NXP Semiconductors

MC145484DW - 13-Bit 5V PCM Codec-Filter | NXP

N.º da peça: MC145484DW ✓ Ativo
5 V Vdss 20-pin SOIC Package
MOQ: 1 |

MC145484DW Visão geral

The NXP Semiconductors MC145484DW is a 13-bit, 5 V PCM codec-filter for per-channel voice digitization and reconstruction, with pin-selectable Mu-Law or A-Law companding in a 20-pin SOIC package. It combines pulse-code modulation encoding or decoding, band limiting, and smoothing functions required by PCM telecommunications systems.

A PCM codec-filter is a voice-processing integrated circuit that converts between analog speech signals and digital PCM data. Its place in the signal chain is between the audio input or output circuitry and a digital communications system. The codec-filter block provides the analog-to-digital or digital-to-analog conversion functions, while the companding circuitry supports the two commonly used logarithmic voice formats: Mu-Law and A-Law.

The MC145484 provides a 13-bit PCM interface, operates from a 5 V supply, and supports pin-selectable Mu-Law or A-Law operation. According to the NXP manufacturer datasheet, it performs voice digitization and reconstruction together with the band-limiting and smoothing required by PCM systems. The device can operate in synchronous or asynchronous system configurations, giving it flexibility in telephony, voice-processing, and embedded communications equipment.

Because companding is selected by pins rather than an internal programming interface, the device is suited to designs where a fixed voice format is known during hardware configuration. The 13-bit PCM resolution supports conventional voice-band processing, while the integrated filtering reduces the need for separate reconstruction smoothing networks. Its 20-pin SOIC package is suitable for conventional surface-mount assembly and legacy voice-interface designs.

Typical uses include PCM voice codecs in telephony equipment, speech-processing modules, digital telephone interfaces, and communications systems that transmit or reconstruct companded voice. The MC145484 is particularly appropriate when the system requires a dedicated PCM codec-filter with selectable Mu-Law or A-Law companding rather than a general-purpose modern audio codec.

Designers should confirm clocking mode, pin levels, analog input and output requirements, and external filtering against the manufacturer datasheet before layout. Decoupling and analog signal routing are especially important because codec performance can be affected by supply noise, clock jitter, and unwanted coupling from digital switching signals. Stable power and short analog traces are therefore preferable to long PCB routes around the device.

This product page combines the manufacturer function description, package and interface details, verified lifecycle context, and engineering guidance for selecting and implementing the MC145484DW. It also distinguishes documented drop-in replacements from merely similar codecs so that board-level replacement decisions are based on package, pin compatibility, and functional equivalence rather than broad device similarity.

Alternativas drop-in para MC145484DW — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Nenhuma alternativa drop-in disponível para este produto.

Solicitar alternativas

MC145484DW Classificações máximas e características elétricas

Product Type PCM codec-filter
PCM Resolution 13 bit
Tensão de alimentação 5 V
Companding Format Pin-selectable Mu-Law or A-Law
Processing Channels 1 channel
Functions Voice digitization, reconstruction, band limiting, and smoothing
Operating Modes Synchronous or asynchronous
Encapsulamento 20-pin SOIC
Tipo de montagem Surface mount
Terminal Finish Tin lead
Moisture Sensitivity Level MSL 1
Peak Reflow Temperature 220 °C
Maximum Time at Peak Reflow Temperature 30 s
JESD-609 Code e0

Guia de Configuração de Pinos do MC145484DW 20-pin soic

Configuração de pinos para MC145484DW (pacote 20-pin soic). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 20-pin soic para MC145484DW

Nenhum dado detalhado de pinagem disponível para MC145484DW.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MC145484DW é adequado para 6 aplicaçãos: PCM Telephony Voice Interface, Speech Processing Module, Digital Telephone Equipment, Voice Communications Embedded System, Legacy Voice Card Retrofit, Voice Monitor and Test Equipment.

📞

PCM Telephony Voice Interface

The MC145484DW fits a conventional PCM voice interface because it performs digitization, reconstruction, band limiting, and smoothing in a single 5 V circuit. Pin-selectable Mu-Law or A-Law companding lets the hardware designer match the format used by the line interface or communications controller. In a synchronous or asynchronous telephony design, the codec serves as the bridge between the voice-band analog node and the 13-bit PCM bus. The principal design task is to preserve the correct clock phase, signal levels, and analog filtering defined by the manufacturer application guidance.

