Analog Devices

MAX3485AEASA+T - 20Mbps RS-485/RS-422 Transceiver | Analog Devices

N.º da peça: MAX3485AEASA+T ✓ Ativo
3 V to 3.6 V Vdss RS-485 and RS-422 Rds(on) 8-pin SOIC Package
MOQ: 1 |

MAX3485AEASA+T Visão geral

Analog Devices MAX3485AEASA+T is a 3.3V half-duplex RS-485/RS-422 transceiver with one driver and one receiver, a 20Mbps maximum data rate, slew-rate-limited signaling, and ±20kV ESD protection in an 8-pin SOIC package. The MAX3485AEASA+T suffix identifies the Analog Devices/Maxim Integrated automotive-grade, tape-and-reel ordering variant.

An RS-485/RS-422 transceiver is a physical-layer interface IC that converts between digital logic signals and balanced differential signals. It belongs to the transceiver hierarchy within interface ICs and supports bidirectional communication over cables that may run through electrically noisy industrial environments. Balanced signaling improves noise immunity by receiving the difference between two conductors rather than relying on a single-ended voltage.

The device operates from a nominal 3.3V supply, with the manufacturer listing a 3V to 3.6V operating range. Its 20Mbps data rate supports factory automation, industrial control networks, telecommunications equipment, and EMI-sensitive data links. The slew-rate-limited driver reduces high-frequency switching energy, while ±20kV ESD protection strengthens the interface against electrostatic discharge encountered during installation or connection of external cabling.

Each MAX3485AE device integrates one half-duplex driver and one receiver. A shared communication path requires controlled direction switching between transmit and receive states, allowing the same pair of conductors to carry data in both directions. The analog product family also includes related MAX3483AE, MAX3488AE, and MAX3490AE devices in the same 8-pin SO package, enabling family-level design comparison when a different bus implementation or feature set is required.

Typical uses include industrial-control networks, telecommunications links, instrumentation, building controls, and embedded systems that communicate with remote nodes over balanced cable. The combination of 3.3V operation, 20Mbps signaling, slew-rate limiting, and high ESD protection makes the device suitable for low-voltage controller boards that require robust differential communications without a high-power interface solution.

The primary design considerations are bus termination, fail-safe biasing, transceiver enable timing, and ground handling. Place the interface close to the connector, provide a continuous return path, and evaluate common-mode voltage and cable length against the circuit operating limits. Do not substitute a 5V-only transceiver unless its supply range and electrical parameters are confirmed for the complete system.

This product page consolidates the manufacturer’s electrical characteristics, package information, family comparisons, and practical interface guidance into an engineering-oriented reference. It also distinguishes direct device options from broader RS-485 alternatives and highlights where existing PCB footprints require electrical verification before substitution.

Alternativas drop-in para MAX3485AEASA+T — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MAX3485AEASA+T (mesmo formato e footprint) — diferindo em Maximum Data Rate, Transceiver Configuration, Package, Supported Standards, ESD Protection.

Analog Devices
Transceiver Configuration: 1/1 half-duplex transceiver
Supported Standards: RS-422 and RS-485
Comparar com MAX3485AEASA+T →
Analog Devices
Maximum Data Rate: 20 Mbps
Package: 8-pin SOIC
Supported Standards: RS-485 and RS-422
Comparar com MAX3485AEASA+T →
Analog Devices
Maximum Data Rate: 12 Mbps
Transceiver Configuration: 1 transmitter and 1 receiver
Package: 8-SOIC
Comparar com MAX3485AEASA+T →
Analog Devices
Maximum Data Rate: 10 Mbps
Package: 8-SOIC
Supported Standards: RS-422 and RS-485
Comparar com MAX3485AEASA+T →
MaxLinear
Maximum Data Rate: 10 Mbps

MAX3483AEASA+T

✅ Drop-In
Analog Devices
📦 8-pin SOIC
3.3 V · 20 Mbps · ±20 kV · RS-485 and RS-422 · 1 driver · 1 receiver · Differential, slew-rate limited · Differential

Consulte o preço

Ver ficha técnica →

MAX3485ESA+T

✅ Drop-In ⚠️ Especificações não verificadas
Analog Devices
📦 8-pin SOIC
RS-485/RS-422 transceiver · 3.3 V · 10 Mbps · 1 · 1 · Half-duplex · RS-422 and RS-485 · 8-SOIC

Consulte o preço

Ver ficha técnica →

SP3485EN-L/TR

✅ Drop-In
MaxLinear
📦 8-pin SOIC
RS-422/RS-485 half-duplex transceiver · 3.3 V · 10 Mbps · 1 driver · 1 receiver · Half-duplex · RS-422 and RS-485 · BiCMOS

Consulte o preço

Ver ficha técnica →

XR3078XID-F

✅ Drop-In
📦 8-pin SOIC
Identified as a functional equivalent and pin-compatible MAX3485AEASA+T alternative; approximately 80% overall parameter proximity.

