onsemi

MC1488DR2 - 4-Channel RS-232 Driver | onsemi | SOIC-14

MPN: MC1488DR2 ✗ 停產
±15 V Vdss ±10 mA Id 14-SOIC Package
MOQ: 1 |

MC1488DR2 概覽

The onsemi MC1488DR2 is a four-channel RS-232 line driver with no receiver channels, designed for EIA-232D data-terminal and data-communications interfaces. The device operates from dual positive and negative supplies of ±15 V, provides typical current-limited outputs of ±10 mA, and is packaged in a surface-mount 14-pin SOIC measuring 3.90 mm wide.

An RS-232 line driver is a specialized interface-circuit component that converts logic-level signals from a digital system into the voltage levels required by an RS-232 communications port. The MC1488 family belongs to the broader line-driver and interface-IC hierarchy, where four independent driver channels can support multiple serial links, control signals, or communications ports within one package.

Key features include four independent driver outputs, support for EIA-232D signaling, current limiting at approximately ±10 mA typical, and operation from ±15 V supplies. Its 14-SOIC surface-mount construction makes it suitable for compact communications and industrial-control equipment. Each channel provides a separate driver path, allowing multiple logic signals to be shifted into RS-232-compatible levels.

The MC1488 uses separate positive and negative supply rails rather than a single low-voltage rail. This architecture is appropriate when the surrounding equipment already provides ±15 V or requires legacy RS-232 voltage levels. Board designers must account for the relationship between input logic levels, supply polarity, output current, and the load presented by the RS-232 interface.

Typical applications include legacy RS-232 ports, data-terminal interfaces, industrial equipment connections, test systems, and embedded control panels. In these systems, the MC1488DR2 can convert four TTL or CMOS-compatible control signals into RS-232 levels while operating with standard ±15 V communications supplies.

A critical design consideration is the need to observe supply sequencing and the limits of the RS-232 interface. Place bypass capacitors close to the supply pins, maintain short return paths, and confirm that the connected cable and receiver tolerate the driver’s output characteristics before finalizing the layout.

This page organizes the MC1488DR2 specifications, sourcing information, drop-in candidates, and application guidance to support faster design review. Because the MC1488DR2 is identified as obsolete, lifecycle planning and verified alternate sourcing are especially important for new and maintenance designs.

直接替換替代品,適用於 MC1488DR2 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

DS14C88M/NOPB

✅ 直接替換
📦 14-SOIC
Listed supply range is 4.5 V to 12.6 V versus the MC1488DR2's ±15 V operation; package and four-driver function match, but full pin and threshold compatibility still requires verification.

📋 參考替代品(不在目錄中)

SN75188DR

✅ 直接替換
📦 14-SOIC
The MC1488DR2 provides typical ±10 mA current-limited outputs at ±15 V; the cross-reference describes the SN75188DR as electrically similar but not identical, so output-level and threshold differences require checking.

📋 參考替代品(不在目錄中)

MC1488DR2 規格

Product Type Quad RS-232 line driver
Number of Drivers 4 drivers
Number of Receivers 0 receivers
Supported Protocol RS-232 / EIA-232D
供應電壓 ±15 V
Typical Output Current ±10 mA
封裝 14-SOIC
Package Width 3.90 mm
安裝類型 Surface mount
工作溫度 0°C to +75°C
腳位數 14 pins
Datasheet Length 11 pages
生命週期狀態 Obsolete

MC1488DR2 3.90 mm 腳位配置指南

MC1488DR2(3.90 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

MC1488DR2 的 3.90 mm 封裝腳位圖

無詳細腳位定義資料: MC1488DR2.

請參閱 資料表 以查看完整腳位配置。

典型應用

MC1488DR2 適用於 6 應用s: Legacy RS-232 Communication Ports, Industrial Control Equipment, Data Terminal Equipment Interfaces, Embedded Control Panels, Test and Measurement Systems, RS-232 Signal Expansion.