🎙️

Speech Processing Module

A speech-processing module can use the MC145484DW when its external processor expects 13-bit companded PCM rather than a modern serial audio stream. The device converts and reconstructs the voice signal while providing the band-limiting and smoothing needed for PCM speech. Its 5 V operating supply and pin-selectable companding make it suitable for legacy speech-capture and playback subsystems. Engineers should budget adequate settling time for the analog path and route clock and data signals away from sensitive voice inputs to minimize coupling into the reconstructed signal.

☎️

Digital Telephone Equipment

The MC145484DW is appropriate for digital telephone equipment that retains a dedicated 5 V PCM voice path. Mu-Law or A-Law selection allows the same codec architecture to support different regional or network signaling conventions. Its integrated band-limiting and smoothing functions reduce the external analog reconstruction complexity commonly associated with PCM systems. In a telephone design, the codec must be synchronized correctly with the line-signaling controller, and its analog interface should be isolated from high-level telephone-network transients.

🌐

Voice Communications Embedded System

The MC145484DW can serve embedded communications equipment that uses a processor-side PCM interface instead of a modern I2S audio codec. The device provides 13-bit voice digitization and reconstruction from a 5 V supply and can operate with either synchronous or asynchronous timing. This makes it useful for maintaining or adapting established telephone-on-chip and voice-server designs. Integration requires reviewing the external master clock, data timing, analog input impedance, and output reconstruction network against the datasheet reference circuit.

🔧

Legacy Voice Card Retrofit

The MC145484DW is useful for repairing or extending a legacy voice card when the original system uses a 13-bit, 5 V PCM codec-filter with fixed Mu-Law or A-Law operation. Because the part combines conversion, filtering, and smoothing, it can preserve the architecture of the existing voice path without redesigning it around a contemporary audio converter. The 20-pin SOIC outline permits direct comparison with the original board footprint, but every net must be checked for clock, companding-select, analog-signal, and power-function compatibility before installation.

🖥️

Voice Monitor and Test Equipment

The MC145484DW can be used in voice monitoring or test equipment designed around the traditional PCM telecommunications interface. Its built-in band limiting and smoothing allow the instrument to exercise a 13-bit companded voice channel using the same clock-and-data arrangement found in legacy telephone systems. Pin-selectable companding supports test configurations that must evaluate both Mu-Law and A-Law behavior. For accurate measurements, the instrument should minimize ground noise, maintain deterministic clocking, and observe the manufacturer-defined analog timing and output-loading requirements.