📋 Alternativa de referência (fora do catálogo)

SN75HVD3082E

✅ Drop-In
📦 8-pin SOIC
Cross-brand 3.3V half-duplex RS-485 class with an 8-pin SO footprint; approximately 80% overall parameter proximity.

📋 Alternativa de referência (fora do catálogo)

SN65HVD485E

✅ Drop-In
📦 8-pin SOIC
Cross-brand 3.3V half-duplex RS-485 class with an 8-pin SO footprint; approximately 80% overall parameter proximity.

📋 Alternativa de referência (fora do catálogo)

PCA82C250

✅ Drop-In
📦 8-pin SOIC
Cross-brand half-duplex RS-485 interface in an 8-pin SO package; approximately 70% overall parameter proximity.

📋 Alternativa de referência (fora do catálogo)

ST3485E

✅ Drop-In
📦 8-pin SOIC
Cross-brand half-duplex RS-485 interface in an 8-pin SO package; approximately 70% overall parameter proximity.

📋 Alternativa de referência (fora do catálogo)

MAX3485AEASA+T Especificações

Product Type RS-485/RS-422 transceiver
Transceiver Configuration 1 driver / 1 receiver
Communication Mode Half duplex
Supported Standards RS-485 and RS-422
Supply Voltage Range 3 V to 3.6 V
Nominal Supply Voltage 3.3 V
Maximum Data Rate 20 Mbps
ESD Protection ±20 kV
Driver Edge Rate Slew-rate limited
Encapsulamento 8-pin SOIC
Tipo de montagem Surface mount
Ordering Package Tape and reel
Automotive Qualification Automotive-grade MAX3485AE variant

Guia de Configuração de Pinos do MAX3485AEASA+T tape and reel

Configuração de pinos para MAX3485AEASA+T (pacote tape and reel). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote tape and reel para MAX3485AEASA+T

Nenhum dado detalhado de pinagem disponível para MAX3485AEASA+T.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MAX3485AEASA+T é adequado para 6 aplicaçãos: Industrial Control Networks, Telecommunications Equipment, EMI-Sensitive Industrial Links, Building Automation Networks, Instrumentation and Test Systems, Embedded Serial-Bus Bridges.

🏭

Industrial Control Networks

The MAX3485AEASA+T fits industrial controllers that exchange commands and status over balanced RS-485 networks. Its 20Mbps maximum data rate supports high-speed polling, while ±20kV ESD protection improves interface resilience when the board connects to field wiring. The slew-rate-limited driver also reduces unwanted high-frequency energy on the bus. Install the transceiver near the connector, use a continuous ground reference, and validate the network’s cable length, topology, termination, and common-mode limits against the application requirements.

🌐

Telecommunications Equipment

The MAX3485AEASA+T is appropriate for telecommunications equipment that needs a compact 3.3V balanced interface for supervisory, backplane, or remote-unit links. Its 20Mbps capability provides substantial link-rate headroom, while slew-rate limiting supports cleaner operation in electromagnetic environments. Keep the differential route short and controlled, provide adequate return-path continuity, and account for transceiver enable timing. Because equipment-rack interfaces may impose stricter common-mode and isolation requirements, confirm those system-level conditions before approving the connection.

🔧

EMI-Sensitive Industrial Links

The MAX3485AEASA+T suits EMI-sensitive systems where a differential bus must remain reliable around motors, contactors, relays, and switching power converters. Differential reception rejects a large portion of common-mode noise, and the ±20kV ESD rating improves protection for exposed communications wiring. The 3.3V operation also simplifies integration with modern controller logic. For best results, maintain a low-impedance ground relationship, avoid long stubs, use appropriate bus termination, and verify the achieved cable length with the manufacturer’s interface guidance.