🌐

Legacy RS-232 Communication Ports

The MC1488DR2 is suitable for legacy RS-232 communication ports that already operate from ±15 V and require four independent driver channels. Its four-driver, zero-receiver configuration maps directly to a multi-signal interface such as transmit data, request-to-send, data-terminal-ready, and other outbound control lines. The onsemi MC1488 datasheet identifies ±10 mA typical current-limited outputs and EIA-232D interface intent. Unlike a transceiver, the device does not receive RS-232 inputs, so a separate receiver IC is required when bidirectional communication is needed.

🏭

Industrial Control Equipment

The MC1488DR2 fits legacy industrial-control boards that use RS-232 for equipment-to-console or controller-to-peripheral links. Four driver channels allow one package to handle several command or status lines, while the 14-SOIC surface-mount format supports compact assemblies. Its specified 0°C to +75°C operating range must remain within the enclosure temperature envelope. For installations exposed to long cables or industrial transients, add the protection required by the cable environment rather than relying on the IC alone.

🖥️

Data Terminal Equipment Interfaces

The MC1488DR2 was designed for data-terminal equipment and data-communications equipment interfaces using EIA-232D signaling. It can translate four logic-level outputs into four line-driver channels, making it appropriate for older terminals, service equipment, and diagnostic controllers that retain ±15 V interface rails. The zero-receiver architecture makes the part more specialized than an RS-232 transceiver. System partitioning should therefore place a suitable receiver on inbound signals and keep ground and cable routing within the intended interface topology.

🔧

Embedded Control Panels

A control panel built around an older processor or controller can use the MC1488DR2 to produce four RS-232 command outputs for a connected instrument. The 14-SOIC package reduces board area compared with a through-hole MC1488N implementation, although the obsolete lifecycle status makes long-term availability a central planning concern. Verify the controller’s logic levels and the panel’s ±15 V supply arrangement. Use the manufacturer pin table to prevent confusion between driver-enable, supply, ground, and output assignments.

🔧

Test and Measurement Systems

The MC1488DR2 can drive RS-232 control and measurement signals in legacy test systems that require four one-way driver channels. Its EIA-232D-oriented architecture and typical ±10 mA current-limited output align with established RS-232 equipment interfaces. The part is not a receiver, so a complete test port needs separate receive circuitry. Before inserting it into a mixed-instrument rack, compare supply rails, logic thresholds, output levels, and connector assignments against the original circuit and the TI DS14C88M/NOPB or SN75188DR datasheets when considering alternatives.

⚡

RS-232 Signal Expansion

The MC1488DR2 can expand four outbound RS-232 signals when a controller already uses another interface IC for receive functions. This arrangement preserves separate driver and receiver blocks and avoids placing unrelated circuitry on unused channels. Because its output current is approximately ±10 mA typical, designers should confirm that connected receivers and cable loading remain within the device’s limits. The 14-SOIC footprint also makes it practical for compact interface cards, subject to the MC1488DR2’s obsolete status and current sourcing conditions.

