Texas Instruments

MAX3221MDBREP - 250kbps RS-232 Transceiver | Texas Instruments

N.º da peça: MAX3221MDBREP ✓ Ativo
3 V to 5.5 V Vdss 16-pin SSOP (DB) Package
MOQ: 1 |

MAX3221MDBREP Visão geral

The Texas Instruments MAX3221MDBREP is a single-channel RS-232 line driver and receiver with a 3 V to 5.5 V supply, operation up to 250 kbps, and ±15 kV ESD protection. It is packaged in a 16-pin SSOP and includes one driver, one receiver, and a dual charge-pump circuit.

An RS-232 transceiver is an interface IC that translates between TTL/CMOS logic levels and RS-232 voltage levels. The MAX3221 belongs to the RS-232 transceiver hierarchy, where it connects digital controllers or data terminals to external serial equipment. Its charge-pump circuit develops the positive and negative voltages required by RS-232 without a separate external DC supply.

The 3 V to 5.5 V operating range permits use in both 3.3 V and 5 V systems. The MAX3221MDBREP supports 250 kbps operation, accepts 5 V logic input with a 3.3 V supply, and provides bus-pin ESD protection exceeding ±15 kV using the human body model. Automatic power-down disables the driver when the interface is inactive to reduce power consumption.

Internally, the device combines one RS-232 line driver, one line receiver, and dual charge pumps with external flying capacitors. This architecture provides a compact solution for isolated or non-isolated point-to-point serial links. The SSOP-16 package is suitable for industrial and embedded equipment where one RS-232 channel is required and board area must remain modest.

Typical uses include serial-port adapters, diagnostic interfaces, industrial-control equipment, battery-powered instruments, and legacy peripheral connections. Placing the transceiver near the DB9 or equivalent connector helps limit exposure of the high-voltage RS-232 pins and improves protection against electrostatic discharge and externally coupled noise.

Design the external charge-pump capacitors and supply bypass capacitor according to the manufacturer datasheet. Confirm the connector-side ground, logic ground strategy, cable length, and data rate before releasing the layout. Do not expose TTL-side signals to RS-232 voltage levels or substitute the charge-pump capacitors with arbitrary ceramic values.

This product page consolidates the exact electrical ratings, package information, replacement analysis, interface use cases, and practical layout guidance for engineers evaluating the MAX3221MDBREP in a compact RS-232 design.

Alternativas drop-in para MAX3221MDBREP — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MAX3221MDBREP (mesmo formato e footprint) — diferindo em Package, Supply Voltage Range, Number of Drivers, Number of Receivers, Product Type.

Analog Devices
Package: 16-pin SSOP
Supply Voltage Range: +3 V to +5.5 V
Number of Drivers: 1 driver
Comparar com MAX3221MDBREP →
Analog Devices
Package: 16-SSOP
Product Type: RS-232 transceiver
Comparar com MAX3221MDBREP →
Texas Instruments
Package: 16-SSOP
Comparar com MAX3221MDBREP →

MAX3221CAE+

✅ Drop-In
Analog Devices
📦 16-SSOP
RS-232 transceiver · 1 transmitter and 1 receiver · +3 V to +5.5 V · 1 µA · 16-pin SSOP · Surface mount · 1 driver · 1 receiver

Consulte o preço

Ver ficha técnica →

MAX3221MDBREP.A

✅ Drop-In
📦 16-SSOP
Enhanced-product ordering variant with the same 3 V to 5.5 V, 250 kbps, and 16-pin SSOP function; enhanced manufacturing and change-notification support.

📋 Alternativa de referência (fora do catálogo)

MAX3221EAE+

✅ Drop-In
Analog Devices
📦 16-SSOP
RS-232 transceiver · 3 V to 5.5 V · 120 kbps · 1 · 1 · 1 uA · 16-SSOP · 5.30 mm

Consulte o preço

Ver ficha técnica →

MAX3221ECPW

✅ Drop-In
📦 16-SSOP
Same 1-driver, 1-receiver RS-232 function in 16-pin SSOP packaging; lifecycle comparison identifies the ECPW ordering option as obsolete.

📋 Alternativa de referência (fora do catálogo)

MAX3221EEUE+T

✅ Drop-In
📦 16-SSOP
Same MAX3221 single-channel RS-232 family and 16-pin SSOP format; enhanced temperature ordering suffix and lead-free termination code differ from the target suffix.

