Analog Devices

MAX310MJE - 8:1 CMOS RF/Video Multiplexer | Analog Devices

N.º da peça: MAX310MJE ✓ Ativo
250 ohms maximum Rds(on) 16-pin CDIP Package
MOQ: 1 |

MAX310MJE Visão geral

Analog Devices MAX310MJE is an 8:1 CMOS RF/video multiplexer in a 16-pin CDIP through-hole package. It supports one multiplexed signal channel, operates as an unbuffered analog switch, and has a maximum on-state resistance of 250 ohms. The device is specified for military-temperature operation and uses a 0.300-inch, 7.62 mm pin pitch.

An RF/video multiplexer is an analog switch that connects one common signal path to any one of several signal inputs. It belongs to the analog switch hierarchy, which includes multiplexers and demultiplexers, and ultimately falls under interface ICs and semiconductor signal-routing devices. The MAX310MJE consolidates eight selectable sources onto one output, reducing the number of discrete switches and associated routing logic required in video, test, instrumentation, and communications equipment.

Key characteristics include an 8:1 configuration, CMOS construction, 16-CDIP mechanical format, through-hole mounting, and maximum on-state resistance of 250 ohms. Its military temperature grade makes it relevant to ruggedized equipment, although the exact operating-temperature limits should be confirmed against the manufacturer datasheet before a production release. The unbuffered architecture places important emphasis on external source and load impedance, signal amplitude, switching time, and off-state isolation.

The MAX310MJE uses independent selection and enable controls to route one of eight channels to the common terminal. Because the switch is unbuffered, it does not provide gain, isolation, impedance buffering, or level translation. Designers should therefore evaluate source impedance, receiver capacitance, settling time, insertion loss, off leakage, and crosstalk together. A practical video path benefits from short traces, a stable ground reference, and termination arranged to minimize reflections.

Typical uses include RF and video test systems, instrumentation signal routing, communication equipment, broadcast video interfaces, and defense or aerospace electronics. The part can also support channel-selection architectures where a controller chooses among several inputs and a common amplifier or measurement channel processes the selected signal. Its through-hole CDIP package favors systems that favor through-hole assembly, rugged handling, or prototyping over compact surface-mount layouts.

The principal design consideration is signal integrity. Keep input and common-path traces short, use a continuous ground plane, and place the multiplexer near the source of unwanted impedance. Avoid long unterminated traces that can amplify reflections and degrade settling behavior. Review break-before-make requirements in the control timing before switching adjacent channels, especially where the upstream circuit must remain undisturbed during transition.

This product overview combines the MAX310MJE configuration, package, resistance, temperature-grade information, and application guidance with pin-compatible alternatives and practical routing considerations. It supports faster sourcing and design decisions while keeping electrical verification anchored in the manufacturer datasheet.

Alternativas drop-in para MAX310MJE — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MAX310MJE (mesmo formato e footprint) — diferindo em Product Type.

Maxim Integrated
Product Type: 8-channel CMOS RF/video multiplexer
Comparar com MAX310MJE →

MAX310MJE/883B

✅ Drop-In
📦 16-pin CDIP
Same 8:1 unbuffered RF/video multiplexer and 16-CDIP package; screening and ordering-code attributes differ by 0% in the listed functional and package ratings.

📋 Alternativa de referência (fora do catálogo)

MAX310CPE+

✅ Drop-In
Maxim Integrated
📦 16-pin CDIP
8-channel CMOS RF/video multiplexer · 8 channels · CMOS · 16-pin PDIP · Through-hole · 16-PDIP · MAX310 · MAX310CPE+

Consulte o preço

Ver ficha técnica →

5962-9455601MEA

✅ Drop-In
📦 16-pin CDIP
Same 8:1 CDIP multiplexer class; 5962 qualification and unspecified electrical differences separate it from the MAX310MJE, producing an estimated 70% parameter match.