Where can I buy the MC1488DR2?
The MC1488DR2 can be requested through the Request a Quote form on this page. The part is listed as obsolete, so availability may depend on remaining manufacturer or authorized inventory. Buyers should state the required quantity, package variant, and target delivery date when requesting a quotation.
What is the price of the MC1488DR2?
The current MC1488DR2 quotation is handled through the Request a Quote form on this page. Because MC1488DR2 is identified as obsolete and no qualifying exact-MPN quantity-break schedule is shown, a fixed unit-price table would not reflect current inventory. Submit the required quantity and target date for a current offer.
What is the lead time for MC1488DR2?
Lead time for the MC1488DR2 depends on remaining inventory because the device is identified as obsolete. Use the Request a Quote form on this page to state your required quantity and scheduled delivery date. For maintenance programs, include the original equipment build quantity to help evaluate practical supply options.
Is the MC1488DR2 in stock?
The MC1488DR2 is an obsolete quad RS-232 driver, so stock should not be assumed from the existence of a product listing. Request a current availability confirmation through the Request a Quote form on this page. Include your required quantity, acceptable date, and whether the 14-SOIC packaging variant is mandatory.
What are the key specifications of the MC1488DR2 that engineers should know?
The MC1488DR2 is a four-driver RS-232 interface IC with no receivers, ±15 V supply operation, and approximately ±10 mA typical current-limited outputs. According to the onsemi MC1488 datasheet, it is designed for EIA-232D data-terminal and data-communications interfaces. The device is supplied in a 14-SOIC surface-mount package measuring 3.90 mm wide.
What does the MC1488DR2 do?
The MC1488DR2 converts four logic-level signals into RS-232 line-driver outputs for communication and control interfaces. It contains four independent drivers and no receiver channels, allowing one package to drive multiple RS-232 signals. The onsemi MC1488 datasheet identifies the device as an EIA-232D-compatible monolithic quad line driver.
What is the difference between the MC1488DR2 and MC1488N?
The MC1488DR2 is the 14-SOIC surface-mount ordering option, while the MC1488N is the through-hole ordering option shown in comparison listings. Their core function is the same: a four-channel RS-232 driver with no integrated receivers. A PCB already designed for MC1488DR2 should use the SOIC footprint rather than the MC1488N through-hole footprint.
MC1488DR2 vs DS14C88M/NOPB - which is better for a legacy RS-232 design?
The DS14C88M/NOPB is a 14-pin SOIC quad RS-232 transmitter specified for a 4.5 V to 12.6 V supply range, while the MC1488DR2 is identified as a ±15 V quad driver. The DS14C88M/NOPB may fit a single-supply redesign, but a true replacement still requires confirmation of every pin, enable threshold, output level, and external load.
What is the difference between the MC1488DR2 and SN75188DR?
The MC1488DR2 and SN75188DR are both 14-pin SOIC quad RS-232 driver candidates, but the manufacturer datasheets specify different electrical characteristics. The MC1488 uses ±15 V operation and typical ±10 mA current-limited outputs. According to the onsemi datasheet, the MC1488 was designed to meet EIA-232D; review both datasheets before substituting because electrical differences can affect noise and load behavior.
When should I choose the MC1488DR2 over the DS14C88M/NOPB?
Choose the MC1488DR2 only when maintaining an existing ±15 V RS-232 circuit and preserving its established pin behavior is more important than redesigning around a newer single-supply architecture. The DS14C88M/NOPB is listed as a 4.5 V to 12.6 V quad transmitter in a 14-pin SOIC package, so it can suit a redesigned rail, but it should not be treated as an automatic electrical equivalent.
Is the MC1488DR2 suitable for industrial control systems?
The MC1488DR2 can suit legacy industrial control equipment when the system already operates its interface from ±15 V and needs four RS-232 driver outputs. Its listed operating range is 0°C to +75°C, so it may not meet wider industrial-temperature requirements. Confirm enclosure temperature, transient protection, and regulatory needs for the complete equipment.
What can replace the MC1488DR2?
The closest documented candidates are the Texas Instruments DS14C88M/NOPB and SN75188DR, both listed as 14-pin SOIC quad RS-232 devices. Neither should be installed solely because the package matches. Verify the complete pin description, supply range, input thresholds, output voltage, current limiting, and propagation behavior against the original design and manufacturer datasheet.
What is the best Texas Instruments equivalent for the MC1488DR2?
The DS14C88M/NOPB is a Texas Instruments 14-pin SOIC quad RS-232 transmitter identified as a possible replacement for the MC1488DR2. However, its listed 4.5 V to 12.6 V supply range differs from the MC1488DR2’s ±15 V operating condition. Use it as a redesign candidate only after checking every electrical and functional pin.
Where can I download the MC1488DR2 datasheet PDF?
The manufacturer MC1488 datasheet is available from onsemi through the datasheet link on this page. It covers the monolithic quad line driver and includes the device information needed to locate the MC1488 family ordering information. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks and supply connections.
Where is the MC1488DR2 pinout located?
The MC1488DR2 pin assignment is located in the manufacturer MC1488 datasheet. Because the DR2 ordering code shares the MC1488 family documentation, use the package drawing and pin-description table that correspond to the 14-SOIC outline. Confirm physical pin numbering against the actual package marking before fabrication.
How should the MC1488DR2 be supplied and decoupled?
The MC1488DR2 requires positive and negative supply rails and should be decoupled close to its supply pins with the capacitance specified by the manufacturer application guidance. Keep the positive and negative return paths compact and connect decoupling returns to the same low-impedance ground structure. Observe supply limits and absolute maximum conditions before energizing the circuit.

