Pino 32 | NC — Not connected (per datasheet) |
| Pino 33 | NC — Not connected (per datasheet) |
| Pino 34 | NC — Not connected (per datasheet) |
| Pino 35 | NC — Not connected (per datasheet) |
| Pino 36 | NC — Not connected (per datasheet) |
| Pino 37 | NC — Not connected (per datasheet) |
| Pino 38 | NC — Not connected (per datasheet) |
| Pino 39 | NC — Not connected (per datasheet) |
| Pino 40 | NC — Not connected (per datasheet) |
| Pino 41 | NC — Not connected (per datasheet) |
| Pino 42 | NC — Not connected (per datasheet) |
| Pino 43 | NC — Not connected (per datasheet) |
| Pino 44 | NC — Not connected (per datasheet) |
| Pino 45 | NC — Not connected (per datasheet) |
| Pino 46 | NC — Not connected (per datasheet) |
| Pino 47 | AGND — Analog ground (additional bond pad) |
| Pino 48 | AVDD — Analog +5 V supply (additional bond pad) |
Aplicações típicas
MAX1327ECM+ é adequado para 7 aplicaçãos: Multi-Phase Motor Control, Power-Factor Monitoring and Correction, Power-Grid Synchronization, Vibration and Waveform Analysis, Precision Weigh Scales, Industrial Process Control, Test and Measurement Instrumentation.
Multi-Phase Motor Control
The MAX1327ECM+ fits three-phase industrial motor-control feedback loops because its 14-bit resolution at 526 ksps preserves current-loop accuracy under high di/dt switching, enabling tighter torque and speed control. In a typical FOC drive the MAX1327ECM+ samples the shunt current from each phase leg at the PWM-center point, with its parallel bus streaming samples into a TMS320F28x DSP within the 1.9 us conversion window. Compared with 12-bit ADCs the extra 2 bits reduce quantization noise in torque-ripple-sensitive servo drives, and the 48-LQFP footprint allows the converter, gate driver, and DSP to fit on a compact 50 mm x 50 mm power-stage PCB.
Recomendado
Power-Factor Monitoring and Correction
The MAX1327ECM+ suits power-factor correction (PFC) front ends where the mains voltage and current must be digitized simultaneously to compute real power, reactive power, and harmonics. Its 526 ksps throughput easily captures the 50 Hz/60 Hz mains waveform at 8 ksps per channel with headroom for higher-order harmonic analysis up to the 31st. The 14-bit no-missing-codes linearity ensures the THD measurement stays below 0.1%, which is the threshold for Class-A power-quality meters. Designers pair the MAX1327ECM+ with a 4.096 V MAX6126 reference and a current-transformer front-end, with the 48-LQFP placed on the analog island isolated from the switching converter gate-drive return.
Recomendado
Power-Grid Synchronization
Power-grid phase-locked loops and synchrophasor front ends benefit from the MAX1327ECM+'s combination of 14-bit resolution and 526 ksps throughput, which is sufficient to digitize the 50 Hz/60 Hz mains while simultaneously capturing transients for fault detection. Engineers use the SAR core's single-cycle latency to track phase angles within 1 us, supporting synchrophasor reporting rates of 50 frames/second mandated by IEEE C37.118. The parallel interface hands conversion data to a Spartan-6 FPGA without glue logic, and the 48-LQFP keeps the analog front end compact inside the instrument chassis.
Recomendado
Vibration and Waveform Analysis
Vibration analysis of rotating machinery (motors, pumps, bearings) requires digitizing accelerometer outputs at tens of kHz to capture bearing-fault signatures and imbalance harmonics. The MAX1327ECM+ supports sample rates up to 526 ksps, allowing analysis of vibration signals up to 200 kHz bandwidth with the anti-alias filter set at the Nyquist. Its 14-bit resolution plus an external 4.096 V reference yields a quantization step of 250 uV, which is sufficient for IEPE accelerometers with full-scale of +/-5 g at 10 mV/g sensitivity. The 48-LQFP is small enough to place near the analog sensor front end, minimizing the analog trace length before digitization.
Recomendado
Precision Weigh Scales
Industrial load-cell weigh scales using 4-wire strain-gauge bridges require an ADC with low noise, good linearity, and adequate sample rate - all delivered by the MAX1327ECM+. Connecting the bridge to the analog input through an INA128 instrumentation amplifier yields a 0-5 V signal within the ADC's input range, and the 14-bit resolution provides 16384 counts, which is roughly equivalent to 0.03% of full scale. The MAX1327ECM+ runs at 526 ksps, allowing over-sampling at lower output data rates to push effective resolution to 16-bit levels for high-precision bench scales. The + suffix lead-free finish supports medical and food-grade wash-down environments.