📋 Alternativa de referência (fora do catálogo)

MAX310MJE Especificações

Product Type 8:1 CMOS RF/video multiplexer
Multiplexer Configuration Single 8:1
Number of Signal Channels 1 channel
Technology CMOS
Architecture Unbuffered analog multiplexer
On-State Resistance 250 ohms maximum
Package Type 16-pin CDIP
Package Code CDIP
Tipo de montagem Through-hole
Pin Pitch 0.300 inch (7.62 mm)
Number of Terminals 16
Temperature Grade Military
Surface Mount No

Guia de Configuração de Pinos do MAX310MJE cdip

Configuração de pinos para MAX310MJE (pacote cdip). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote cdip para MAX310MJE

Nenhum dado detalhado de pinagem disponível para MAX310MJE.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MAX310MJE é adequado para 6 aplicaçãos: RF Test-System Signal Routing, Video Channel Selection, Communication Equipment Routing, Aerospace Signal-Selection Systems, Instrumentation Signal Multiplexing, Broadcast Video Patch Systems.

🏭

RF Test-System Signal Routing

The MAX310MJE fits an eight-source RF test multiplexer because it provides a single 8:1 common-output path in a 16-pin CDIP package with maximum on-state resistance of 250 ohms. It can route one of eight test inputs into a common receiver, attenuator, or measurement channel without requiring eight separate external switches. The military temperature grade is also relevant to rugged test equipment. Because the device is unbuffered, source impedance, receiver capacitance, insertion loss, and settling time must be checked in the manufacturer datasheet. Keep the common path short and provide a low-impedance ground reference to limit RF coupling and reflections.

📺

Video Channel Selection

The MAX310MJE is suitable for selecting one of eight video sources onto a common video path. Its 8:1 CMOS topology reduces the routing complexity of multi-camera, multi-source, or laboratory video equipment, while the 250-ohm maximum on-state resistance provides a defined basis for impedance matching. Since the multiplexer is unbuffered, video amplitude, source impedance, cable capacitance, and receiver loading remain important. Route the common output as a short, continuously referenced trace and confirm allowable input swing and settling requirements in the Analog Devices datasheet.

🌐

Communication Equipment Routing

The MAX310MJE can serve as a compact eight-way RF or video routing element within communication equipment that must connect several controlled sources to one processing chain. Its single 8:1 configuration supports source selection without duplicating downstream amplifiers or converters. The 16-CDIP through-hole package is advantageous for ruggedized or laboratory communication hardware where through-hole assembly and serviceability are priorities. Designers should verify operating frequency, channel isolation, off-state rejection, control timing, and supply voltage in the MAX310 datasheet before establishing signal-integrity margins.

✈️

Aerospace Signal-Selection Systems

The MAX310MJE's military temperature grade and 8:1 RF/video multiplexing function make it a candidate for aerospace and defense signal-selection assemblies where one channel must be routed to a common receiver or processor. The 16-pin CDIP package supports through-hole assembly in ruggedized equipment. Qualification requirements still govern the final choice, so MAX310MJE/883B or 5962-9455601MEA may be preferable when screened procurement is required. Review radiation, environmental, reliability, and continuous-operating-life requirements separately from the device's commercial electrical ratings.

🔧

Instrumentation Signal Multiplexing

The MAX310MJE allows eight measurement or stimulus sources to share one analog processing path in a laboratory instrument. The common output can feed an amplifier, converter, or acquisition channel while selection logic chooses the active source. Its maximum on-state resistance of 250 ohms makes source and load impedance particularly important, and unbuffered operation does not provide gain or isolation. Use short traces, a stable ground plane, and intentional termination, then verify input capacitance, leakage, switching speed, and crosstalk in the manufacturer datasheet.

