MC1488DR2 - 4-Channel RS-232 Driver | onsemi | SOIC-14
N.º da peça: MC1488DR2 ✗ Fim de vidaMC1488DR2 Visão geral
An RS-232 line driver is a specialized interface-circuit component that converts logic-level signals from a digital system into the voltage levels required by an RS-232 communications port. The MC1488 family belongs to the broader line-driver and interface-IC hierarchy, where four independent driver channels can support multiple serial links, control signals, or communications ports within one package.
Key features include four independent driver outputs, support for EIA-232D signaling, current limiting at approximately ±10 mA typical, and operation from ±15 V supplies. Its 14-SOIC surface-mount construction makes it suitable for compact communications and industrial-control equipment. Each channel provides a separate driver path, allowing multiple logic signals to be shifted into RS-232-compatible levels.
The MC1488 uses separate positive and negative supply rails rather than a single low-voltage rail. This architecture is appropriate when the surrounding equipment already provides ±15 V or requires legacy RS-232 voltage levels. Board designers must account for the relationship between input logic levels, supply polarity, output current, and the load presented by the RS-232 interface.
Typical applications include legacy RS-232 ports, data-terminal interfaces, industrial equipment connections, test systems, and embedded control panels. In these systems, the MC1488DR2 can convert four TTL or CMOS-compatible control signals into RS-232 levels while operating with standard ±15 V communications supplies.
A critical design consideration is the need to observe supply sequencing and the limits of the RS-232 interface. Place bypass capacitors close to the supply pins, maintain short return paths, and confirm that the connected cable and receiver tolerate the driver’s output characteristics before finalizing the layout.
This page organizes the MC1488DR2 specifications, sourcing information, drop-in candidates, and application guidance to support faster design review. Because the MC1488DR2 is identified as obsolete, lifecycle planning and verified alternate sourcing are especially important for new and maintenance designs.
Alternativas drop-in para MC1488DR2 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
DS14C88M/NOPB
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
SN75188DR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC1488DR2 Especificações
| Product Type | Quad RS-232 line driver |
| Number of Drivers | 4 drivers |
| Number of Receivers | 0 receivers |
| Supported Protocol | RS-232 / EIA-232D |
| Tensão de alimentação | ±15 V |
| Typical Output Current | ±10 mA |
| Encapsulamento | 14-SOIC |
| Package Width | 3.90 mm |
| Tipo de montagem | Surface mount |
| Temperatura de operação | 0°C to +75°C |
| Contagem de pinos | 14 pins |
| Datasheet Length | 11 pages |
| Status do ciclo de vida | Obsolete |
Guia de Configuração de Pinos do MC1488DR2 3.90 mm
Configuração de pinos para MC1488DR2 (pacote 3.90 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para MC1488DR2.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MC1488DR2 é adequado para 6 aplicaçãos: Legacy RS-232 Communication Ports, Industrial Control Equipment, Data Terminal Equipment Interfaces, Embedded Control Panels, Test and Measurement Systems, RS-232 Signal Expansion.
Legacy RS-232 Communication Ports
The MC1488DR2 is suitable for legacy RS-232 communication ports that already operate from ±15 V and require four independent driver channels. Its four-driver, zero-receiver configuration maps directly to a multi-signal interface such as transmit data, request-to-send, data-terminal-ready, and other outbound control lines. The onsemi MC1488 datasheet identifies ±10 mA typical current-limited outputs and EIA-232D interface intent. Unlike a transceiver, the device does not receive RS-232 inputs, so a separate receiver IC is required when bidirectional communication is needed.
Recomendado
Industrial Control Equipment
The MC1488DR2 fits legacy industrial-control boards that use RS-232 for equipment-to-console or controller-to-peripheral links. Four driver channels allow one package to handle several command or status lines, while the 14-SOIC surface-mount format supports compact assemblies. Its specified 0°C to +75°C operating range must remain within the enclosure temperature envelope. For installations exposed to long cables or industrial transients, add the protection required by the cable environment rather than relying on the IC alone.
