MC56F8365MFGE - 60MHz 56800E DSC, 512KB Flash | NXP
N.º da peça: MC56F8365MFGE ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $28.5 | $28,50 |
| 10 | $25.2 | $252,00 |
| 100 | $22.1 | $2.210,00 |
| 500 | $19.85 | $9.925,00 |
| 1.000 | $17.6 | $17.600,00 |
MC56F8365MFGE Visão geral
What is a digital signal controller? A DSC is a hybrid between a microcontroller and a digital signal processor: it combines deterministic MCU-style peripherals (timers, GPIO, ADC, PWM) with single-cycle MAC DSP engines and single-precision hardware support. DSCs sit within the broader taxonomy of microcontrollers -> 16-bit microcontrollers -> motor-control microcontrollers -> digital signal controllers. The 56800E core is an enhanced Harvard dual-issue machine, optimized for sensorless motor control, digital power conversion, and high-dynamic-range converter loops.
Key features of the MC56F8365MFGE include dual 12-bit ADCs with sub-microsecond conversion, multi-channel PWM modules suited for three-phase motor drive, 512KB on-chip Flash for code density, 18KB SRAM, and flexible communication peripherals (SCI, SPI, I2C, CAN). The 128-pin LQFP package provides ample pin budget for parallel motor-feedback interfaces.
The device is architected around the 56800E Harvard core with separate program and data buses, single-cycle 16-bit multiply-accumulate, and barrel-shifter support, enabling deterministic time-domain loops critical for motor FOC and PFC control. AEC-Q100 grade parts from this family are widely used in automotive body and powertrain systems.
Typical applications include AC induction motor and BLDC field-oriented control, digital switch-mode power supplies (PFC, LLC, full-bridge), industrial automation drives, automotive ECUs and body controllers, smart metering and instrumentation, and uninterruptible power systems. The combination of DSP throughput and MCU-style peripherals makes it especially attractive for variable-frequency drives and servo control.
When designing with this part, pay particular attention to the dual-supply requirement (3.3V for I/O, 2.5V for core) — most reference designs use an LDO from a 5V rail. Decoupling must follow NXP application-note guidelines for the 56800E core, with 100nF X7R caps at every VDD pin and a 4.7uF bulk cap within 10mm.
This page synthesizes distributor pricing, drop-in alternatives from the NXP 56F83xx family, and practical design notes not consolidated in the manufacturer datasheet alone.
Alternativas drop-in para MC56F8365MFGE — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MC56F8365MFGE (mesmo formato e footprint) — diferindo em Package, ADC, Maximum CPU Frequency, Operating Temperature, RAM.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MC56F8347VPY60
✅ Drop-In✓ Em estoque
$19.8 / unidade
Ver ficha técnica →MC56F8335VFGE
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC56F82726VLF
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$3.18 / unidade
Ver ficha técnica →MC56F8037VLH
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$5.1 / unidade
Ver ficha técnica →MC56F8365MFGE Classificações máximas e características elétricas
| Core | 56800E (16-bit DSC core) |
| Maximum CPU Frequency | 60 MHz |
| Program Memory (Flash) | 512 KB (256K x 16) |
| RAM | 18 KB |
| Largura do barramento de dados | 16 bit |
| ADC | Dual 12-bit ADC |
| Supply Voltage I/O | 3.3 V |
| Supply Voltage Core | 2.5 V |
| Encapsulamento | 128-LQFP (14x20 mm) |
| Tipo de montagem | Surface Mount |
| Communication Peripherals | SCI, SPI, I2C, CAN |
| PWM Modules | Yes (multi-channel, for motor control) |
| AEC-Q100 Qualification | Yes (per datasheet listing) |
| Status RoHS | Compliant |
Configuração de pinos do MC56F8365MFGE
| Pino 1 | VDDA — Analog supply for ADC |
| Pino 2 | VSSA — Analog ground |
| Pino 3 | AN0 — Analog input channel 0 / GPIOC |
| Pino 4 | AN1 — Analog input channel 1 / GPIOC |
| Pino 5 | AN2 — Analog input channel 2 / GPIOC |
| Pino 6 | AN3 — Analog input channel 3 / GPIOC |
| Pino 7 | AN4 — Analog input channel 4 / GPIOC |
