MAX202ICSE+T - 120kbps Dual RS-232 Transceiver | Analog Devices
MPN: MAX202ICSE+T ✓ פעילMAX202ICSE+T סקירה
An RS-232 transceiver is an interface IC that combines line drivers and line receivers in one package. The driver converts low-voltage logic signals into bipolar RS-232 levels, while the receiver converts bipolar line signals back into logic-compatible levels. The RS-232 interface belongs to the interface IC hierarchy, where transceiver functions bridge older serial equipment and modern embedded or computer-based control systems.
The MAX202 offers two transmit channels, two receive channels, operation from a 4.5 V to 5.5 V supply, and data rates in excess of 120 kbps when loaded according to EIA/TIA-232E. Its integrated charge-pump circuitry eliminates the need for a separate bipolar supply. The 16-pin SOIC package supports compact surface-mount designs, while the +T ordering code identifies the tape-and-reel shipping format.
Technically, the charge-pump network creates the positive and negative voltage rails needed by the line drivers. Four external 0.1 µF capacitors support the charge-pump function. The receivers provide hysteresis for reliable signal detection, while the drivers maintain approximately ±5 V EIA/TIA-232E output levels. The listed operating range for the MAX202ICSE is 0°C to 70°C, with 500 mV receiver hysteresis.
Typical uses include RS-232 links between embedded controllers and industrial peripherals, service-console adapters, laboratory equipment, and legacy communication ports. The device is particularly suitable when a system already has a 5 V rail and needs bidirectional serial connectivity without adding a separate negative power supply. Appropriate transient protection and grounding remain necessary when connecting to external cables.
When laying out the PCB, place all four charge-pump capacitors close to their associated IC pins and keep the high-current driver outputs away from sensitive receiver and logic traces. Confirm the external cable length, signal integrity, grounding strategy, and protection requirements against the operating environment. The MAX202ICSE+T does not provide a complete board-level surge-protection solution.
This product page consolidates the MAX202 family specifications, package details, temperature-grade alternatives, and practical PCB guidance into an engineer-focused reference. It also identifies the functional distinctions among compatible MAX202 ordering codes so that a replacement can be selected without changing the existing 16-pin SOIC footprint.
חלופות תחליף ישיר עבור MAX202ICSE+T — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם MAX202ICSE+T (אותו גורם צורה וטביעת רגל) — שונים ב Product Type, ESD Protection, Package, Maximum Data Rate, Supply Voltage.
MAX202ESE+
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←MAX202EESE+
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←MAX202ECSE+T
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←MAX202CSE+
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←MAX202IDR
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←MAX202ICSE+T מפרטים
| Product Type | Dual RS-232 line transceiver |
| Transceiver Configuration | 2 drivers and 2 receivers |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Maximum Data Rate | 120 kbps |
| Driver Output Level | ±5 V EIA/TIA-232E |
| Receiver Hysteresis | 500 mV |
| Charge-Pump Capacitors | 4 external 0.1 µF capacitors |
| מספר פינים | 16 pins |
| מארז | 16-pin narrow SOIC |
| סוג הרכבה | Surface mount |
| Shipping Format | Tape and reel (+T) |
| טווח טמפרטורת פעולה | 0°C to 70°C |
| ESD Protection | ±15 kV |
| Logic Compatibility | 5 V RS-232 interface |
תצורת פינים של MAX202ICSE+T
| פין 1 | V+ — Positive charge-pump output |
| פין 2 | R1OUT — Receiver 1 output |
| פין 3 | R2OUT — Receiver 2 output |
| פין 4 | R2IN — Receiver 2 input |
| פין 5 | R1IN — Receiver 1 input |
| פין 6 | V- — Negative charge-pump output |
| פין 7 | T1OUT — Driver 1 output |
| פין 8 | T2OUT — Driver 2 output |
| פין 9 | T2IN — Driver 2 input |
| פין 10 | T1IN — Driver 1 input |
| פין 11 | VCC — Positive supply input |
| פין 12 | GND — Ground |
| פין 13 | C1+ — Charge-pump capacitor 1 positive terminal |
| פין 14 | C1- — Charge-pump capacitor 1 negative terminal |
| פין 15 | C2- — Charge-pump capacitor 2 negative terminal |
| פין 16 | C2+ — Charge-pump capacitor 2 positive terminal |
יישומים טיפוסיים
MAX202ICSE+T מתאים עבור 6 יישוםs: Embedded Controller to Industrial Peripheral Link, Service Console and Configuration Interface, Laboratory Instrument Data Port, Point-of-Sale and Peripheral Connectivity, Legacy Communication Bridge, Automated Test and Measurement System.
Embedded Controller to Industrial Peripheral Link
The MAX202ICSE+T fits embedded systems that communicate with legacy industrial equipment over RS-232. Its two drivers and two receivers allow bidirectional data exchange, while the 4.5 V to 5.5 V operating range integrates directly with a 5 V embedded supply. The charge-pump implementation produces the required ±5 V EIA/TIA-232E driver levels from one supply rail, avoiding a separate negative regulator. At rates up to 120 kbps, the interface supports common control and status protocols. PCB design should preserve the short charge-pump capacitor connections and isolate external connector transients with appropriate protection.