Resumo dos produtos recomendados

MC145484DW NXP Semiconductors Usado em: PCM Telephony Voice Interface, Speech Processing Module, Digital Telephone Equipment, Voice Communications Embedded System, Legacy Voice Card Retrofit, Voice Monitor and Test Equipment MC145484 MC145484 device family Usado em: PCM Telephony Voice Interface, Speech Processing Module, Digital Telephone Equipment, Voice Communications Embedded System, Legacy Voice Card Retrofit, Voice Monitor and Test Equipment
What is the MC145484DW?
The MC145484DW is a single-channel, 13-bit, 5 V PCM codec-filter designed for voice digitization and reconstruction. According to the NXP manufacturer datasheet, it combines PCM conversion with band limiting and smoothing and provides pin-selectable Mu-Law or A-Law companding. It is packaged in a 20-pin SOIC and is intended for legacy PCM voice and telecommunications systems.
What PCM formats does the MC145484DW support?
The MC145484DW supports both Mu-Law and A-Law companding, with the format selected by device pins. This gives a hardware designer a way to configure the required logarithmic voice format without using a serial programming interface. The manufacturer datasheet identifies the device as a general-purpose per-channel PCM codec-filter with pin-selectable companding.
What are the key specifications of MC145484DW?
The principal MC145484DW specifications are a 5 V supply, 13-bit PCM resolution, per-channel voice processing, selectable Mu-Law or A-Law companding, and a 20-pin SOIC package. According to the NXP manufacturer datasheet, the circuit also handles band limiting and smoothing and can operate in either synchronous or asynchronous systems.
Where can I download the MC145484DW datasheet PDF?
The official MC145484DW datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/MC145484.pdf. It is the preferred document for checking the complete pin descriptions, timing diagrams, companding configuration, clock requirements, analog interfaces, and recommended application circuit before replacing a part on an existing board.
Where can I find the MC145484DW pinout?
The MC145484DW pinout is shown in the pin-description section of the official NXP manufacturer datasheet. Use that table to verify signal names, analog connections, clock inputs, power pins, ground pins, and companding-selection pins against the PCB layout. The searchable online product listings identify the package as 20-pin SOIC but do not replace the authoritative pin table.
Can MC145484DW operate in both synchronous and asynchronous systems?
Yes, the MC145484DW is designed to operate in both synchronous and asynchronous PCM systems. This flexibility allows the codec-filter to fit architectures whose timing is locally generated or derived from an external communications system. Exact clock frequency, setup time, and synchronization requirements must be checked in the manufacturer timing diagrams before implementation.
Where can I buy MC145484DW online?
Use the Request a Quote form on this page to request MC145484DW availability, order quantity, and lead time. The form is the appropriate channel for a quotation tied to the exact 20-pin SOIC ordering code. Current stock status and shipment timing should be confirmed when the quotation is returned rather than inferred from a generic catalog listing.
What is the price of MC145484DW?
Request a current MC145484DW quotation through the Request a Quote form on this page. The form should be completed with the required quantity, package variant, and delivery destination so that availability and commercial terms can be matched to the exact ordering code. No static price should be inferred from the product family or from a similar codec.
What is the lead time for MC145484DW?
The current lead time for MC145484DW depends on the requested quantity, inventory position, and packaging schedule. Submit the required quantity through the Request a Quote form on this page and request a committed lead time and shipment date in the response. This approach avoids treating a generic marketplace listing as a guaranteed manufacturing schedule.
Is MC145484DW in stock?
Stock for the exact MC145484DW ordering code is best confirmed through the Request a Quote form on this page. Include the target quantity and delivery location, and request both availability status and an estimated dispatch date. Because inventory can change for legacy interface ICs, a current order response is more reliable than a general product-page indicator.
What can replace MC145484DW?
A valid replacement must use the same 20-pin SOIC footprint, preserve the pin functions and clocking behavior, and provide equivalent 5 V, 13-bit PCM operation with the required Mu-Law or A-Law companding. The available cross-reference search identifies a pin-to-pin replacement from Winbond but does not expose its orderable MPN, so no specific substitute can be validated here. Use the Request a Quote form with the candidate MPN for review.
Is MC14LC5480DW the same as MC145484DW?
No, MC14LC5480DW and MC145484DW should not be treated as identical without a complete pin and functional comparison. The MC145484DW is specified as a 5 V, 13-bit PCM codec-filter with pin-selectable Mu-Law or A-Law companding, while the comparison information for MC14LC5480DW does not establish equivalence. Review the clock, analog interface, pin names, and companding logic before considering substitution.
When should I choose MC145484DW over a newer audio codec?
Choose the MC145484DW when a legacy system specifically requires a dedicated 5 V PCM codec-filter with 13-bit resolution and pin-selectable Mu-Law or A-Law companding. A newer audio codec is preferable when the design requires modern digital interfaces, lower power, integrated analog converters, or software-controlled routing. The MC145484DW remains attractive for maintaining established PCM voice hardware with minimal architectural changes.
Is MC145484DW suitable for a telephony voice interface?
Yes, the MC145484DW is suitable for a conventional telephony or voice-interface stage when the system uses 5 V PCM signaling, 13-bit companded voice, and an external processor or communications controller. Its integrated digitization, reconstruction, band limiting, and smoothing reduce the number of separate voice-filter stages. The external clocking and interface must still be verified against the target system timing.
MC145484DW vs MC145484: which package-ordered version should be selected?
MC145484DW identifies the ordering variant supplied in a 20-pin SOIC package, while MC145484 is the broader device family name. For a new PCB or a drop-in maintenance replacement, use the complete orderable code MC145484DW and confirm the package drawing and pinout against the board. The manufacturer datasheet also lists the family in SOG, SSOP, and TSSOP forms, so the family name alone does not establish mechanical compatibility.

