Texas Instruments

MAX3221CDBRG4 - 250kbps RS-232 Transceiver | Texas Instruments

N.º da peça: MAX3221CDBRG4 ✓ Ativo
3 V to 5.5 V Vdss 1 µA Id 16-pin SSOP, 0.209 inch (5.30 mm) width Package
MOQ: 1 |

MAX3221CDBRG4 Visão geral

Texas Instruments MAX3221CDBRG4 is a single-channel RS-232 line driver and receiver with a 3 V to 5.5 V supply, 250 kbit/s operation, and ±15 kV ESD protection, housed in a 16-pin SSOP package. The transceiver integrates one driver, one receiver with a dedicated enable input, and a dual charge-pump circuit for generating the bipolar voltage levels required by RS-232.

An RS-232 transceiver is an interface IC that translates logic-level signals between a host or controller and a RS-232 link. Within the signal-chain hierarchy, it belongs to the RS-232 interface, line-driver and receiver, communications-interface, and semiconductor categories. The MAX3221CDBRG4 is intended for equipment that needs one bidirectional serial port while operating from a 3 V to 5.5 V system supply.

Key features include a maximum data rate of 250 kbit/s, ±15 kV ESD protection on the serial-port connection pins, and a low shutdown supply current. According to the manufacturer datasheet, the device provides AutoShutdown operation and supports true +3 V to +5.5 V supplies. Its integrated charge pumps reduce the external component count compared with a discrete RS-232 interface implementation.

The MAX3221 family combines a driver and receiver with internal level-shifting circuitry. The charge-pump section develops positive and negative voltage rails from the single device supply, allowing the line interface to produce RS-232-compatible output levels. The receiver converts the bipolar serial signal back to a logic-compatible signal, while the dedicated receiver-enable control can place the receiving path in a reduced-power state when it is not required.

Typical uses include industrial serial-port adapters, point-to-sale equipment, test and measurement instruments, embedded control systems, and legacy peripheral connections. The single-channel arrangement is especially suitable for compact systems that need one RS-232 port but no multi-port RS-232 expansion.

When designing around the MAX3221CDBRG4, preserve the charge-pump capacitor and bypass-capacitor placement recommended in the manufacturer datasheet. Confirm that the host interface uses the correct logic voltage and that the receiver-enable polarity matches the controller firmware. The 16-pin SSOP footprint also requires careful solder-joint inspection because lead pitch and package density can complicate rework.

This product page consolidates the electrical limits, interface function, packaging information, and practical design considerations for the MAX3221CDBRG4. It also identifies verified drop-in alternatives and organizes the selection trade-offs by speed, supply range, temperature grade, and interface configuration.

Alternativas drop-in para MAX3221CDBRG4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MAX3221CDBRG4 (mesmo formato e footprint) — diferindo em AutoShutdown Supply Current, ESD Protection, Interface Standard, Package, Product Type.

Analog Devices
AutoShutdown Supply Current: 1 uA
ESD Protection: Enhanced ESD protection
Interface Standard: EIA/TIA-232
Comparar com MAX3221CDBRG4 →

MAX3221CDBR

✅ Drop-In
Texas Instruments
📦 16-pin SSOP
Single-channel RS-232 line driver/receiver transceiver · 3 V to 5.5 V · 250 kbps · 1 · 1 · Full duplex · ±15 kV · Dual charge-pump circuit

Consulte o preço

Ver ficha técnica →

MAX3221EIDBR

✅ Drop-In
Texas Instruments
📦 16-pin SSOP
RS-232 line driver and receiver transceiver · 1 · 1 · 250kbps · 3V to 5.5V · TIA/EIA-232-F · IEC 61000-4-2 · ±15kV

Consulte o preço

Ver ficha técnica →

MAX3221EAE+

✅ Drop-In
Analog Devices
📦 16-pin SSOP
RS-232 transceiver · 3 V to 5.5 V · 120 kbps · 1 · 1 · 1 uA · 16-SSOP · 5.30 mm

Consulte o preço

Ver ficha técnica →

MAX3221CDBRG4 Especificações

Product Type Single-channel RS-232 line driver/receiver
Number of Drivers 1 driver
Number of Receivers 1 receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbit/s
ESD Protection ±15 kV
Encapsulamento 16-pin SSOP, 0.209 inch (5.30 mm) width
Tipo de montagem Surface mount
Operating Supply Range 3 V to 5.5 V
AutoShutdown Supply Current 1 µA
Driver and Receiver Count 1/1
Interface Standard RS-232
ESD Test Model Human-Body Model (HBM)
Compliance Standard TIA/EIA-232-F and ITU V.28
Packaging Tape and reel

Guia de Configuração de Pinos do MAX3221CDBRG4 16-pin ssop, 0.209 inch (5.30 mm) width

Configuração de pinos para MAX3221CDBRG4 (pacote 16-pin ssop, 0.209 inch (5.30 mm) width). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 16-pin ssop, 0.209 inch (5.30 mm) width para MAX3221CDBRG4

Nenhum dado detalhado de pinagem disponível para MAX3221CDBRG4.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MAX3221CDBRG4 é adequado para 6 aplicaçãos: Industrial Serial-Port Adapter, Point-of-Sale Terminal Interface, Test and Measurement Equipment, Embedded Controller Service Port, Legacy Peripheral Connectivity, Portable Diagnostic Interface.

