Texas Instruments

MAX3243EIPWRG4 - 3 to 5.5V 500kbps RS-232 Transceiver | Texas Instruments

N.º da peça: MAX3243EIPWRG4 ✓ Ativo
3 V to 5.5 V Vdss 28-pin TSSOP Package
MOQ: 1 |

MAX3243EIPWRG4 Visão geral

Texas Instruments MAX3243EIPWRG4 is a multichannel RS-232 line driver and receiver designed for 3 to 5.5 V operation, 500 kbps data rates, and enhanced electrostatic-discharge protection. The device is packaged in a 28-pin TSSOP and is supplied in tape-and-reel packaging for surface-mount assembly. It provides a 500 mV receiver hysteresis according to the manufacturer product information, helping improve noise immunity on unidirectional RS-232 links. The MAX3243E family is suitable for industrial, embedded, and communications equipment requiring multiple serial-driver and receiver channels in one package.

An RS-232 transceiver is an interface IC that combines voltage-conversion driver and receiver functions for the RS-232 standard. RS-232 uses single-ended, bipolar signaling in which the logic state at a host or peripheral is translated into a voltage suitable for transmission over a cable. The MAX3243EIPWRG4 belongs to the broader interface-IC hierarchy, combining communication line-driver and line-receiver functions into a surface-mount mixed-signal device.

Key features include a 3 to 5.5 V supply range, operation up to 500 kbps, multichannel driver and receiver support, and ±15 kV IEC ESD protection. The 500 kbps capability makes the device useful for moderately high-speed serial links while retaining compatibility with lower-speed RS-232 equipment. Its 500 mV receiver hysteresis provides a defined transition region and improves tolerance of noise present on the receiver input.

The MAX3243E architecture is intended for portable and embedded systems where low supply voltage, compactness, and robust serial-interface protection are important. A single device can support several RS-232 channels while reducing the number of separate driver and receiver packages required on the PCB. This integration can simplify routing and conserve board area, although each connected port still requires appropriate signal-line and return-path consideration.

Typical applications include industrial control systems, test and measurement equipment, data-acquisition units, point-of-sale terminals, security equipment, and embedded serial-port controllers. The 28-pin TSSOP package is compatible with automated surface-mount assembly, while the 3 V minimum supply allows operation in systems that cannot support a traditional 5 V-only RS-232 interface without level translation.

During layout, place the device close to the connector and preserve short, direct paths for each driver and receiver signal. Keep the RS-232 traces away from sensitive analog and high-speed digital nets, and connect the protection and bypass paths using the manufacturer datasheet pin-assignment guidance. Verify the complete pinout and recommended capacitor values before releasing the PCB.

This page organizes the key electrical characteristics, package details, application guidance, design notes, and qualified same-package replacement options for engineers evaluating the MAX3243EIPWRG4. It is intended to support design selection and PCB planning without relying on a generic distributor specification summary.

Alternativas drop-in para MAX3243EIPWRG4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MAX3243EIPWRG4 (mesmo formato e footprint) — diferindo em ESD Protection, Maximum Data Rate, Operating Temperature Range, Package.

Texas Instruments
ESD Protection: plus or minus 15 kV IEC ESD protection
Operating Temperature Range: -40°C to +85°C
Package: 28-pin TSSOP (PW)
Comparar com MAX3243EIPWRG4 →
Texas Instruments
ESD Protection: ±15 kV
Maximum Data Rate: 250 kbps
Comparar com MAX3243EIPWRG4 →
Texas Instruments
ESD Protection: ±15 kV HBM
Maximum Data Rate: 250 kbps
Operating Temperature Range: 0 °C to 70 °C
Comparar com MAX3243EIPWRG4 →

MAX3243IPWRG4

✅ Drop-In
Texas Instruments
📦 28-pin TSSOP
RS-232 line driver and receiver · 3 · 3 · 3 V to 5.5 V · 250 kbps · ±15 kV HBM · 1 uA · CMOS

Consulte o preço

Ver ficha técnica →

MAX3243IPWRDL

✅ Drop-In
Texas Instruments
📦 28-pin TSSOP
Multichannel RS-232 line driver/receiver · 3 V to 5.5 V · 250 kbps · ±15 kV · RS-232 · 28-pin TSSOP · Surface mount