工程參考資料,適用於 MC1488DR2 — 比較、設計指引及合規資訊。

選型指南

Choose the MC1488DR2 when maintaining an existing equipment design that uses four RS-232 driver outputs, a 14-SOIC footprint, and ±15 V supply rails. Its obsolete status makes it primarily a maintenance-oriented choice unless a suitable supply channel can support the required service life. The DS14C88M/NOPB is worth considering for a redesigned interface because its listed 4.5 V to 12.6 V supply range may simplify the power architecture, but it is not automatically interchangeable. The SN75188DR is another 14-SOIC quad-driver candidate, although its complete electrical characteristics must be checked against the MC1488 datasheet. For bidirectional links, add a separate receiver such as an MC1489-family device. Avoid selecting a transceiver solely by package count; verify enable-pin behavior, logic thresholds, output levels, current limits, and absolute maximum ratings before approving any replacement.

與替代品比較

參數 本產品 DS14C88M/NOPB SN75188DR
Brand onsemi Texas Instruments Texas Instruments
Package 14-SOIC 14-SOIC - same package 14-SOIC - same package
Device Type Quad RS-232 line driver Quad RS-232 transmitter Quad RS-232 driver
Number of Drivers 4 drivers 4 drivers 4 drivers

主要差異化特點

  • Direct maintenance continuity for established ±15 V interfaces (對比DS14C88M/NOPB)
  • Dedicated four-driver implementation (對比SN75188DR)
  • Surface-mount 14-SOIC implementation (對比MC1488N)

設計說明

The MC1488DR2 operates from positive and negative rails identified as ±15 V. Confirm both rail magnitudes and polarity against the manufacturer datasheet before connecting power. Keep the supply and ground return paths short, place the required bypass capacitors close to the device, and ensure that startup and shutdown sequencing does not exceed the absolute maximum conditions.

Use the 14-SOIC land pattern and follow the package drawing, pad dimensions, and reflow guidance in the manufacturer documentation. Verify the physical pin-1 orientation on the assembled board rather than relying only on the top marking. Because the device is obsolete, capture the final pin mapping and package details in the production documentation to protect maintenance builds.

Do not substitute a four-transceiver IC for the MC1488DR2 without checking the full pin arrangement; the target contains four drivers and no receivers. Likewise, a matching 14-SOIC package does not prove that supply thresholds or output levels are identical. Compare the MC1488 datasheet with the candidate datasheet for enable inputs, logic thresholds, output current, and absolute maximum ratings.

RS-232 interfaces connected by cables can pick up noise and transients, so route the driver outputs away from sensitive analog and clock paths. Use a defined reference-ground connection and consider appropriate series impedance or protection at the connector when the cable environment requires it. The MC1488’s typical ±10 mA output current is a key parameter to check against the receiver and protection network.

The listed operating-temperature range is 0°C to +75°C. Place the device away from concentrated heat sources and account for PCB copper, enclosure temperature, and nearby regulators when evaluating an industrial installation. If the required ambient range extends outside the specified interval, choose a suitably rated interface solution rather than treating the obsolete MC1488DR2 as an unrestricted industrial part.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The manufacturer datasheet identifies EIA-232D interface use, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified. AEC-Q100 is not applicable to this legacy communications interface device.

相關搜尋

MC1488DR2 datasheet MC1488DR2 datasheet pdf MC1488DR2 pinout MC1488DR2 SOIC-14 footprint MC1488DR2 RS-232 driver MC1488DR2 equivalent MC1488DR2 replacement MC1488DR2 vs DS14C88M/NOPB MC1488DR2 vs SN75188DR onsemi MC1488DR2 MC1488DR2 price MC1488DR2 stock MC1488DR2 legacy RS-232 interface MC1488DR2 supply voltage MC1488DR2 application circuit

相關元件與詞彙

onsemi MC1488DR2 MC1488 MC1488N DS14C88M/NOPB SN75188DR MC1489NE4 MC1489NG4 RS-232 EIA-232D line driver RS-232 transmitter interface IC communications IC semiconductor TTL CMOS 14-SOIC SOIC package family surface-mount technology SMD current limiting positive and negative supply rails data terminal equipment data communications equipment
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情