MAX3221MDBREP - 250kbps RS-232 Transceiver | Texas Instruments
부품 번호: MAX3221MDBREP ✓ 활성MAX3221MDBREP 개요
An RS-232 transceiver is an interface IC that translates between TTL/CMOS logic levels and RS-232 voltage levels. The MAX3221 belongs to the RS-232 transceiver hierarchy, where it connects digital controllers or data terminals to external serial equipment. Its charge-pump circuit develops the positive and negative voltages required by RS-232 without a separate external DC supply.
The 3 V to 5.5 V operating range permits use in both 3.3 V and 5 V systems. The MAX3221MDBREP supports 250 kbps operation, accepts 5 V logic input with a 3.3 V supply, and provides bus-pin ESD protection exceeding ±15 kV using the human body model. Automatic power-down disables the driver when the interface is inactive to reduce power consumption.
Internally, the device combines one RS-232 line driver, one line receiver, and dual charge pumps with external flying capacitors. This architecture provides a compact solution for isolated or non-isolated point-to-point serial links. The SSOP-16 package is suitable for industrial and embedded equipment where one RS-232 channel is required and board area must remain modest.
Typical uses include serial-port adapters, diagnostic interfaces, industrial-control equipment, battery-powered instruments, and legacy peripheral connections. Placing the transceiver near the DB9 or equivalent connector helps limit exposure of the high-voltage RS-232 pins and improves protection against electrostatic discharge and externally coupled noise.
Design the external charge-pump capacitors and supply bypass capacitor according to the manufacturer datasheet. Confirm the connector-side ground, logic ground strategy, cable length, and data rate before releasing the layout. Do not expose TTL-side signals to RS-232 voltage levels or substitute the charge-pump capacitors with arbitrary ceramic values.
This product page consolidates the exact electrical ratings, package information, replacement analysis, interface use cases, and practical layout guidance for engineers evaluating the MAX3221MDBREP in a compact RS-232 design.
드롭인 대체품: MAX3221MDBREP — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MAX3221MDBREP (동일 폼 팩터 및 풋프린트) — 차이점: Package, Supply Voltage Range, Number of Drivers, Number of Receivers, Product Type.
MAX3221CAE+
✅ 드롭인가격 문의
데이터시트 보기 →MAX3221MDBREP.A
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX3221EAE+
✅ 드롭인가격 문의
데이터시트 보기 →MAX3221ECPW
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX3221EEUE+T
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX3221MDBREP 사양
| Product Type | Single-channel RS-232 line driver/receiver transceiver |
| Number of Drivers | 1 |
| Number of Receivers | 1 |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| RS-232 Bus-Pin ESD Protection | ±15 kV using the human body model |
| Charge-Pump Configuration | Dual charge-pump circuit |
| Logic Input Compatibility | Accepts 5 V logic input with a 3.3 V supply |
| Automatic Power-Down | Automatically disables the driver for power savings |
| Protocol | RS-232 |
| Interface Standard Compliance | TIA/EIA-232-F and ITU V.28 |
| 패키지 | 16-pin SSOP (DB) |
| Package Width | 5.30 mm |
| Lead Pitch | 0.025 inch |
| Packaging | Cut Tape |
| 동작 온도 범위 | -55 °C to 125 °C |
| RoHS 상태 | Compliant |
| Manufacturer | Texas Instruments |
MAX3221MDBREP 5.30 mm 핀 구성 가이드
MAX3221MDBREP(5.30 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: MAX3221MDBREP.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MAX3221MDBREP 적합 용도: 6 애플리케이션s: Industrial Serial-Port Adapter, Battery-Powered Diagnostic Instrument, Legacy Peripheral Connectivity, Point-of-Sale Terminal Interface, Telecommunications Equipment Console, Data Acquisition and Test Module.
Industrial Serial-Port Adapter
The MAX3221MDBREP fits an industrial serial-port adapter that must bridge 3.3 V or 5 V digital logic to a single RS-232 channel. Its 3 V to 5.5 V supply range and ability to accept 5 V logic input with a 3.3 V supply simplify interface design across different controller platforms. The device operates up to 250 kbps, making it appropriate for configuration links, service consoles, and legacy equipment. Its ±15 kV HBM bus-pin protection adds useful protection at the exposed connector interface, while the 16-pin SSOP package keeps the converter compact. Place the device close to the connector and route the RS-232 side away from sensitive logic to minimize ESD exposure and coupling.
추천
Battery-Powered Diagnostic Instrument
The MAX3221MDBREP is suitable for a battery-powered diagnostic instrument that uses a short RS-232 connection for configuration, logging, or service data. Automatic power-down disables the driver when the interface is inactive, reducing system power demand without requiring the host to manage the transceiver continuously. The 3 V to 5.5 V operating range accommodates common single-cell and regulated system rails. One transmitter and one receiver are sufficient for point-to-point service communication at rates up to 250 kbps. Because the RS-232 pins can carry substantially higher voltages than the logic side, maintain clear separation between connector and logic routing and use a protective ground strategy appropriate for the enclosure.