📋 Alternativa de referência (fora do catálogo)

MAX3221MDBREP Especificações

Product Type Single-channel RS-232 line driver/receiver transceiver
Number of Drivers 1
Number of Receivers 1
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
RS-232 Bus-Pin ESD Protection ±15 kV using the human body model
Charge-Pump Configuration Dual charge-pump circuit
Logic Input Compatibility Accepts 5 V logic input with a 3.3 V supply
Automatic Power-Down Automatically disables the driver for power savings
Protocol RS-232
Interface Standard Compliance TIA/EIA-232-F and ITU V.28
Encapsulamento 16-pin SSOP (DB)
Package Width 5.30 mm
Lead Pitch 0.025 inch
Packaging Cut Tape
Faixa de temperatura de operação -55 °C to 125 °C
Status RoHS Compliant
Manufacturer Texas Instruments

Guia de Configuração de Pinos do MAX3221MDBREP 5.30 mm

Configuração de pinos para MAX3221MDBREP (pacote 5.30 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 5.30 mm para MAX3221MDBREP

Nenhum dado detalhado de pinagem disponível para MAX3221MDBREP.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MAX3221MDBREP é adequado para 6 aplicaçãos: Industrial Serial-Port Adapter, Battery-Powered Diagnostic Instrument, Legacy Peripheral Connectivity, Point-of-Sale Terminal Interface, Telecommunications Equipment Console, Data Acquisition and Test Module.

🏭

Industrial Serial-Port Adapter

The MAX3221MDBREP fits an industrial serial-port adapter that must bridge 3.3 V or 5 V digital logic to a single RS-232 channel. Its 3 V to 5.5 V supply range and ability to accept 5 V logic input with a 3.3 V supply simplify interface design across different controller platforms. The device operates up to 250 kbps, making it appropriate for configuration links, service consoles, and legacy equipment. Its ±15 kV HBM bus-pin protection adds useful protection at the exposed connector interface, while the 16-pin SSOP package keeps the converter compact. Place the device close to the connector and route the RS-232 side away from sensitive logic to minimize ESD exposure and coupling.

🔋

Battery-Powered Diagnostic Instrument

The MAX3221MDBREP is suitable for a battery-powered diagnostic instrument that uses a short RS-232 connection for configuration, logging, or service data. Automatic power-down disables the driver when the interface is inactive, reducing system power demand without requiring the host to manage the transceiver continuously. The 3 V to 5.5 V operating range accommodates common single-cell and regulated system rails. One transmitter and one receiver are sufficient for point-to-point service communication at rates up to 250 kbps. Because the RS-232 pins can carry substantially higher voltages than the logic side, maintain clear separation between connector and logic routing and use a protective ground strategy appropriate for the enclosure.

🔧

Legacy Peripheral Connectivity

The MAX3221MDBREP provides a practical interface for connecting a modern controller to one legacy RS-232 peripheral. The single-driver, single-receiver arrangement supports bidirectional serial communication over one channel without adding multiple interface devices. Operation up to 250 kbps supports legacy data links that do not require modern multi-gigabit serial performance, while the ±15 kV HBM rating helps protect the external bus pins from electrostatic discharge. The dual charge-pump architecture supplies the bipolar RS-232 levels from a single 3 V to 5.5 V rail. Validate the peripheral's logic polarity, handshake behavior, cable length, and connector pinout before production use, because RS-232 implementations can differ at the application level.

🖥️

Point-of-Sale Terminal Interface

The MAX3221MDBREP can support a point-of-sale terminal or peripheral interface that uses one RS-232 channel for receipt printers, scales, or service equipment. The 250 kbps maximum data rate exceeds the throughput normally required for short transactional messages, while the 16-pin SSOP package limits board-space consumption. A 3.3 V or 5 V system rail can power the transceiver within its 3 V to 5.5 V input range. Automatic power-down reduces current use when the channel is inactive, which is useful in continuously operating retail equipment. Position the transceiver near the external connector, provide the required charge-pump capacitors, and keep the high-voltage RS-232 nets isolated from display and payment-security circuitry.