מומלץ
Service Console and Configuration Interface
The MAX202ICSE+T is useful in service consoles, configuration adapters, and diagnostic equipment that connect a modern controller to an RS-232 service port. Two transmit and two receive channels can support command, response, hardware-handshake, and status paths without requiring a larger multi-channel transceiver. The 120 kbps maximum data rate covers many legacy configuration protocols. Its 16-pin narrow SOIC footprint simplifies compact interface boards, while the single 5 V supply reduces power-system complexity. For field-connected equipment, add transient protection and verify that the chosen cable and ground-reference arrangement meet the EIA/TIA-232E interface requirements.
מומלץ
Laboratory Instrument Data Port
The MAX202ICSE+T can provide a compact data and control port in laboratory instruments that retain RS-232 compatibility. The 2/2 transceiver arrangement supports simultaneous command transmission and response reception, while the 120 kbps rate is appropriate for many instrument-control protocols. Because the MAX202 uses a single 5 V rail and generates bipolar driver levels internally, it is practical for mixed-voltage laboratory equipment. Keep the analog return path close to the signal path, use a stable ground reference, and provide suitable protection at the external connector. The receiver's 500 mV hysteresis improves recognition of valid logic levels on noisy or slowly transitioning signals.
מומלץ
Point-of-Sale and Peripheral Connectivity
The MAX202ICSE+T is appropriate for point-of-sale terminals and peripheral controllers that exchange short commands or status data over RS-232. Two transmitters and two receivers provide enough channels for data flow, control, and handshake signaling in a compact design. The device operates from 4.5 V to 5.5 V, which fits many embedded 5 V power systems, and supports 120 kbps communication. Its integrated charge pump reduces the external power-tree burden compared with a discrete bipolar RS-232 design. Board-level protection is still required for exposed retail or industrial cables, and the ground connection must be designed to minimize common-mode voltage errors.
מומלץ
Legacy Communication Bridge
The MAX202ICSE+T can serve as the physical-layer endpoint in a bridge between a modern embedded processor and a legacy RS-232 device. The processor supplies standard logic levels, while the MAX202 drivers create the bipolar voltages expected by the older equipment. Both interface directions are available, supporting request-and-response protocols as well as separate command and status paths. Its 120 kbps rate is ample for many legacy control links. The principal design consideration is signal conditioning at the connector, including surge protection, cable routing, and grounding. The four 0.1 µF charge-pump capacitors should be placed exactly according to the manufacturer's reference layout.
מומלץ
Automated Test and Measurement System
The MAX202ICSE+T can be used in automated test equipment to connect a controller, fixture, or remote instrument through RS-232. The dual-channel design enables separate command, response, and handshake routing, while the 120 kbps rate supports short measurement-control transactions. A 4.5 V to 5.5 V supply range aligns with common digital test platforms, and the narrow SOIC package preserves board area. At the fixture boundary, use a dedicated protection network and controlled return path to prevent cable-borne transients from reaching the transceiver. Account for the EIA/TIA-232E loading limits and capacitance when selecting cable length or adding additional receivers.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MAX202ICSE+T — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MAX202ESE+ | MAX202EESE+ | MAX202ECSE+T | MAX202CSE+ | MAX202IDR |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC |
| Transceiver Configuration | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 5 V nominal |
| Maximum Data Rate | 120 kbps | 120 kbps | 120 kbps | 120 kbps | 120 kbps | 120 kbps |
| Driver Output Level | ±5 V EIA/TIA-232E | ±5 V EIA/TIA-232E | ±5 V EIA/TIA-232E | ±5 V EIA/TIA-232E | ±5 V EIA/TIA-232E | ±5 V EIA/TIA-232E |
| External Charge-Pump Capacitors | 4 × 0.1 µF | 4 × 0.1 µF | 4 × 0.1 µF | 4 × 0.1 µF | 4 × 0.1 µF | 4 × 0.1 µF |
מבדילים עיקריים
- Four-channel RS-232 integration in one package (לעומתMAX232EIDR)
- Single-supply operation with integrated charge pump (לעומתMAX202ESE+)
- 120 kbps-class communication in a narrow SOIC footprint (לעומתMAX3232ECDR)
הערות תכנון
Place the four 0.1 µF charge-pump capacitors directly across the corresponding C1+, C1-, C2+, and C2- pins, with the shortest possible traces. Follow the Analog Devices MAX202 recommended layout rather than routing the charge-pump network through the board perimeter. Minimize loop area because these high-frequency return currents can couple into adjacent receiver and logic traces. Maintain the manufacturer's clearance guidance around the connector and protection components.
Do not treat the MAX202ICSE+T as a complete surge-protection solution. The listed ±15 kV ESD rating describes device-level protection, while a field-connected cable can expose the interface to larger transients. Add an appropriately rated protection network at the connector and use a controlled signal-ground return path. Also avoid substituting a 10 V power source: the specified operating supply range is 4.5 V to 5.5 V.
Separate the two RS-232 driver outputs from receiver inputs, logic traces, and charge-pump capacitor connections. Route each driver toward its connector through a controlled, short path, while keeping the connector return close to the corresponding signal. Avoid sharing narrow return paths with unrelated switching or high-current circuits. This arrangement reduces susceptibility to cable transients, ground bounce, and crosstalk between the two full-duplex channels.
מידע על תאימות
The MAX202 product information does not explicitly establish the requested compliance fields for this ordering. MAX202EESE+ is an automotive-oriented family ordering, but it is not the target MAX202ICSE+T and therefore does not establish AEC-Q100 qualification for this device.