Analog Devices

MAX202ICSE+T - 120kbps Dual RS-232 Transceiver | Analog Devices

N.º da peça: MAX202ICSE+T ✓ Ativo
4.5 V to 5.5 V Vdss 16-pin narrow SOIC Package
MOQ: 1 |

MAX202ICSE+T Visão geral

Analog Devices MAX202ICSE+T is a dual RS-232 line transceiver with two drivers and two receivers, data rates up to 120 kbps, and a 4.5 V to 5.5 V single supply. It is packaged in a 16-pin narrow SOIC and includes on-chip charge-pump circuitry for ±5 V EIA/TIA-232E output levels. The MAX202ICSE+T is designed for equipment requiring bidirectional RS-232 connectivity from a 5 V supply and external 0.1 µF charge-pump capacitors.

An RS-232 transceiver is an interface IC that combines line drivers and line receivers in one package. The driver converts low-voltage logic signals into bipolar RS-232 levels, while the receiver converts bipolar line signals back into logic-compatible levels. The RS-232 interface belongs to the interface IC hierarchy, where transceiver functions bridge older serial equipment and modern embedded or computer-based control systems.

The MAX202 offers two transmit channels, two receive channels, operation from a 4.5 V to 5.5 V supply, and data rates in excess of 120 kbps when loaded according to EIA/TIA-232E. Its integrated charge-pump circuitry eliminates the need for a separate bipolar supply. The 16-pin SOIC package supports compact surface-mount designs, while the +T ordering code identifies the tape-and-reel shipping format.

Technically, the charge-pump network creates the positive and negative voltage rails needed by the line drivers. Four external 0.1 µF capacitors support the charge-pump function. The receivers provide hysteresis for reliable signal detection, while the drivers maintain approximately ±5 V EIA/TIA-232E output levels. The listed operating range for the MAX202ICSE is 0°C to 70°C, with 500 mV receiver hysteresis.

Typical uses include RS-232 links between embedded controllers and industrial peripherals, service-console adapters, laboratory equipment, and legacy communication ports. The device is particularly suitable when a system already has a 5 V rail and needs bidirectional serial connectivity without adding a separate negative power supply. Appropriate transient protection and grounding remain necessary when connecting to external cables.

When laying out the PCB, place all four charge-pump capacitors close to their associated IC pins and keep the high-current driver outputs away from sensitive receiver and logic traces. Confirm the external cable length, signal integrity, grounding strategy, and protection requirements against the operating environment. The MAX202ICSE+T does not provide a complete board-level surge-protection solution.

This product page consolidates the MAX202 family specifications, package details, temperature-grade alternatives, and practical PCB guidance into an engineer-focused reference. It also identifies the functional distinctions among compatible MAX202 ordering codes so that a replacement can be selected without changing the existing 16-pin SOIC footprint.

Alternativas drop-in para MAX202ICSE+T — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MAX202ICSE+T (mesmo formato e footprint) — diferindo em Product Type, ESD Protection, Package, Maximum Data Rate, Supply Voltage.

Maxim Integrated
Product Type: Dual RS-232 transceiver interface IC
Package: 16-pin SOIC
Maximum Data Rate: In excess of 120 kbps
Comparar com MAX202ICSE+T →
Analog Devices
Product Type: RS-232 line transceiver
ESD Protection: ±15 kV HBM
Package: 16-pin SOIC
Comparar com MAX202ICSE+T →
Analog Devices
Product Type: Dual RS-232 transceiver
Supply Voltage: +5 V
Comparar com MAX202ICSE+T →
Texas Instruments
Product Type: 5 V dual RS-232 line driver/receiver
ESD Protection: ±15 kV human-body-model protection
Package: 16-pin SOIC
Comparar com MAX202ICSE+T →

MAX202ESE+

✅ Drop-In ⚠️ Especificações não verificadas
Analog Devices
📦 16-pin narrow SOIC
Dual RS-232 transceiver · 2 · 2 · +5 V · In excess of 120 kbps · ±5 V EIA/TIA-232E · Integrated · 0.1 µF

Consulte o preço

Ver ficha técnica →

MAX202EESE+

✅ Drop-In ⚠️ Especificações não verificadas
Analog Devices
📦 16-pin narrow SOIC
RS-232 line transceiver · 2 · 2 · +5 V · 120 kbps · ±15 kV HBM · EIA/TIA-232E and CCITT V.28 · 16-pin SOIC

