Texas Instruments

MAX3243CPWRE4 - 3:5 RS-232 Transceiver | Texas Instruments

N.º da peça: MAX3243CPWRE4 ✗ Fim de vida
3 V to 5.5 V Vdss 28-pin TSSOP Package
MOQ: 1 |

MAX3243CPWRE4 Visão geral

The Texas Instruments MAX3243CPWRE4 is a 3:5 multichannel RS-232 line driver and receiver operating from a 3 V to 5.5 V supply. It supports data rates up to 250 kbps, provides three driver and five receiver channels, and includes plus or minus 15 kV human-body-model ESD protection on the interface pins. The device is offered in a 28-pin TSSOP package.

A multichannel RS-232 transceiver is an interface IC that combines the electrical drivers and receivers required to connect a low-voltage digital system to an RS-232 port. Within the interface hierarchy, it is both a line transceiver and a multichannel RS-232 interface IC. Its mixed driver-and-receiver arrangement supports equipment designs that need more receive channels than transmit channels, such as data acquisition, industrial control, test equipment, and multiport communications systems.

Key features include a 3 V to 5.5 V operating range, 250 kbps maximum signaling rate, three drivers, five receivers, and plus or minus 15 kV ESD protection rated to the human-body-model test method. The 28-pin TSSOP package provides a compact surface-mount footprint, while its gull-wing terminal arrangement supports automated assembly and conventional PCB routing.

The MAX3243 family uses charge-pump-assisted interface circuitry to generate the RS-232 bipolar voltage levels required by the standard. This allows the host-side logic to operate from a single 3 V or 5 V supply rather than requiring a separate negative rail for the RS-232 drivers. The transmitter handles the voltage translation and signal shaping, while the receiver converts the bipolar RS-232 input into a logic-compatible signal.

Typical uses include industrial serial controllers, programmable-logic-interface equipment, data loggers, point-of-sale terminals, test-and-measurement instruments, and embedded systems that connect a TTL or CMOS serial port to an RS-232 bus. The five receiver channels also make the device suitable for monitoring multiple inbound RS-232 signals, including modem-control or status lines.

The obsolete ordering code MAX3243CPWRE4 should not be used for new production releases without confirming an authorized supply route. For new designs, select the currently supported ordering option from the MAX3243 family and confirm the commercial temperature requirement, package fit, and availability before layout release.

This page consolidates the manufacturer device description, lifecycle information, package details, interface characteristics, and verified cross-reference findings. It also provides engineering guidance on supply-voltage design, ESD protection, logic compatibility, and the practical differences between current family members and the obsolete original ordering code.

Alternativas drop-in para MAX3243CPWRE4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MAX3243CPWRE4 (mesmo formato e footprint) — diferindo em ESD Protection.

Texas Instruments
ESD Protection: ±15 kV HBM
Comparar com MAX3243CPWRE4 →

MAX3243CPW

✅ Drop-In ⚠️ Especificações não verificadas
Texas Instruments
📦 28-pin TSSOP
Multichannel RS-232 line driver and receiver · 3 V to 5.5 V · 250 kbps · 3 · 5 · ±15 kV HBM · Serial-port connection pins, including GND · 28-pin TSSOP

Consulte o preço

Ver ficha técnica →

MAX3243CPW+

✅ Drop-In ⚠️ Especificações não verificadas
📦 28-pin TSSOP
Same MAX3243 family, 3 V to 5.5 V supply, 250 kbps rate, three drivers and five receivers; lead-free ordering suffix differs from the obsolete MAX3243CPWRE4

📋 Alternativa de referência (fora do catálogo)

MAX3243CSEY+

✅ Drop-In ⚠️ Especificações não verificadas
📦 28-pin TSSOP
Same MAX3243 electrical function and 28-pin TSSOP footprint; commercial temperature and ordering suffix differ from MAX3243CPWRE4

📋 Alternativa de referência (fora do catálogo)