🌐

Telecommunications Equipment Console

The MAX3221MDBREP is appropriate for a telecommunications equipment console that requires a local RS-232 service port. The extended -55 °C to 125 °C operating range supports equipment intended for varied environmental conditions, and the single-channel architecture matches a point-to-point management connection. Operation from 3 V to 5.5 V permits integration with embedded processors and field-programmable logic operating at either 3.3 V or 5 V. The ±15 kV HBM bus-pin protection assists with electrostatic events encountered during field installation and maintenance. Designers should still use a shielded enclosure, a defined chassis and logic-ground strategy, and short connector-side traces. Verify the console's baud rate remains within the 250 kbps operating limit.

📺

Data Acquisition and Test Module

The MAX3221MDBREP fits a compact data-acquisition or test module that needs to export measurements or accept setup commands through a legacy RS-232 port. The device's one-driver, one-receiver configuration is sufficient for command-and-response links, and its 250 kbps rate supports many laboratory and production-test protocols. The 3 V to 5.5 V supply range integrates with mixed-voltage test electronics, while automatic power-down limits consumption during idle periods. The 16-pin SSOP package supports space-constrained instrumentation. Place the transceiver near the DB9 or equivalent connector to keep the bipolar RS-232 routing short, maintain separation from analog measurement inputs, and follow the manufacturer values for the external charge-pump and bypass capacitors.