Recomendado
Data Terminal Equipment Interfaces
The MC1488DR2 was designed for data-terminal equipment and data-communications equipment interfaces using EIA-232D signaling. It can translate four logic-level outputs into four line-driver channels, making it appropriate for older terminals, service equipment, and diagnostic controllers that retain ±15 V interface rails. The zero-receiver architecture makes the part more specialized than an RS-232 transceiver. System partitioning should therefore place a suitable receiver on inbound signals and keep ground and cable routing within the intended interface topology.
Recomendado
Embedded Control Panels
A control panel built around an older processor or controller can use the MC1488DR2 to produce four RS-232 command outputs for a connected instrument. The 14-SOIC package reduces board area compared with a through-hole MC1488N implementation, although the obsolete lifecycle status makes long-term availability a central planning concern. Verify the controller’s logic levels and the panel’s ±15 V supply arrangement. Use the manufacturer pin table to prevent confusion between driver-enable, supply, ground, and output assignments.
Recomendado
Test and Measurement Systems
The MC1488DR2 can drive RS-232 control and measurement signals in legacy test systems that require four one-way driver channels. Its EIA-232D-oriented architecture and typical ±10 mA current-limited output align with established RS-232 equipment interfaces. The part is not a receiver, so a complete test port needs separate receive circuitry. Before inserting it into a mixed-instrument rack, compare supply rails, logic thresholds, output levels, and connector assignments against the original circuit and the TI DS14C88M/NOPB or SN75188DR datasheets when considering alternatives.
Recomendado
RS-232 Signal Expansion
The MC1488DR2 can expand four outbound RS-232 signals when a controller already uses another interface IC for receive functions. This arrangement preserves separate driver and receiver blocks and avoids placing unrelated circuitry on unused channels. Because its output current is approximately ±10 mA typical, designers should confirm that connected receivers and cable loading remain within the device’s limits. The 14-SOIC footprint also makes it practical for compact interface cards, subject to the MC1488DR2’s obsolete status and current sourcing conditions.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MC1488DR2 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | DS14C88M/NOPB | SN75188DR |
|---|---|---|---|
| Brand | onsemi | Texas Instruments | Texas Instruments |
| Package | 14-SOIC | 14-SOIC - same package | 14-SOIC - same package |
| Device Type | Quad RS-232 line driver | Quad RS-232 transmitter | Quad RS-232 driver |
| Number of Drivers | 4 drivers | 4 drivers | 4 drivers |
Principais diferenciais
- Direct maintenance continuity for established ±15 V interfaces (vs DS14C88M/NOPB)
- Dedicated four-driver implementation (vs SN75188DR)
- Surface-mount 14-SOIC implementation (vs MC1488N)
Notas de projeto
The MC1488DR2 operates from positive and negative rails identified as ±15 V. Confirm both rail magnitudes and polarity against the manufacturer datasheet before connecting power. Keep the supply and ground return paths short, place the required bypass capacitors close to the device, and ensure that startup and shutdown sequencing does not exceed the absolute maximum conditions.
Use the 14-SOIC land pattern and follow the package drawing, pad dimensions, and reflow guidance in the manufacturer documentation. Verify the physical pin-1 orientation on the assembled board rather than relying only on the top marking. Because the device is obsolete, capture the final pin mapping and package details in the production documentation to protect maintenance builds.
Do not substitute a four-transceiver IC for the MC1488DR2 without checking the full pin arrangement; the target contains four drivers and no receivers. Likewise, a matching 14-SOIC package does not prove that supply thresholds or output levels are identical. Compare the MC1488 datasheet with the candidate datasheet for enable inputs, logic thresholds, output current, and absolute maximum ratings.
RS-232 interfaces connected by cables can pick up noise and transients, so route the driver outputs away from sensitive analog and clock paths. Use a defined reference-ground connection and consider appropriate series impedance or protection at the connector when the cable environment requires it. The MC1488’s typical ±10 mA output current is a key parameter to check against the receiver and protection network.
The listed operating-temperature range is 0°C to +75°C. Place the device away from concentrated heat sources and account for PCB copper, enclosure temperature, and nearby regulators when evaluating an industrial installation. If the required ambient range extends outside the specified interval, choose a suitably rated interface solution rather than treating the obsolete MC1488DR2 as an unrestricted industrial part.
Informações de conformidade
The manufacturer datasheet identifies EIA-232D interface use, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified. AEC-Q100 is not applicable to this legacy communications interface device.