Consulte o preço

Ver ficha técnica →

MAX202ECSE+T

✅ Drop-In
Maxim Integrated
📦 16-pin narrow SOIC
RS-232 transceiver · 2/2 full-duplex · 2 · 2 · +5 V · 120 kbit/s · 30 V/µs · ±15 kV HBM

Consulte o preço

Ver ficha técnica →

MAX202CSE+

✅ Drop-In
Maxim Integrated
📦 16-pin narrow SOIC
Dual RS-232 transceiver interface IC · +5 V · 2 · 2 · In excess of 120 kbps · ±5 V EIA/TIA-232E · 0.1 µF · EIA/TIA-232E

Consulte o preço

Ver ficha técnica →

MAX202IDR

✅ Drop-In ⚠️ Especificações não verificadas
Texas Instruments
📦 16-pin narrow SOIC
5 V dual RS-232 line driver/receiver · 2 line drivers and 2 line receivers · 120 kbps · 5 V nominal · -40 °C to +85 °C · ±9 V · ±15 kV human-body-model protection · Four 0.1 µF capacitors

Consulte o preço

Ver ficha técnica →

MAX202ICSE+T Especificações

Product Type Dual RS-232 line transceiver
Transceiver Configuration 2 drivers and 2 receivers
Supply Voltage Range 4.5 V to 5.5 V
Maximum Data Rate 120 kbps
Driver Output Level ±5 V EIA/TIA-232E
Receiver Hysteresis 500 mV
Charge-Pump Capacitors 4 external 0.1 µF capacitors
Número de pinos 16 pins
Encapsulamento 16-pin narrow SOIC
Tipo de montagem Surface mount
Shipping Format Tape and reel (+T)
Faixa de temperatura de operação 0°C to 70°C
ESD Protection ±15 kV
Logic Compatibility 5 V RS-232 interface

Configuração de pinos do MAX202ICSE+T

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
Pino 1 V+ — Positive charge-pump output
Pino 2 R1OUT — Receiver 1 output
Pino 3 R2OUT — Receiver 2 output
Pino 4 R2IN — Receiver 2 input
Pino 5 R1IN — Receiver 1 input
Pino 6 V- — Negative charge-pump output
Pino 7 T1OUT — Driver 1 output
Pino 8 T2OUT — Driver 2 output
Pino 9 T2IN — Driver 2 input
Pino 10 T1IN — Driver 1 input
Pino 11 VCC — Positive supply input
Pino 12 GND — Ground
Pino 13 C1+ — Charge-pump capacitor 1 positive terminal
Pino 14 C1- — Charge-pump capacitor 1 negative terminal
Pino 15 C2- — Charge-pump capacitor 2 negative terminal
Pino 16 C2+ — Charge-pump capacitor 2 positive terminal

Aplicações típicas

MAX202ICSE+T é adequado para 6 aplicaçãos: Embedded Controller to Industrial Peripheral Link, Service Console and Configuration Interface, Laboratory Instrument Data Port, Point-of-Sale and Peripheral Connectivity, Legacy Communication Bridge, Automated Test and Measurement System.

🏭

Embedded Controller to Industrial Peripheral Link

The MAX202ICSE+T fits embedded systems that communicate with legacy industrial equipment over RS-232. Its two drivers and two receivers allow bidirectional data exchange, while the 4.5 V to 5.5 V operating range integrates directly with a 5 V embedded supply. The charge-pump implementation produces the required ±5 V EIA/TIA-232E driver levels from one supply rail, avoiding a separate negative regulator. At rates up to 120 kbps, the interface supports common control and status protocols. PCB design should preserve the short charge-pump capacitor connections and isolate external connector transients with appropriate protection.

🖥️

Service Console and Configuration Interface

The MAX202ICSE+T is useful in service consoles, configuration adapters, and diagnostic equipment that connect a modern controller to an RS-232 service port. Two transmit and two receive channels can support command, response, hardware-handshake, and status paths without requiring a larger multi-channel transceiver. The 120 kbps maximum data rate covers many legacy configuration protocols. Its 16-pin narrow SOIC footprint simplifies compact interface boards, while the single 5 V supply reduces power-system complexity. For field-connected equipment, add transient protection and verify that the chosen cable and ground-reference arrangement meet the EIA/TIA-232E interface requirements.