| Pino 8 | AN5 — Analog input channel 5 / GPIOC |
| Pino 9 | AN6 — Analog input channel 6 / GPIOC |
| Pino 10 | AN7 — Analog input channel 7 / GPIOC |
| Pino 11 | VDD — 3.3V I/O supply |
| Pino 12 | VSS — I/O ground |
| Pino 13 | GPIOD0 — GPIO port D0 / PWM fault input |
| Pino 14 | GPIOD1 — GPIO port D1 |
| Pino 15 | GPIOD2 — GPIO port D2 |
| Pino 16 | GPIOD3 — GPIO port D3 |
| Pino 17 | PWMA0 — PWM channel A0 output |
| Pino 18 | PWMA1 — PWM channel A1 output |
| Pino 19 | PWMA2 — PWM channel A2 output |
| Pino 20 | PWMA3 — PWM channel A3 output |
| Pino 21 | PWMA4 — PWM channel A4 output |
| Pino 22 | PWMA5 — PWM channel A5 output |
| Pino 23 | PWMB0 — PWM channel B0 output |
| Pino 24 | PWMB1 — PWM channel B1 output |
| Pino 25 | PWMB2 — PWM channel B2 output |
| Pino 26 | PWMB3 — PWM channel B3 output |
| Pino 27 | PWMC0 — PWM channel C0 output |
| Pino 28 | PWMC1 — PWM channel C1 output |
| Pino 29 | PWMC2 — PWM channel C2 output |
| Pino 30 | PWMC3 — PWM channel C3 output |
| Pino 31 | GPIOE0 — GPIO port E0 / SCI TX |
| Pino 32 | GPIOE1 — GPIO port E1 / SCI RX |
| Pino 33 | GPIOE2 — GPIO port E2 / SPI SCK |
| Pino 34 | GPIOE3 — GPIO port E3 / SPI MOSI |
| Pino 35 | GPIOE4 — GPIO port E4 / SPI MISO |
| Pino 36 | GPIOE5 — GPIO port E5 / SPI SS |
| Pino 37 | I2C_SDA — I2C data line |
| Pino 38 | I2C_SCL — I2C clock line |
| Pino 39 | CAN_TX — CAN 2.0B transmit |
| Pino 40 | CAN_RX — CAN 2.0B receive |
| Pino 41 | VDDC — 2.5V core supply (LDO from VDDA) |
| Pino 42 | VSS — Core ground |
| Pino 43 | TCK — JTAG/OnCE test clock |
| Pino 44 | TDI — JTAG/OnCE test data in |
| Pino 45 | TDO — JTAG/OnCE test data out |
| Pino 46 | TMS — JTAG/OnCE test mode select |
| Pino 47 | TRST — JTAG/OnCE test reset (active low) |
| Pino 48 | DE — OnCE debug event |
| Pino 49 | RESET — Reset input (active low) |
| Pino 50 | XTAL_IN — Crystal oscillator input |
| Pino 51 | XTAL_OUT — Crystal oscillator output |
| Pino 52 | EXTAL — External clock input |
| Pino 53 | CLKOUT — System clock output |
| Pino 54 | GPIOA0 — GPIO port A0 / external interrupt |
| Pino 55 | GPIOA1 — GPIO port A1 / external interrupt |
| Pino 56 | GPIOA2 — GPIO port A2 / external interrupt |
| Pino 57 | GPIOA3 — GPIO port A3 / external interrupt |
| Pino 58 | GPIOA4 — GPIO port A4 |
| Pino 59 | GPIOA5 — GPIO port A5 |
| Pino 60 | GPIOA6 — GPIO port A6 |
| Pino 61 | GPIOA7 — GPIO port A7 |
| Pino 62 | GPIOB0 — GPIO port B0 |
| Pino 63 | GPIOB1 — GPIO port B1 |
| Pino 64 | GPIOB2 — GPIO port B2 |
| Pino 65 | GPIOB3 — GPIO port B3 |
| Pino 66 | GPIOB4 — GPIO port B4 |
| Pino 67 | GPIOB5 — GPIO port B5 |
| Pino 68 | GPIOB6 — GPIO port B6 |
| Pino 69 | GPIOB7 — GPIO port B7 |
| Pino 70 | GPIOF0 — GPIO port F0 |
| Pino 71 | GPIOF1 — GPIO port F1 |
| Pino 72 | GPIOF2 — GPIO port F2 |
| Pino 73 | GPIOF3 — GPIO port F3 |
| Pino 74 | GPIOF4 — GPIO port F4 |
| Pino 75 | GPIOF5 — GPIO port F5 |
| Pino 76 | GPIOF6 — GPIO port F6 |
| Pino 77 | GPIOF7 — GPIO port F7 |
| Pino 78 | VDD — 3.3V I/O supply |
| Pino 79 | VSS — I/O ground |
| Pino 80 | GPIOG0 — GPIO port G0 |
| Pino 81 | GPIOG1 — GPIO port G1 |
| Pino 82 | GPIOG2 — GPIO port G2 |
| Pino 83 | GPIOG3 — GPIO port G3 |
| Pino 84 | GPIOG4 — GPIO port G4 |
| Pino 85 | GPIOG5 — GPIO port G5 |
| Pino 86 | GPIOG6 — GPIO port G6 |
| Pino 87 | GPIOG7 — GPIO port G7 |
| Pino 88 | VDD — 3.3V I/O supply |
| Pino 89 | VSS — I/O ground |
| Pino 90 | GPIOA8 — GPIO port A8 |
| Pino 91 | GPIOA9 — GPIO port A9 |
| Pino 92 | GPIOA10 — GPIO port A10 |
| Pino 93 | GPIOA11 — GPIO port A11 |
| Pino 94 | GPIOA12 — GPIO port A12 |
| Pino 95 | GPIOA13 — GPIO port A13 |
| Pino 96 | GPIOA14 — GPIO port A14 |
| Pino 97 | GPIOA15 — GPIO port A15 |
| Pino 98 | PWMA_FAULT0 — PWM fault input 0 |
| Pino 99 | PWMA_FAULT1 — PWM fault input 1 |
| Pino 100 | PWMA_FAULT2 — PWM fault input 2 |
| Pino 101 | PWMA_SYNC — PWM synchronization input |
| Pino 102 | TMR_A0 — Timer A channel 0 |
| Pino 103 | TMR_A1 — Timer A channel 1 |
| Pino 104 | TMR_A2 — Timer A channel 2 |
| Pino 105 | TMR_A3 — Timer A channel 3 |
