MAX3243EIPWRG4 - 3 to 5.5V 500kbps RS-232 Transceiver | Texas Instruments
MPN: MAX3243EIPWRG4 ✓ Hoạt độngMAX3243EIPWRG4 Tóm tắt
An RS-232 transceiver is an interface IC that combines voltage-conversion driver and receiver functions for the RS-232 standard. RS-232 uses single-ended, bipolar signaling in which the logic state at a host or peripheral is translated into a voltage suitable for transmission over a cable. The MAX3243EIPWRG4 belongs to the broader interface-IC hierarchy, combining communication line-driver and line-receiver functions into a surface-mount mixed-signal device.
Key features include a 3 to 5.5 V supply range, operation up to 500 kbps, multichannel driver and receiver support, and ±15 kV IEC ESD protection. The 500 kbps capability makes the device useful for moderately high-speed serial links while retaining compatibility with lower-speed RS-232 equipment. Its 500 mV receiver hysteresis provides a defined transition region and improves tolerance of noise present on the receiver input.
The MAX3243E architecture is intended for portable and embedded systems where low supply voltage, compactness, and robust serial-interface protection are important. A single device can support several RS-232 channels while reducing the number of separate driver and receiver packages required on the PCB. This integration can simplify routing and conserve board area, although each connected port still requires appropriate signal-line and return-path consideration.
Typical applications include industrial control systems, test and measurement equipment, data-acquisition units, point-of-sale terminals, security equipment, and embedded serial-port controllers. The 28-pin TSSOP package is compatible with automated surface-mount assembly, while the 3 V minimum supply allows operation in systems that cannot support a traditional 5 V-only RS-232 interface without level translation.
During layout, place the device close to the connector and preserve short, direct paths for each driver and receiver signal. Keep the RS-232 traces away from sensitive analog and high-speed digital nets, and connect the protection and bypass paths using the manufacturer datasheet pin-assignment guidance. Verify the complete pinout and recommended capacitor values before releasing the PCB.
This page organizes the key electrical characteristics, package details, application guidance, design notes, and qualified same-package replacement options for engineers evaluating the MAX3243EIPWRG4. It is intended to support design selection and PCB planning without relying on a generic distributor specification summary.
Bộ thay thế dễ dàng lắp đặt cho MAX3243EIPWRG4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX3243EIPWRG4 (cùng hình factor và footprint) — khác nhau ở ESD Protection, Maximum Data Rate, Operating Temperature Range, Package.
MAX3243IPWRG4
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3243IPWRDL
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3243EIPW
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3243EIPWRG4 Thông số kỹ thuật
| Product Type | Multichannel RS-232 line driver/receiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 500 kbps |
| Receiver Hysteresis | 500 mV |
| ESD Protection | ±15 kV IEC ESD |
| Interface Standard | RS-232 |
| Channel Architecture | Multichannel full-duplex transceiver |
| Hộp | 28-pin TSSOP |
| Package Width | 4.40 mm |
| Package Length | 0.173 inch |
| Kiểu lắp đặt | Surface mount |
| Packaging | Tape and reel |
| Temperature Grade | Industrial |
| Number of Terminals | 28 |
Hướng dẫn cấu hình chân MAX3243EIPWRG4 0.173 inch
Cấu hình chân cho MAX3243EIPWRG4 (0.173 inch gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho MAX3243EIPWRG4.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MAX3243EIPWRG4 phù hợp cho 6 Áp dụngs: Industrial Control Serial Interface, Data Acquisition Equipment, Test and Measurement Instruments, Point-of-Sale Terminal, Security and Access Equipment, Embedded Serial Port Expansion.
Industrial Control Serial Interface
The MAX3243EIPWRG4 fits industrial controllers that require several RS-232 ports for configuration computers, test heads, service interfaces, or external equipment. Its 3-to-5.5-V supply range supports both 3.3 V and 5 V control platforms, while the 500-kbps rate exceeds the throughput of many legacy peripheral ports. The 500 mV receiver hysteresis helps reject disturbances on board-level cables, and ±15 kV IEC ESD protection strengthens the connector-facing interface. Place the IC near the protected connectors to minimize unprotected trace length, while keeping ground returns continuous and bypassing the supply locally.
Được đề xuất
Data Acquisition Equipment
The MAX3243EIPWRG4 is useful in data-acquisition and instrumentation systems that exchange commands and results over RS-232 links. The 500-kbps maximum data rate supports efficient transfer of configuration data and measurement records, while multichannel integration reduces the number of separate transceiver packages required. Its 3 V minimum operating voltage allows use in mixed-voltage embedded systems, and the 500 mV receiver hysteresis improves noise immunity. Designers should preserve a low-resistance return path between connected equipment and use the manufacturer pin and capacitor guidance when implementing the charge-pump and supply network.
