MAX3380ECUP+T - 2Tx/2Rx RS-232 Transceiver | Analog Devices
MPN: MAX3380ECUP+T ✓ نشطMAX3380ECUP+T نظرة عامة
An RS-232 transceiver is an interface IC that converts between single-ended TTL/CMOS logic signals and differential bipolar RS-232 signals. It belongs to the interface-IC hierarchy, connecting UART, UART-compatible controllers, microcontrollers, and industrial peripherals to physical communication links. Transceivers combine driver and receiver functions in one package, reducing board area and simplifying bidirectional serial-port implementations.
The MAX3380ECUP+T provides two transmit channels and two receive channels, allowing two serial ports to share one device. Its +2.35 V to +5.5 V supply range accommodates modern 3.3 V and 5 V systems, while the VL pin provides logic-level interoperability in mixed-voltage environments down to 1.65 V. The manufacturer describes enhanced ESD protection on the TTL and RS-232 sides, with the distributor listing identifying 15 kV ESD protection on I/O and logic pins.
The device combines low-power operation with high data-rate capability, making it suitable for compact communications equipment. Its integrated charge-pump circuitry supports RS-232 signal generation without a separate external DC-DC converter. Logic input and output levels are referenced to VL, allowing the interface thresholds to track a compatible mixed-logic supply rather than being tied to one fixed rail.
Typical uses include industrial serial controllers, point-of-sale equipment, test and measurement instruments, medical-device consoles, security systems, and other embedded systems that exchange data over RS-232. A system can connect two UART channels to the MAX3380ECUP+T while providing shared ground wiring, proper signal polarity, and compliant cable termination.
PCB layout should keep RS-232 traces away from clocks, switching supplies, and high-speed digital nets. Confirm logic thresholds against the connected UART voltage, observe the manufacturer’s charge-pump capacitor requirements, and provide the specified supply and bypass capacitance close to the device pins.
This page combines the manufacturer interface description, package and ordering information, drop-in alternatives, comparison parameters, and practical PCB guidance to support faster component selection and implementation.
بدائل مباشرة لـ MAX3380ECUP+T — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع MAX3380ECUP+T (نفس عامل الشكل والبصمة) — يختلف في Supply Voltage Range.
MAX3380EEUP+T
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←MAX3380ECUP-T
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
MAX3380ECUP+T المواصفات
| Supply Voltage Range | +2.35 V to +5.5 V |
| Transmitter Channels | 2 channels |
| Receiver Channels | 2 channels |
| Interface Standard | EIA/TIA-232 and V.28/V.24 |
| ESD Protection on I/O and Logic Pins | ±15 kV |
| Minimum VL Logic Reference | 1.65 V |
| Logic Input and Output Reference | VL pin |
| العلبة | 20-pin TSSOP |
| نوع التركيب | Surface mount |
دليل تكوين أطراف MAX3380ECUP+T 20-pin tssop
تكوين الأطراف لـ MAX3380ECUP+T (حزمة 20-pin tssop). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MAX3380ECUP+T.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MAX3380ECUP+T مناسب لـ 6 التطبيقs: Industrial Serial Controllers, Point-of-Sale Terminals, Medical Device Consoles, Test and Measurement Instruments, Security and Access Systems, Embedded Communication Modules.
Industrial Serial Controllers
The MAX3380ECUP+T fits industrial serial controllers that need two RS-232 ports while conserving board area. Its 2Tx/2Rx architecture consolidates four interface functions into one 20-pin TSSOP package, and the +2.35 V to +5.5 V supply range accommodates common embedded supply rails. The VL-referenced logic side can operate down to a 1.65 V reference in mixed-voltage systems. According to the Analog Devices MAX3380E description, enhanced ESD protection is provided on both TTL and RS-232 sides, an advantage when the controller connects to equipment-mounted cables. The main design consideration is ensuring that each transmitter output and receiver input has the correct enable and signal assignment for the intended UART topology.
موصى به
Point-of-Sale Terminals
The MAX3380ECUP+T is useful in point-of-sale terminals that connect a main processor and a peripheral through RS-232. Two transmitters and two receivers allow the design to support more than one serial function without adding separate line-driver packages. The 20-pin TSSOP footprint keeps the solution compact, while operation from +2.35 V to +5.5 V supports both 3.3 V and 5 V system architectures. The manufacturer identifies the MAX3380E family as low-power, high-data-rate interface ICs with enhanced ESD protection. In a retail terminal, the VL reference should match the processor’s logic level, and RS-232 traces should remain separated from switching-regulator and display-driver circuitry to reduce coupled noise.