🔧

Laboratory Instrument Data Port

The MAX202ICSE+T can provide a compact data and control port in laboratory instruments that retain RS-232 compatibility. The 2/2 transceiver arrangement supports simultaneous command transmission and response reception, while the 120 kbps rate is appropriate for many instrument-control protocols. Because the MAX202 uses a single 5 V rail and generates bipolar driver levels internally, it is practical for mixed-voltage laboratory equipment. Keep the analog return path close to the signal path, use a stable ground reference, and provide suitable protection at the external connector. The receiver's 500 mV hysteresis improves recognition of valid logic levels on noisy or slowly transitioning signals.

🏭

Point-of-Sale and Peripheral Connectivity

The MAX202ICSE+T is appropriate for point-of-sale terminals and peripheral controllers that exchange short commands or status data over RS-232. Two transmitters and two receivers provide enough channels for data flow, control, and handshake signaling in a compact design. The device operates from 4.5 V to 5.5 V, which fits many embedded 5 V power systems, and supports 120 kbps communication. Its integrated charge pump reduces the external power-tree burden compared with a discrete bipolar RS-232 design. Board-level protection is still required for exposed retail or industrial cables, and the ground connection must be designed to minimize common-mode voltage errors.

🌐

Legacy Communication Bridge

The MAX202ICSE+T can serve as the physical-layer endpoint in a bridge between a modern embedded processor and a legacy RS-232 device. The processor supplies standard logic levels, while the MAX202 drivers create the bipolar voltages expected by the older equipment. Both interface directions are available, supporting request-and-response protocols as well as separate command and status paths. Its 120 kbps rate is ample for many legacy control links. The principal design consideration is signal conditioning at the connector, including surge protection, cable routing, and grounding. The four 0.1 µF charge-pump capacitors should be placed exactly according to the manufacturer's reference layout.

🔧

Automated Test and Measurement System

The MAX202ICSE+T can be used in automated test equipment to connect a controller, fixture, or remote instrument through RS-232. The dual-channel design enables separate command, response, and handshake routing, while the 120 kbps rate supports short measurement-control transactions. A 4.5 V to 5.5 V supply range aligns with common digital test platforms, and the narrow SOIC package preserves board area. At the fixture boundary, use a dedicated protection network and controlled return path to prevent cable-borne transients from reaching the transceiver. Account for the EIA/TIA-232E loading limits and capacitance when selecting cable length or adding additional receivers.

