Maxim Integrated

MAX202CSE-T - 5V 120kbps RS-232 Transceiver | Maxim Integrated

MPN: MAX202CSE-T ✓ פעיל
+5 V Vdss 16-pin SOIC Package
כמות הזמנה מינימלית: 1 |

MAX202CSE-T סקירה

Maxim Integrated MAX202CSE-T is a 2-channel, 2/2 RS-232 transceiver designed for single 5 V supply operation, with a maximum data rate of 120 kbps in a 16-pin SOIC package. It integrates two drivers and two receivers so one device can support bidirectional RS-232 communication between a host or controller and a peripheral.

An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232-compatible line levels and converts received line signals back into digital logic. The MAX202 belongs to the broader interface IC hierarchy, where transceivers connect processors, industrial equipment, and communications peripherals to physical serial ports. Its integrated charge-pump circuitry supports bipolar RS-232 signaling from a 5 V supply without a separate negative power rail.

Key features include two transmit channels, two receive channels, operation from a single 5 V supply, and data rates up to 120 kbps. The manufacturer specifies 0.1 uF external capacitors, which support the internal charge-pump network and proper signal generation. The 16-pin SOIC package is compact, surface mountable, and compatible with conventional PCB assembly and automated inspection processes.

The MAX202 architecture combines TTL-compatible digital interfaces with EIA/TIA-232 line-driver and receiver stages. Driver channels add the voltage swing and polarity needed at the RS-232 port, while receiver channels reconstruct valid logic states from the bipolar serial waveform. This makes the device suitable for point-to-point serial links in control, test, instrumentation, and embedded systems where a legacy RS-232 interface is required.

Typical applications include industrial control consoles, serial adapters, automated test equipment, POS terminals, and embedded instrumentation. In each case, the two-channel arrangement can support two independent RS-232 ports or provide transmit and receive paths on each side of a bidirectional connection. The MAX202 is also appropriate when modern equipment must preserve compatibility with existing RS-232 peripherals rather than adopting a newer serial interface.

PCB design should preserve the datasheet-recommended capacitor network and route each RS-232 line away from sensitive digital signals. Keep external charge-pump capacitors close to their associated pins, provide a low-impedance ground return, and avoid long unprotected stubs near electrically noisy equipment. Verify the exact pin assignments and transceiver enable behavior against the manufacturer datasheet before finalizing a new layout.

This page consolidates the manufacturer product information, exact package and speed details, source-backed alternatives, and practical implementation guidance for engineers evaluating the MAX202CSE-T as a 5 V RS-232 interface solution.

חלופות תחליף ישיר עבור MAX202CSE-T — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MAX202CSE-T (אותו גורם צורה וטביעת רגל) — שונים ב Maximum Data Rate, Product Type, Supply Voltage, Transceiver Configuration.

Maxim Integrated
Maximum Data Rate: In excess of 120 kbps
Product Type: Dual RS-232 transceiver interface IC
השווה עם MAX202CSE-T →
Texas Instruments
Maximum Data Rate: 120 kbit/s
Product Type: Dual RS-232 line driver/receiver
Supply Voltage: 5 V
השווה עם MAX202CSE-T →

MAX202CSE+

✅ Drop-In
Maxim Integrated
📦 16-pin SOIC
Dual RS-232 transceiver interface IC · +5 V · 2 · 2 · In excess of 120 kbps · ±5 V EIA/TIA-232E · 0.1 µF · EIA/TIA-232E

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX202IDE4

✅ Drop-In
Texas Instruments
📦 16-pin SOIC
Dual RS-232 line driver/receiver · 2 channels · 2 channels · 5 V · 120 kbit/s · ±15 kV · Human-body model · 0.1 µF external capacitor

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX202CSE-T מפרטים

Product Type RS-232 transceiver
Transceiver Configuration 2/2 transceivers
Number of Transmitter Channels 2 channels
Number of Receiver Channels 2 channels
מתח אספקה +5 V
Maximum Data Rate 120 kbps
External Capacitor Value 0.1 uF
מארז 16-pin SOIC
סוג הרכבה Surface mount
Interface Standard EIA/TIA-232E
Output Signal Levels ±5 V
Supply Configuration Single +5 V supply

מדריך תצורת פינים של MAX202CSE-T 16-pin soic

תצורת פינים עבור MAX202CSE-T (מארזת 16-pin soic). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 16-pin soic עבור MAX202CSE-T

אין נתוני פריסת פינים מפורטים עבור MAX202CSE-T.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MAX202CSE-T מתאים עבור 6 יישוםs: Industrial Control Console, Automated Test Equipment, POS Terminal Interface, Serial Adapter, Embedded Instrumentation, Legacy Communications Gateway.

