Texas Instruments

MAX3243EIPWE4 - 3/5 RS-232 Transceiver | Texas Instruments

N.º da peça: MAX3243EIPWE4 ✓ Ativo
3 V to 5.5 V Vdss TSSOP-28 Package
MOQ: 1 |

MAX3243EIPWE4 Visão geral

Texas Instruments MAX3243EIPWE4 is a 3-to-5.5 V multichannel RS-232 line driver and receiver with three drivers, five receivers, 250 kbps operation, and ±15 kV ESD protection in a 28-pin TSSOP package. It provides the physical-layer interface between RS-232 cable signals and TTL or CMOS-compatible logic used by embedded and industrial equipment.

An RS-232 transceiver is an interface IC that converts between single-ended, bipolar RS-232 voltage levels and the lower-voltage logic levels used by digital circuits. The MAX3243 belongs to the broader line-driver and receiver hierarchy, combining three transmit channels with five receive channels in one device. Its multichannel arrangement allows one package to support several serial ports or a mixture of host and peripheral connections while reducing the number of interface components on the PCB.

The MAX3243EIPWE4 operates from a 3 V to 5.5 V supply, making it suitable for systems using either 3.3 V or 5 V logic. Its stated maximum data rate of 250 kbps addresses conventional RS-232 links used by embedded controllers, test equipment, industrial controls, and point-of-sale systems. ±15 kV electrostatic-discharge protection helps improve robustness on connector-adjacent circuits where cables can expose equipment to electrostatic discharge.

The industrial temperature grade, rectangular gull-wing TSSOP-28 package, and 28 terminals make the device appropriate for leaded-surface-mount industrial assemblies. Operating from a 3 V to 5.5 V supply also allows logic-level sharing with modern microcontrollers and programmable controllers. The three-driver and five-receiver arrangement can conserve board area compared with separate one-channel line-driver and receiver packages when several RS-232 signals must be handled.

When designing the interface, connect each driver to the appropriate RS-232 TX and receiver to the RS-232 RX lines, then keep logic-side signals within the supply voltage. Place the required charge-pump capacitors and interface-network components according to the manufacturer datasheet. Route the exposed connector and cable paths away from sensitive logic, and provide the specified ESD-protection network where the transceiver is not adjacent to the connector.

For reliable operation, verify that the selected UART supports the required 250 kbps line rate and that the cable length and baud rate satisfy RS-232 practice. Ensure power sequencing does not enable the interface before its logic supply is stable. This page compares the MAX3243EIPWE4 with documented alternatives and summarizes package, channel-count, speed, protection, and supply considerations for faster engineering selection.

Alternativas drop-in para MAX3243EIPWE4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

SP3243EBCY-L

✅ Drop-In
📦 TSSOP-28
Maximum data rate is 500 kbps versus 250 kbps for MAX3243EIPWE4, with matching terminals and package reported by the comparison

📋 Alternativa de referência (fora do catálogo)

MAX3243EIPWE4 Especificações

Product Type Multichannel RS-232 line driver/receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
ESD Protection ±15 kV
Number of Drivers 3
Number of Receivers 5
Duplex Operation Full duplex
Logic Compatibility TTL/CMOS
Package Type TSSOP-28
Terminal Count 28
Terminal Form Gull wing
Package Shape Rectangular
Tipo de montagem Surface mount
Temperature Grade Industrial

Guia de Configuração de Pinos do MAX3243EIPWE4 rectangular

Configuração de pinos para MAX3243EIPWE4 (pacote rectangular). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote rectangular para MAX3243EIPWE4

Nenhum dado detalhado de pinagem disponível para MAX3243EIPWE4.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MAX3243EIPWE4 é adequado para 6 aplicaçãos: Industrial Controller Serial Interfaces, Embedded Equipment Communication, Test and Measurement Equipment, Point-of-Sale and Retail Systems, Data Acquisition and Control Panels, Security and Access-Control Equipment.

🏭

Industrial Controller Serial Interfaces

The MAX3243EIPWE4 suits industrial controllers that need several RS-232 ports for sensors, programmers, meters, or service equipment. Its three drivers and five receivers provide more channel density than separate single-channel transceivers, while the 3 V to 5.5 V supply range accommodates common industrial logic levels. The 250 kbps maximum rate supports conventional serial control protocols. Designers should place the manufacturer-specified charge-pump capacitors close to the device and use ESD-protection components when the connector is remote from the transceiver.

