Analog Devices

MAX3380ECUP+T - 2Tx/2Rx RS-232 Transceiver | Analog Devices

N.º da peça: MAX3380ECUP+T ✓ Ativo
+2.35 V to +5.5 V Vdss 20-pin TSSOP Package
MOQ: 1 |

MAX3380ECUP+T Visão geral

The Analog Devices MAX3380ECUP+T is a 2-transmitter, 2-receiver RS-232 transceiver designed for +2.35 V to +5.5 V operation, with a 20-pin TSSOP package and enhanced electrostatic-discharge protection on both logic and RS-232 pins. It supports EIA/TIA-232 and V.28/V.24 communication interfaces while operating from a 1.65 V logic reference where required.

An RS-232 transceiver is an interface IC that converts between single-ended TTL/CMOS logic signals and differential bipolar RS-232 signals. It belongs to the interface-IC hierarchy, connecting UART, UART-compatible controllers, microcontrollers, and industrial peripherals to physical communication links. Transceivers combine driver and receiver functions in one package, reducing board area and simplifying bidirectional serial-port implementations.

The MAX3380ECUP+T provides two transmit channels and two receive channels, allowing two serial ports to share one device. Its +2.35 V to +5.5 V supply range accommodates modern 3.3 V and 5 V systems, while the VL pin provides logic-level interoperability in mixed-voltage environments down to 1.65 V. The manufacturer describes enhanced ESD protection on the TTL and RS-232 sides, with the distributor listing identifying 15 kV ESD protection on I/O and logic pins.

The device combines low-power operation with high data-rate capability, making it suitable for compact communications equipment. Its integrated charge-pump circuitry supports RS-232 signal generation without a separate external DC-DC converter. Logic input and output levels are referenced to VL, allowing the interface thresholds to track a compatible mixed-logic supply rather than being tied to one fixed rail.

Typical uses include industrial serial controllers, point-of-sale equipment, test and measurement instruments, medical-device consoles, security systems, and other embedded systems that exchange data over RS-232. A system can connect two UART channels to the MAX3380ECUP+T while providing shared ground wiring, proper signal polarity, and compliant cable termination.

PCB layout should keep RS-232 traces away from clocks, switching supplies, and high-speed digital nets. Confirm logic thresholds against the connected UART voltage, observe the manufacturer’s charge-pump capacitor requirements, and provide the specified supply and bypass capacitance close to the device pins.

This page combines the manufacturer interface description, package and ordering information, drop-in alternatives, comparison parameters, and practical PCB guidance to support faster component selection and implementation.

Alternativas drop-in para MAX3380ECUP+T — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MAX3380ECUP+T (mesmo formato e footprint) — diferindo em Supply Voltage Range.

Analog Devices
Supply Voltage Range: +2.35V to +5.5V
Comparar com MAX3380ECUP+T →

MAX3380EEUP+T

✅ Drop-In
Analog Devices
📦 20-pin TSSOP
RS-232 transceiver · 2 transmitters · 2 receivers · +2.35V to +5.5V · 460 kbps · Down to +1.65V · ±15 kV on I/O and logic pins · EIA/TIA-232 and V.28/V.24

Consulte o preço

Ver ficha técnica →

MAX3380ECUP-T

✅ Drop-In
📦 20-pin TSSOP
0-pin and 0-channel differences; ordering suffix changes from +T to -T

📋 Alternativa de referência (fora do catálogo)

MAX3380ECUP+T Especificações

Supply Voltage Range +2.35 V to +5.5 V
Transmitter Channels 2 channels
Receiver Channels 2 channels
Interface Standard EIA/TIA-232 and V.28/V.24
ESD Protection on I/O and Logic Pins ±15 kV
Minimum VL Logic Reference 1.65 V
Logic Input and Output Reference VL pin
Encapsulamento 20-pin TSSOP
Tipo de montagem Surface mount

Guia de Configuração de Pinos do MAX3380ECUP+T 20-pin tssop

Configuração de pinos para MAX3380ECUP+T (pacote 20-pin tssop). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 20-pin tssop para MAX3380ECUP+T

Nenhum dado detalhado de pinagem disponível para MAX3380ECUP+T.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MAX3380ECUP+T é adequado para 6 aplicaçãos: Industrial Serial Controllers, Point-of-Sale Terminals, Medical Device Consoles, Test and Measurement Instruments, Security and Access Systems, Embedded Communication Modules.