Resumo dos produtos recomendados

MAX3221MDBREP Texas Instruments Usado em: Industrial Serial-Port Adapter, Battery-Powered Diagnostic Instrument, Legacy Peripheral Connectivity, Point-of-Sale Terminal Interface, Telecommunications Equipment Console, Data Acquisition and Test Module MAX3221CAE Pin-compatible MAX3221-family option Usado em: Industrial Serial-Port Adapter, Telecommunications Equipment Console MAX3221EAE Same-family RS-232 interface alternative Usado em: Legacy Peripheral Connectivity MAX3221MDBREP.A Enhanced-product MAX3221-family option Usado em: Point-of-Sale Terminal Interface MAX3221EEUE+T Enhanced-temperature MAX3221-family option Usado em: Data Acquisition and Test Module
What are the key specifications of MAX3221MDBREP that engineers should know?
The MAX3221MDBREP is a 16-pin SSOP RS-232 transceiver with one driver, one receiver, a 3 V to 5.5 V supply range, and operation up to 250 kbps. According to the Texas Instruments MAX3221-EP product page and manufacturer datasheet, it also provides bus-pin ESD protection exceeding ±15 kV using the human body model. Its dual charge-pump architecture generates the bipolar voltages required by the RS-232 interface, while automatic power-down disables the driver when the link is inactive.
What is the operating voltage of MAX3221MDBREP?
The MAX3221MDBREP operates from 3 V to 5.5 V. According to the Texas Instruments manufacturer datasheet, the device accepts 5 V logic input when its supply is 3.3 V, allowing the interface to bridge a 5 V RS-232 line and a lower-voltage digital system. The supply pins still require correct decoupling, and the external charge-pump capacitors must follow the values and layout guidance specified by the manufacturer.
Where can I download the MAX3221MDBREP datasheet PDF?
The official MAX3221-EP product page links directly to the MAX3221MDBREP datasheet and supporting documentation. The indexed manufacturer description identifies the device as a 3 V to 5.5 V, 250 kbps RS-232 line driver/receiver with ±15 kV ESD protection in a 16-pin SSOP package. Use the Texas Instruments product page for the current controlled PDF and any associated application information.
Where can I find the MAX3221MDBREP pinout?
The MAX3221MDBREP pinout is shown in the pin-configuration section of the Texas Instruments MAX3221-EP manufacturer datasheet. The device uses a 16-pin SSOP package, with separate logic-side and connector-side pins plus external charge-pump capacitor connections. Assign PCB tracks from that diagram because the connector-side pins carry bipolar RS-232 voltages and must not be routed alongside sensitive logic signals.
What is the best drop-in replacement for MAX3221MDBREP?
MAX3221CAE is the closest documented drop-in replacement because the MAX3221CAE comparison reports identical primary performance parameters. It retains the same single-driver, single-receiver RS-232 architecture and the same 16-pin SSOP footprint. Confirm the exact pin configuration, temperature grade, lifecycle status, and ordering suffix before production release. MAX3221MDBREP.A is the enhanced-product option, while MAX3221ECPW requires particular attention because its lifecycle listing is marked obsolete.
Can MAX3221CAE replace MAX3221MDBREP?
Yes, MAX3221CAE is a candidate drop-in replacement for MAX3221MDBREP. The manufacturer-aligned comparison identifies identical primary technical performance and both devices use the 16-pin SSOP format. Because a footprint match alone does not prove a production substitute, verify enable behavior, temperature grade, ESD rating, supply limits, and lifecycle status against the current manufacturer datasheets before approving the change.
What can replace MAX3221MDBREP in a pin-compatible design?
MAX3221CAE, MAX3221EAE, MAX3221ECPW, MAX3221EEUE+T, and MAX3221MDBREP.A are the documented same-family candidates associated with the MAX3221MDBREP. They use the 16-pin SSOP format and provide the same basic 1-driver, 1-receiver RS-232 function. Selection should be based on confirmed pin compatibility, temperature range, supply behavior, lifecycle status, and exact ordering suffix rather than family name alone.
Is MAX3221MDBREP the same as MAX3221EAE?
MAX3221EAE and MAX3221MDBREP share the core MAX3221 function: a single RS-232 transmitter and receiver with a 3 V to 5.5 V supply and 16-pin SSOP packaging. Their documented performance profiles are closely aligned, but ordering suffix, temperature grade, lifecycle state, and qualification details can differ. Compare the pin description and operating tables for the exact variants being considered.
When should I choose MAX3221MDBREP over MAX3221CAE?
Choose MAX3221MDBREP when the enhanced-product MAX3221-EP ordering path, controlled manufacturing, and specified -55 °C to 125 °C operating range are required. Choose MAX3221CAE when its documented parameters and lifecycle position fit the design and the supply plan benefits from its availability. Both can serve the same basic RS-232 function, so procurement continuity and exact qualification requirements should determine the final choice.
Is MAX3221MDBREP suitable for industrial serial-port equipment?
The MAX3221MDBREP is suitable for industrial serial-port equipment when the design remains within its 3 V to 5.5 V supply range and 250 kbps data-rate limit. Its extended -55 °C to 125 °C temperature capability and ±15 kV HBM bus-pin protection support harsh operating environments. Industrial suitability also depends on correct grounding, enclosure design, connector selection, surge protection strategy, and the final system validation.
How much ESD protection does MAX3221MDBREP provide?
The MAX3221MDBREP provides RS-232 bus-pin ESD protection exceeding ±15 kV using the human body model. According to the Texas Instruments manufacturer datasheet, this protection applies to the serial-port connection pins, including ground. The rating does not eliminate the need for a sound enclosure, short connector traces, protective grounding, and system-level surge controls; it primarily protects the interface during electrostatic-discharge events.
Where can I buy MAX3221MDBREP online?
Use the Request a Quote form on this page to request MAX3221MDBREP pricing, stock confirmation, order quantities, and current lead time. The part is identified as a Texas Instruments 16-pin SSOP RS-232 transceiver. Quote requests should include the exact MPN MAX3221MDBREP, required quantity, target delivery date, and whether cut-tape or another permitted delivery format is needed.
What is the price of MAX3221MDBREP?
Submit a MAX3221MDBREP request through the Request a Quote form on this page for the current commercial terms. The structured price evidence does not contain an explicit quantity-break table for the exact ordering suffix, so no unit figure is stated here. Include the required order quantity and delivery destination so the quote can reflect the correct package format and supply conditions.
What is the lead time and stock status for MAX3221MDBREP?
Current stock, minimum order quantity, and lead time for MAX3221MDBREP should be confirmed through the Request a Quote form on this page. The part is an active Texas Instruments MAX3221-EP orderable variant in a 16-pin SSOP package with cut-tape packaging identified in the product information. Supply conditions can change with quantity and date, so confirm allocation before committing a production schedule.
What is the best MAX3221-family equivalent for MAX3221MDBREP?
MAX3221CAE is the strongest documented direct equivalent because its comparison with MAX3221MDBREP reports identical primary technical performance and the same 16-pin SSOP format. MAX3221MDBREP.A is an enhanced-product alternative rather than a different function, and MAX3221EAE is another closely aligned family member. Validate the exact suffix, pin configuration, lifecycle status, and operating-temperature requirements before designating a replacement.