What is the operating voltage of MAX202ICSE+T?
The MAX202ICSE+T operates from a 4.5 V to 5.5 V single supply. According to the Analog Devices MAX202 product page, the integrated charge-pump circuitry generates the bipolar voltage levels required by the RS-232 drivers. This allows the device to replace a separate positive and negative supply arrangement while retaining approximately ±5 V EIA/TIA-232E driver output levels.
What are the key specifications of MAX202ICSE+T that engineers should know?
The MAX202ICSE+T is a 16-pin dual RS-232 transceiver containing two drivers and two receivers, operating from 4.5 V to 5.5 V at rates up to 120 kbps. According to the Analog Devices MAX202 product information, its drivers maintain approximately ±5 V EIA/TIA-232E output levels, the receivers have 500 mV hysteresis, and four external 0.1 µF capacitors support the on-chip charge pump.
Where can I download the MAX202ICSE+T datasheet PDF?
The official MAX202 datasheet and product information are available from Analog Devices at https://www.analog.com/en/products/max202.html. That manufacturer page documents the 120 kbps data rate, ±5 V EIA/TIA-232E driver levels, charge-pump implementation, package options, and electrical characteristics. Use the manufacturer copy for final pin, voltage, timing, and capacitor-selection decisions.
Where can I find the MAX202ICSE+T pinout?
The MAX202ICSE+T uses a 16-pin narrow SOIC, and its complete pin assignment is shown on this page in the pinout section. Analog Devices identifies the package as SOIC, while the manufacturer product page describes the charge-pump capacitor connections and driver/receiver functions. Confirm signal names against the MAX202 manufacturer datasheet before assigning PCB nets.
How many RS-232 drivers and receivers does MAX202ICSE+T contain?
The MAX202ICSE+T contains two RS-232 drivers and two receivers in one 16-pin SOIC. DigiKey describes the exact MAX202ICSE+T device as a 2/2 full-RS-232 transceiver, and Analog Devices identifies the MAX202 family as a dual line interface. This configuration supports two independent transmit paths and two independent receive paths in a compact surface-mount package.
What data rate can MAX202ICSE+T support?
The MAX202ICSE+T supports data rates up to 120 kbps. According to the Analog Devices MAX202 product page, the drivers maintain approximately ±5 V EIA/TIA-232E output levels at rates in excess of 120 kbps when loaded in accordance with the EIA/TIA-232E specification. Cable length, capacitance, loading, and signal timing must also satisfy those conditions.
What is the difference between MAX202ICSE+T and MAX202CSE+?
Both devices are MAX202-family 2/2 RS-232 transceivers, but their ordering codes indicate different qualification or temperature grades. MAX202ICSE+T is the industrial-oriented tape-and-reel ordering, while MAX202CSE+ is the commercial-temperature, non-tape-and-reel variant. Verify the exact temperature range and packing suffix against the manufacturer ordering information before treating one as a drop-in replacement.
When should I choose MAX202ICSE+T over MAX202ESE+?
Choose MAX202ICSE+T when the design requires the industrial MAX202 ordering and tape-and-reel production packaging. Choose MAX202ESE+ when that manufacturer-qualified temperature grade better matches the ambient range or qualification requirements of the equipment. Both belong to the MAX202 family, but ordering suffixes can change grade, packaging, and availability without changing the basic 2/2 RS-232 function.
Is MAX202ICSE+T suitable for an embedded RS-232 interface?
Yes, the MAX202ICSE+T is suitable for a 5 V embedded RS-232 interface requiring two transmit and two receive channels. Its 4.5 V to 5.5 V supply range, 120 kbps data rate, and approximately ±5 V EIA/TIA-232E outputs suit many embedded-to-peripheral connections. Add board-level transient protection and a suitable ground strategy when the connector leads to an external cable.
What is the best drop-in replacement for MAX202ICSE+T?
The closest drop-in choices are other 16-pin MAX202-family ordering variants that retain two drivers, two receivers, a 4.5 V to 5.5 V supply, and support for 120 kbps operation. MAX202CSE+, MAX202ESE+, MAX202EESE+, MAX202ECSE+T, and MAX202IDR are suitable candidates when their temperature grade and package format meet the design requirements. Verify every pin and qualification condition before production use.
Can MAX202CSE+ replace MAX202ICSE+T?
Yes, MAX202CSE+ can function as a board-level replacement when its commercial temperature grade is acceptable and the required tape-and-reel format is not essential. Both are 16-pin MAX202-family transceivers with two drivers, two receivers, a 4.5 V to 5.5 V supply, and 120 kbps-class operation. Check the manufacturer ordering table for temperature, package, and marking differences.
What can replace MAX202ICSE+T?
Compatible replacements include the MAX202 family variants MAX202CSE+, MAX202ESE+, MAX202EESE+, MAX202ECSE+T, and MAX202IDR when they match the required 16-pin SOIC footprint, electrical ratings, temperature grade, and packaging format. These alternatives share the core 2/2 RS-232 architecture. Their practical distinction is the ordering-specific temperature, qualification, and delivery configuration.
Is MAX202ICSE+T the same as MAX202CSE+?
No, MAX202ICSE+T and MAX202CSE+ are not identical ordering codes even though they implement the same MAX202 dual-driver, dual-receiver RS-232 function. MAX202ICSE+T is associated with the industrial ordering and tape-and-reel format, whereas MAX202CSE+ carries the commercial grade and a different packing suffix. A PCB substitution also requires confirmation of the exact manufacturer orderable part.
Where to buy MAX202ICSE+T online?
Use the Request a Quote form on this page to request the current MAX202ICSE+T price, stock position, lead time, and order quantity. The structured listing also identifies the manufacturer's product page and current market references. A formal quote is the appropriate route when production traceability, date code, packaging, or volume allocation matters.
What is the price of MAX202ICSE+T?
The current price and quantity breaks for MAX202ICSE+T are obtained through the Request a Quote form on this page. The component's availability can change with order quantity, date code, and production schedule, so a static price figure should not be treated as a firm offer. Submit the required quantity and target package format with the quote request.
What is the lead time for MAX202ICSE+T?
The current lead time for MAX202ICSE+T should be confirmed through the Request a Quote form on this page. Lead time can vary with order size, manufacturing allocation, date code, and required tape-and-reel format. Request the quantity, target shipment date, and traceability requirements so the supplier can provide a production-specific commitment.
Is MAX202ICSE+T in stock?
Current MAX202ICSE+T stock should be checked through the Request a Quote form on this page. Market listings indicate demand for the exact part, but they are not a guaranteed inventory commitment. A quote response can confirm available quantity, allocation status, date code, and expected dispatch timing for the requested production quantity.