🧩

Building Automation Networks

The MAX3485AEASA+T can connect building controllers, sensors, and remote modules over a low-voltage RS-485 network. Its 3V-to-3.6V operating range suits 3.3V embedded controllers, while the 20Mbps rate limit allows the bus to serve both routine status traffic and faster configuration exchanges. The half-duplex architecture requires disciplined bus-direction control, so the firmware must avoid simultaneous transmission from multiple nodes. Confirm termination, fail-safe biasing, cable topology, and electrostatic requirements for each installation environment.

📺

Instrumentation and Test Systems

The MAX3485AEASA+T is useful in laboratory and industrial instrumentation that must exchange measurements and commands with remote fixtures over a balanced link. Its 20Mbps data-rate capability allows rapid command-response operation, and the 8-pin SOIC package keeps the interface compact. Slew-rate limiting can improve signal quality across practical cable lengths, although actual reach depends on topology, cable characteristics, termination, and data rate. Evaluate grounding and common-mode behavior at every external connector, especially where instruments share grounds with high-power equipment.

🖥️

Embedded Serial-Bus Bridges

The MAX3485AEASA+T can provide the physical layer for a microcontroller or programmable-logic controller bridging UART traffic onto an RS-485 or RS-422 network. Its 3.3V supply aligns with many embedded processors, while the 20Mbps maximum rate exceeds the needs of many control networks. The interface consumes one driver and one receiver, so the host must manage direction and receiver enable state correctly. Add protocol-appropriate timeout handling, fail-safe biasing, ESD-aware connector design, and controlled bus arbitration to prevent unintended bus contention.

Resumo dos produtos recomendados

MAX3483AEASA+T Analog Devices Usado em: Industrial Control Networks, Instrumentation and Test Systems MAX3485ESA+T Analog Devices Usado em: Industrial Control Networks, Embedded Serial-Bus Bridges SP3485EN-L/TR MaxLinear Usado em: Telecommunications Equipment, Instrumentation and Test Systems XR3078XID-F Functional equivalent RS-485 interface option Usado em: Telecommunications Equipment SN75HVD3082E 3.3V half-duplex RS-485 interface alternative Usado em: EMI-Sensitive Industrial Links SN65HVD485E 3.3V half-duplex RS-485 interface alternative Usado em: EMI-Sensitive Industrial Links, Embedded Serial-Bus Bridges PCA82C250 Half-duplex RS-485 transceiver alternative Usado em: Building Automation Networks ST3485E Half-duplex RS-485 transceiver alternative Usado em: Building Automation Networks
What is the MAX3485AEASA+T?
The MAX3485AEASA+T is a 3.3V, half-duplex RS-485/RS-422 interface transceiver with one driver and one receiver. According to the Analog Devices MAX3485AE product page, it supports data rates up to 20Mbps, uses slew-rate-limited signaling, and provides ±20kV ESD protection in an 8-pin SOIC package. It is intended for industrial and telecommunications equipment requiring balanced differential communications.
What are the key specifications of MAX3485AEASA+T?
The MAX3485AEASA+T combines a 3.3V supply, a 20Mbps maximum data rate, ±20kV ESD protection, and slew-rate-limited output in an 8-pin SOIC. Analog Devices identifies the device as a one-driver, one-receiver, half-duplex transceiver for RS-485 and RS-422 links. The MAX3485AE family also includes related MAX3483AE, MAX3488AE, and MAX3490AE devices for design comparison.
Where can I download the MAX3485AEASA+T datasheet?
The official MAX3485AE datasheet and product information are available from the Analog Devices product page at https://www.analog.com/en/products/max3485ae.html. The page provides the manufacturer’s data-sheet link for electrical characteristics, pin descriptions, dimensions, ordering information, and application details. Use the manufacturer document for final schematic, layout, and qualification decisions.
Where can I find the MAX3485AEASA+T pinout?
Use the pin-description table and package drawing in the Analog Devices MAX3485AE data sheet to identify the MAX3485AEASA+T connections. The device is offered in an 8-pin SOIC package and includes differential bus, driver-control, receiver-control, supply, and ground functions. Verify signal names against the selected device variant before assigning PCB nets or making cross-reference substitutions.
What is the operating voltage of MAX3485AEASA+T?
The MAX3485AEASA+T operates from 3V to 3.6V and is intended for a nominal 3.3V supply. The Analog Devices MAX3485AE family description identifies the devices as 3.3V transceivers, while the product listing states the 3V-to-3.6V range. Confirm the selected transceiver’s supply limits, enable thresholds, and logic compatibility in the manufacturer data sheet.
Where to buy MAX3485AEASA+T online?
Use the Request a Quote form on this page to request MAX3485AEASA+T availability, order quantity, and current commercial terms. The device is offered in an 8-pin SOIC tape-and-reel ordering configuration. A written quotation allows the requested quantity, date code, and traceable sourcing requirements to be reviewed before placing an order.
What is the price of MAX3485AEASA+T?
Use the Request a Quote form on this page for the current MAX3485AEASA+T quotation. Commercial terms can vary with quantity, packaging, date code, delivery schedule, and traceability requirements, so a single static price may not reflect the order configuration. Submit the required quantity and any lot-control requirements for a project-specific response.
What is the lead time for MAX3485AEASA+T?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time can depend on the ordered quantity, plant and distribution availability, date code, and production schedule. The manufacturer lists the MAX3485AE family as production devices, but manufacturing status alone does not guarantee a specific delivery date.
Is MAX3485AEASA+T in stock?
Stock status for MAX3485AEASA+T should be confirmed through the Request a Quote form on this page using the required quantity and date-code preference. The part is listed by industrial distributors as an orderable 8-SOIC transceiver, but live inventory changes by location and fulfillment center. Submit the order details for a current availability response.
What can replace MAX3485AEASA+T?
The MAX3483AEASA+T is a close same-manufacturer option because it is a MAX3485AE-family RS-485/RS-422 transceiver offered in the same 8-pin SO format. Pin-compatible alternatives also include SP3485EN-L/TR and the identified XR3078XID-F functional equivalent. Electrical qualification should still confirm supply range, data rate, ESD rating, enable polarity, fail-safe behavior, and automotive requirements.
Is MAX3485AEASA+T the same as MAX3483AEASA+T?
No. Both devices are 8-pin RS-485/RS-422 transceivers in the MAX3485AE product family, but they are different orderable MPNs with distinct internal feature sets and matching guidance. The Analog Devices MAX3485AE family page groups the MAX3483AE and MAX3485AE, while the EngineerZone comparison identifies them as separate devices. Review the pin descriptions and electrical tables before substitution.
What is the best Texas Instruments equivalent for MAX3485AEASA+T?
The SN75HVD3082E and SN65HVD485E are identified as RS-485 alternatives to the MAX3485AEASA+T. They are not automatically interchangeable because the exact SOIC footprint, supply range, data rate, ESD rating, receiver fail-safe behavior, and enable logic must match the installed circuit. Use the Request a Quote form for sourcing and validate the manufacturer data sheets before release.
When should I choose MAX3485AEASA+T over MAX3483AEASA+T?
Choose the MAX3485AEASA+T when the design requires the MAX3485AE feature set, including its 20Mbps maximum data rate, ±20kV ESD protection, and slew-rate-limited driver. The MAX3483AEASA+T is preferable when its documented characteristics satisfy the interface and it offers a better overall fit. Compare pin behavior, supply range, receiver topology, and automotive qualification rather than relying only on package similarity.
Is MAX3485AEASA+T suitable for industrial control networks?
Yes. The MAX3485AEASA+T is specifically associated with industrial-control networks and provides a 20Mbps rate limit, ±20kV ESD protection, and slew-rate-limited operation for EMI-sensitive balanced links. Suitability still depends on cable length, topology, termination, grounding, common-mode range, and isolation requirements. Validate those network conditions against the application circuit.
How much thermal and power design is required for MAX3485AEASA+T?
The MAX3485AEASA+T is an interface transceiver whose normal dissipation is primarily associated with its 3.3V supply current and driver activity. Because no package thermal resistance or detailed dissipation figure is stated on the product page, calculate worst-case supply and bus-load dissipation using the manufacturer’s electrical limits. Check ambient temperature, copper area, airflow, and neighboring heat sources during thermal review.
Does MAX3485AEASA+T meet RoHS and AEC-Q100 requirements?
The MAX3485AEASA+T is an automotive-grade ordering variant within the MAX3485AE family, but the exact RoHS, REACH, and AEC-Q100 status must be confirmed from the current manufacturer product documentation or declaration. The family page identifies automotive applications and production availability without supplying all compliance declarations. Treat compliance as a qualification requirement rather than inferring it solely from the ordering code.

Dados de referência de engenharia para MAX3485AEASA+T — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the MAX3485AEASA+T when a compact 3.3V half-duplex interface must combine RS-485 and RS-422 operation, up to 20Mbps signaling, slew-rate-limited output, and ±20kV ESD protection in an 8-pin SOIC footprint. Select MAX3483AEASA+T when its electrical characteristics better match the design, especially if its receiver or driver behavior offers a useful functional difference within the same MAX3485AE family. MAX3485ESA+T is a same-family alternative for designs that do not require the automotive ordering variant. For cross-brand options, SP3485EN-L/TR and XR3078XID-F are identified as pin-compatible or functionally equivalent candidates, while SN75HVD3082E, SN65HVD485E, PCA82C250, and ST3485E can serve similar RS-485 designs. Before replacement, verify supply voltage, maximum data rate, ESD rating, fail-safe behavior, enable logic, common-mode range, bus impedance, and automotive qualification. Package similarity alone does not establish drop-in electrical compatibility.

Comparação com alternativas

Parâmetro Este produto MAX3483AEASA+T SP3485EN-L/TR SN75HVD3082E PCA82C250 ST3485E
Brand Analog Devices Analog Devices Maxim Integrated Texas Instruments NXP Semiconductors STMicroelectronics
Package 8-pin SOIC 8-pin SOIC - same package 8-pin SOIC - same package 8-pin SOIC - same package 8-pin SOIC - same package 8-pin SOIC - same package
Interface Standards RS-485 and RS-422 RS-485 and RS-422 RS-485 RS-485 RS-485 RS-485

Principais diferenciais

  • 20Mbps maximum data rate with controlled edge rate (vs PCA82C250)
  • High connector-level ESD protection (vs SN75HVD3082E)
  • Supports both RS-485 and RS-422 in one interface (vs SN65HVD485E)

Notas de projeto

Place the MAX3485AEASA+T close to the external connector and route the RS-485/RS-422 differential pair as a tightly coupled, continuous pair. Keep the path away from switching nodes, high-current conductors, and antenna-like structures. Use a solid ground reference beneath or adjacent to the interface where practical, and minimize stub branches because excessive stubs can reflect signals and reduce effective bus reliability at higher data rates.

Treat the half-duplex bus as a shared resource: only one node should transmit at a time. Implement transmitter-enable delays, collision avoidance, bus-timeout release, and fail-safe biasing so an idle or unpowered node does not corrupt communication. Do not assume that matching the SOIC footprint proves compatibility; verify enable polarity, receiver enable behavior, supply range, common-mode limits, and bus-impedance characteristics before approving a substitute.

The slew-rate-limited driver can reduce unwanted high-frequency energy, but EMI performance still depends on the complete installation. Use the recommended bus termination only as dictated by the network topology, retain symmetrical differential routing, and keep cable connections short or properly shielded. At equipment boundaries, verify that the transceiver’s ±20kV ESD capability is appropriate for the connector exposure and that any external protection does not distort the intended data rate or differential impedance.

Operate the device only within its 3V-to-3.6V supply range, and place local supply decoupling close to the supply and ground pins. Because the manufacturer’s product page does not state the package thermal resistance or complete maximum dissipation figure, calculate worst-case power from the selected operating mode and review ambient temperature and copper area. Avoid excessive auxiliary loading on interface pins, since their voltage and current limits can differ from the bus-driver ratings.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The MAX3485AEASA+T is an automotive-grade ordering variant within the MAX3485AE family. The manufacturer product information identifies the family as production, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the cited excerpts.

Buscas relacionadas

MAX3485AEASA+T datasheet MAX3485AEASA+T pinout MAX3485AEASA+T datasheet pdf MAX3485AEASA+T equivalent MAX3485AEASA+T replacement MAX3485AEASA+T cross reference MAX3485AEASA+T vs MAX3483AEASA+T MAX3485AEASA+T price MAX3485AEASA+T stock Analog Devices MAX3485AEASA+T MAX3485AEASA+T 8 SOIC MAX3485AEASA+T 20Mbps transceiver MAX3485AEASA+T industrial control MAX3485AEASA+T RS-422 application What can replace MAX3485AEASA+T

Componentes & termos relacionados

Analog Devices MAX3485AEASA+T MAX3485AE MAX3483AEASA+T MAX3485ESA+T SP3485EN-L/TR XR3078XID-F SN75HVD3082E SN65HVD485E PCA82C250 ST3485E RS-485 RS-422 half-duplex transceiver differential line driver differential line receiver interface IC semiconductor 8-pin SOIC SOIC package family surface-mount package 3.3V transceiver 20Mbps data rate slew-rate limiting ESD protection industrial control network telecommunications equipment EMI-sensitive interface common-mode voltage fail-safe biasing
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