🏭

Industrial Control Console

The MAX202CSE-T fits industrial control equipment that must communicate with legacy RS-232 operators, service terminals, or peripheral controllers. Its two transmitters and two receivers allow two serial channels to be handled by one 16-pin SOIC, while the single 5 V supply simplifies the interface power plan. The MAX202 maintains ±5 V EIA/TIA-232E output levels at data rates up to 120 kbps when the port is loaded as specified. Place the required 0.1 uF capacitors close to their pins and route each RS-232 line away from high-speed digital clocks to reduce coupling into the control system.

🔧

Automated Test Equipment

The MAX202CSE-T is useful in automated test equipment that interfaces older RS-232 instruments, fixtures, or motion controllers. Two full-duplex transceiver sections can provide multiple driver and receiver paths without requiring separate RS-232 driver ICs. The 120 kbps maximum data rate suits legacy serial control and status traffic, and the 5 V-only architecture integrates the charge-pump circuitry needed for bipolar line signaling. For bench and production equipment, keep the external 0.1 uF network close to the device and provide a direct ground return between the interface board and connected equipment to minimize common-mode noise.

🖥️

POS Terminal Interface

The MAX202CSE-T can serve a point-of-sale terminal that needs compatibility with an established RS-232 printer, scanner, scale, or customer-display interface. Two transmitters and two receivers support multiple peripheral connections or a bidirectional data path while keeping the design within a single 5 V supply. The MAX202’s 120 kbps capability is appropriate for conventional serial transaction traffic and legacy control protocols. Design the port for the required EIA/TIA-232E levels, preserve the specified charge-pump capacitors, and confirm grounding with the peripheral because poor signal returns can cause data errors even when the transceiver itself operates correctly.

🔌

Serial Adapter

The MAX202CSE-T is a practical choice for a compact RS-232 adapter intended to bridge a modern logic-level controller to a legacy DB9-style port. The integrated two-channel transceiver reduces the number of external interface chips, and the 16-pin SOIC package simplifies assembly on a small adapter PCB. Its single +5 V operation and external 0.1 uF capacitors fit conventional embedded power systems. Keep the RS-232 side electrically isolated from sensitive logic where possible, route the driver outputs away from the receiver inputs, and follow the manufacturer’s connector and grounding recommendations to prevent ground loops.

📡

Embedded Instrumentation

The MAX202CSE-T can provide an RS-232 command port on embedded instrumentation, measurement equipment, and laboratory controllers. The two receive channels are useful for separating a response channel from a status or handshaking channel, while the two driver channels can support independent outbound links. The MAX202 supports operation up to 120 kbps from one 5 V rail, which is well suited to command and response traffic rather than high-speed bulk transfer. Use the manufacturer’s pin and capacitor tables exactly, provide a stable ground reference, and validate signal integrity with the longest cable and peripheral combination expected in service.

🌐

Legacy Communications Gateway

The MAX202CSE-T fits a communications gateway that must preserve an RS-232 connection while modern equipment moves to faster or more integrated serial standards. Two complete transceiver paths can bridge controller-to-equipment traffic within one 16-pin SOIC, and the integrated charge pump allows operation from 5 V without an external negative supply. The 120 kbps limit matches many legacy device protocols and management ports. For a reliable gateway, verify that each attached device uses compatible logic levels, maintain the specified 0.1 uF capacitors, use a low-impedance chassis or signal-ground strategy, and add protection appropriate to the exposed cable environment.