Consulte o preço

Ver ficha técnica →

MAX3243EIPW

✅ Drop-In
Texas Instruments
📦 28-pin TSSOP
Multichannel RS-232 line driver/receiver · 3 V to 5.5 V · 500 kbps · 3 channels · 5 channels · 3.3 V · plus or minus 15 kV IEC ESD protection · -40°C to +85°C

Consulte o preço

Ver ficha técnica →

MAX3243EIPWRG4 Especificações

Product Type Multichannel RS-232 line driver/receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 500 kbps
Receiver Hysteresis 500 mV
ESD Protection ±15 kV IEC ESD
Interface Standard RS-232
Channel Architecture Multichannel full-duplex transceiver
Encapsulamento 28-pin TSSOP
Package Width 4.40 mm
Package Length 0.173 inch
Tipo de montagem Surface mount
Packaging Tape and reel
Temperature Grade Industrial
Number of Terminals 28

Guia de Configuração de Pinos do MAX3243EIPWRG4 0.173 inch

Configuração de pinos para MAX3243EIPWRG4 (pacote 0.173 inch). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 0.173 inch para MAX3243EIPWRG4

Nenhum dado detalhado de pinagem disponível para MAX3243EIPWRG4.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MAX3243EIPWRG4 é adequado para 6 aplicaçãos: Industrial Control Serial Interface, Data Acquisition Equipment, Test and Measurement Instruments, Point-of-Sale Terminal, Security and Access Equipment, Embedded Serial Port Expansion.

🏭

Industrial Control Serial Interface

The MAX3243EIPWRG4 fits industrial controllers that require several RS-232 ports for configuration computers, test heads, service interfaces, or external equipment. Its 3-to-5.5-V supply range supports both 3.3 V and 5 V control platforms, while the 500-kbps rate exceeds the throughput of many legacy peripheral ports. The 500 mV receiver hysteresis helps reject disturbances on board-level cables, and ±15 kV IEC ESD protection strengthens the connector-facing interface. Place the IC near the protected connectors to minimize unprotected trace length, while keeping ground returns continuous and bypassing the supply locally.

🔧

Data Acquisition Equipment

The MAX3243EIPWRG4 is useful in data-acquisition and instrumentation systems that exchange commands and results over RS-232 links. The 500-kbps maximum data rate supports efficient transfer of configuration data and measurement records, while multichannel integration reduces the number of separate transceiver packages required. Its 3 V minimum operating voltage allows use in mixed-voltage embedded systems, and the 500 mV receiver hysteresis improves noise immunity. Designers should preserve a low-resistance return path between connected equipment and use the manufacturer pin and capacitor guidance when implementing the charge-pump and supply network.

🔧

Test and Measurement Instruments

The MAX3243EIPWRG4 can provide legacy RS-232 connectivity in test and measurement instruments operated by a host computer or service technician. Its 500-kbps capability supports higher-volume commands and data than a slow serial console, while the 28-pin TSSOP package simplifies assembly in compact instruments. The receiver's 500 mV hysteresis is advantageous when the connection includes bench adapters or longer cables. To maximize robustness, locate the transceiver close to the external connector, use the specified bypass and charge-pump capacitor values, and protect the enclosure entry point according to the system ESD architecture.

📱

Point-of-Sale Terminal

The MAX3243EIPWRG4 supports compact point-of-sale equipment that must retain RS-232 connections for scales, printers, customer displays, or service tools. Its multichannel design allows several peripheral links to share one package, reducing board area in space-constrained terminals. Operation from 3 to 5.5 V suits both 3.3 V embedded controllers and 5 V accessory-powered systems. The ±15 kV IEC ESD rating is particularly relevant around user-accessible connectors, although it does not replace a chassis-grounding strategy. Keep signal routes short, separate from noisy power-converter paths, and provide a reliable return conductor to the connected peripheral.

