MC145484DW - 13-Bit 5V PCM Codec-Filter | NXP
MPN: MC145484DW ✓ فعالMC145484DW نمای کلی
A PCM codec-filter is a voice-processing integrated circuit that converts between analog speech signals and digital PCM data. Its place in the signal chain is between the audio input or output circuitry and a digital communications system. The codec-filter block provides the analog-to-digital or digital-to-analog conversion functions, while the companding circuitry supports the two commonly used logarithmic voice formats: Mu-Law and A-Law.
The MC145484 provides a 13-bit PCM interface, operates from a 5 V supply, and supports pin-selectable Mu-Law or A-Law operation. According to the NXP manufacturer datasheet, it performs voice digitization and reconstruction together with the band-limiting and smoothing required by PCM systems. The device can operate in synchronous or asynchronous system configurations, giving it flexibility in telephony, voice-processing, and embedded communications equipment.
Because companding is selected by pins rather than an internal programming interface, the device is suited to designs where a fixed voice format is known during hardware configuration. The 13-bit PCM resolution supports conventional voice-band processing, while the integrated filtering reduces the need for separate reconstruction smoothing networks. Its 20-pin SOIC package is suitable for conventional surface-mount assembly and legacy voice-interface designs.
Typical uses include PCM voice codecs in telephony equipment, speech-processing modules, digital telephone interfaces, and communications systems that transmit or reconstruct companded voice. The MC145484 is particularly appropriate when the system requires a dedicated PCM codec-filter with selectable Mu-Law or A-Law companding rather than a general-purpose modern audio codec.
Designers should confirm clocking mode, pin levels, analog input and output requirements, and external filtering against the manufacturer datasheet before layout. Decoupling and analog signal routing are especially important because codec performance can be affected by supply noise, clock jitter, and unwanted coupling from digital switching signals. Stable power and short analog traces are therefore preferable to long PCB routes around the device.
This product page combines the manufacturer function description, package and interface details, verified lifecycle context, and engineering guidance for selecting and implementing the MC145484DW. It also distinguishes documented drop-in replacements from merely similar codecs so that board-level replacement decisions are based on package, pin compatibility, and functional equivalence rather than broad device similarity.
جایگزینهای drop-in برای MC145484DW — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
هیچ جایگزین مستقیمی برای این محصول موجود نیست.
درخواست جایگزینMC145484DW حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | PCM codec-filter |
| PCM Resolution | 13 bit |
| ولتاژ تغذیه | 5 V |
| Companding Format | Pin-selectable Mu-Law or A-Law |
| Processing Channels | 1 channel |
| Functions | Voice digitization, reconstruction, band limiting, and smoothing |
| Operating Modes | Synchronous or asynchronous |
| بستهبندی | 20-pin SOIC |
| نوع نصب | Surface mount |
| Terminal Finish | Tin lead |
| Moisture Sensitivity Level | MSL 1 |
| Peak Reflow Temperature | 220 °C |
| Maximum Time at Peak Reflow Temperature | 30 s |
| JESD-609 Code | e0 |
راهنمای پیکربندی پین MC145484DW 20-pin soic
پیکربندی پین برای MC145484DW (پکیج 20-pin soic). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای MC145484DW.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
MC145484DW مناسب است برای 6 کاربردs: PCM Telephony Voice Interface, Speech Processing Module, Digital Telephone Equipment, Voice Communications Embedded System, Legacy Voice Card Retrofit, Voice Monitor and Test Equipment.
PCM Telephony Voice Interface
The MC145484DW fits a conventional PCM voice interface because it performs digitization, reconstruction, band limiting, and smoothing in a single 5 V circuit. Pin-selectable Mu-Law or A-Law companding lets the hardware designer match the format used by the line interface or communications controller. In a synchronous or asynchronous telephony design, the codec serves as the bridge between the voice-band analog node and the 13-bit PCM bus. The principal design task is to preserve the correct clock phase, signal levels, and analog filtering defined by the manufacturer application guidance.
پیشنهادی
Speech Processing Module
A speech-processing module can use the MC145484DW when its external processor expects 13-bit companded PCM rather than a modern serial audio stream. The device converts and reconstructs the voice signal while providing the band-limiting and smoothing needed for PCM speech. Its 5 V operating supply and pin-selectable companding make it suitable for legacy speech-capture and playback subsystems. Engineers should budget adequate settling time for the analog path and route clock and data signals away from sensitive voice inputs to minimize coupling into the reconstructed signal.