📡

Broadcast Video Patch Systems

The MAX310MJE can route one of eight video inputs into a common broadcast or monitoring path, reducing the number of mechanical or discrete switching elements in a patch system. Its 8:1 CMOS architecture and military-grade designation suit professional equipment requiring controlled source selection. The 16-CDIP package is through-hole mounted with a 7.62 mm pitch, supporting rugged assembly. Because the switch is unbuffered, long cable runs and high-capacitance receivers should be checked for settling and reflection problems, with the common trace kept as short as practical.

Resumo dos produtos recomendados

MAX310MJE/883B Screened same-package RF multiplexer alternative Usado em: RF Test-System Signal Routing, Video Channel Selection, Communication Equipment Routing, Aerospace Signal-Selection Systems, Instrumentation Signal Multiplexing, Broadcast Video Patch Systems 5962-9455601MEA 5962-qualified CDIP comparison candidate Usado em: RF Test-System Signal Routing, Communication Equipment Routing, Aerospace Signal-Selection Systems MAX310CPE+ Maxim Integrated Usado em: Video Channel Selection, Instrumentation Signal Multiplexing, Broadcast Video Patch Systems
Where can I buy MAX310MJE online?
The MAX310MJE can be requested through the Request a Quote form on this page. The form is the appropriate route for current commercial terms, stock confirmation, minimum-order quantity, and delivery scheduling. The device is a 16-pin CDIP military-grade 8:1 CMOS RF/video multiplexer, so its lead time may reflect the package, qualification grade, and production volume rather than the maturity of the underlying MAX310 design.
What is the price of MAX310MJE?
Use the Request a Quote form on this page for the current price and quantity terms for the MAX310MJE. Pricing is calculated for the requested quantity and can change with market conditions, packaging requirements, and production volume. The part is identified as an 8:1 CMOS RF/video multiplexer in a 16-CDIP package with military temperature grade and a maximum on-state resistance of 250 ohms.
What is the lead time for MAX310MJE?
Request the current lead time through the Request a Quote form on this page. The required quantity and delivery schedule determine the production plan, particularly for a 16-pin military-grade CDIP device. The manufacturer lists the MAX310 family as production, but current manufacturing availability and allocation should be confirmed before committing the date-sensitive portion of a project schedule.
Is MAX310MJE in stock?
The Request a Quote form on this page is the place to request current stock confirmation for the MAX310MJE. Because the part is a military-grade 16-CDIP member of the MAX310 family, stock can vary with order quantity and production planning. The manufacturer product page identifies the MAX310 as production, but that lifecycle statement does not by itself confirm an immediate allocation for every quantity.
What are the key specifications of MAX310MJE that engineers should know?
The MAX310MJE is a single 8:1 CMOS RF/video multiplexer in a 16-pin CDIP package. According to the Analog Devices MAX310 manufacturer datasheet, its maximum on-state resistance is 250 ohms, it uses through-hole mounting, and it has a 0.300-inch pin pitch. Distributor and manufacturer listings identify the device as military-temperature grade. Exact supply voltage, switching timing, leakage, channel isolation, and operating-temperature limits require confirmation from the datasheet.
What is the operating voltage of MAX310MJE?
The MAX310MJE operating-voltage range must be confirmed in the Analog Devices MAX310 manufacturer datasheet before it is used in a new circuit. The confirmed device characteristics include an 8:1 CMOS configuration, 16-CDIP package, 250-ohm maximum on-state resistance, and military temperature grade. Do not infer the supply limits from the 8:1 channel count because the control and analog signal ratings are separate electrical parameters.
Where to download the MAX310MJE datasheet PDF?
The official MAX310 product page at Analog Devices provides access to the MAX310 data sheet and supporting documentation. Use the MAX310MJE ordering information and pin-description information to confirm the exact military-grade variant. The device is a 16-CDIP 8:1 CMOS RF/video multiplexer with a maximum on-state resistance of 250 ohms. The all-datasheet result in the results list also provides an accessible mirror, but the manufacturer document should remain the controlling technical reference.