🔧

Embedded Equipment Communication

The MAX3243EIPWE4 can bridge a microcontroller UART and RS-232 equipment used for configuration, logging, or service diagnostics. Three transmit channels support commands and status signals, while five receive channels can accept acknowledgments, measurements, or responses from multiple devices. Operation from 3 V to 5.5 V permits use with both 3.3 V and 5 V controllers. Keep the logic-side traces short, confirm UART baud-rate capability, and validate the external capacitor and protection network in the final enclosure.

🖥️

Test and Measurement Equipment

The MAX3243EIPWE4 is appropriate for test instruments and laboratory interfaces that exchange commands and results over RS-232. The 250 kbps rate is appropriate for many low- and medium-speed measurement protocols, and the five receiver channels can monitor several status or acknowledgment inputs. The industrial temperature grade supports equipment operated across demanding ambient conditions. Use short, properly terminated logic traces, preserve the recommended charge-pump layout, and keep unprotected cable conductors away from sensitive analog circuitry.

🛒

Point-of-Sale and Retail Systems

Point-of-sale terminals, scanners, and peripherals can use the MAX3243EIPWE4 for multiple RS-232 connections to displays, scales, scanners, or service equipment. Three driver channels cover outbound commands and data, while five receiver channels support inbound responses and status lines. Its 3 V to 5.5 V operating range integrates with mixed logic systems, and ±15 kV ESD protection adds useful robustness at connector-facing locations. Verify cable length against the intended baud rate and place protection components at the connector entry.

📟

Data Acquisition and Control Panels

The MAX3243EIPWE4 fits acquisition panels that receive commands from a host and return data from multiple instruments or control modules. Five receiver inputs reduce the number of packages required when several devices report status, while three outputs can provide control or query signals. The 250 kbps maximum rate accommodates many legacy instrumentation protocols. Confirm ground-referenced logic compatibility, use the manufacturer-recommended charge-pump capacitor arrangement, and provide local ESD protection where long external cables enter the enclosure.

🛡️

Security and Access-Control Equipment

Access-control panels and security peripherals can use the MAX3243EIPWE4 to connect a controller to readers, alarm modules, or configuration tools through RS-232. The device combines three transmit and five receive channels in one 28-pin TSSOP, reducing board-space requirements in compact equipment. Its 3 V to 5.5 V range supports common embedded logic families, and the stated ±15 kV ESD protection supports protection planning for connector-accessible circuitry. Add surge and ESD networks appropriate to the installation environment and maintain proper chassis grounding.