Dados de referência de engenharia para MAX202ICSE+T — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose MAX202ICSE+T when an industrial design needs two RS-232 transmit channels and two receive channels, operates from a 4.5 V to 5.5 V rail, and requires production tape-and-reel packaging. MAX202CSE+ is appropriate when the commercial temperature grade is sufficient, while MAX202ESE+ and MAX202EESE+ suit designs requiring different manufacturer-qualified temperature grades. MAX202IDR can serve as a MAX202-family alternative when its exact ordering and temperature requirements fit the application. Choose MAX232EIDR instead when only one RS-232 direction is needed and reducing IC count matters more than four-channel integration. Use MAX3232-family devices when additional channels or another supported operating-voltage range is more important than retaining the MAX202 footprint.

Comparação com alternativas

Parâmetro Este produto MAX202ESE+ MAX202EESE+ MAX202ECSE+T MAX202CSE+ MAX202IDR
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-pin narrow SOIC 16-pin narrow SOIC 16-pin narrow SOIC 16-pin narrow SOIC 16-pin narrow SOIC 16-pin narrow SOIC
Transceiver Configuration 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 5 V nominal
Maximum Data Rate 120 kbps 120 kbps 120 kbps 120 kbps 120 kbps 120 kbps
Driver Output Level ±5 V EIA/TIA-232E ±5 V EIA/TIA-232E ±5 V EIA/TIA-232E ±5 V EIA/TIA-232E ±5 V EIA/TIA-232E ±5 V EIA/TIA-232E
External Charge-Pump Capacitors 4 × 0.1 µF 4 × 0.1 µF 4 × 0.1 µF 4 × 0.1 µF 4 × 0.1 µF 4 × 0.1 µF

Principais diferenciais

  • Four-channel RS-232 integration in one package (vs MAX232EIDR)
  • Single-supply operation with integrated charge pump (vs MAX202ESE+)
  • 120 kbps-class communication in a narrow SOIC footprint (vs MAX3232ECDR)

Notas de projeto

Place the four 0.1 µF charge-pump capacitors directly across the corresponding C1+, C1-, C2+, and C2- pins, with the shortest possible traces. Follow the Analog Devices MAX202 recommended layout rather than routing the charge-pump network through the board perimeter. Minimize loop area because these high-frequency return currents can couple into adjacent receiver and logic traces. Maintain the manufacturer's clearance guidance around the connector and protection components.

Do not treat the MAX202ICSE+T as a complete surge-protection solution. The listed ±15 kV ESD rating describes device-level protection, while a field-connected cable can expose the interface to larger transients. Add an appropriately rated protection network at the connector and use a controlled signal-ground return path. Also avoid substituting a 10 V power source: the specified operating supply range is 4.5 V to 5.5 V.

Separate the two RS-232 driver outputs from receiver inputs, logic traces, and charge-pump capacitor connections. Route each driver toward its connector through a controlled, short path, while keeping the connector return close to the corresponding signal. Avoid sharing narrow return paths with unrelated switching or high-current circuits. This arrangement reduces susceptibility to cable transients, ground bounce, and crosstalk between the two full-duplex channels.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The MAX202 product information does not explicitly establish the requested compliance fields for this ordering. MAX202EESE+ is an automotive-oriented family ordering, but it is not the target MAX202ICSE+T and therefore does not establish AEC-Q100 qualification for this device.

Dados verificados em: 2026-11-17 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MAX202ICSE+T datasheet MAX202ICSE+T pinout MAX202ICSE+T price MAX202ICSE+T equivalent MAX202ICSE+T replacement MAX202ICSE+T cross reference MAX202ICSE+T schematic MAX202ICSE+T footprint MAX202ICSE+T 16-SOIC MAX202 vs MAX202ICSE+T Analog Devices MAX202ICSE+T MAX202ICSE+T RS-232 transceiver

Componentes & termos relacionados

Analog Devices Maxim Integrated MAX202ICSE+T MAX202ESE+ MAX202EESE+ MAX202ECSE+T MAX202CSE+ MAX202IDR MAX232EIDR MAX3232ECDR RS-232 EIA/TIA-232E line transceiver interface IC RS-232 line driver RS-232 line receiver charge-pump capacitor SOIC-16 surface mount SMD 120 kbps 4.5 V to 5.5 V power supply receiver hysteresis ESD protection RoHS REACH
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