🏭

Industrial Serial-Port Adapter

The MAX3221CDBRG4 fits a compact industrial RS-232 adapter because it combines one driver and one receiver in a single 16-pin SSOP package. Its 3 V to 5.5 V supply range supports embedded 3.3 V and 5 V control hardware, while the 250 kbit/s maximum data rate covers standard asynchronous serial links. The ±15 kV ESD rating on the connection pins adds useful protection for a cable interface exposed to electrostatic discharge. A designer should still evaluate the exact temperature grade and use appropriately routed protection for severe industrial environments.

💳

Point-of-Sale Terminal Interface

A point-of-sale terminal can use the MAX3221CDBRG4 when it needs one legacy serial connection to a peripheral, printer, or service interface. The device operates from 3 V to 5.5 V, which allows it to share power with common embedded terminal logic, and its single-channel architecture preserves board area. Operation at up to 250 kbit/s is suitable for conventional RS-232 traffic. Place the charge-pump capacitors and bypass capacitor close to their pins, and route the cable-side interface away from sensitive processor circuitry.

🖥️

Test and Measurement Equipment

The MAX3221CDBRG4 is appropriate for test and measurement equipment that retains an RS-232 control or configuration port. A 250 kbit/s interface rate is sufficient for many command and status exchanges, while the dedicated receiver-enable pin can reduce activity when the receiver is not needed. Its 16-pin SSOP package allows the interface to fit beside a controller without occupying a board edge as much as a larger package. Verify the enclosure ground and cable-return strategy because an RS-232 transceiver alone does not eliminate ground-loop or surge concerns.

🧩

Embedded Controller Service Port

The MAX3221CDBRG4 can provide a service port for an embedded controller that needs configuration access over RS-232. The 3 V to 5.5 V supply range supports common controller rails, and the 1 µA shutdown supply current described for the MAX3221 family helps with low-power operation when the port is inactive. The receiver-enable control offers another way to manage the receive path. Firmware should control that pin carefully so that line states are interpreted predictably during startup and shutdown.

🔧

Legacy Peripheral Connectivity

The MAX3221CDBRG4 enables a modern controller to communicate with a legacy peripheral that exposes only an RS-232 port. The integrated dual charge-pump circuit generates the required bipolar voltage levels from one 3 V to 5.5 V supply, avoiding a separate negative-rail generator. The device supports signaling rates up to 250 kbit/s and includes ±15 kV ESD protection on the serial connection pins. Confirm the peripheral's logic timing, connector wiring, and handshake requirements before finalizing the interface.

📱

Portable Diagnostic Interface

The MAX3221CDBRG4 can support a portable diagnostic or programming adapter when one RS-232 channel is sufficient. Its 1 µA shutdown current is useful where the adapter may remain connected to a battery-powered system for extended periods, while the compact 16-pin SSOP package supports space-constrained assemblies. The 3 V to 5.5 V input range accommodates common portable-system rails, and the 250 kbit/s limit is adequate for many configuration protocols. A robust mechanical connector and cable strain relief remain important in portable equipment.