Được đề xuất
Test and Measurement Instruments
The MAX3243EIPWRG4 can provide legacy RS-232 connectivity in test and measurement instruments operated by a host computer or service technician. Its 500-kbps capability supports higher-volume commands and data than a slow serial console, while the 28-pin TSSOP package simplifies assembly in compact instruments. The receiver's 500 mV hysteresis is advantageous when the connection includes bench adapters or longer cables. To maximize robustness, locate the transceiver close to the external connector, use the specified bypass and charge-pump capacitor values, and protect the enclosure entry point according to the system ESD architecture.
Được đề xuất
Point-of-Sale Terminal
The MAX3243EIPWRG4 supports compact point-of-sale equipment that must retain RS-232 connections for scales, printers, customer displays, or service tools. Its multichannel design allows several peripheral links to share one package, reducing board area in space-constrained terminals. Operation from 3 to 5.5 V suits both 3.3 V embedded controllers and 5 V accessory-powered systems. The ±15 kV IEC ESD rating is particularly relevant around user-accessible connectors, although it does not replace a chassis-grounding strategy. Keep signal routes short, separate from noisy power-converter paths, and provide a reliable return conductor to the connected peripheral.
Được đề xuất
Security and Access Equipment
The MAX3243EIPWRG4 is suitable for access-control panels, cameras, and security peripherals that expose an RS-232 configuration or diagnostic port. The enhanced ±15 kV IEC ESD protection adds interface robustness where cables may be connected by installers or service personnel, and the 500 mV receiver hysteresis helps reject noise on longer wiring runs. The 500-kbps rate supports firmware downloads, configuration exchanges, and diagnostic commands. Install the device near the external connector, provide solid ground references, and consider additional surge or cable protection when the interface leaves the controlled enclosure or connects to long unshielded cabling.
Được đề xuất
Embedded Serial Port Expansion
The MAX3243EIPWRG4 allows a modern embedded controller to add legacy RS-232 ports when its native UART lacks the required number of channels or logic levels. The 3-to-5.5-V range accommodates common embedded rails, and the 500-kbps rate covers many legacy control protocols without requiring a separate high-speed transceiver. Multichannel integration simplifies software support around several UART resources while keeping the implementation in one 28-pin TSSOP device. Validate the host-side logic thresholds, use the datasheet-recommended charge-pump capacitors, and route each protected line directly toward its connector.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX3243EIPWRG4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX3243IPWRG4 | MAX3243IPWR | MAX3243EIPW |
|---|---|---|---|---|
| Package | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | Multichannel RS-232 line driver/receiver | RS-232 line driver/receiver | RS-232 line driver/receiver | RS-232 line driver/receiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 500 kbps | 500 kbps | 500 kbps | 500 kbps |
| Receiver Hysteresis | 500 mV | 500 mV | 500 mV | 500 mV |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount |
Bảo phân biệt quan trọng
- Enhanced IEC ESD protection (vsMAX3243IPWRG4)
- Wide 3.3 V compatibility (vsMAX3243IPWR)
- Multichannel integration in a compact package (vsMAX3243EIPW)
- 500 mV receiver hysteresis (vsMAX3243IPWRG4)
Ghi chú thiết kế
Place the MAX3243EIPWRG4 close to the external RS-232 connector so that the exposed driver and receiver traces remain short. Follow the manufacturer pin-description table when assigning charge-pump, supply, and ground pins. Keep switching-regulator and digital-clock routes away from the connector-facing nets, and provide a continuous ground reference for every cable. A short interface path limits susceptibility to radiated noise and improves the effectiveness of the device's ESD protection.
Use the manufacturer-specified charge-pump capacitor values and place them directly across the designated capacitor pins with short, symmetrical traces. Add the recommended local supply bypass capacitance at the device's supply pins and maintain low-impedance ground returns. Because the device can operate from either 3.3 V or 5 V rails, confirm that the selected bypass network and external interface components are rated for the actual system voltage and the MAX3243E operating conditions.
Treat each RS-232 channel as a routed transmission line rather than a general-purpose logic net. Minimize stub lengths, avoid right-angle routing where practical, and keep driver outputs and receiver inputs away from unrelated high-current paths. Maintain the receiver's noise margin by using the specified 500 mV hysteresis and suitable cable return arrangements. Verify operation with an oscilloscope at the connector because the target data rate, cable length, and grounding topology jointly determine signal integrity.
Do not assume that any MAX3243 suffix is interchangeable solely because the package drawing matches. The E suffix denotes the enhanced IEC ESD-protection family, while other suffixes may differ in production status, packing, temperature grade, or protection. Validate the complete ordering code, pin description, lifecycle status, and ESD requirements against the manufacturer datasheet. Also avoid confusing the 3-to-5.5-V supply range with the RS-232 signal levels, which remain bipolar.
Thông tin tuân thủ
The MAX3243E product-page description states ±15 kV IEC ESD protection, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification status is shown in the cited product information. IEC ESD protection is an electrical robustness specification rather than a materials-compliance declaration.