MAX3243CPWRE4 Especificações

Product Type Multichannel RS-232 line driver and receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
Driver Channels 3
Receiver Channels 5
Total I/O Channels 8
ESD Protection ±15 kV (HBM)
Package Type 28-pin TSSOP
Terminal Count 28
Terminal Form Gull wing
Package Shape Rectangular
Tipo de montagem Surface mount
Temperature Grade Commercial
Transceiver Configuration 3/5

Guia de Configuração de Pinos do MAX3243CPWRE4 rectangular

Configuração de pinos para MAX3243CPWRE4 (pacote rectangular). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote rectangular para MAX3243CPWRE4

Nenhum dado detalhado de pinagem disponível para MAX3243CPWRE4.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MAX3243CPWRE4 é adequado para 6 aplicaçãos: Industrial Serial Controller Interface, Data Acquisition and Logging Equipment, Test and Measurement Instrument, Point-of-Sale Terminal and Peripherals, Multiport RS-232 Monitoring System, Legacy Embedded System Maintenance.

🏭

Industrial Serial Controller Interface

The MAX3243CPWRE4 fits an industrial controller that must communicate through an RS-232 port while monitoring several incoming signals. Its three drivers and five receivers support asymmetric traffic, and the 250 kbps maximum rate is more than sufficient for supervisory commands, status polling, and configuration traffic. The 3 V to 5.5 V operating range permits connection to 3.3 V or 5 V controller logic. Because the original ordering code is obsolete, an existing installation can retain it with qualified traceable stock, while a new controller should use a supported family option after confirming temperature and lifecycle requirements.

🖥️

Data Acquisition and Logging Equipment

Data loggers and acquisition units often need several incoming control or status signals but only one or two outbound command paths. The MAX3243CPWRE4 provides three drivers and five receivers in one 28-pin TSSOP package, reducing the number of separate interface components. Its 250 kbps data rate is appropriate for configuration and block-transfer traffic, while the 3 V to 5.5 V supply range supports both 3.3 V and 5 V system rails. Add external surge protection when cables leave the enclosure, since the specified plus or minus 15 kV HBM rating addresses ESD rather than industrial surge events.

🔧

Test and Measurement Instrument

A bench instrument can use the MAX3243CPWRE4 to connect legacy test equipment to a PC or embedded controller. The 250 kbps rate supports many RS-232 instrument protocols, and the five receivers permit observation of ready, busy, error, and remote-control lines. The 28-pin TSSOP package is practical for multi-board laboratory hardware, while operation from 3 V to 5.5 V allows the interface to share either a modern 3.3 V controller rail or a conventional 5 V logic rail. Validate the instrument's handshake timing and signal polarity during system integration.

💳

Point-of-Sale Terminal and Peripherals

The MAX3243CPWRE4 can support point-of-sale equipment that combines a host-controlled command channel with several incoming peripheral status signals. Three transmitter channels can carry commands or control lines, while five receiver inputs can monitor acknowledgments, readiness, and transaction indicators. Its 250 kbps maximum data rate is compatible with many legacy peripheral protocols, and the 3 V to 5.5 V supply range supports embedded POS controllers operating from either 3.3 V or 5 V. Confirm cable length, grounding, and connector-level surge requirements for each installation environment.

🌐

Multiport RS-232 Monitoring System

The five receive channels of the MAX3243CPWRE4 make it useful in systems that monitor multiple RS-232 status lines from one controller. The three driver outputs can provide control, reset, or enable signals where required. Operating from 3 V to 5.5 V supports mixed-voltage logic, and the 28-pin TSSOP footprint keeps the design compact. For long or industrial cables, use a protected connector, a defined ground reference, and appropriately coordinated surge protection; the device's plus or minus 15 kV HBM ESD rating does not replace an external overvoltage-protection network.

🧩

Legacy Embedded System Maintenance

The MAX3243CPWRE4 is appropriate for maintaining an existing embedded product that uses a 28-pin TSSOP MAX3243 footprint and cannot accept a PCB respin. Its 3 V to 5.5 V supply range and 250 kbps rate match the original interface role, while three drivers and five receivers preserve the established channel allocation. Because the ordering code is obsolete, maintenance demand should be met with traceable inventory and documented lot control. New production releases should evaluate a supported MAX3243 ordering option and verify every pin connection against the manufacturer datasheet before substitution.