Resumo dos produtos recomendados

MAX3221 Parent RS-232 transceiver family Usado em: Industrial Serial-Port Adapter, Point-of-Sale Terminal Interface, Test and Measurement Equipment, Embedded Controller Service Port, Legacy Peripheral Connectivity, Portable Diagnostic Interface
What is the MAX3221CDBRG4?
The MAX3221CDBRG4 is a Texas Instruments single-channel RS-232 transceiver operating from a 3 V to 5.5 V supply at up to 250 kbit/s. It integrates one line driver, one receiver, a dual charge-pump circuit, and ±15 kV ESD protection in a 16-pin SSOP package. According to the manufacturer product page, the device also provides a dedicated receiver-enable input for controlling the receive path.
What is the operating voltage of MAX3221CDBRG4?
The MAX3221CDBRG4 operates from a 3 V to 5.5 V supply. This range allows it to interface with both 3.3 V and 5 V host logic while the internal charge pumps generate the positive and negative voltages required by an RS-232 connection. According to the Texas Instruments MAX3221 product page, the device supports the complete 3 V to 5.5 V operating supply range.
What is the maximum data rate of MAX3221CDBRG4?
The MAX3221CDBRG4 supports data rates up to 250 kbit/s. That bandwidth is suitable for conventional RS-232 links used by industrial controllers, test equipment, point-of-sale terminals, and legacy peripherals. According to the manufacturer product information, the MAX3221 is a 250 kbit/s single-channel line driver and receiver.
Does MAX3221CDBRG4 include ESD protection?
Yes, the MAX3221CDBRG4 provides ±15 kV ESD protection on the RS-232 connection pins. According to the manufacturer datasheet information, the protection is specified using the Human-Body Model and the interface meets or exceeds TIA/EIA-232-F and ITU V.28 requirements. External board-level protection may still be appropriate for exposed cables or severe industrial environments.
Where can I download the MAX3221CDBRG4 datasheet PDF?
The official MAX3221 documentation is available from the Texas Instruments product page at https://www.ti.com/product/MAX3221, where the manufacturer provides the MAX3221 datasheet and supporting technical information. The device documentation also covers electrical characteristics, charge-pump capacitor requirements, pin functions, and typical operating circuits for the MAX3221 family.
Where can I find the MAX3221CDBRG4 pinout?
The MAX3221CDBRG4 pinout is presented in the pin-description table and package drawing in the official Texas Instruments MAX3221 datasheet. Use that table when assigning the 16 SSOP pins because it identifies the supply, ground, charge-pump, driver, receiver, and enable functions. The manufacturer documentation is preferable to copying a diagram from an unverified pinout page.
Where can I buy MAX3221CDBRG4 and request a quote?
Use the Request a Quote form on this page to request MAX3221CDBRG4 pricing, availability, and lead time from XAIPART. The form allows the request to include the exact MAX3221CDBRG4 ordering code and desired quantity. Current order status should be confirmed through that form because distributor inventory and lead time can change.
What is the lead time for MAX3221CDBRG4?
The current MAX3221CDBRG4 lead time should be requested through the Request a Quote form on this page. The form records the exact ordering code and quantity so XAIPART can check current channel availability and manufacturing allocation. Do not base production scheduling on historical inventory records, because component lead times can vary with demand.
Is MAX3221CDBRG4 in stock?
Current MAX3221CDBRG4 stock status is not published on this page as a static quantity. Submit a Request a Quote inquiry for the exact ordering code and required quantity to obtain current availability from XAIPART. This approach avoids presenting a temporary distributor inventory count as a guaranteed production allocation.
What can replace MAX3221CDBRG4?
The closest verified replacements include MAX3221CDBR, MAX3221EIDBR, and MAX3221EAE+, each presented in the same SSOP footprint and described as RS-232 line-driver/receiver alternatives. The correct choice depends on temperature grade, suffix, and exact operating limits. Confirm the complete pin description and electrical tables in the manufacturer datasheet before replacing an existing design.
Is MAX3221CDBRG4 the same as MAX3221CDBR?
The MAX3221CDBRG4 and MAX3221CDBR belong to the same MAX3221 family and are compared as RS-232 interface alternatives, but their ordering suffixes should not be assumed interchangeable without checking the ordering table. Review the temperature grade, lead finish, packing code, and marking requirements in the manufacturer documentation. The G4 ordering designation identifies the requested exact configuration.
MAX3221CDBRG4 vs MAX3221EIDBR — which should I choose?
Choose the MAX3221CDBRG4 when its exact manufacturer ordering configuration satisfies the required temperature and environmental conditions. Choose MAX3221EIDBR when its documented operating grade better matches the deployment and all pin and electrical requirements are confirmed. The EIDBR comparison identifies temperature-related differences, so the application environment should be the deciding factor rather than package compatibility alone.
When should I choose MAX3221CDBRG4 over another RS-232 transceiver?
Choose MAX3221CDBRG4 when the design requires one RS-232 channel, a 3 V to 5.5 V host supply, operation up to 250 kbit/s, and ±15 kV ESD protection in a 16-pin SSOP package. A multi-channel transceiver is more appropriate when several ports must share one board, while a different electrical or temperature grade may be needed for an extended-temperature requirement.
Is MAX3221CDBRG4 suitable for an industrial serial adapter?
The MAX3221CDBRG4 is suitable for many industrial serial adapters because it supports a 3 V to 5.5 V supply, 250 kbit/s operation, and ±15 kV ESD protection on the connection pins. Its single-channel topology reduces board area where only one RS-232 port is required. Verify the exact temperature grade and add appropriate cable-side protection for the installation environment.
What are the key specifications of MAX3221CDBRG4 that engineers should know?
The essential MAX3221CDBRG4 specifications are a 3 V to 5.5 V supply range, 250 kbit/s maximum signaling rate, one driver and one receiver, ±15 kV ESD protection, and a 16-pin SSOP package. According to the Texas Instruments product page, it also incorporates a dual charge-pump circuit and a dedicated receiver-enable input. These parameters determine its suitability for compact RS-232 links.
What is the best Texas Instruments equivalent for MAX3221CDBRG4?
The best Texas Instruments equivalent is the member of the MAX3221 single-channel family whose ordering code exactly preserves the required package, temperature grade, electrical limits, and production configuration. MAX3221CDBR, MAX3221EIDBR, and MAX3221EAE+ are documented alternatives, but their suffix-specific requirements must be checked. A same-family name alone does not guarantee qualification for every deployment.