추천
Legacy Peripheral Connectivity
The MAX3221MDBREP provides a practical interface for connecting a modern controller to one legacy RS-232 peripheral. The single-driver, single-receiver arrangement supports bidirectional serial communication over one channel without adding multiple interface devices. Operation up to 250 kbps supports legacy data links that do not require modern multi-gigabit serial performance, while the ±15 kV HBM rating helps protect the external bus pins from electrostatic discharge. The dual charge-pump architecture supplies the bipolar RS-232 levels from a single 3 V to 5.5 V rail. Validate the peripheral's logic polarity, handshake behavior, cable length, and connector pinout before production use, because RS-232 implementations can differ at the application level.
추천
Point-of-Sale Terminal Interface
The MAX3221MDBREP can support a point-of-sale terminal or peripheral interface that uses one RS-232 channel for receipt printers, scales, or service equipment. The 250 kbps maximum data rate exceeds the throughput normally required for short transactional messages, while the 16-pin SSOP package limits board-space consumption. A 3.3 V or 5 V system rail can power the transceiver within its 3 V to 5.5 V input range. Automatic power-down reduces current use when the channel is inactive, which is useful in continuously operating retail equipment. Position the transceiver near the external connector, provide the required charge-pump capacitors, and keep the high-voltage RS-232 nets isolated from display and payment-security circuitry.
추천
Telecommunications Equipment Console
The MAX3221MDBREP is appropriate for a telecommunications equipment console that requires a local RS-232 service port. The extended -55 °C to 125 °C operating range supports equipment intended for varied environmental conditions, and the single-channel architecture matches a point-to-point management connection. Operation from 3 V to 5.5 V permits integration with embedded processors and field-programmable logic operating at either 3.3 V or 5 V. The ±15 kV HBM bus-pin protection assists with electrostatic events encountered during field installation and maintenance. Designers should still use a shielded enclosure, a defined chassis and logic-ground strategy, and short connector-side traces. Verify the console's baud rate remains within the 250 kbps operating limit.
추천
Data Acquisition and Test Module
The MAX3221MDBREP fits a compact data-acquisition or test module that needs to export measurements or accept setup commands through a legacy RS-232 port. The device's one-driver, one-receiver configuration is sufficient for command-and-response links, and its 250 kbps rate supports many laboratory and production-test protocols. The 3 V to 5.5 V supply range integrates with mixed-voltage test electronics, while automatic power-down limits consumption during idle periods. The 16-pin SSOP package supports space-constrained instrumentation. Place the transceiver near the DB9 or equivalent connector to keep the bipolar RS-232 routing short, maintain separation from analog measurement inputs, and follow the manufacturer values for the external charge-pump and bypass capacitors.
추천
추천 제품 요약
엔지니어링 참조 데이터: MAX3221MDBREP — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MAX3221CAE | MAX3221MDBREP.A | MAX3221EAE | MAX3221ECPW | MAX3221EEUE+T |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-SSOP | 16-SSOP - same | 16-SSOP - same | 16-SSOP - same | 16-SSOP - same | 16-SSOP - same |
| Driver/Receiver Count | 1 driver, 1 receiver | 1 driver, 1 receiver | 1 driver, 1 receiver | 1 transmitter, 1 receiver | 1 driver, 1 receiver | 1 driver, 1 receiver |
| ESD Protection | ±15 kV HBM on RS-232 bus pins | ±15 kV HBM | ±15 kV HBM | ±15 kV HBM | ±15 kV HBM | ±15 kV HBM |
주요 차별점
- Closest documented performance-equivalent replacement (vs MAX3221CAE)
- Enhanced-product manufacturing option (vs MAX3221MDBREP.A)
- Direct MAX3221 family function in the same footprint (vs MAX3221EAE)
- Clear lifecycle trade-off (vs MAX3221ECPW)
설계 노트
Place the MAX3221MDBREP close to the DB9 or equivalent connector so the RS-232 driver and receiver pins have short, direct routes. Keep the connector-side nets away from sensitive analog, clock, and high-speed digital traces. Route the external charge-pump capacitors close to their designated IC pins, use the recommended ground connection, and avoid routing connector-side nets beneath the transceiver or unrelated sensitive circuitry.
Do not treat the ±15 kV HBM bus-pin rating as complete lightning, surge, or cable-fault protection. Determine whether the installation requires external surge arrestors, longer ESD paths, or isolated power. Also verify connector pin assignments and logic polarity before energizing the board, because RS-232 signal names and handshake implementations are not standardized across every peripheral.
Use a supply that remains within the MAX3221MDBREP operating range of 3 V to 5.5 V, and provide the manufacturer-recommended bypass and charge-pump capacitors. The device accepts 5 V logic input with a 3.3 V supply, but this input tolerance does not permit the supply itself to exceed 5.5 V. Check capacitor voltage ratings, DC bias characteristics, and placement because the charge-pump network depends on low-impedance connections for stable operation.
Establish the grounding strategy before routing the board. RS-232 interfaces commonly use a signal reference and protective ground that may not be identical to the logic ground, and poor grounding can undermine noise immunity. Avoid long connector-side traces, maintain separation from switching regulators and motor return paths, and use a solid ground reference near the connector. Validate the completed layout for overshoot, ringing, and immunity using the intended cable and enclosure.
규정 준수 정보
The MAX3221ECPW comparison lists a RoHS-compliant code for that family member. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status are not explicitly established for the exact MAX3221MDBREP ordering suffix in the indexed product information.