🏭

Industrial Serial Controllers

The MAX3380ECUP+T fits industrial serial controllers that need two RS-232 ports while conserving board area. Its 2Tx/2Rx architecture consolidates four interface functions into one 20-pin TSSOP package, and the +2.35 V to +5.5 V supply range accommodates common embedded supply rails. The VL-referenced logic side can operate down to a 1.65 V reference in mixed-voltage systems. According to the Analog Devices MAX3380E description, enhanced ESD protection is provided on both TTL and RS-232 sides, an advantage when the controller connects to equipment-mounted cables. The main design consideration is ensuring that each transmitter output and receiver input has the correct enable and signal assignment for the intended UART topology.

🖥️

Point-of-Sale Terminals

The MAX3380ECUP+T is useful in point-of-sale terminals that connect a main processor and a peripheral through RS-232. Two transmitters and two receivers allow the design to support more than one serial function without adding separate line-driver packages. The 20-pin TSSOP footprint keeps the solution compact, while operation from +2.35 V to +5.5 V supports both 3.3 V and 5 V system architectures. The manufacturer identifies the MAX3380E family as low-power, high-data-rate interface ICs with enhanced ESD protection. In a retail terminal, the VL reference should match the processor’s logic level, and RS-232 traces should remain separated from switching-regulator and display-driver circuitry to reduce coupled noise.

💊

Medical Device Consoles

The MAX3380ECUP+T can support service and diagnostic ports in compact medical-device consoles where two RS-232 links must coexist with dense digital circuitry. Its +2.35 V to +5.5 V operating range allows use beside modern low-voltage processors, and the VL pin lets logic thresholds follow a compatible mixed-logic rail down to 1.65 V. Enhanced protection on the logic and RS-232 sides supports robust cable-connected equipment. Designers should still keep external cables away from high-energy switching nodes, use the manufacturer-required charge-pump and bypass capacitors, and verify that the selected MAX3380E ordering variant meets the product’s electrical and qualification requirements before release.

🔧

Test and Measurement Instruments

The MAX3380ECUP+T is appropriate for test and measurement instruments that offer legacy RS-232 control or communication ports alongside modern USB or network interfaces. Its two transmitters and two receivers provide flexibility for two UART channels in a 20-pin TSSOP package, while the 1.65 V VL capability supports mixed logic thresholds. The manufacturer describes the family as combining low power, high data rates, and enhanced ESD protection on both sides of the interface. For bench equipment, place the transceiver close to the connector and protection network, keep the RS-232 return path continuous, and separate the interface from precision analog sections to minimize switching and cable-transient effects.

🎥

Security and Access Systems

The MAX3380ECUP+T can serve as the RS-232 interface in access-control terminals, alarm panels, and camera-control equipment that requires more than one legacy serial connection. The 2Tx/2Rx arrangement in one 20-pin package reduces component count, and the +2.35 V to +5.5 V supply range supports embedded power systems. The VL-referenced logic inputs and outputs allow the interface to coexist with lower-voltage controller logic down to a 1.65 V reference. According to the Analog Devices product page, enhanced ESD protection is available on both TTL and RS-232 connections, which is useful for equipment connected to longer external cables. The enclosure and cable routing still require suitable surge and grounding controls beyond the IC’s on-board ESD protection.