پیشنهادی
Digital Telephone Equipment
The MC145484DW is appropriate for digital telephone equipment that retains a dedicated 5 V PCM voice path. Mu-Law or A-Law selection allows the same codec architecture to support different regional or network signaling conventions. Its integrated band-limiting and smoothing functions reduce the external analog reconstruction complexity commonly associated with PCM systems. In a telephone design, the codec must be synchronized correctly with the line-signaling controller, and its analog interface should be isolated from high-level telephone-network transients.
پیشنهادی
Voice Communications Embedded System
The MC145484DW can serve embedded communications equipment that uses a processor-side PCM interface instead of a modern I2S audio codec. The device provides 13-bit voice digitization and reconstruction from a 5 V supply and can operate with either synchronous or asynchronous timing. This makes it useful for maintaining or adapting established telephone-on-chip and voice-server designs. Integration requires reviewing the external master clock, data timing, analog input impedance, and output reconstruction network against the datasheet reference circuit.
پیشنهادی
Legacy Voice Card Retrofit
The MC145484DW is useful for repairing or extending a legacy voice card when the original system uses a 13-bit, 5 V PCM codec-filter with fixed Mu-Law or A-Law operation. Because the part combines conversion, filtering, and smoothing, it can preserve the architecture of the existing voice path without redesigning it around a contemporary audio converter. The 20-pin SOIC outline permits direct comparison with the original board footprint, but every net must be checked for clock, companding-select, analog-signal, and power-function compatibility before installation.
پیشنهادی
Voice Monitor and Test Equipment
The MC145484DW can be used in voice monitoring or test equipment designed around the traditional PCM telecommunications interface. Its built-in band limiting and smoothing allow the instrument to exercise a 13-bit companded voice channel using the same clock-and-data arrangement found in legacy telephone systems. Pin-selectable companding supports test configurations that must evaluate both Mu-Law and A-Law behavior. For accurate measurements, the instrument should minimize ground noise, maintain deterministic clocking, and observe the manufacturer-defined analog timing and output-loading requirements.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای MC145484DW — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول |
|---|---|
| Brand | NXP Semiconductors |
| Package | 20-pin SOIC |
| Product Type | PCM codec-filter |
| Supply Voltage | 5 V |
| PCM Resolution | 13 bit |
| Companding | Pin-selectable Mu-Law or A-Law |
| Processing Mode | Synchronous or asynchronous operation |
| Integrated Functions | Voice digitization, reconstruction, band limiting, and smoothing |
| Moisture Sensitivity Level | MSL 1 |
| Terminal Finish | Tin lead |
تفاوتهای کلیدی
- Integrated voice conversion and filtering (در مقابلMC14LC5480DW)
- Hardware-selectable voice companding (در مقابلMC145484)
- Flexible PCM timing architecture (در مقابلMC14LC5480DW)
یادداشتهای طراحی
Use the manufacturer pin-description table and application circuit to assign the analog, digital, clock, power, and companding-select nets before laying out the PCB. Keep the 20-pin SOIC footprint compatible with the original board and provide a local ground return for each supply connection. Do not rely on the abbreviated family description alone because MC145484 variants are also offered in SOG, SSOP, and TSSOP packages.
Route clock and PCM data away from the voice input and reconstruction output where the layout permits, and terminate or control each interface according to the manufacturer timing circuit. Supply noise and clock jitter can affect a 13-bit codec path even when the part is operated from 5 V. Maintain the specified bypass capacitance and analog grounding arrangement because broad decoupling claims alone do not replace the reference layout.
Confirm Mu-Law or A-Law selection at the pins before power-up and ensure the clocking mode matches the surrounding controller. Also verify the analog signal amplitude and reconstruction network against the datasheet. MC14LC5480DW should not be substituted solely because it has a related MPN, and the unnamed Winbond cross-reference should not be ordered until its complete MPN and pin compatibility have been confirmed.
The MC145484DW is a small-signal 5 V interface IC rather than a power semiconductor, so SOA analysis is not applicable. Thermal design should nevertheless account for the actual supply voltage, digital switching activity, and ambient temperature at the SOIC site. Use the manufacturer power-dissipation limits and junction-temperature data for the final thermal assessment; estimate only after those operating conditions are known.
اطلاعات انطباق
The ordering information identifies a tin-lead terminal finish. RoHS, REACH, halogen-free, and conflict-minerals status are not stated. AEC-Q100 qualification is not indicated for this legacy interface device.