📥

Security and Access Equipment

The MAX3243EIPWRG4 is suitable for access-control panels, cameras, and security peripherals that expose an RS-232 configuration or diagnostic port. The enhanced ±15 kV IEC ESD protection adds interface robustness where cables may be connected by installers or service personnel, and the 500 mV receiver hysteresis helps reject noise on longer wiring runs. The 500-kbps rate supports firmware downloads, configuration exchanges, and diagnostic commands. Install the device near the external connector, provide solid ground references, and consider additional surge or cable protection when the interface leaves the controlled enclosure or connects to long unshielded cabling.

🖥️

Embedded Serial Port Expansion

The MAX3243EIPWRG4 allows a modern embedded controller to add legacy RS-232 ports when its native UART lacks the required number of channels or logic levels. The 3-to-5.5-V range accommodates common embedded rails, and the 500-kbps rate covers many legacy control protocols without requiring a separate high-speed transceiver. Multichannel integration simplifies software support around several UART resources while keeping the implementation in one 28-pin TSSOP device. Validate the host-side logic thresholds, use the datasheet-recommended charge-pump capacitors, and route each protected line directly toward its connector.

What is the operating voltage of MAX3243EIPWRG4?
The MAX3243EIPWRG4 operates from 3 V to 5.5 V. According to the Texas Instruments MAX3243E product page, the device is a 3-to-5.5-V multichannel RS-232 line driver and receiver, allowing it to interface with 3.3 V and 5 V system rails. Designers should still verify the power-consumption and output-level requirements for every RS-232 channel in the target design.
What is the maximum data rate of MAX3243EIPWRG4?
The MAX3243EIPWRG4 supports a maximum data rate of 500 kbps. Texas Instruments identifies the device as a multichannel 500-kbps RS-232 line driver/receiver. This rate supports higher-speed embedded and industrial serial links, while the actual usable baud rate also depends on cable length, loading, signal integrity, grounding, and the performance of the connected endpoint.
Where can I download the MAX3243EIPWRG4 datasheet PDF?
The official MAX3243E datasheet and ordering information are available through the Texas Instruments MAX3243E product page at https://www.ti.com/product/MAX3243E. The linked MAX3243EIPWRG4 ordering code identifies the industrial-temperature, 28-pin TSSOP configuration. Use the manufacturer document for the authoritative pin description, recommended operating conditions, electrical characteristics, and ESD ratings before finalizing a PCB design.
Where can I find the MAX3243EIPWRG4 pinout?
The MAX3243EIPWRG4 pin assignment is shown in the manufacturer MAX3243E datasheet associated with the Texas Instruments product page. The exact ordering code uses a 28-pin TSSOP package, and the pinout must be assigned from the package drawing and pin-description table rather than inferred from another MAX3243 variant. Review driver outputs, receiver inputs, supply pins, ground pins, and charge-pump capacitor connections before routing the board.
What ESD protection does MAX3243EIPWRG4 provide?
The MAX3243EIPWRG4 provides ±15 kV IEC ESD protection according to the Texas Instruments product-page description. This rating applies to the specified RS-232 interface pins and the conditions defined by the manufacturer datasheet. It improves robustness against electrostatic discharge, but it does not replace proper connector design, chassis grounding, cable management, or system-level surge protection.
What is the receiver hysteresis of MAX3243EIPWRG4?
The MAX3243EIPWRG4 has 500 mV of receiver hysteresis. The Texas Instruments device description identifies this hysteresis as a receiver characteristic that establishes a transition band between recognized logic levels. The wider band helps reject noise around the threshold, improving reliability on cables or internal wiring where small voltage disturbances may otherwise cause false transitions.
Is MAX3243EIPWRG4 suitable for industrial applications?
The MAX3243EIPWRG4 is identified as an industrial-temperature RS-232 transceiver in a surface-mount 28-pin TSSOP package. Its 3-to-5.5-V operating range, 500-kbps data rate, 500 mV receiver hysteresis, and ±15 kV IEC ESD protection make it appropriate for many industrial serial interfaces. Final qualification also depends on the manufacturer's temperature limits and the surrounding enclosure, power supply, and EMC environment.
What can replace the MAX3243EIPWRG4?
