MAX202CSE-T - 5V 120kbps RS-232 Transceiver | Maxim Integrated
N.º da peça: MAX202CSE-T ✓ AtivoMAX202CSE-T Visão geral
An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232-compatible line levels and converts received line signals back into digital logic. The MAX202 belongs to the broader interface IC hierarchy, where transceivers connect processors, industrial equipment, and communications peripherals to physical serial ports. Its integrated charge-pump circuitry supports bipolar RS-232 signaling from a 5 V supply without a separate negative power rail.
Key features include two transmit channels, two receive channels, operation from a single 5 V supply, and data rates up to 120 kbps. The manufacturer specifies 0.1 uF external capacitors, which support the internal charge-pump network and proper signal generation. The 16-pin SOIC package is compact, surface mountable, and compatible with conventional PCB assembly and automated inspection processes.
The MAX202 architecture combines TTL-compatible digital interfaces with EIA/TIA-232 line-driver and receiver stages. Driver channels add the voltage swing and polarity needed at the RS-232 port, while receiver channels reconstruct valid logic states from the bipolar serial waveform. This makes the device suitable for point-to-point serial links in control, test, instrumentation, and embedded systems where a legacy RS-232 interface is required.
Typical applications include industrial control consoles, serial adapters, automated test equipment, POS terminals, and embedded instrumentation. In each case, the two-channel arrangement can support two independent RS-232 ports or provide transmit and receive paths on each side of a bidirectional connection. The MAX202 is also appropriate when modern equipment must preserve compatibility with existing RS-232 peripherals rather than adopting a newer serial interface.
PCB design should preserve the datasheet-recommended capacitor network and route each RS-232 line away from sensitive digital signals. Keep external charge-pump capacitors close to their associated pins, provide a low-impedance ground return, and avoid long unprotected stubs near electrically noisy equipment. Verify the exact pin assignments and transceiver enable behavior against the manufacturer datasheet before finalizing a new layout.
This page consolidates the manufacturer product information, exact package and speed details, source-backed alternatives, and practical implementation guidance for engineers evaluating the MAX202CSE-T as a 5 V RS-232 interface solution.
Alternativas drop-in para MAX202CSE-T — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MAX202CSE-T (mesmo formato e footprint) — diferindo em Maximum Data Rate, Product Type, Supply Voltage, Transceiver Configuration.
MAX202CSE+
✅ Drop-InConsulte o preço
Ver ficha técnica →MAX202IDE4
✅ Drop-InConsulte o preço
Ver ficha técnica →MAX202CSE-T Especificações
| Product Type | RS-232 transceiver |
| Transceiver Configuration | 2/2 transceivers |
| Number of Transmitter Channels | 2 channels |
| Number of Receiver Channels | 2 channels |
| Tensão de alimentação | +5 V |
| Maximum Data Rate | 120 kbps |
| External Capacitor Value | 0.1 uF |
| Encapsulamento | 16-pin SOIC |
| Tipo de montagem | Surface mount |
| Interface Standard | EIA/TIA-232E |
| Output Signal Levels | ±5 V |
| Supply Configuration | Single +5 V supply |
Guia de Configuração de Pinos do MAX202CSE-T 16-pin soic
Configuração de pinos para MAX202CSE-T (pacote 16-pin soic). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para MAX202CSE-T.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MAX202CSE-T é adequado para 6 aplicaçãos: Industrial Control Console, Automated Test Equipment, POS Terminal Interface, Serial Adapter, Embedded Instrumentation, Legacy Communications Gateway.
Industrial Control Console
The MAX202CSE-T fits industrial control equipment that must communicate with legacy RS-232 operators, service terminals, or peripheral controllers. Its two transmitters and two receivers allow two serial channels to be handled by one 16-pin SOIC, while the single 5 V supply simplifies the interface power plan. The MAX202 maintains ±5 V EIA/TIA-232E output levels at data rates up to 120 kbps when the port is loaded as specified. Place the required 0.1 uF capacitors close to their pins and route each RS-232 line away from high-speed digital clocks to reduce coupling into the control system.
Recomendado
Automated Test Equipment
The MAX202CSE-T is useful in automated test equipment that interfaces older RS-232 instruments, fixtures, or motion controllers. Two full-duplex transceiver sections can provide multiple driver and receiver paths without requiring separate RS-232 driver ICs. The 120 kbps maximum data rate suits legacy serial control and status traffic, and the 5 V-only architecture integrates the charge-pump circuitry needed for bipolar line signaling. For bench and production equipment, keep the external 0.1 uF network close to the device and provide a direct ground return between the interface board and connected equipment to minimize common-mode noise.