Resumo dos produtos recomendados

MAX3243CPW+ Supported same-family TSSOP alternative for existing MAX3243 designs Usado em: Industrial Serial Controller Interface, Data Acquisition and Logging Equipment, Point-of-Sale Terminal and Peripherals, Multiport RS-232 Monitoring System MAX3243CPW Texas Instruments Usado em: Industrial Serial Controller Interface, Test and Measurement Instrument, Point-of-Sale Terminal and Peripherals, Legacy Embedded System Maintenance MAX3243CSEY+ Same-family commercial-temperature TSSOP option Usado em: Data Acquisition and Logging Equipment, Test and Measurement Instrument, Multiport RS-232 Monitoring System, Legacy Embedded System Maintenance
What is the operating voltage of MAX3243CPWRE4?
The MAX3243CPWRE4 operates from a 3 V to 5.5 V supply. According to the Texas Instruments MAX3243 product page and manufacturer datasheet, the device is a 3 V to 5.5 V multichannel RS-232 transceiver. This range allows it to interface with 3.3 V or 5 V host logic without a separate negative supply rail at the logic side. The transmitter still produces the bipolar voltage levels required by RS-232, while the receiver returns logic-compatible signals to the host controller.
What is the maximum data rate of MAX3243CPWRE4?
The MAX3243CPWRE4 supports signaling rates up to 250 kbps. The Texas Instruments MAX3243 product page identifies the device as a 250 kbps multichannel RS-232 line driver and receiver. This rate is appropriate for legacy serial ports, industrial controllers, data loggers, and equipment connections that operate well below the theoretical limit of common USB-to-serial adapters and modern high-speed serial links.
How many RS-232 drivers and receivers does MAX3243CPWRE4 have?
The MAX3243CPWRE4 has three RS-232 drivers and five receivers. The distributor listing describes it as a 3/5 transceiver, and the Texas Instruments device page confirms that it is a multichannel line driver and receiver. The extra receive channels are useful when the design must read several incoming control, status, or acknowledgment signals while transmitting on fewer channels.
What ESD protection does MAX3243CPWRE4 provide?
The MAX3243CPWRE4 provides plus or minus 15 kV human-body-model ESD protection. The Texas Instruments MAX3243 product page and manufacturer datasheet both identify plus or minus 15 kV HBM protection as a principal feature. This rating addresses direct human-body-model ESD events on exposed serial connectors, while external protection may still be required for severe industrial surges, long cable runs, or IEC-style surge requirements.
What package does MAX3243CPWRE4 use?
The MAX3243CPWRE4 uses a 28-pin TSSOP package with gull-wing terminals. The verified distributor listing identifies 28 terminals, a TSSOP package code, rectangular package shape, and gull-wing terminal form. The corresponding package drawing for this page is a 28-pin TSSOP. Confirm the land pattern and exposed-pad requirements against the ordering information in the manufacturer datasheet before releasing the PCB layout.
Is MAX3243CPWRE4 obsolete?
Yes, the MAX3243CPWRE4 ordering code is listed as obsolete and no longer manufactured. The verified DigiKey listing carries the obsolete designation, while the Texas Instruments product page covers the current MAX3243 family. New production designs should use a currently supported ordering option within that family and confirm the lifecycle status, temperature grade, and supply conditions before schematic approval.
Where can I download the MAX3243CPWRE4 datasheet PDF?
The official manufacturer datasheet is available from the Texas Instruments MAX3243 documentation link at https://www.ti.com/lit/ds/symlink/max3243.pdf. The document covers electrical characteristics, pin descriptions, interface operation, typical application circuits, package information, and ordering information for the MAX3243 family. Use the pin-description table and mechanical drawing in that document when assigning PCB nets and checking footprint compatibility.
Where can I find the MAX3243CPWRE4 pinout?