Where can I find the MAX310MJE pinout?
The MAX310MJE pin configuration is identified in the pin-description table of the Analog Devices MAX310 manufacturer datasheet. The package is a 16-pin CDIP with a 0.300-inch, 7.62 mm pitch and standard through-hole orientation. Use that table to assign common, channel inputs, selection controls, enable controls, supply, and ground before laying out the PCB; do not infer individual pin functions solely from the 8:1 product description.
MAX310MJE vs MAX310MJE/883B - which is better for military equipment?
MAX310MJE/883B is the screened 5962-style designation associated with the MAX310MJE/883B offering, while MAX310MJE is the standard military-grade part identified in the MAX310 family. Both are described as 8:1 unbuffered RF/video multiplexers in 16-pin CDIP packages. Choose MAX310MJE/883B when its specific screening, traceability, and procurement documentation match the system requirement; otherwise, compare the manufacturer datasheets and ordering codes directly.
What is the difference between MAX310MJE and MAX310CPE+?
The MAX310CPE+ and MAX310MJE are related MAX310-family multiplexers, but their suffix codes identify different ordering and qualification arrangements. The cross-reference material describes their functional characteristics as consistent while noting differences in some electrical characteristics. Both are associated with an 8:1 CMOS RF/video multiplexer and a 16-pin CDIP format, so verify the exact MAX310CPE+ datasheet before treating it as a drop-in replacement.
When should I choose MAX310MJE over MAX310MJE/883B?
Choose MAX310MJE when the standard MAX310 military-grade ordering configuration satisfies the environmental, screening, and procurement requirements of the design. Choose MAX310MJE/883B when the project requires its specific 5962-style documentation or screening attributes. Both parts use a 16-pin CDIP package and implement an 8:1 unbuffered RF/video multiplexing function, so the decision depends primarily on qualification and ordering-code requirements rather than basic routing topology.
Is MAX310MJE suitable for RF signal routing?
The MAX310MJE is suitable for RF routing when the application remains within the device's verified frequency, resistance, isolation, capacitance, and supply limits. It is an unbuffered 8:1 CMOS RF/video multiplexer with a maximum on-state resistance of 250 ohms. Because no switching-time or frequency-response values are established in the product listing, verify those limits and calculate insertion loss and settling behavior in the manufacturer datasheet.
What can replace MAX310MJE?
MAX310MJE/883B is the closest listed replacement candidate because it preserves the 8:1 unbuffered RF/video multiplexer function and 16-pin CDIP package. The related MAX310CPE+ and 5962-9455601MEA also appear in comparison material, but each requires confirmation of pin assignment, electrical ratings, temperature grade, qualification, and lifecycle status. Use the Request a Quote form for sourcing support with the exact selected MPN.
What is the best 5962 equivalent for MAX310MJE?
The 5962-9455601MEA is the directly identified 5962-family comparison candidate for the MAX310MJE. Comparison information associates it with an 8:1 CDIP multiplexer and describes the functional characteristics as broadly consistent, while noting some electrical differences. It should be treated as a candidate rather than an unconditional substitute until pin compatibility, on-state resistance, control logic, supply range, switching speed, and qualification requirements are verified.
How should MAX310MJE be used in a video multiplexer circuit?
Use the MAX310MJE as an 8:1 unbuffered analog routing element, connect the selected source to the common path, and control the selection and enable inputs from the system logic. Keep source, common, and ground traces short because the 250-ohm maximum on-state resistance can interact with capacitance, source impedance, and receiver loading. Confirm break-before-make timing, allowable signal swing, and settling requirements against the manufacturer datasheet.