Dados de referência de engenharia para MC145484DW — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the MC145484DW for a 5 V, 13-bit PCM voice system that requires dedicated Mu-Law or A-Law companding, integrated band limiting, and support for synchronous or asynchronous timing. It is particularly suitable for maintaining legacy telephony, digital telephone, speech-processing, and voice-interface hardware. Do not choose it for a new design that requires I2S, modern digital microphone support, programmable audio routing, or very low power consumption. MC14LC5480DW requires a full clock, analog-interface, and pin-level comparison before substitution because its exact compatibility is not established. The cross-reference search mentions a pin-to-pin Winbond replacement, but the orderable MPN is not shown and must be identified before it can be recommended for a drop-in PCB replacement.

Comparação com alternativas

Parâmetro Este produto
Brand NXP Semiconductors
Package 20-pin SOIC
Product Type PCM codec-filter
Supply Voltage 5 V
PCM Resolution 13 bit
Companding Pin-selectable Mu-Law or A-Law
Processing Mode Synchronous or asynchronous operation
Integrated Functions Voice digitization, reconstruction, band limiting, and smoothing
Moisture Sensitivity Level MSL 1
Terminal Finish Tin lead

Principais diferenciais

  • Integrated voice conversion and filtering (vs MC14LC5480DW)
  • Hardware-selectable voice companding (vs MC145484)
  • Flexible PCM timing architecture (vs MC14LC5480DW)

Notas de projeto

Use the manufacturer pin-description table and application circuit to assign the analog, digital, clock, power, and companding-select nets before laying out the PCB. Keep the 20-pin SOIC footprint compatible with the original board and provide a local ground return for each supply connection. Do not rely on the abbreviated family description alone because MC145484 variants are also offered in SOG, SSOP, and TSSOP packages.

Route clock and PCM data away from the voice input and reconstruction output where the layout permits, and terminate or control each interface according to the manufacturer timing circuit. Supply noise and clock jitter can affect a 13-bit codec path even when the part is operated from 5 V. Maintain the specified bypass capacitance and analog grounding arrangement because broad decoupling claims alone do not replace the reference layout.

Confirm Mu-Law or A-Law selection at the pins before power-up and ensure the clocking mode matches the surrounding controller. Also verify the analog signal amplitude and reconstruction network against the datasheet. MC14LC5480DW should not be substituted solely because it has a related MPN, and the unnamed Winbond cross-reference should not be ordered until its complete MPN and pin compatibility have been confirmed.

The MC145484DW is a small-signal 5 V interface IC rather than a power semiconductor, so SOA analysis is not applicable. Thermal design should nevertheless account for the actual supply voltage, digital switching activity, and ambient temperature at the SOIC site. Use the manufacturer power-dissipation limits and junction-temperature data for the final thermal assessment; estimate only after those operating conditions are known.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
No
Sem halogênios
Unknown
Minerais de conflito
Unknown

The ordering information identifies a tin-lead terminal finish. RoHS, REACH, halogen-free, and conflict-minerals status are not stated. AEC-Q100 qualification is not indicated for this legacy interface device.

Buscas relacionadas

MC145484DW datasheet MC145484DW pinout MC145484DW datasheet pdf MC145484DW equivalent MC145484DW replacement MC145484DW cross reference MC145484DW vs MC14LC5480DW MC145484DW 5V PCM codec MC145484DW 20-SOIC MC145484DW Mu-Law A-Law NXP MC145484DW MC145484DW price MC145484DW stock MC145484DW application circuit

Componentes & termos relacionados

NXP Semiconductors MC145484DW MC145484 MC14LC5480DW PCM codec-filter audio codec codec interface IC PCM Mu-Law A-Law voice digitization voice reconstruction band limiting signal smoothing 13-bit resolution 5 V supply synchronous operation asynchronous operation 20-pin SOIC SOIC package family surface-mount package telephony voice interface digital telephone equipment speech processing JESD-609
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