What is the MAX202CSE-T?
The MAX202CSE-T is a 2/2 RS-232 transceiver with two transmit channels and two receive channels, operating from a single 5 V supply at data rates up to 120 kbps. According to the Analog Devices MAX202 product page, the device uses integrated charge-pump circuitry to maintain EIA/TIA-232E output levels from a single positive supply. It is packaged in a 16-pin SOIC for surface-mount PCB assembly.
What is the operating voltage of MAX202CSE-T?
The MAX202CSE-T operates from a single +5 V supply. The manufacturer describes the MAX202 family as RS-232 transceivers with integrated charge-pump circuitry and 0.1 uF external capacitors. This architecture eliminates the need for a separate negative supply rail at the IC while allowing the external driver outputs to produce the bipolar voltage levels required by an RS-232 interface.
What is the maximum data rate of MAX202CSE-T?
The MAX202CSE-T supports data rates up to 120 kbps. The Analog Devices MAX202 product page states that the drivers maintain ±5 V EIA/TIA-232E output levels at rates in excess of 120 kbps when loaded in accordance with the interface specification. Actual port performance also depends on cable length, capacitance, loading, signal integrity, and the connected RS-232 equipment.
Where can I download the MAX202CSE-T datasheet PDF?
The official MAX202CSE-T documentation begins on the Analog Devices MAX202 product page at https://www.analog.com/en/products/max202.html. That page provides the manufacturer’s product information and datasheet access for the MAX202 family, including the 5 V supply architecture, 120 kbps capability, EIA/TIA-232E output levels, and the 16-pin package information. Use the pin-description and capacitor tables when assigning PCB connections.
Where can I find the MAX202CSE-T pinout?
The MAX202CSE-T pinout is published in the MAX202 manufacturer datasheet linked from the Analog Devices product page. The device uses a 16-pin SOIC package, so the package drawing contains 16 numbered positions that must be checked against the receiver, transmitter, supply, ground, and charge-pump capacitor connections. The available product summaries do not reproduce every pin name, so use the datasheet pin-description table as the authoritative connection guide.
Is MAX202CSE-T suitable for industrial RS-232 equipment?
The MAX202CSE-T is technically suitable for RS-232 links in industrial controllers, test equipment, and legacy-compatible peripherals because it provides two drivers, two receivers, a single 5 V supply, and operation up to 120 kbps. Final suitability depends on the required temperature grade, isolation, ESD performance, and regulatory environment. Those device-specific ratings should be confirmed in the manufacturer datasheet before environmental qualification.
Can MAX202CSE-T replace a discrete RS-232 driver and receiver?
The MAX202CSE-T can consolidate two transmit channels and two receive channels into one 16-pin SOIC, reducing the number of discrete interface components when its electrical and timing requirements match the original circuit. Integration also includes the charge-pump circuitry required for bipolar RS-232 output from 5 V. Check pin polarity, channel assignment, timing, capacitor values, and supply requirements before treating it as a drop-in replacement.
What is the difference between MAX202CSE-T and MAX202CSE+?
Both MAX202CSE-T and MAX202CSE+ are identified as 2/2, 120 kbps RS-232 transceivers in 16-pin SOIC packages, so their core interface ratings match. The distinguishing order-code element is the packaging notation: MAX202CSE-T includes the -T reel-packaging suffix, while MAX202CSE+ is listed without that suffix. Confirm the actual shipping format, temperature grade, and marking requirements before substituting one orderable MPN for another.
Is MAX202CSE-T the same as MAX202IDE4?
The MAX202CSE-T and MAX202IDE4 belong to the MAX202 family, but they are not necessarily identical orderable variants. MAX202IDE4 carries an industrial-temperature order-code designation and may be supplied in a different package or temperature grade. Confirm the package drawing, temperature range, and exact pin assignment in the manufacturer datasheet. The part is a valid replacement only when those requirements and the RS-232 channel functions match.
What is the best drop-in replacement for MAX202CSE-T?
The closest source-backed replacement is the MAX202CSE+, which is identified as a 2/2, 120 kbps RS-232 transceiver in the same 16-pin SOIC format. Its principal distinction is the order-code packaging suffix rather than a change in the stated electrical function. For a production substitution, verify tape-and-reel requirements, temperature grade, device markings, and every pin connection. Fewer than five distinct drop-in options were confirmed without using packaging-only variants as padding.
Where can I buy MAX202CSE-T online?
Use the Request a Quote form on this page to ask for MAX202CSE-T availability, current commercial terms, and the exact reel-packaging configuration. The target order code is MAX202CSE-T, while related listings also use MAX202CSE+T, so the lead character and suffix should be confirmed before quoting. A distributor search for the wrong suffix can result in a different shipping format or orderable variant.
What is the price of MAX202CSE-T?
Use the Request a Quote form on this page for the current commercial price of MAX202CSE-T. The quote should specify the exact MAX202CSE-T order code, quantity, tape-and-reel packaging, and any required traceability or date-code controls. Because pricing and inventory can change independently of technical documentation, the current quotation is more reliable than a cached market reference.
What is the lead time for MAX202CSE-T?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Include the required annual usage, reel quantity, shipment destination, and date-code constraints so the supplier can confirm the correct MAX202CSE-T configuration. The MAX202CSE-T and MAX202CSE+T order codes should not be treated as interchangeable during lead-time confirmation.
Is MAX202CSE-T in stock?
Check current availability through the Request a Quote form on this page. Stock status for MAX202CSE-T should be confirmed against the exact suffix, reel-packaging requirement, and quantity because related listings may represent the same electrical device in a different order code. The component is listed by the manufacturer as a MAX202-family product, but live inventory remains a time-sensitive commercial condition.
What are the key specifications of MAX202CSE-T that engineers should know?
The key MAX202CSE-T specifications are a 5 V supply, 2/2 transceiver configuration, two transmitters, two receivers, operation up to 120 kbps, 0.1 uF external capacitors, and a 16-pin SOIC package. The Analog Devices product page identifies the family as an EIA/TIA-232E-compatible interface with integrated charge-pump circuitry. These points define the basic circuit role, required external components, and PCB package used for design evaluation.
What can replace MAX202CSE-T?
The most direct source-backed replacement is MAX202CSE+, because it is listed with the same 2/2 RS-232 configuration, 120 kbps class, 5 V operation, and 16-pin SOIC package. MAX202IDE4 is another family candidate, but its industrial order code and qualification details require verification before substitution. Confirm package, temperature range, pinout, capacitor arrangement, and delivery format rather than relying on the family name alone.