موصى به
Medical Device Consoles
The MAX3380ECUP+T can support service and diagnostic ports in compact medical-device consoles where two RS-232 links must coexist with dense digital circuitry. Its +2.35 V to +5.5 V operating range allows use beside modern low-voltage processors, and the VL pin lets logic thresholds follow a compatible mixed-logic rail down to 1.65 V. Enhanced protection on the logic and RS-232 sides supports robust cable-connected equipment. Designers should still keep external cables away from high-energy switching nodes, use the manufacturer-required charge-pump and bypass capacitors, and verify that the selected MAX3380E ordering variant meets the product’s electrical and qualification requirements before release.
موصى به
Test and Measurement Instruments
The MAX3380ECUP+T is appropriate for test and measurement instruments that offer legacy RS-232 control or communication ports alongside modern USB or network interfaces. Its two transmitters and two receivers provide flexibility for two UART channels in a 20-pin TSSOP package, while the 1.65 V VL capability supports mixed logic thresholds. The manufacturer describes the family as combining low power, high data rates, and enhanced ESD protection on both sides of the interface. For bench equipment, place the transceiver close to the connector and protection network, keep the RS-232 return path continuous, and separate the interface from precision analog sections to minimize switching and cable-transient effects.
موصى به
Security and Access Systems
The MAX3380ECUP+T can serve as the RS-232 interface in access-control terminals, alarm panels, and camera-control equipment that requires more than one legacy serial connection. The 2Tx/2Rx arrangement in one 20-pin package reduces component count, and the +2.35 V to +5.5 V supply range supports embedded power systems. The VL-referenced logic inputs and outputs allow the interface to coexist with lower-voltage controller logic down to a 1.65 V reference. According to the Analog Devices product page, enhanced ESD protection is available on both TTL and RS-232 connections, which is useful for equipment connected to longer external cables. The enclosure and cable routing still require suitable surge and grounding controls beyond the IC’s on-board ESD protection.
موصى به
Embedded Communication Modules
The MAX3380ECUP+T fits embedded communication modules that expose legacy RS-232 ports for configuration, diagnostics, or field-service connections. Its small 20-pin TSSOP package supports dense controller boards, and its 2Tx/2Rx configuration can serve two independent serial ports or paired communication paths. Operation from +2.35 V to +5.5 V allows deployment with common embedded rails, while the VL input provides flexibility in mixed-logic systems down to 1.65 V. The MAX3380E family’s enhanced ESD protection on logic and RS-232 pins improves interface resilience. PCB implementation should follow the manufacturer’s charge-pump capacitor recommendations, provide local VCC bypassing, and avoid routing RS-232 nets beneath or parallel with high-current switching paths.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ MAX3380ECUP+T — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | MAX3380EEUP+T | MAX3380ECUP-T |
|---|---|---|---|
| Package | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP |
| Brand | Analog Devices | Maxim Integrated | Maxim Integrated |
أبرز الفروقات
- Combines two transmitters and two receivers in one compact interface package (مقابلMAX3380EEUP+T)
- Supports a 1.65 V mixed-logic reference through the VL pin (مقابلMAX3380ECUP-T)
- Uses a +2.35 V to +5.5 V supply range for embedded 3.3 V and 5 V systems (مقابلMAX3380EEUP+T)
- Provides enhanced ESD protection on both logic and RS-232 sides (مقابلMAX3380ECUP-T)
ملاحظات التصميم
Follow the MAX3380E application circuit for VCC, VL, charge-pump, and bypass-capacitor placement. Keep the charge-pump capacitors and local supply bypass close to their associated pins to limit switching noise and unstable biasing. Route the RS-232 side toward the connector without sharing narrow trace segments with clocks, memory buses, or power-converter switching nodes. Continuous ground return paths are important because the RS-232 interface uses single-ended signaling referenced to the system ground.
Do not treat VCC and VL as interchangeable. VCC supplies the transceiver from +2.35 V to +5.5 V, while VL sets the reference for logic-side input and output levels and may operate down to 1.65 V. Confirm the connected UART’s thresholds before assigning VL. Also verify that the selected MAX3380E ordering suffix provides the required ESD implementation; package identity alone does not prove that every electrical protection detail is identical.
Keep RS-232 traces physically separated from sensitive analog inputs and high-speed digital nets, especially when an external cable can inject transients. The integrated ESD protection helps protect the pins but does not replace connector-level design, chassis grounding, or cable shielding. Use a solid ground reference, avoid long parallel runs with power or switching signals, and evaluate the complete board with the intended external cables attached.
The MAX3380E family generates RS-232 voltage using internal charge-pump circuitry, so correct capacitor selection and placement directly affect radiated and conducted emissions. Use the capacitance and dielectric requirements specified by the manufacturer, and avoid substituting high-ESR or electrically noisy capacitor types without validation. Keep the charge-pump loop compact and provide a quiet ground reference so switching energy is not coupled into analog or communication circuitry.
معلومات الامتثال
The family comparison search mentions RoHS and REACH information, but no explicit status for MAX3380ECUP+T is provided. No AEC-Q100, lead-free, halogen-free, or conflict-minerals qualification is established.