Dados de referência de engenharia para MAX310MJE — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the MAX310MJE when the design needs an 8:1 unbuffered CMOS RF/video multiplexer in a 16-pin CDIP package and the standard military-grade ordering configuration meets the project's procurement requirements. Select MAX310MJE/883B when the system requires the more specific 5962-style screening and documentation. Consider MAX310CPE+ only after reviewing its electrical differences and exact pin behavior against the MAX310 datasheet. Evaluate 5962-9455601MEA when a 5962-qualified CDIP candidate is needed, but verify on-resistance, switching speed, control polarity, supply range, and channel isolation because those values are not established by the comparison listing. For all candidates, test the complete source impedance, receiver loading, signal amplitude, bandwidth, settling, and crosstalk conditions rather than relying only on the shared 8:1 and CDIP attributes.

Comparação com alternativas

Parâmetro Este produto MAX310MJE/883B MAX310CPE+ 5962-9455601MEA
Package 16-pin CDIP 16-pin CDIP 16-pin CDIP 16-pin CDIP
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Multiplexer Configuration Single 8:1 8:1 unbuffered 8:1 8:1
Mounting Type Through-hole Through-hole Through-hole Through-hole

Principais diferenciais

  • Closest screened ordering option (vs MAX310MJE/883B)
  • Military-grade standard ordering configuration (vs MAX310CPE+)
  • Defined maximum on-state resistance (vs 5962-9455601MEA)

Notas de projeto

Treat the common path as a transmission line rather than an ideal wire. The 250-ohm maximum on-state resistance interacts with source impedance, receiver capacitance, and trace inductance, especially at higher RF frequencies. Keep the selected input, common terminal, and ground return physically short, provide a continuous ground reference, and use the manufacturer's recommended termination arrangement. Validate channel settling with the actual source and load because an unbuffered switch does not restore signal integrity.

Use the 16-pin CDIP footprint with a 0.300-inch, 7.62 mm pitch and verify pin-one orientation against the MAX310 manufacturer datasheet before drilling. Maintain adequate clearance around the package for the external control logic and analog routing. Place decoupling close to the device's supply and ground pins in the pattern recommended by the datasheet, and avoid routing unrelated digital clocks beneath the analog common path to reduce coupled noise.

Do not treat the MAX310MJE as a gain or isolation buffer. Its unbuffered architecture can load the source, interact with downstream capacitance, and expose the signal to crosstalk and switching transients. Confirm control logic polarity, break-before-make behavior, maximum signal swing, supply limits, and allowed switching rates in the datasheet. For adjacent-channel systems, hold the inactive channel in a defined state to prevent unintended signal contention.

Minimize radiated and conducted coupling by keeping the RF or video common path away from switching-power nodes and high-current returns. Use a solid ground plane, short ground connections, and a defined return path beneath the analog route where the board stack-up permits. If the selected signal has wide bandwidth, check adjacent-channel isolation and off-state rejection with realistic terminations; long cable or harness interfaces can dominate crosstalk even when the IC itself performs within its ratings.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The MAX310MJE is identified as military-temperature grade and has a 5962-style alternative, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement appears in the product information. AEC-Q100 is not applicable to this legacy analog multiplexer based on the stated military qualification.

Buscas relacionadas

MAX310MJE datasheet MAX310MJE pinout MAX310MJE datasheet pdf MAX310MJE equivalent MAX310MJE replacement MAX310MJE cross reference MAX310MJE vs MAX310MJE/883B MAX310MJE vs MAX310CPE+ MAX310MJE 8:1 RF multiplexer MAX310MJE 16-CDIP package MAX310MJE military grade multiplexer Analog Devices MAX310MJE MAX310MJE price MAX310MJE stock where to buy MAX310MJE

Componentes & termos relacionados

Analog Devices MAX310MJE MAX310MJE/883B MAX310CPE+ 5962-9455601MEA MAX310 RF multiplexer video multiplexer analog switch unbuffered multiplexer 8:1 multiplexer CMOS analog interface IC semiconductor 16-pin CDIP CDIP package family through-hole package surface-mount technology on-state resistance channel isolation break-before-make military temperature grade 5962 RF test equipment video routing
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