Dados de referência de engenharia para MAX3221CDBRG4 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose MAX3221CDBRG4 when the design needs one RS-232 port, a 3 V to 5.5 V system supply, operation at up to 250 kbit/s, and ±15 kV ESD protection in a 16-pin SSOP package. Choose MAX3221CDBR when its documented ordering configuration satisfies the production and environmental requirements without the G4 suffix. Consider MAX3221EIDBR when its temperature-grade configuration better matches an extended-temperature deployment, and MAX3221EAE+ after verifying its exact suffix-specific limits. Multi-channel alternatives are more appropriate when one board must support multiple RS-232 ports. In every case, verify the manufacturer pin-description table, charge-pump capacitor values, operating temperature, and ordering-code requirements before substituting the part.

Comparação com alternativas

Parâmetro Este produto MAX3221CDBR MAX3221EIDBR MAX3221EAE+
Package 16-pin SSOP 16-pin SSOP 16-pin SSOP 16-pin SSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Transceiver Type Single-channel RS-232 driver/receiver Single-channel RS-232 driver/receiver Single-channel RS-232 driver/receiver Single-channel RS-232 driver/receiver
Driver/Receiver Count 1/1 1/1 1/1 1/1
Ordering Suffix CDBRG4 CDBR EIDBR EAE+

Principais diferenciais

  • Single-channel integration in a compact package (vs MAX3221EIDBR)
  • 3 V to 5.5 V operation (vs MAX3221CDBR)
  • Integrated ESD protection on serial connections (vs MAX3221EAE+)

Notas de projeto

Place the charge-pump capacitors, supply bypass capacitor, and input/output network components exactly as shown in the typical applications circuit in the Texas Instruments MAX3221 datasheet. Keep the charge-pump traces short and avoid routing them beneath noisy digital or switching-current paths. The 16-pin SSOP footprint should be checked against the manufacturer land pattern before PCB release, including lead pitch, toe geometry, and exposed-pad assumptions if any.

Connect the RS-232 connector directly to the driver, receiver, and protected serial pins while keeping the high-voltage charge-pump section separated from sensitive analog or high-impedance nodes. Maintain a clear return path from the connector ground to the circuit ground and use the shortest practical route between the transceiver and connector protection components. This reduces capacitive coupling from cable transients and improves ESD-current survivability.

Do not assume that all MAX3221 ordering suffixes are automatically interchangeable in every production program. Confirm the exact temperature grade, package, lead configuration, device marking, and ESD rating in the manufacturer ordering information before releasing a replacement. Also ensure firmware interprets the receiver-enable polarity correctly; otherwise the software may read an invalid line state during startup or shutdown.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer datasheet states that the RS-232 interface meets or exceeds TIA/EIA-232-F and ITU V.28 requirements. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not confirmed for the exact MAX3221CDBRG4 ordering code.

Buscas relacionadas

MAX3221CDBRG4 datasheet MAX3221CDBRG4 pinout MAX3221CDBRG4 datasheet pdf MAX3221CDBRG4 equivalent MAX3221CDBRG4 replacement MAX3221CDBRG4 price MAX3221CDBRG4 stock Texas Instruments MAX3221CDBRG4 MAX3221CDBRG4 250kbps RS-232 MAX3221CDBRG4 16-SSOP pinout MAX3221CDBRG4 industrial serial adapter MAX3221CDBRG4 vs MAX3221EIDBR

Componentes & termos relacionados

Texas Instruments MAX3221CDBRG4 MAX3221CDBR MAX3221EIDBR MAX3221EAE+ MAX3221 RS-232 transceiver RS-232 line driver RS-232 line receiver serial interface IC interface IC semiconductor AutoShutdown charge-pump circuit ESD protection TIA/EIA-232-F ITU V.28 RoHS REACH 16-pin SSOP SSOP package family surface-mount package 250 kbit/s 3 V to 5.5 V supply industrial serial-port adapter
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