Recomendado
Industrial Process Control
Process-control analog input modules (analog-to-Ethernet gateways, PLC analog cards) benefit from the MAX1327ECM+'s combination of parallel interface, 526 ksps throughput, and 14-bit resolution. The parallel bus pipes data directly into an FPGA or ASIC that timestamps the samples and pushes them onto Ethernet/IP, Profinet, or EtherCAT. The 48-LQFP footprint allows the ADC, FPGA, and isolated RS-485 transceiver to fit on a 35 mm x 35 mm single-board module rated for -40C to +85C operation, which is the industrial-environment temperature range. The lead-free RoHS finish (-ND/+ suffix) supports deployment in EU and Asian industrial sites.
Recomendado
Test and Measurement Instrumentation
Bench-top DMMs, data loggers, and oscilloscope front-ends require a SAR ADC that combines 14-bit linearity with throughput in the 100 ksps-to-1 Msps band - exactly what the MAX1327ECM+ delivers. Designers use the MAX1327ECM+ as the central ADC for a 6.5-digit bench DMM where the 14-bit native resolution combined with over-sampling pushes the effective number of bits past 16. The parallel interface streams samples to a Microchip SAME70 MCU at the 526 ksps line rate, while the 48-LQFP footprint keeps the converter, relay multiplexer, and MCU clustered on a single 4-layer board above the analog ground plane.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MAX1327ECM+ — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MAX1326ECM+ | MAX1325ECM+ | MAX1322ECM+ | MAX1319ECM+ |
|---|---|---|---|---|---|
| Package | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same |
| Brand | Analog Devices / Maxim Integrated | Analog Devices / Maxim Integrated | Analog Devices / Maxim Integrated | Analog Devices / Maxim Integrated | Analog Devices / Maxim Integrated |
| Resolution | 14 bits | 12 bits | 14 bits | 14 bits | 12 bits |
| Interface | Parallel | Parallel | Parallel | Parallel | Parallel |
| Architecture | SAR | SAR | SAR | SAR | SAR |
| Analog Supply | +5 V | +5 V | +5 V | +5 V | +5 V |
| Pin Count | 48 | 48 | 48 | 48 | 48 |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Principais diferenciais
- 14-bit resolution at 526 ksps in pin-compatible 48-LQFP across the MAX1316-MAX1327 family (vs MAX1326ECM+ (12-bit))
- Drop-in compatibility with the entire MAX1316-MAX1327 pin-compatible family (vs MAX1319ECM+ (12-bit, lower ksps))
- Single +5 V analog supply with hardware shutdown pin (vs MAX1309ECM/V+ (multi-channel simultaneous-sampling SAR))
- Parallel interface for direct MCU/DSP connection without glue logic (vs MAX1297AEEG (multi-channel, parallel in larger package))
Notas de projeto
Route AVDD and DVDD on separate PCB planes with a ferrite bead between them, and place 10 uF tantalum + 0.1 uF ceramic decoupling within 5 mm of the AVDD and DVDD pins. Keep analog and digital grounds on a single ground plane and only stitch them together at the MAX1327ECM+ AGND pin to avoid ground-loop noise coupling into the analog front end.
The MAX1327ECM+ draws approximately 35 mA from AVDD during active conversion at 526 ksps; in shutdown mode (SHDN high) the supply current drops to microamp levels, so designers can power-gate the device in battery-powered or sleep-cycled applications. Add a 2.5V-5V LDO such as the MAX8881 upstream of AVDD to filter digital switching noise from the system 5V rail.
The parallel bus D0-D13 must be length-matched within 5 mm and routed on the digital side of the ground plane; the BUSY, RD, and CS control lines should be kept short to avoid timing skew at the 526 ksps throughput rate. If the parallel bus exceeds 50 mm, add a 74HC245 buffer near the ADC to drive the capacitance of the long trace and avoid double-clock glitches on the data lines.
Do not confuse MAX1327ECM (lead-bearing, no + suffix) with MAX1327ECM+ (lead-free). Verify the + suffix in the part number ordered against the BOM; lead-free parts require SAC305 lead-free reflow profiles while legacy lead-bearing parts require tin-lead reflow. Also avoid leaving the SHDN pin floating - tie it to logic 0 with a 100 kOhm pull-down to ensure the part powers up in active mode rather than high-impedance.
Informações de conformidade
RoHS compliant per Maxim/ADI part ordering convention; the + suffix denotes lead-free matte-tin finish. Halogen-free and REACH compliance declarations available on the manufacturer product page.