Dados de referência de engenharia para MAX3221MDBREP — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose MAX3221MDBREP for a new single-channel RS-232 design that requires a 3 V to 5.5 V supply, operation up to 250 kbps, ±15 kV HBM bus-pin protection, and an extended -55 °C to 125 °C temperature range. MAX3221CAE is the strongest direct functional substitute because its documented primary parameters match, but its lifecycle and qualification details should be checked for the exact production program. MAX3221MDBREP.A provides enhanced-product manufacturing and change-notification support within the same 16-pin SSOP footprint. MAX3221EAE is another close family option for 3 V to 5.5 V systems. MAX3221ECPW shares the interface format but is identified as obsolete, making it unsuitable for new long-lived programs without an explicit risk assessment. MAX3221EEUE+T is relevant when its enhanced-temperature ordering suffix matches the environmental requirement. In every case, verify the exact pin configuration, package dimensions, temperature grade, ESD rating, and lifecycle status before releasing a substitute into production.

Comparação com alternativas

Parâmetro Este produto MAX3221CAE MAX3221MDBREP.A MAX3221EAE MAX3221ECPW MAX3221EEUE+T
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-SSOP 16-SSOP - same 16-SSOP - same 16-SSOP - same 16-SSOP - same 16-SSOP - same
Driver/Receiver Count 1 driver, 1 receiver 1 driver, 1 receiver 1 driver, 1 receiver 1 transmitter, 1 receiver 1 driver, 1 receiver 1 driver, 1 receiver
ESD Protection ±15 kV HBM on RS-232 bus pins ±15 kV HBM ±15 kV HBM ±15 kV HBM ±15 kV HBM ±15 kV HBM

Principais diferenciais

  • Closest documented performance-equivalent replacement (vs MAX3221CAE)
  • Enhanced-product manufacturing option (vs MAX3221MDBREP.A)
  • Direct MAX3221 family function in the same footprint (vs MAX3221EAE)
  • Clear lifecycle trade-off (vs MAX3221ECPW)

Notas de projeto

Place the MAX3221MDBREP close to the DB9 or equivalent connector so the RS-232 driver and receiver pins have short, direct routes. Keep the connector-side nets away from sensitive analog, clock, and high-speed digital traces. Route the external charge-pump capacitors close to their designated IC pins, use the recommended ground connection, and avoid routing connector-side nets beneath the transceiver or unrelated sensitive circuitry.

Do not treat the ±15 kV HBM bus-pin rating as complete lightning, surge, or cable-fault protection. Determine whether the installation requires external surge arrestors, longer ESD paths, or isolated power. Also verify connector pin assignments and logic polarity before energizing the board, because RS-232 signal names and handshake implementations are not standardized across every peripheral.

Use a supply that remains within the MAX3221MDBREP operating range of 3 V to 5.5 V, and provide the manufacturer-recommended bypass and charge-pump capacitors. The device accepts 5 V logic input with a 3.3 V supply, but this input tolerance does not permit the supply itself to exceed 5.5 V. Check capacitor voltage ratings, DC bias characteristics, and placement because the charge-pump network depends on low-impedance connections for stable operation.

Establish the grounding strategy before routing the board. RS-232 interfaces commonly use a signal reference and protective ground that may not be identical to the logic ground, and poor grounding can undermine noise immunity. Avoid long connector-side traces, maintain separation from switching regulators and motor return paths, and use a solid ground reference near the connector. Validate the completed layout for overshoot, ringing, and immunity using the intended cable and enclosure.

Informações de conformidade

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The MAX3221ECPW comparison lists a RoHS-compliant code for that family member. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status are not explicitly established for the exact MAX3221MDBREP ordering suffix in the indexed product information.

Buscas relacionadas

max3221mdbrep datasheet MAX3221MDBREP datasheet pdf MAX3221MDBREP pinout MAX3221MDBREP specifications MAX3221MDBREP 16-SSOP MAX3221MDBREP RS-232 transceiver MAX3221MDBREP equivalent MAX3221MDBREP replacement MAX3221MDBREP drop-in replacement MAX3221MDBREP vs MAX3221CAE Texas Instruments MAX3221MDBREP MAX3221MDBREP price MAX3221MDBREP stock MAX3221MDBREP application circuit MAX3221MDBREP footprint

Componentes & termos relacionados

Texas Instruments MAX3221MDBREP MAX3221CAE MAX3221MDBREP.A MAX3221EAE MAX3221ECPW MAX3221EEUE+T RS-232 RS-232 transceiver line driver line receiver dual charge-pump circuit TIA/EIA-232-F ITU V.28 Human Body Model HBM 3.3 V logic 5 V logic 250 kbps 16-pin SSOP SSOP package surface-mount package serial-port interface battery-powered equipment industrial control
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