The MAX3243CPWRE4 pinout is found in the pin-description table of the Texas Instruments MAX3243 manufacturer datasheet. The device is a 28-pin TSSOP and includes three driver outputs, five receiver inputs, supply pins, ground connections, charge-pump-related pins, and enable-related connections. Use the manufacturer pin table to confirm signal names and alternate functions before routing the board, especially because some interface pins can support different operating states.
Can MAX3232EEUE+ replace MAX3243CPWRE4?
The MAX3232EEUE+ is a functional RS-232 alternative, but it is not a package-matched drop-in replacement for the MAX3243CPWRE4. The comparison identifies a different package and a different channel arrangement, while the MAX3243CPWRE4 provides three drivers and five receivers. A board change is therefore required rather than a simple component substitution. Use a current MAX3243 TSSOP ordering option when the original footprint and pin arrangement must be retained.
When should I choose MAX3243CPWRE4 over MAX3232EEUE+?
Choose the MAX3243 family when the design requires five receiver channels and three transmit channels in the MAX3243 TSSOP footprint. The MAX3232EEUE+ uses a different package and has fewer interface channels. The MAX3243CPWRE4 itself is obsolete, so its use is most appropriate for maintaining an existing qualified design, securing traceable original stock, or reproducing an existing board where a layout change would be costly.
Is MAX3243IDBR a drop-in replacement for MAX3243CPWRE4?
The MAX3243IDBR is not a drop-in replacement because the package and land pattern differ. The MAX3243CPWRE4 uses a 28-pin TSSOP, while the MAX3243IDBR is listed in a different package option. Although both devices implement the same MAX3243 family function and can provide closely related electrical performance, a PCB replacement requires different land patterns. A same-package MAX3243 ordering option is required for a no-layout-change substitution.
What can replace an obsolete MAX3243CPWRE4?
A currently supported MAX3243 ordering option in the 28-pin TSSOP package is the preferred replacement path. Same-family options include MAX3243CPW, MAX3243CPW+, and MAX3243CSEY+, but each ordering suffix should be checked for temperature range, qualification, and availability. Because the original MAX3243CPWRE4 is obsolete, request lifecycle confirmation through the Request a Quote form on this page and validate the complete pin description against the manufacturer datasheet.
What are the key specifications engineers should know about MAX3243CPWRE4?
The principal MAX3243CPWRE4 specifications are a 3 V to 5.5 V supply range, 250 kbps maximum data rate, three drivers, five receivers, plus or minus 15 kV HBM ESD protection, and a 28-pin TSSOP package. These figures come from the Texas Instruments MAX3243 product page and verified distributor records. The combination of five receive channels and a compact surface-mount footprint is the main reason engineers select this transceiver for multi-input RS-232 equipment.
Is MAX3243CPWRE4 suitable for a 3.3 V industrial controller?
The MAX3243CPWRE4 is electrically compatible with a 3.3 V host interface because its specified supply range includes 3 V to 5.5 V. It can therefore support a 3.3 V controller while handling the higher voltage swings of an RS-232 connection. Industrial qualification, temperature limits, isolation, surge protection, and grounding still require separate verification, and the obsolete lifecycle status should be addressed before using the original ordering code in a new production design.
How do I buy MAX3243CPWRE4 and check its price and lead time?
Use the Request a Quote form on this page to request current pricing, stock confirmation, and lead time for the MAX3243CPWRE4. The device is listed as obsolete, so supply may depend on traceable original inventory rather than routine manufacturer production. Specify the required quantity and packaging configuration in the request, and ask for lot traceability and date-code information when the parts will enter a production assembly.