🌐

Embedded Communication Modules

The MAX3380ECUP+T fits embedded communication modules that expose legacy RS-232 ports for configuration, diagnostics, or field-service connections. Its small 20-pin TSSOP package supports dense controller boards, and its 2Tx/2Rx configuration can serve two independent serial ports or paired communication paths. Operation from +2.35 V to +5.5 V allows deployment with common embedded rails, while the VL input provides flexibility in mixed-logic systems down to 1.65 V. The MAX3380E family’s enhanced ESD protection on logic and RS-232 pins improves interface resilience. PCB implementation should follow the manufacturer’s charge-pump capacitor recommendations, provide local VCC bypassing, and avoid routing RS-232 nets beneath or parallel with high-current switching paths.

What are the key specifications of MAX3380ECUP+T that engineers should know?
The MAX3380ECUP+T is a 2-transmitter, 2-receiver RS-232 interface IC operating from +2.35 V to +5.5 V in a 20-pin TSSOP package. According to the Analog Devices MAX3380E product page, it supports EIA/TIA-232 and V.28/V.24 interfaces, provides enhanced ESD protection on both logic and RS-232 sides, and accepts mixed-logic operation down to a 1.65 V VL reference. It is intended for compact systems requiring multiple UART-to-RS-232 channels without external RS-232 line-driver circuitry.
What is the operating voltage of MAX3380ECUP+T?
The MAX3380ECUP+T operates from +2.35 V to +5.5 V, allowing use with 3.3 V and 5 V systems. According to the Analog Devices MAX3380E product description, both logic and RS-232-side protection are enhanced, and the VL pin can reference logic operation down to 1.65 V. The supply range and VL reference perform different functions: VCC powers the transceiver, while VL establishes the thresholds for its logic-side inputs and outputs.
How many RS-232 channels does MAX3380ECUP+T provide?
The MAX3380ECUP+T provides two transmitters and two receivers in one 20-pin TSSOP package. The DigiKey component listing identifies it as a 2/2 full RS-232 transceiver, while the Analog Devices family page describes the MAX3380E family as containing two receivers and two transmitters. This arrangement supports two UART links when each receiver is paired with its corresponding transmitter, subject to the manufacturer’s channel and enable assignments.
Where can I download the MAX3380ECUP+T datasheet PDF?
The MAX3380ECUP+T datasheet and product resources are available through the Analog Devices MAX3380E product page at https://www.analog.com/en/products/max3380e.html. Use the document link on that page to obtain the manufacturer PDF. The page describes the family’s +2.35 V to +5.5 V supply range, EIA/TIA-232 and V.28/V.24 support, low-power operation, high data-rate capability, VL logic referencing, and enhanced ESD protection.
Where can I find the MAX3380ECUP+T pinout?
The MAX3380ECUP+T pin assignment is documented in the MAX3380E family documentation linked from the Analog Devices product page. The package is a 20-pin TSSOP, and engineers should use the pin-description table to identify VCC, ground, VL, receiver outputs, logic inputs, transmitter inputs, and RS-232 line terminals. Do not infer connections from the MAX3381E pinout, because related family members can use their enable pins differently.
Is MAX3380ECUP+T suitable for mixed 1.65 V and 3.3 V logic systems?
Yes, the MAX3380ECUP+T can support mixed-logic operation when VL is connected to the appropriate logic reference. According to the Analog Devices MAX3380E description, both input and output logic levels are referenced to VL, and operation is possible down to +1.65 V. The host UART and connected logic devices should still satisfy the device’s input thresholds and output-level requirements, while VCC must remain within the +2.35 V to +5.5 V supply range.
What can replace MAX3380ECUP+T on the same PCB?
MAX3380EEUP+T is a documented drop-in candidate in the same 20-pin TSSOP package, and MAX3380ECUP-T is another closely related ordering option listed as completely replaceable in cross-reference results. The MAX3380EEUP+T provides the same 2-transmitter, 2-receiver arrangement and +2.35 V to +5.5 V supply class, but its ordering suffix identifies a different ESD-protection variant. Confirm the complete manufacturer datasheet and your production requirements before substitution.