What is the MAX3243EIPWE4?
The MAX3243EIPWE4 is a Texas Instruments multichannel RS-232 line driver and receiver with three transmit channels, five receive channels, and a maximum data rate of 250 kbps. According to the manufacturer product page, it operates from 3 V to 5.5 V and provides ±15 kV ESD protection. The device is packaged in a 28-pin TSSOP and is intended for embedded, industrial, and test-equipment serial interfaces.
What are the key specifications of MAX3243EIPWE4 that engineers should know?
The principal MAX3243EIPWE4 specifications are a 3 V to 5.5 V supply range, 250 kbps maximum data rate, three drivers, five receivers, full-duplex operation, and ±15 kV ESD protection. According to the Texas Instruments MAX3243 product page, the device converts between RS-232 signals and TTL/CMOS logic. Its industrial-grade 28-pin TSSOP package supports surface-mount assembly on equipment with multiple serial channels.
How many RS-232 drivers and receivers does MAX3243EIPWE4 have?
The MAX3243EIPWE4 contains three RS-232 drivers and five RS-232 receivers. According to the Texas Instruments product description, this 3/5 arrangement supports several communication lines in one package. The channel imbalance can suit systems that require more receive inputs than transmit outputs, while full-duplex operation permits simultaneous sending and receiving on supported channels.
What is the operating voltage of MAX3243EIPWE4?
The MAX3243EIPWE4 operates from a 3 V to 5.5 V supply. According to the manufacturer product page, this range supports both 3.3 V and 5 V system logic. The selected supply must be compatible with the UART or controller connected to the logic-side pins, and the interface should remain disabled until the associated logic rail is stable.
What is the maximum data rate of MAX3243EIPWE4?
The MAX3243EIPWE4 supports RS-232 data rates up to 250 kbps. According to the Texas Instruments MAX3243 product page, the device is a 3- to 5.5-V multichannel line driver/receiver. Actual system throughput also depends on UART capability, cable characteristics, signal integrity, and the protocol implemented by the connected equipment.
What can replace the MAX3243EIPWE4?
The SP3243EBCY-L is a documented 28-pin TSSOP replacement candidate for the MAX3243EIPWE4. A published comparison describes it as a complete replacement with consistent terminals, packages, and principal performance characteristics. Its stated data rate is 500 kbps rather than 250 kbps, so designers should still verify charge-pump capacitor values, shutdown behavior, and all operating conditions before production use.
Is MAX3243EIPWE4 suitable for industrial equipment?
The MAX3243EIPWE4 is marked with an industrial temperature grade and uses a surface-mount 28-pin TSSOP package. According to distributor product information, it is a 3/5 full-RS-232 transceiver. Its 3 V to 5.5 V supply range, 250 kbps operation, and ±15 kV ESD protection make it appropriate for industrial controllers and embedded equipment requiring multiple protected RS-232 channels.
Where can I download the MAX3243EIPWE4 datasheet PDF?
The official MAX3243 datasheet and product resources are available through the Texas Instruments product page at https://www.ti.com/product/MAX3243. The manufacturer page links the electrical characteristics, ordering information, pin information, and application support for the MAX3243 family. Use the ordering information to confirm that MAX3243EIPWE4 corresponds to the required industrial-temperature, 28-pin TSSOP configuration.
Where can I find the MAX3243EIPWE4 pinout?
The MAX3243EIPWE4 pin assignment is documented in the pin-description section of the Texas Instruments MAX3243 datasheet. The device uses a 28-pin TSSOP package and contains three driver channels and five receiver channels. Assign PCB tracks from the manufacturer's pin-description table and verify exposed-pad, supply, ground, charge-pump, and driver/receiver connections before layout release.
What is the difference between MAX3243EIPWE4 and SP3243EBCY-L?
The main documented difference is the stated maximum data rate: MAX3243EIPWE4 operates at up to 250 kbps, while the SP3243EBCY-L comparison lists 500 kbps. Both use a 28-pin TSSOP format, and the published comparison describes the SP3243EBCY-L as a complete replacement. Confirm pin-level behavior, capacitor requirements, and operating conditions in each manufacturer’s documentation before substitution.
When should I choose MAX3243EIPWE4 over SP3243EBCY-L?
Choose the MAX3243EIPWE4 when an established Texas Instruments device with a specified 250 kbps maximum rate and three-driver, five-receiver configuration matches your interface requirements. Choose the SP3243EBCY-L when its 500 kbps capability and documented 28-pin TSSOP compatibility are useful. The decision should also account for supply sequencing, shutdown logic, charge-pump capacitance, and qualification requirements.
Is SP3243EBCY-L a drop-in replacement for MAX3243EIPWE4?
The SP3243EBCY-L is a drop-in replacement candidate because the published comparison identifies matching terminals, package, and principal performance characteristics. The MAX3243EIPWE4 is rated to 250 kbps, while the alternative is listed at 500 kbps. A footprint-compatible part does not remove the need to compare pin behavior, external capacitor values, enable or shutdown functions, and operating-temperature limits.
What is the best STMicroelectronics equivalent for MAX3243EIPWE4?
The ST3243ECTR-E is a cross-brand comparison candidate identified for the MAX3243EIPWE4, but the available listing does not explicitly confirm its package and pin compatibility. Do not treat it as a drop-in substitute without comparing the STMicroelectronics datasheet against the Texas Instruments pinout. In particular, verify the 28-pin TSSOP footprint, three drivers, five receivers, supply range, and external charge-pump capacitor requirements.
How do I design the RS-232 interface around MAX3243EIPWE4?
Design the MAX3243EIPWE4 as the physical interface between the UART logic and the RS-232 connector. Connect the logic-side pins to the controller, place the charge-pump capacitors exactly as specified in the manufacturer datasheet, and use the appropriate series-resistance and protection network on cable-facing pins. Keep the connector and cable routes away from sensitive traces, and maintain a stable supply before enabling the interface.
Does MAX3243EIPWE4 require external charge-pump capacitors?
The MAX3243EIPWE4 requires the external charge-pump capacitors shown in the manufacturer’s application circuit because its internal topology generates the RS-232 voltage levels. According to the Texas Instruments MAX3243 datasheet, capacitor values and layout must follow the recommended application information. Place these components close to their designated pins, and verify the final network against the selected operating mode and cable configuration.
Where to buy MAX3243EIPWE4 online?
The MAX3243EIPWE4 can be requested through the Request a Quote form on this product page. The form is the appropriate route for current commercial terms, stock confirmation, lead time, and order handling because market conditions change. Before requesting a quote, provide the exact MPN, quantity, and required package or shipment configuration so the request is matched precisely.
What is the price of MAX3243EIPWE4?
Current pricing for the MAX3243EIPWE4 should be obtained through the Request a Quote form on this page. The form supports a direct commercial response for the exact manufacturer part number rather than relying on a static market value that may quickly become outdated. Include the required quantity, target delivery location, and preferred packaging details in the request.
What is the lead time and stock status for MAX3243EIPWE4?
Current stock and lead-time information for MAX3243EIPWE4 should be confirmed through the Request a Quote form on this page. The exact Texas Instruments MPN, requested quantity, and delivery requirements determine the applicable allocation and schedule. Requesting these details with the order inquiry avoids relying on a generic family-level availability statement.

