MAX3243CPWRE4 - 3:5 RS-232 Transceiver | Texas Instruments
MPN: MAX3243CPWRE4 ✗ Son Kullanım ZamanıMAX3243CPWRE4 Genel Bakış
A multichannel RS-232 transceiver is an interface IC that combines the electrical drivers and receivers required to connect a low-voltage digital system to an RS-232 port. Within the interface hierarchy, it is both a line transceiver and a multichannel RS-232 interface IC. Its mixed driver-and-receiver arrangement supports equipment designs that need more receive channels than transmit channels, such as data acquisition, industrial control, test equipment, and multiport communications systems.
Key features include a 3 V to 5.5 V operating range, 250 kbps maximum signaling rate, three drivers, five receivers, and plus or minus 15 kV ESD protection rated to the human-body-model test method. The 28-pin TSSOP package provides a compact surface-mount footprint, while its gull-wing terminal arrangement supports automated assembly and conventional PCB routing.
The MAX3243 family uses charge-pump-assisted interface circuitry to generate the RS-232 bipolar voltage levels required by the standard. This allows the host-side logic to operate from a single 3 V or 5 V supply rather than requiring a separate negative rail for the RS-232 drivers. The transmitter handles the voltage translation and signal shaping, while the receiver converts the bipolar RS-232 input into a logic-compatible signal.
Typical uses include industrial serial controllers, programmable-logic-interface equipment, data loggers, point-of-sale terminals, test-and-measurement instruments, and embedded systems that connect a TTL or CMOS serial port to an RS-232 bus. The five receiver channels also make the device suitable for monitoring multiple inbound RS-232 signals, including modem-control or status lines.
The obsolete ordering code MAX3243CPWRE4 should not be used for new production releases without confirming an authorized supply route. For new designs, select the currently supported ordering option from the MAX3243 family and confirm the commercial temperature requirement, package fit, and availability before layout release.
This page consolidates the manufacturer device description, lifecycle information, package details, interface characteristics, and verified cross-reference findings. It also provides engineering guidance on supply-voltage design, ESD protection, logic compatibility, and the practical differences between current family members and the obsolete original ordering code.
Drop-in alternatifler için MAX3243CPWRE4 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller MAX3243CPWRE4 (aynı form faktörü ve ayağa oturma) — farklı olan ESD Protection.
MAX3243CPW
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MAX3243CPW+
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MAX3243CSEY+
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MAX3243CPWRE4 Özellikler
| Product Type | Multichannel RS-232 line driver and receiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| Driver Channels | 3 |
| Receiver Channels | 5 |
| Total I/O Channels | 8 |
| ESD Protection | ±15 kV (HBM) |
| Package Type | 28-pin TSSOP |
| Terminal Count | 28 |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Montaj Türü | Surface mount |
| Temperature Grade | Commercial |
| Transceiver Configuration | 3/5 |
MAX3243CPWRE4 rectangular Pin Yapısı Kılavuzu
MAX3243CPWRE4 (rectangular paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: MAX3243CPWRE4.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MAX3243CPWRE4 için uygundur 6 uygulamas: Industrial Serial Controller Interface, Data Acquisition and Logging Equipment, Test and Measurement Instrument, Point-of-Sale Terminal and Peripherals, Multiport RS-232 Monitoring System, Legacy Embedded System Maintenance.
Industrial Serial Controller Interface
The MAX3243CPWRE4 fits an industrial controller that must communicate through an RS-232 port while monitoring several incoming signals. Its three drivers and five receivers support asymmetric traffic, and the 250 kbps maximum rate is more than sufficient for supervisory commands, status polling, and configuration traffic. The 3 V to 5.5 V operating range permits connection to 3.3 V or 5 V controller logic. Because the original ordering code is obsolete, an existing installation can retain it with qualified traceable stock, while a new controller should use a supported family option after confirming temperature and lifecycle requirements.
Önerilen
Data Acquisition and Logging Equipment
Data loggers and acquisition units often need several incoming control or status signals but only one or two outbound command paths. The MAX3243CPWRE4 provides three drivers and five receivers in one 28-pin TSSOP package, reducing the number of separate interface components. Its 250 kbps data rate is appropriate for configuration and block-transfer traffic, while the 3 V to 5.5 V supply range supports both 3.3 V and 5 V system rails. Add external surge protection when cables leave the enclosure, since the specified plus or minus 15 kV HBM rating addresses ESD rather than industrial surge events.
Önerilen
Test and Measurement Instrument
A bench instrument can use the MAX3243CPWRE4 to connect legacy test equipment to a PC or embedded controller. The 250 kbps rate supports many RS-232 instrument protocols, and the five receivers permit observation of ready, busy, error, and remote-control lines. The 28-pin TSSOP package is practical for multi-board laboratory hardware, while operation from 3 V to 5.5 V allows the interface to share either a modern 3.3 V controller rail or a conventional 5 V logic rail. Validate the instrument's handshake timing and signal polarity during system integration.