The closest same-package replacement identified is the MAX3243IPWRG4, which retains the 28-pin TSSOP format but is the version without the MAX3243E enhanced IEC ESD rating. Other same-brand MAX3243 options may use related 28-pin TSSOP orderings, but their suffix, protection rating, temperature grade, and exact pin configuration must be checked. This page lists only parts that can be evaluated on the same footprint.
Is MAX3243EIPWRG4 the same as MAX3243IPWRG4?
No. MAX3243EIPWRG4 and MAX3243IPWRG4 are related 28-pin TSSOP RS-232 transceivers, but the E suffix identifies the enhanced IEC ESD-protection version. The MAX3243EIPWRG4 is described as having ±15 kV IEC ESD protection, whereas the MAX3243IPWRG4 listing does not carry that enhanced designation. Confirm the complete datasheet and production requirements before treating them as interchangeable.
When should I choose MAX3243EIPWRG4 over MAX3243IPWRG4?
Choose MAX3243EIPWRG4 when the RS-232 connector or cable interface requires the enhanced ±15 kV IEC ESD protection offered by the MAX3243E version. Choose MAX3243IPWRG4 when its non-enhanced protection is acceptable and the project requires that specific ordering configuration. Both use the 28-pin TSSOP format, but ESD rating, lifecycle status, sourcing, and exact ordering suffix must still be reviewed.
Is MAX3243EIPWRG4 suitable for a 3.3 V embedded system?
Yes, the MAX3243EIPWRG4 is suitable for a 3.3 V system because its specified supply range begins at 3 V and extends to 5.5 V. The device also supports RS-232 data rates up to 500 kbps and provides 500 mV receiver hysteresis. The host-side logic interface must still be checked for voltage compatibility, and the complete datasheet should be used to validate timing and supply requirements.
Where to buy MAX3243EIPWRG4 online?
Use the Request a Quote form on this XAIPART page to request MAX3243EIPWRG4 availability, pricing, and lead time. The form allows buyers to submit the exact MPN and required quantity without relying on stale catalog prices. Confirm the 28-pin TSSOP suffix, industrial temperature grade, tape-and-reel packaging, and current lifecycle status when placing the order.
What is the price of MAX3243EIPWRG4?
The current unit price and quantity pricing for MAX3243EIPWRG4 are handled through the Request a Quote form on this page. Request the quantity you need, including multiples of the manufacturer tape-and-reel shipment quantity. The quote process also helps confirm current stock, lead time, and whether any alternate authorized supply is available.
What is the lead time for MAX3243EIPWRG4?
Request the current lead time for MAX3243EIPWRG4 through the Request a Quote form on this page. Lead time can vary with order quantity, inventory, and the exact manufacturer suffix, so confirm the full 28-pin TSSOP ordering code with the supplier. Requesting quantity, reel packaging, and target delivery date together enables a more useful manufacturing response.
Is MAX3243EIPWRG4 in stock?
Current stock for MAX3243EIPWRG4 is confirmed through the Request a Quote form on this XAIPART page. Submit the exact MPN and required quantity to receive current availability and lead-time information. Because inventory can change rapidly, avoid treating a generic catalog listing as a stock guarantee for this specific ordering code.
What are the key specifications of MAX3243EIPWRG4 that engineers should know?
The key specifications are a 3-to-5.5-V supply range, 500-kbps operation, 500 mV receiver hysteresis, ±15 kV IEC ESD protection, and a 28-pin TSSOP package. Texas Instruments describes the part as a multichannel RS-232 line driver/receiver, and the device is supplied on tape and reel. These characteristics determine supply compatibility, serial throughput, noise tolerance, electrostatic robustness, and PCB footprint.

Dados de referência de engenharia para MAX3243EIPWRG4 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the MAX3243EIPWRG4 when the design needs multiple RS-232 channels, operation from a 3.3 V or 5 V rail, a maximum data rate of 500 kbps, and enhanced ±15 kV IEC ESD protection at connector-facing pins. Its 500 mV receiver hysteresis is useful for noisy or longer cable connections. Consider MAX3243IPWRG4 when the same 28-pin TSSOP interface is needed but the enhanced IEC ESD designation is not required; its protection rating must be checked against the system threat level. MAX3243IPWR offers another related non-E ordering in the same package, but production, packing, and environmental requirements need separate confirmation. MAX3243EIPW retains the enhanced protection family and package format, but it is a different ordering suffix. For every option, verify the manufacturer pinout, lifecycle status, temperature grade, charge-pump capacitor arrangement, and exact customer ordering code before PCB release.