Dados de referência de engenharia para MAX3243EIPWE4 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the MAX3243EIPWE4 when a three-driver, five-receiver RS-232 interface operating at up to 250 kbps is required in a 28-pin TSSOP package. It is especially suitable for systems using 3.3 V or 5 V logic that need an industrial-grade component with a documented ±15 kV ESD rating. Consider the SP3243EBCY-L when its listed 500 kbps rate or sourcing strategy adds value; the published comparison identifies matching 28-pin TSSOP terminals and package. Before substitution, verify charge-pump capacitance, shutdown behavior, logic thresholds, temperature range, and ESD performance. Do not use MAX3232-family devices for a direct replacement because their fewer channels and different package require PCB redesign. For new high-speed designs, first confirm that 250 kbps is sufficient rather than selecting solely on the higher alternative rating.

Comparação com alternativas

Parâmetro Este produto SP3243EBCY-L
Brand Texas Instruments MaxLinear
Package TSSOP-28 TSSOP-28
Product Type Multichannel RS-232 line driver/receiver Multichannel RS-232 transceiver
Maximum Data Rate 250 kbps 500 kbps
Drivers 3 3
Receivers 5 5
Mounting Type Surface mount Surface mount

Principais diferenciais

  • Five receive channels provide more receive density than the three available transmit channels (vs SP3243EBCY-L)
  • Defined 250 kbps maximum data rate (vs SP3243EBCY-L)
  • Specified ±15 kV ESD protection (vs SP3243EBCY-L)

Notas de projeto

Place the charge-pump capacitors and the transceiver input and output network close to their associated pins. Keep the high-voltage RS-232 driver traces away from UART logic, clocks, analog inputs, and sensitive return paths. Use the manufacturer’s application circuit as the layout baseline, minimize loop area, and connect the device ground directly to a quiet ground plane rather than routing it through switching-current paths.

Treat the RS-232 connector as an electrostatic-discharge entry point. Position the specified protection network at the connector, use the shortest practical connection to the driver and receiver pins, and maintain the recommended series resistance. Confirm that the cable, baud rate, and grounding arrangement are appropriate for the installation because ESD protection does not replace correct RS-232 signal integrity practices.

Do not substitute a reduced-channel device without rewriting the PCB, and do not treat a shared TSSOP-28 outline as proof of compatibility. Verify every pin, the charge-pump capacitor values, shutdown behavior, and the driver and receiver logic states against both datasheets. The SP3243EBCY-L is reported as a complete 28-pin replacement, while the MAX3243EIPWR is a reel-ordering form of the same device and should not be counted as a distinct functional alternative.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer product page identifies the MAX3243 as an industrial-temperature RS-232 interface with ±15 kV ESD protection. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation.

Dados verificados em: 2026-11-09 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MAX3243EIPWE4 MAX3243EIPWE4 datasheet MAX3243EIPWE4 datasheet pdf MAX3243EIPWE4 pinout MAX3243EIPWE4 equivalent MAX3243EIPWE4 replacement MAX3243EIPWE4 cross reference MAX3243EIPWE4 vs SP3243EBCY-L MAX3243EIPWE4 250 kbps RS-232 MAX3243EIPWE4 TSSOP-28 Texas Instruments MAX3243EIPWE4 MAX3243EIPWE4 industrial interface MAX3243EIPWE4 price MAX3243EIPWE4 stock

Componentes & termos relacionados

Texas Instruments MAX3243EIPWE4 MAX3243 SP3243EBCY-L MaxLinear RS-232 RS-232 transceiver line driver line receiver interface IC TTL CMOS full duplex 250 kbps 3 V to 5.5 V ±15 kV ESD protection TSSOP-28 TSSOP package family surface-mount package industrial temperature grade charge-pump capacitor electrostatic discharge embedded systems industrial controls
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