Is MAX3380EEUP+T the same as MAX3380ECUP+T?
MAX3380EEUP+T is a close drop-in alternative with the same 20-pin TSSOP footprint and 2Tx/2Rx RS-232 architecture. Cross-reference information identifies it as a complete replacement with consistent terminals, packages, and principal performance characteristics. The ordering suffix changes from C to E, which can denote a different ESD-protection implementation, so engineers should compare the final electrical limits and qualification requirements in the manufacturer documentation before approving the substitution.
What is the best cross-brand equivalent for MAX3380ECUP+T?
No cross-brand drop-in equivalent is established for MAX3380ECUP+T in the manufacturer and cross-reference information used for this page. A replacement must use the identical 20-pin TSSOP footprint, preserve the 2Tx/2Rx channel arrangement, operate from +2.35 V to +5.5 V, maintain the VL-referenced logic interface, and satisfy the applicable RS-232 and ESD requirements. Similar RS-232 devices with different enable or shutdown arrangements should not be treated as drop-in parts without a full pin and timing review.
MAX3380ECUP+T vs MAX3380EEUP+T - which is better for industrial RS-232 equipment?
MAX3380ECUP+T and MAX3380EEUP+T both use a 20-pin TSSOP package and provide a 2Tx/2Rx interface for compact RS-232 equipment. Cross-reference data identifies MAX3380EEUP+T as completely replaceable because its terminals and principal performance characteristics are consistent. The meaningful selection point is the C-versus-E ordering suffix and its associated ESD implementation. Select the version explicitly listed for the product’s required protection level and environmental qualification rather than relying on the package name alone.
When should I choose MAX3380ECUP+T instead of MAX3380EEUP+T?
Choose MAX3380ECUP+T when its documented ESD-protection configuration and ordering code match the product’s interface requirements and qualified BOM. Choose MAX3380EEUP+T when its manufacturer documentation provides the preferred protection variant while preserving the same 20-pin TSSOP footprint and principal operating characteristics. Because both devices occupy the same board outline, the decision should be based on final ESD ratings, operating limits, lifecycle requirements, and traceability rather than physical PCB differences.
Is MAX3380ECUP+T suitable for industrial equipment with two UART ports?
The MAX3380ECUP+T is well suited to compact dual-UART RS-232 equipment because it combines two transmitters and two receivers in one 20-pin TSSOP package. Its +2.35 V to +5.5 V supply range supports common industrial logic systems, while VL allows logic thresholds to be referenced down to 1.65 V. According to the Analog Devices product page, enhanced ESD protection is provided on both the TTL and RS-232 sides, supporting equipment exposed to electrically noisy environments.
What is the lead time for MAX3380ECUP+T?
The current lead time for MAX3380ECUP+T should be requested through the Request a Quote form on this page. The manufacturer family page confirms that MAX3380E is an RS-232 interface family, while the distributor results identify the exact ordered device but do not establish a fixed production lead time. When requesting a quotation, state the required quantity, date code, packaging requirement, and whether the complete order must use one date-code lot.
Is MAX3380ECUP+T in stock?
Current inventory for MAX3380ECUP+T should be confirmed through the Request a Quote form on this page. The product is listed by several component channels, but a listing alone does not guarantee that inventory is held for the exact +T ordering code. Provide the required quantity and delivery target with the request, and specify whether partial quantities, mixed date codes, or scheduled replenishment are acceptable for the receiving schedule.
Where to buy MAX3380ECUP+T online?
Use the Request a Quote form on this page to request MAX3380ECUP+T availability, commercial terms, and current delivery information for the exact +T ordering code. The device is an Analog Devices MAX3380E-family 2Tx/2Rx RS-232 transceiver in a 20-pin TSSOP package. Including the target quantity, date-code preference, and shipment destination in the request enables the purchasing team to confirm the most appropriate supply option without relying on a generic family listing.