Recomendado
POS Terminal Interface
The MAX202CSE-T can serve a point-of-sale terminal that needs compatibility with an established RS-232 printer, scanner, scale, or customer-display interface. Two transmitters and two receivers support multiple peripheral connections or a bidirectional data path while keeping the design within a single 5 V supply. The MAX202’s 120 kbps capability is appropriate for conventional serial transaction traffic and legacy control protocols. Design the port for the required EIA/TIA-232E levels, preserve the specified charge-pump capacitors, and confirm grounding with the peripheral because poor signal returns can cause data errors even when the transceiver itself operates correctly.
Recomendado
Serial Adapter
The MAX202CSE-T is a practical choice for a compact RS-232 adapter intended to bridge a modern logic-level controller to a legacy DB9-style port. The integrated two-channel transceiver reduces the number of external interface chips, and the 16-pin SOIC package simplifies assembly on a small adapter PCB. Its single +5 V operation and external 0.1 uF capacitors fit conventional embedded power systems. Keep the RS-232 side electrically isolated from sensitive logic where possible, route the driver outputs away from the receiver inputs, and follow the manufacturer’s connector and grounding recommendations to prevent ground loops.
Recomendado
Embedded Instrumentation
The MAX202CSE-T can provide an RS-232 command port on embedded instrumentation, measurement equipment, and laboratory controllers. The two receive channels are useful for separating a response channel from a status or handshaking channel, while the two driver channels can support independent outbound links. The MAX202 supports operation up to 120 kbps from one 5 V rail, which is well suited to command and response traffic rather than high-speed bulk transfer. Use the manufacturer’s pin and capacitor tables exactly, provide a stable ground reference, and validate signal integrity with the longest cable and peripheral combination expected in service.
Recomendado
Legacy Communications Gateway
The MAX202CSE-T fits a communications gateway that must preserve an RS-232 connection while modern equipment moves to faster or more integrated serial standards. Two complete transceiver paths can bridge controller-to-equipment traffic within one 16-pin SOIC, and the integrated charge pump allows operation from 5 V without an external negative supply. The 120 kbps limit matches many legacy device protocols and management ports. For a reliable gateway, verify that each attached device uses compatible logic levels, maintain the specified 0.1 uF capacitors, use a low-impedance chassis or signal-ground strategy, and add protection appropriate to the exposed cable environment.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MAX202CSE-T — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MAX202CSE+ | MAX202IDE4 |
|---|---|---|---|
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Product Type | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
| Transceiver Configuration | 2/2 | 2/2 | 2/2 |
| Number of Transmitter Channels | 2 channels | 2 channels | 2 channels |
| Number of Receiver Channels | 2 channels | 2 channels | 2 channels |
| Supply Voltage | +5 V | +5 V | +5 V |
| Maximum Data Rate | 120 kbps | 120 kbps | 120 kbps |
| External Capacitor Value | 0.1 uF | 0.1 uF | 0.1 uF |
| Output Signal Levels | ±5 V EIA/TIA-232E | ±5 V EIA/TIA-232E | ±5 V EIA/TIA-232E |
| Order-Code Distinction | CSE-T reel-packaging suffix | CSE+ order code without -T suffix | IDE4 industrial-temperature order code |
Principais diferenciais
- Two complete RS-232 channels in one interface IC (vs MAX202CSE+)
- 120 kbps legacy serial capability (vs MAX202IDE4)
- Single 5 V interface operation (vs MAX202CSE+)
Notas de projeto
Place the manufacturer-specified 0.1 uF charge-pump capacitors directly beside their associated MAX202CSE-T pins, with the shortest practical ground and supply paths. Avoid placing test pads or long traces between the capacitor and IC. Stable charge-pump operation depends on low parasitic inductance and resistance, so tight placement is more useful than simply keeping the components somewhere near the device.
Route the two RS-232 driver outputs as short, isolated traces that do not run beside clocks, switching-node edges, or receiver inputs. Maintain a continuous ground reference beneath the interface area and connect the cable ground with a short return path. Although the transceiver supports 120 kbps data rates, the external cable and connected equipment can degrade performance if long parallel runs or large ground-potential differences are present.
Do not confuse MAX202CSE-T with MAX202CSE+ when preparing a production order. The electrical family ratings are closely matched, but the suffix controls orderable packaging and may also affect procurement configuration. Confirm reel packaging, reel quantity, temperature grade, device markings, and the full manufacturer part number before releasing a BOM or substituting the part in an existing assembly.
Treat each exposed RS-232 cable as a potential EMI entry path. Use the shortest practical driver connection, a low-impedance chassis or signal ground, and an enclosure or board-level protection solution selected for the required surge and ESD environment. Validate receive channels with the longest cable and most aggressive peripheral because logic-level errors at the transceiver input may be amplified by the connected control system.
Informações de conformidade
No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact MAX202CSE-T order code. AEC-Q100 is not applicable to this general-purpose RS-232 transceiver unless a separate automotive-qualified order code is specified.