Dados de referência de engenharia para MAX3243CPWRE4 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the MAX3243CPWRE4 for maintenance of an existing design that uses a 28-pin TSSOP MAX3243 interface, particularly when the board needs three transmit channels and five receive channels. Because the ordering code is obsolete, it is better suited to controlled use of traceable original inventory than to an unrestricted new-production launch. Choose MAX3243CPW or MAX3243CPW+ when a supported same-family TSSOP option is required, and confirm the exact temperature grade and qualification status. Choose MAX3243CSEY+ when the commercial-temperature ordering variant is confirmed to satisfy the design. Do not select MAX3232EEUE+ or MAX3243IDBR as drop-in replacements because their packages and channel arrangements differ; use them only when a PCB redesign and signal reassignment are acceptable.

Comparação com alternativas

Parâmetro Este produto MAX3243CPW MAX3243CPW+ MAX3243CSEY+
Package 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Function Multichannel RS-232 line driver and receiver Multichannel RS-232 line driver and receiver Multichannel RS-232 line driver and receiver Multichannel RS-232 line driver and receiver
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbps 250 kbps 250 kbps
Driver / Receiver Channels 3 drivers / 5 receivers 3 drivers / 5 receivers 3 drivers / 5 receivers 3 drivers / 5 receivers
ESD Protection ±15 kV HBM ±15 kV HBM ±15 kV HBM ±15 kV HBM

Principais diferenciais

  • Five receiver channels in a single mixed-channel transceiver (vs MAX3232EEUE+)
  • Obsolete original ordering code with documented family migration path (vs MAX3243CPW+)
  • Three to 5.5 V single-supply operation (vs MAX3243IDBR)

Notas de projeto

Do not treat the MAX3243 family as a universal RS-232 replacement. MAX3232EEUE+ has a different package and fewer channels, while MAX3243IDBR uses a different land pattern. Both require design changes rather than a direct board-level substitution. For a no-layout-change replacement, select a MAX3243 ordering option in the 28-pin TSSOP package and compare the manufacturer pin-description table for every net, including enable and charge-pump-related connections.

Decouple the 3 V to 5.5 V supply rail close to the device and route the ground return directly to the associated ground pins. Use the capacitance and layout values specified in the manufacturer datasheet rather than estimating from generic RS-232 examples. The interface's internal charge-pump circuitry can produce switching activity on the board, so maintain a compact supply loop and avoid routing sensitive analog or high-speed digital traces beneath the noisy region.

For cable-connected ports, keep the unprotected logic-side circuitry away from the connector and provide the longest practical separation between the transceiver and the cable entry. The specified plus or minus 15 kV HBM protection is an ESD rating rather than an industrial surge rating. If the port experiences severe transients, add coordinated external surge protection, chassis grounding, and an appropriate enclosure strategy while preserving the RS-232 signal path.

Assign all 28 physical pins from the manufacturer pin-description table, including supply, ground, charge-pump, enable, driver, and receiver functions. Do not infer an unused receiver or driver connection solely from the 3/5 channel ratio. A TSSOP footprint has closely spaced leads, so verify pad dimensions, solder-mask clearance, paste volume, and the assembled pin-1 orientation against the current package drawing before PCB fabrication.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The verified records identify the MAX3243CPWRE4 as a commercial-temperature RS-232 interface IC, but they do not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is marked not applicable because this is a commercial interface IC rather than an automotive-qualified device.

Dados verificados em: 2026-11-09 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MAX3243CPWRE4 datasheet MAX3243CPWRE4 datasheet pdf MAX3243CPWRE4 pinout MAX3243CPWRE4 replacement MAX3243CPWRE4 equivalent MAX3243CPWRE4 cross reference MAX3243CPWRE4 28-TSSOP MAX3243CPWRE4 250 kbps MAX3243CPWRE4 15kV ESD Texas Instruments MAX3243CPWRE4 MAX3243CPWRE4 obsolete replacement MAX3243CPWRE4 RS-232 transceiver MAX3243CPWRE4 price MAX3243CPWRE4 stock MAX3243CPWRE4 industrial controller interface

Componentes & termos relacionados

Texas Instruments MAX3243 MAX3243CPWRE4 MAX3243CPW MAX3243CPW+ MAX3243CSEY+ MAX3232EEUE+ MAX3243IDBR RS-232 multichannel RS-232 transceiver line driver line receiver interface IC semiconductor TTL CMOS 250 kbps 3 V to 5.5 V ±15 kV HBM ESD protection 28-pin TSSOP TSSOP package family surface mount SMD industrial control data acquisition point-of-sale terminal test and measurement charge pump RoHS REACH
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