Dados de referência de engenharia para MAX3380ECUP+T — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose MAX3380ECUP+T when the design needs two RS-232 transmitters, two receivers, a +2.35 V to +5.5 V supply, and the documented ESD-protected C ordering configuration. Its 20-pin TSSOP package consolidates two complete UART-facing channels, while VL supports logic thresholds referenced down to 1.65 V. MAX3380EEUP+T is a practical drop-in candidate when its E ordering variant matches the required ESD characteristics and production specification. MAX3380ECUP-T is another same-package ordering option, but its suffix and associated conditions should be checked before procurement. No cross-brand part is recommended without a verified 20-pin pinout, equivalent channel assignments, compatible VL behavior, and confirmed protection requirements. For all three Maxim options, validate charge-pump capacitors, bypass placement, cable protection, and emission performance in the finished PCB.

Comparação com alternativas

Parâmetro Este produto MAX3380EEUP+T MAX3380ECUP-T
Package 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP
Brand Analog Devices Maxim Integrated Maxim Integrated

Principais diferenciais

  • Combines two transmitters and two receivers in one compact interface package (vs MAX3380EEUP+T)
  • Supports a 1.65 V mixed-logic reference through the VL pin (vs MAX3380ECUP-T)
  • Uses a +2.35 V to +5.5 V supply range for embedded 3.3 V and 5 V systems (vs MAX3380EEUP+T)
  • Provides enhanced ESD protection on both logic and RS-232 sides (vs MAX3380ECUP-T)

Notas de projeto

Follow the MAX3380E application circuit for VCC, VL, charge-pump, and bypass-capacitor placement. Keep the charge-pump capacitors and local supply bypass close to their associated pins to limit switching noise and unstable biasing. Route the RS-232 side toward the connector without sharing narrow trace segments with clocks, memory buses, or power-converter switching nodes. Continuous ground return paths are important because the RS-232 interface uses single-ended signaling referenced to the system ground.

Do not treat VCC and VL as interchangeable. VCC supplies the transceiver from +2.35 V to +5.5 V, while VL sets the reference for logic-side input and output levels and may operate down to 1.65 V. Confirm the connected UART’s thresholds before assigning VL. Also verify that the selected MAX3380E ordering suffix provides the required ESD implementation; package identity alone does not prove that every electrical protection detail is identical.

Keep RS-232 traces physically separated from sensitive analog inputs and high-speed digital nets, especially when an external cable can inject transients. The integrated ESD protection helps protect the pins but does not replace connector-level design, chassis grounding, or cable shielding. Use a solid ground reference, avoid long parallel runs with power or switching signals, and evaluate the complete board with the intended external cables attached.

The MAX3380E family generates RS-232 voltage using internal charge-pump circuitry, so correct capacitor selection and placement directly affect radiated and conducted emissions. Use the capacitance and dielectric requirements specified by the manufacturer, and avoid substituting high-ESR or electrically noisy capacitor types without validation. Keep the charge-pump loop compact and provide a quiet ground reference so switching energy is not coupled into analog or communication circuitry.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The family comparison search mentions RoHS and REACH information, but no explicit status for MAX3380ECUP+T is provided. No AEC-Q100, lead-free, halogen-free, or conflict-minerals qualification is established.

Dados verificados em: 2026-11-09 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MAX3380ECUP+T datasheet MAX3380ECUP+T pinout MAX3380ECUP+T datasheet pdf MAX3380ECUP+T equivalent MAX3380ECUP+T replacement MAX3380ECUP+T cross reference MAX3380ECUP+T vs MAX3380EEUP+T MAX3380ECUP+T 20-TSSOP MAX3380ECUP+T RS-232 transceiver MAX3380ECUP+T application circuit MAX3380ECUP+T price MAX3380ECUP+T stock Analog Devices MAX3380ECUP+T MAX3380ECUP+T 15kV ESD

Componentes & termos relacionados

Analog Devices MAX3380ECUP+T MAX3380ECUP+ MAX3380EEUP+T MAX3380ECUP-T MAX3380E RS-232 transceiver RS-232 interface IC EIA/TIA-232 V.28/V.24 interface UART 2Tx/2Rx TSSOP-20 TSSOP package family surface-mount package electrostatic discharge protection mixed-logic interface VL pin charge-pump circuitry logic-side inputs and outputs industrial communication equipment point-of-sale terminals test and measurement instruments EIA/TIA-232
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