Comparação com alternativas

Parâmetro Este produto MAX3243IPWRG4 MAX3243IPWR MAX3243EIPW
Package 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Product Type Multichannel RS-232 line driver/receiver RS-232 line driver/receiver RS-232 line driver/receiver RS-232 line driver/receiver
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 500 kbps 500 kbps 500 kbps 500 kbps
Receiver Hysteresis 500 mV 500 mV 500 mV 500 mV
Mounting Type Surface mount Surface mount Surface mount Surface mount

Principais diferenciais

  • Enhanced IEC ESD protection (vs MAX3243IPWRG4)
  • Wide 3.3 V compatibility (vs MAX3243IPWR)
  • Multichannel integration in a compact package (vs MAX3243EIPW)
  • 500 mV receiver hysteresis (vs MAX3243IPWRG4)

Notas de projeto

Place the MAX3243EIPWRG4 close to the external RS-232 connector so that the exposed driver and receiver traces remain short. Follow the manufacturer pin-description table when assigning charge-pump, supply, and ground pins. Keep switching-regulator and digital-clock routes away from the connector-facing nets, and provide a continuous ground reference for every cable. A short interface path limits susceptibility to radiated noise and improves the effectiveness of the device's ESD protection.

Use the manufacturer-specified charge-pump capacitor values and place them directly across the designated capacitor pins with short, symmetrical traces. Add the recommended local supply bypass capacitance at the device's supply pins and maintain low-impedance ground returns. Because the device can operate from either 3.3 V or 5 V rails, confirm that the selected bypass network and external interface components are rated for the actual system voltage and the MAX3243E operating conditions.

Treat each RS-232 channel as a routed transmission line rather than a general-purpose logic net. Minimize stub lengths, avoid right-angle routing where practical, and keep driver outputs and receiver inputs away from unrelated high-current paths. Maintain the receiver's noise margin by using the specified 500 mV hysteresis and suitable cable return arrangements. Verify operation with an oscilloscope at the connector because the target data rate, cable length, and grounding topology jointly determine signal integrity.

Do not assume that any MAX3243 suffix is interchangeable solely because the package drawing matches. The E suffix denotes the enhanced IEC ESD-protection family, while other suffixes may differ in production status, packing, temperature grade, or protection. Validate the complete ordering code, pin description, lifecycle status, and ESD requirements against the manufacturer datasheet. Also avoid confusing the 3-to-5.5-V supply range with the RS-232 signal levels, which remain bipolar.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The MAX3243E product-page description states ±15 kV IEC ESD protection, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification status is shown in the cited product information. IEC ESD protection is an electrical robustness specification rather than a materials-compliance declaration.

Buscas relacionadas

MAX3243EIPWRG4 datasheet MAX3243EIPWRG4 pinout MAX3243EIPWRG4 datasheet pdf MAX3243EIPWRG4 equivalent MAX3243EIPWRG4 replacement MAX3243EIPWRG4 cross reference MAX3243EIPWRG4 vs MAX3243IPWRG4 MAX3243EIPWRG4 footprint Texas Instruments MAX3243EIPWRG4 MAX3243EIPWRG4 RS-232 transceiver MAX3243EIPWRG4 28-TSSOP MAX3243EIPWRG4 industrial control MAX3243EIPWRG4 price MAX3243EIPWRG4 stock where to buy MAX3243EIPWRG4

Componentes & termos relacionados

Texas Instruments MAX3243EIPWRG4 MAX3243IPWRG4 MAX3243IPWR MAX3243EIPW RS-232 RS-232 transceiver line driver line receiver multichannel transceiver interface IC semiconductor 3.3 V logic 500 kbps 500 mV receiver hysteresis ±15 kV IEC ESD protection 28-pin TSSOP TSSOP package family surface mount industrial control data acquisition test and measurement charge-pump capacitors electrostatic discharge
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