Önerilen
Point-of-Sale Terminal and Peripherals
The MAX3243CPWRE4 can support point-of-sale equipment that combines a host-controlled command channel with several incoming peripheral status signals. Three transmitter channels can carry commands or control lines, while five receiver inputs can monitor acknowledgments, readiness, and transaction indicators. Its 250 kbps maximum data rate is compatible with many legacy peripheral protocols, and the 3 V to 5.5 V supply range supports embedded POS controllers operating from either 3.3 V or 5 V. Confirm cable length, grounding, and connector-level surge requirements for each installation environment.
Önerilen
Multiport RS-232 Monitoring System
The five receive channels of the MAX3243CPWRE4 make it useful in systems that monitor multiple RS-232 status lines from one controller. The three driver outputs can provide control, reset, or enable signals where required. Operating from 3 V to 5.5 V supports mixed-voltage logic, and the 28-pin TSSOP footprint keeps the design compact. For long or industrial cables, use a protected connector, a defined ground reference, and appropriately coordinated surge protection; the device's plus or minus 15 kV HBM ESD rating does not replace an external overvoltage-protection network.
Önerilen
Legacy Embedded System Maintenance
The MAX3243CPWRE4 is appropriate for maintaining an existing embedded product that uses a 28-pin TSSOP MAX3243 footprint and cannot accept a PCB respin. Its 3 V to 5.5 V supply range and 250 kbps rate match the original interface role, while three drivers and five receivers preserve the established channel allocation. Because the ordering code is obsolete, maintenance demand should be met with traceable inventory and documented lot control. New production releases should evaluate a supported MAX3243 ordering option and verify every pin connection against the manufacturer datasheet before substitution.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MAX3243CPWRE4 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MAX3243CPW | MAX3243CPW+ | MAX3243CSEY+ |
|---|---|---|---|---|
| Package | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Function | Multichannel RS-232 line driver and receiver | Multichannel RS-232 line driver and receiver | Multichannel RS-232 line driver and receiver | Multichannel RS-232 line driver and receiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps | 250 kbps | 250 kbps |
| Driver / Receiver Channels | 3 drivers / 5 receivers | 3 drivers / 5 receivers | 3 drivers / 5 receivers | 3 drivers / 5 receivers |
| ESD Protection | ±15 kV HBM | ±15 kV HBM | ±15 kV HBM | ±15 kV HBM |
Ana Farklılayıcılar
- Five receiver channels in a single mixed-channel transceiver (karşılaştırma:MAX3232EEUE+)
- Obsolete original ordering code with documented family migration path (karşılaştırma:MAX3243CPW+)
- Three to 5.5 V single-supply operation (karşılaştırma:MAX3243IDBR)
Tasarım Notları
Do not treat the MAX3243 family as a universal RS-232 replacement. MAX3232EEUE+ has a different package and fewer channels, while MAX3243IDBR uses a different land pattern. Both require design changes rather than a direct board-level substitution. For a no-layout-change replacement, select a MAX3243 ordering option in the 28-pin TSSOP package and compare the manufacturer pin-description table for every net, including enable and charge-pump-related connections.
Decouple the 3 V to 5.5 V supply rail close to the device and route the ground return directly to the associated ground pins. Use the capacitance and layout values specified in the manufacturer datasheet rather than estimating from generic RS-232 examples. The interface's internal charge-pump circuitry can produce switching activity on the board, so maintain a compact supply loop and avoid routing sensitive analog or high-speed digital traces beneath the noisy region.
For cable-connected ports, keep the unprotected logic-side circuitry away from the connector and provide the longest practical separation between the transceiver and the cable entry. The specified plus or minus 15 kV HBM protection is an ESD rating rather than an industrial surge rating. If the port experiences severe transients, add coordinated external surge protection, chassis grounding, and an appropriate enclosure strategy while preserving the RS-232 signal path.
Assign all 28 physical pins from the manufacturer pin-description table, including supply, ground, charge-pump, enable, driver, and receiver functions. Do not infer an unused receiver or driver connection solely from the 3/5 channel ratio. A TSSOP footprint has closely spaced leads, so verify pad dimensions, solder-mask clearance, paste volume, and the assembled pin-1 orientation against the current package drawing before PCB fabrication.
Uyumluluk Bilgisi
The verified records identify the MAX3243CPWRE4 as a commercial-temperature RS-232 interface IC, but they do not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is marked not applicable because this is a commercial interface IC rather than an automotive-qualified device.