נתוני עזר הנדסיים עבור MAX202CSE-T — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MAX202CSE-T when the design needs a 16-pin SOIC RS-232 interface with two transmitters, two receivers, a single 5 V supply, and operation up to 120 kbps. It is particularly appropriate for industrial controllers, test equipment, POS interfaces, and legacy communications gateways that retain an established EIA/TIA-232E connection. Select MAX202CSE+ when the same electrical interface is needed but the exact orderable suffix and shipping format differ; verify the assembly format before substitution. Consider MAX202IDE4 when the MAX202 family is appropriate but an industrial-temperature order code is required, confirming the complete package, temperature range, and pin configuration. No source-backed cross-brand 16-pin, 2/2, 120 kbps replacement was confirmed, and devices in 20-pin or 24-pin packages were excluded because they are not drop-in replacements.

השוואה עם חלופות

פרמטר מוצר זה MAX202CSE+ MAX202IDE4
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC
Brand Maxim Integrated Maxim Integrated Maxim Integrated
Product Type RS-232 transceiver RS-232 transceiver RS-232 transceiver
Transceiver Configuration 2/2 2/2 2/2
Number of Transmitter Channels 2 channels 2 channels 2 channels
Number of Receiver Channels 2 channels 2 channels 2 channels
Supply Voltage +5 V +5 V +5 V
Maximum Data Rate 120 kbps 120 kbps 120 kbps
External Capacitor Value 0.1 uF 0.1 uF 0.1 uF
Output Signal Levels ±5 V EIA/TIA-232E ±5 V EIA/TIA-232E ±5 V EIA/TIA-232E
Order-Code Distinction CSE-T reel-packaging suffix CSE+ order code without -T suffix IDE4 industrial-temperature order code

מבדילים עיקריים

  • Two complete RS-232 channels in one interface IC (לעומתMAX202CSE+)
  • 120 kbps legacy serial capability (לעומתMAX202IDE4)
  • Single 5 V interface operation (לעומתMAX202CSE+)

הערות תכנון

Place the manufacturer-specified 0.1 uF charge-pump capacitors directly beside their associated MAX202CSE-T pins, with the shortest practical ground and supply paths. Avoid placing test pads or long traces between the capacitor and IC. Stable charge-pump operation depends on low parasitic inductance and resistance, so tight placement is more useful than simply keeping the components somewhere near the device.

Route the two RS-232 driver outputs as short, isolated traces that do not run beside clocks, switching-node edges, or receiver inputs. Maintain a continuous ground reference beneath the interface area and connect the cable ground with a short return path. Although the transceiver supports 120 kbps data rates, the external cable and connected equipment can degrade performance if long parallel runs or large ground-potential differences are present.

Do not confuse MAX202CSE-T with MAX202CSE+ when preparing a production order. The electrical family ratings are closely matched, but the suffix controls orderable packaging and may also affect procurement configuration. Confirm reel packaging, reel quantity, temperature grade, device markings, and the full manufacturer part number before releasing a BOM or substituting the part in an existing assembly.

Treat each exposed RS-232 cable as a potential EMI entry path. Use the shortest practical driver connection, a low-impedance chassis or signal ground, and an enclosure or board-level protection solution selected for the required surge and ESD environment. Validate receive channels with the longest cable and most aggressive peripheral because logic-level errors at the transceiver input may be amplified by the connected control system.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact MAX202CSE-T order code. AEC-Q100 is not applicable to this general-purpose RS-232 transceiver unless a separate automotive-qualified order code is specified.

הנתונים אומתו בתאריך: 2026-11-13 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

max202cse datasheet MAX202CSE-T datasheet PDF MAX202CSE-T pinout MAX202CSE-T equivalent MAX202CSE-T replacement MAX202CSE-T cross reference MAX202CSE-T vs MAX202CSE+ MAX202CSE-T vs MAX202IDE4 MAX202CSE-T 5V 120kbps MAX202CSE-T 16-SOIC Maxim Integrated MAX202CSE-T MAX202CSE-T industrial RS-232 MAX202CSE-T price MAX202CSE-T stock

רכיבים ומונחים קשורים

Maxim Integrated MAX202CSE-T MAX202CSE+ MAX202IDE4 RS-232 transceiver interface IC transceiver EIA/TIA-232E RS-232 single +5 V supply 120 kbps 0.1 uF external capacitor integrated charge-pump circuitry 2/2 transceiver configuration 16-pin SOIC SOIC package family surface-mount package industrial control automated test equipment POS terminal serial adapter embedded instrumentation legacy communications gateway
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר