onsemi

MC14541BDT - 3 MHz Programmable Timer | onsemi | Clock & Timing

N.º da peça: MC14541BDT ✓ Ativo
18 V Vdss 14-pin small-outline package Package 3 MHz Speed
MOQ: 1 |

MC14541BDT Visão geral

The onsemi MC14541BDT is a programmable timer integrated circuit built around a 16-stage binary counter, an integrated oscillator, automatic power-on reset, and output-control logic. It operates to a maximum clock frequency of 3 MHz, supports supply voltages up to 18 V, and is specified over a -55 °C to +125 °C temperature range. The device is associated with a 14-pin small-outline package and is supplied in tape-and-reel form with the T ordering suffix.

A programmable timer is a clock-and-timing IC that divides an input frequency into a selectable output interval. In the MC14541B family, the oscillator can use an external capacitor and two resistors, while the counter provides the time-base division. This arrangement permits a compact implementation of periodic timing, delayed events, or repetitive switching without requiring a microcontroller. In the system hierarchy, it is a timer and counter within clock and timing integrated circuits, which are semiconductor devices used to establish, divide, and distribute time-based signals.

The core feature of the MC14541BDT is the combination of an integrated 16-stage binary counter and an external-RC oscillator. The counter architecture provides programmable division of the oscillator frequency, and the automatic power-on-reset function initializes timing when power is applied. Output-control logic allows the resulting timing signal to be observed or routed to the next stage of a system. The 3 MHz maximum clock frequency supports substantially higher timing rates than low-frequency RC-only systems while retaining simple external analog timing components.

The MC14541B family is designed for applications that need repeated timing without the overhead of a digital processor. Typical uses include industrial control intervals, delayed relay activation, pump or motor duty-cycle timing, periodic sampling triggers, oscillator replacement, and embedded timing sequences. Its 18 V maximum supply voltage is useful in industrial equipment where the timer must tolerate higher control-system rail voltages, while the -55 °C to +125 °C rated range supports demanding environmental environments.

Timing accuracy depends on the tolerance and temperature coefficient of the external oscillator capacitor and resistors, as well as supply and temperature stability. Component selection should therefore include worst-case tolerance rather than nominal values alone. The power-on-reset behavior establishes a defined initial count state, but it does not replace a reset function for timing an event that begins at an arbitrary point in the operating cycle.

For PCB implementation, place the oscillator capacitor and timing resistors close to their associated device pins to minimize parasitic capacitance and susceptibility to EMI. Keep the oscillator loop compact and away from high-current switching nodes. The datasheet pin-description and connection diagrams should be used when assigning tracks, because the available catalog summary does not enumerate every signal name for this exact ordering code.

This page combines the verified manufacturer function description, catalog electrical limits, package information, application guidance, and qualification checks into an engineering-focused view of the MC14541BDT. It also distinguishes true same-footprint replacements from related family members whose package, temperature grade, or ordering code differs.

Alternativas drop-in para MC14541BDT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Nenhuma alternativa drop-in disponível para este produto.

Solicitar alternativas

MC14541BDT Especificações

Product Type Programmable timer IC
Frequência máxima de clock 3 MHz
Counter Architecture 16-stage binary counter
Oscillator Type Integrated oscillator with external capacitor and two resistors
Maximum Supply Voltage 18 V
Faixa de temperatura de operação -55 °C to +125 °C
Power-On Reset Automatic
Output Control Logic Integrated
Encapsulamento 14-pin small-outline package
Terminal Pitch 0.65 mm
Tipo de montagem Surface mount
Order Code Suffix T

Guia de Configuração de Pinos do MC14541BDT 14-pin small-outline package

Configuração de pinos para MC14541BDT (pacote 14-pin small-outline package). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 14-pin small-outline package para MC14541BDT

Nenhum dado detalhado de pinagem disponível para MC14541BDT.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MC14541BDT é adequado para 6 aplicaçãos: Industrial Control Timing, Motor and Pump Duty-Cycle Control, Periodic Sampling Trigger, Delay and Retriggerable Event Control, Appliance and Consumer Timing, Oscillator and Clock Signal Processing.

🏭

Industrial Control Timing

The MC14541BDT is useful for control panels that require a repeatable interval without dedicating a microcontroller timer. Its 16-stage binary counter divides the oscillator signal, while automatic power-on reset establishes an initial timing state after supply startup. In a relay, actuator, or sequencer control circuit, the output can create a repeatable delay or duty-cycle command. The 18 V maximum supply rating and -55 °C to +125 °C operating range suit demanding industrial environments, although the exact recommended operating region must be confirmed. Timing tolerance is driven by the external capacitor, the two timing resistors, their temperature coefficients, and PCB parasitics, so component selection should use worst-case conditions rather than nominal values.

🔧

Motor and Pump Duty-Cycle Control

The MC14541BDT can generate the repetitive on-off interval used by small pumps, fans, valves, or motor-contactor circuits. Its integrated oscillator and 16-stage binary counter provide a compact time base formed from an external capacitor and two resistors, while the output-control logic supplies a periodic timing waveform. This arrangement reduces the need for firmware in simple duty-cycle controls. The 3 MHz maximum clock frequency gives ample frequency headroom, but the actual oscillator frequency should be kept below the rated limit with margin. For inductive or motor loads, use suitable driver, isolation, snubbing, and protection circuits so that switching transients do not couple into the timing network or exceed device ratings.

📊

Periodic Sampling Trigger

In measurement and instrumentation systems, the MC14541BDT can provide a periodic trigger for a sampling sequence, relay scan, or data-acquisition timing function. The 16-stage counter divides the external-RC oscillator frequency, allowing the interval to be established without a digital processor, while automatic power-on reset provides a defined startup count state. The timer should be placed close to the receiving logic so that the output edge reaches the comparator, gate, or counter with minimal delay. For accurate time bases, use a low-tolerance, low-temperature-coefficient capacitor and resistors, and include a keep-out area around the oscillator pins to reduce coupling from switching nodes and EMI sources.

⏱️

Delay and Retriggerable Event Control

The MC14541BDT can act as a simple delay element for equipment that must change state a fixed time after power-up or after a host event drives its control input. Its dedicated output-control logic and power-on reset allow deterministic sequencing without occupying a processor timer, which is useful in appliances, test fixtures, and compact embedded modules. The external oscillator network determines the timing interval, while the counter supplies the division ratio. Design the reset behavior around the actual system requirement because automatic power-on reset and an externally initiated reset are not necessarily interchangeable. Validate startup timing across supply ramp rates and temperature because reset thresholds and oscillator behavior can affect the first output transition.

📱

Appliance and Consumer Timing

The MC14541BDT is applicable to appliances and consumer mechanisms that require a recurring timing sequence, such as indicator flashing, cleaning cycles, or delayed actuator changes. The dedicated timer can continue operating independently of a main application processor, reducing processor load and simplifying timing distribution. Its 3 MHz maximum clock frequency permits a wide selection of divided output rates, while the external capacitor and resistors let the designer set the nominal timing range. The -55 °C to +125 °C rating supports wide environmental conditions, though consumer-product requirements may be narrower. A product designer should account for resistor aging, capacitor temperature coefficient, supply ripple, and startup reset timing when specifying a user-visible interval.

🌐

Oscillator and Clock Signal Processing

The MC14541BDT can divide an externally established oscillator frequency into a lower periodic signal suitable for clocking, gating, or repetitive sequencing. Its 16-stage binary-counter architecture provides fixed division stages, and the integrated oscillator block supports an external-capacitor and two-resistor timing network. This makes the device useful when a stable low-frequency event is needed but a full clock generator is unnecessary. The 3 MHz maximum clock rating defines the upper performance limit; operating margin is necessary for reliable binary transitions and acceptable oscillator behavior. Keep the oscillator network compact, use solid ground-return paths, and avoid routing the timing nodes beneath noisy power or digital switching layers.

What is the operating voltage of MC14541BDT?
The MC14541BDT supports a maximum supply voltage of 18 V according to the onsemi MC14541B family information and the catalog specifications for this ordering code. It is therefore suited to conventional low-voltage control logic and industrial systems operating below that limit. Before designing the circuit, confirm the complete operating-voltage range, absolute maximum ratings, and output-level limits in the manufacturer datasheet. The 18 V maximum is an upper stress limit and should not automatically be treated as the recommended operating supply.
What is the maximum clock frequency of MC14541BDT?
The MC14541BDT has a maximum clock frequency of 3 MHz, as identified in the onsemi product and distributor specifications. Its internal timing system uses a 16-stage binary counter, so the available output frequency is derived by division of the oscillator frequency. The usable operating point should remain below the maximum frequency with suitable margin for temperature, supply, and external-component tolerance. Use the manufacturer timing diagrams and recommended resistor and capacitor values when defining the oscillator network.
What is MC14541BDT and how does it work?
The MC14541BDT is an onsemi programmable timer with a 16-stage binary counter, an integrated oscillator, automatic power-on reset, and output-control logic. According to the MC14541B manufacturer datasheet, the oscillator can operate with an external capacitor and two resistors, while the counter divides that frequency to produce a selected timing interval. This makes the device suitable for periodic events, delayed control actions, and stand-alone timing circuits without a microcontroller.
Where can I download the MC14541BDT datasheet PDF?
The official MC14541BDT family datasheet is available from the onsemi document at https://www.onsemi.com/pdf/datasheet/mc14541b-d.pdf. According to the manufacturer document, the MC14541B is a programmable timer with a 16-stage binary counter, integrated oscillator, automatic power-on reset, and output-control logic. The document also provides the connection information and timing characteristics needed for PCB implementation and oscillator-component selection.
Where can I find the MC14541BDT pinout?
The MC14541BDT pin assignment and connection diagram should be taken from the pin-description section of the onsemi MC14541B manufacturer datasheet. The target device is a 14-pin small-outline surface-mount part, and one catalog result specifically reports a 0.65 mm terminal pitch. Because the available catalog excerpts do not enumerate all 14 signal names, use the manufacturer pin table rather than inferring connections from a generic timer diagram.
What are the key specifications of MC14541BDT that engineers should know?
The principal MC14541BDT specifications are a 3 MHz maximum clock frequency, 16-stage binary counter, 18 V maximum supply voltage, and a -55 °C to +125 °C operating-temperature range. According to the onsemi MC14541B family description, the IC also includes an integrated external-RC-capable oscillator, automatic power-on reset, and output-control logic. The package information identifies a 14-pin small-outline surface-mount configuration with 0.65 mm terminal pitch.
Where to buy MC14541BDT online?
Use the Request a Quote form on this XAIPART product page to request MC14541BDT availability, order quantities, and current commercial terms. The form allows buyers to identify the exact 14-pin ordering suffix without substituting a different package or temperature-grade variant. The MC14541BDTR2G catalog listing refers to a 14-pin TSSOP configuration and should not be assumed to be the same physical package as the target ordering code.
What is the price of MC14541BDT?
The current price of MC14541BDT should be requested through the Request a Quote form on this page so that the order quantity, packaging, and current supplier status can be confirmed together. A catalog listing shows the part as in stock, but it does not provide a qualifying quantity-break schedule for this exact MPN. The requested quotation should specifically identify MC14541BDT and its 14-pin small-outline package rather than a related tape-and-reel or TSSOP ordering code.
What is the lead time for MC14541BDT?
Current lead time for MC14541BDT should be confirmed with the Request a Quote form on this page. Lead time can depend on order quantity, production status, package configuration, and shipment destination. The catalog identifies MC14541BDT as in stock, but an in-stock indication does not establish a guaranteed delivery date for every quantity. Buyers should request a delivery schedule against their required quantity and packaging requirements.
Is MC14541BDT in stock?
MC14541BDT is listed as an in-stock component in the current catalog record. For a binding availability commitment, submit a Request a Quote with the required quantity and destination. Stock status can change quickly, and the exact MPN and package suffix must be confirmed during order processing. This answer applies specifically to MC14541BDT; the separately listed MC14541BDTR2G has a different package designation and should not be substituted automatically.
MC14541BDT vs MC14541BDTR2G - which is better for an existing PCB?
MC14541BDT is the appropriate candidate for a PCB designed around the 14-pin small-outline package associated with the target ordering code, while MC14541BDTR2G is explicitly listed as a 14-pin TSSOP device. Although both belong to the MC14541B timer family and share the 3 MHz headline specification, a change in package technology can change footprint geometry, lead pitch, and PCB land pattern. Confirm the original footprint and pin map before choosing either version.
What is the difference between MC14541BDT and other MC14541B variants?
MC14541BDT is one ordering configuration of the MC14541B programmable-timer family, and the available catalog record identifies it as a 14-pin small-outline part with a 0.65 mm terminal pitch and a -55 °C to +125 °C operating range. MC14541BDTR2G is separately identified as a 14-pin TSSOP version. The core timer function remains associated with the family, but package markings and ordering suffixes must be reconciled with the target PCB before substitution.
When should I choose MC14541BDT over a microcontroller timer?
Choose MC14541BDT when the design needs a simple, autonomous timing interval and does not require programmable firmware, multiple event channels, serial control, or complex calendar functions. Its 16-stage binary counter, external-RC oscillator, power-on reset, and dedicated output logic can implement recurring timing with fewer system resources than a microcontroller. A microcontroller remains preferable when timing requirements change frequently, events must be coordinated in software, or the same controller already provides sufficient timer peripherals.
Is MC14541BDT suitable for industrial control and motor timing?
MC14541BDT is suitable for many industrial timing functions because its specified operating-temperature range extends from -55 °C to +125 °C and its maximum supply voltage is 18 V. The device can implement repeated on-off intervals, delayed transitions, and oscillator-based timing in control equipment. The external oscillator components must be selected for the required accuracy, and inductive loads may require isolation or protection circuitry so that switching transients do not disturb the timer.
What can replace MC14541BDT?
A replacement for MC14541BDT must match the exact 14-pin footprint, pin functions, counter behavior, supply limits, and oscillator interface. No verified same-package drop-in alternative is established by the available cross-reference results. MC14541BDTR2G is a related MC14541B-family device listed in a 14-pin TSSOP package, so it should not be called pin-to-pin compatible with the target unless the original PCB footprint and datasheet pin descriptions confirm equivalence.
What is the best onsemi equivalent for MC14541BDT?
The closest onsemi family candidate shown in the catalog is MC14541BDTR2G, which is identified as a 3 MHz, 14-pin TSSOP programmable timer. It shares the MC14541B timer identity and headline clock specification, but the package designation differs from the small-outline target. Because true drop-in status requires the same land pattern and pin functions, verify the MC14541B datasheet, footprint drawings, and pin table before using it on an existing MC14541BDT board.

Dados de referência de engenharia para MC14541BDT — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose MC14541BDT when the design requires a simple autonomous timing function, such as a repeated control interval, actuator duty cycle, or periodic sampling trigger, and a microcontroller is unnecessary. Its 16-stage binary counter, external-RC oscillator interface, automatic power-on reset, and output-control logic provide a compact dedicated solution. The 3 MHz maximum clock frequency and -55 °C to +125 °C operating range are useful for industrial timing where wider environmental tolerance matters. Do not select it when firmware-defined delays, multiple independent events, serial programming, or complex calendar functions are required; a microcontroller or dedicated real-time clock is better for those applications. Before using a related MC14541B ordering code, verify package dimensions, terminal pitch, land pattern, and pin functions. In particular, MC14541BDTR2G is listed as a 14-pin TSSOP device and should not be assumed to replace MC14541BDT without a footprint review.

Comparação com alternativas

Parâmetro Este produto
Brand onsemi
Package 14-pin small-outline package
Product Type Programmable timer IC
Maximum Clock Frequency 3 MHz
Maximum Supply Voltage 18 V
Operating Temperature Range -55 °C to +125 °C
Counter Architecture 16-stage binary counter
Oscillator Components External capacitor and two resistors
Power-On Reset Automatic
Output Control Logic Integrated

Principais diferenciais

  • Dedicated timing operation without a microcontroller (vs General-purpose microcontroller implementation)
  • Wide specified operating-temperature range (vs Commercial-temperature-only timer option)
  • Higher maximum clock frequency than low-frequency timer alternatives (vs Low-frequency RC timer option)

Notas de projeto

Place the external oscillator capacitor and the two timing resistors close to the associated MC14541BDT pins. Short oscillator traces reduce parasitic capacitance, which can shift the nominal frequency and make behavior more sensitive to PCB contamination. Route the oscillator network away from power inductors, relay contacts, motor windings, and high-speed digital clocks. Maintain a continuous ground reference beneath and around the timing section to minimize coupling into the high-impedance oscillator nodes.

The 18 V maximum supply rating is an absolute upper constraint rather than a guarantee that the device should be operated at 18 V. Derive the actual operating rail from the manufacturer electrical-characteristics table and the voltage tolerances of the surrounding control circuit. Check the absolute maximum limits for both the device and any external oscillator components. Include adequate supply decoupling and verify startup behavior across the minimum and maximum intended input voltage.

Do not select timing components from nominal resistance and capacitance values alone. Calculate the interval with the maximum permitted resistance tolerance, capacitor tolerance, temperature coefficient, supply variation, and PCB parasitic capacitance. Also account for the tolerance of the counter output division and the required startup delay. If timing accuracy is critical, characterize the assembled circuit over temperature and supply range instead of relying only on the oscillator equation.

Confirm the exact package and pin mapping before ordering a related MC14541B device. The catalog identifies MC14541BDTR2G as a 14-pin TSSOP part, while the target MC14541BDT is associated with a 14-pin small-outline ordering code. Both being 14-pin does not establish a common footprint because body width, lead geometry, terminal pitch, and land pattern can differ. A replacement must pass both mechanical and pin-function checks.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer family and distributor records do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for MC14541BDT. Obtain the current onsemi product declaration or material-compliance report before using these values in procurement documentation.

Dados verificados em: 2026-11-16 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MC14541BDT datasheet MC14541BDT pinout MC14541BDT datasheet pdf onsemi MC14541BDT MC14541BDT 3 MHz timer MC14541BDT 18 V MC14541BDT 14 pin package MC14541BDT equivalent MC14541BDT replacement MC14541BDT cross reference MC14541BDT vs MC14541BDTR2G MC14541BDT price MC14541BDT stock MC14541BDT oscillator application circuit

Componentes & termos relacionados

onsemi MC14541BDT MC14541BD MC14541B MC14541BDTR2G Programmable timer Timer IC Clock and timing integrated circuit 16-stage binary counter Integrated oscillator External RC oscillator Automatic power-on reset Output-control logic 3 MHz clock frequency 18 V maximum supply voltage -55 °C to +125 °C 14-pin small-outline package TSSOP package 0.65 mm terminal pitch Industrial control Motor timing Periodic sampling Power management Semiconductor
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