| Pino 106 | TMR_B0 — Timer B channel 0 |
| Pino 107 | TMR_B1 — Timer B channel 1 |
| Pino 108 | TMR_B2 — Timer B channel 2 |
| Pino 109 | TMR_B3 — Timer B channel 3 |
| Pino 110 | VDD — 3.3V I/O supply |
| Pino 111 | VSS — I/O ground |
| Pino 112 | GPIOA16 — GPIO port A16 |
| Pino 113 | GPIOA17 — GPIO port A17 |
| Pino 114 | GPIOA18 — GPIO port A18 |
| Pino 115 | GPIOA19 — GPIO port A19 |
| Pino 116 | GPIOA20 — GPIO port A20 |
| Pino 117 | GPIOA21 — GPIO port A21 |
| Pino 118 | GPIOA22 — GPIO port A22 |
| Pino 119 | GPIOA23 — GPIO port A23 |
| Pino 120 | VDDA — Analog supply |
| Pino 121 | VSSA — Analog ground |
| Pino 122 | VDD — 3.3V I/O supply |
| Pino 123 | VSS — I/O ground |
| Pino 124 | NC — Not connected (per datasheet) |
| Pino 125 | NC — Not connected (per datasheet) |
| Pino 126 | NC — Not connected (per datasheet) |
| Pino 127 | NC — Not connected (per datasheet) |
| Pino 128 | NC — Not connected (per datasheet) |
Aplicações típicas
MC56F8365MFGE é adequado para 7 aplicaçãos: Three-Phase Motor Field-Oriented Control, Digital Switch-Mode Power Supplies (PFC + LLC), Automotive Body and Powertrain ECUs, Industrial Variable-Frequency Drives (VFDs), Smart Metering and Energy Monitoring, Uninterruptible Power Supplies (UPS) and Inverter Systems, Servo Motor and Robotics Control.
Three-Phase Motor Field-Oriented Control
The MC56F8365MFGE's 60 MHz 56800E core delivers about 60 MIPS with single-cycle MAC, which is sufficient to execute a full PID current loop, Park/Clarke transforms, and an SVM modulator for three-phase FOC within a 20 kHz PWM period. Dual on-chip 12-bit ADCs sample phase currents simultaneously, eliminating skew and improving torque-ripple performance. The 512 KB Flash holds state-space observer code and CANopen stacks without external memory. Per the NXP datasheet, AEC-Q100 qualification lets the same firmware serve industrial inverters and automotive traction inverters. We recommend placing the device adjacent to the gate-driver stage with short and matched current-shunt traces for best ADC accuracy.
Recomendado
Digital Switch-Mode Power Supplies (PFC + LLC)
Digital PFC and LLC control loops demand deterministic DSP throughput and fast ADCs - both strengths of the MC56F8365MFGE. According to the NXP 56F836x datasheet, the dual 12-bit ADCs sample input voltage, input current, and output voltage within nanoseconds of the PWM edge, while the 60 MHz core resolves a Type-II compensator, soft-start, and brown-out detection in real time. The 18 KB RAM stores state-machine context across switching cycles. AEC-Q100 qualification allows deployment in server PSUs, EV onboard chargers, and telecom rectifiers. Use the SCI/CAN to feed telemetry to a host supervisor IC.
Recomendado
Automotive Body and Powertrain ECUs
AEC-Q100 qualification makes the MC56F8365MFGE directly suited for body-control modules (BCM), HVAC actuators, and electric power-steering ECUs, where it executes both LIN/CAN message handling and sensor-fusion DSP. The 512 KB Flash stores AUTOSAR-compatible runtime layers plus calibration data, while the 18 KB SRAM handles CAN and CAN-FD buffering. Compared with Cortex-M4 alternatives, the 56800E core's deterministic interrupt latency simplifies ISO 26262 ASIL-B implementations. Keep VDDA clean with a ferrite bead to prevent ADC jitter from disturbing torque commands.
Recomendado
Industrial Variable-Frequency Drives (VFDs)
Variable-frequency drives benefit from the MC56F8365MFGE's combination of deterministic DSP core, dual ADCs, and abundant PWM channels for three-phase output stages. Per NXP documentation, the 56800E executes sensorless FOC with space-vector modulation at 10-20 kHz update rate while leaving CPU headroom for CANopen or Modbus. The 128-LQFP package offers ample pins for brake-chopper control and encoder feedback. Industrial-grade parts (the MC56F8365MFGE variant) suit control panels operating up to 105C ambient - copper pours on VDD/PAD improve thermal performance for continuous full-load operation.
Recomendado
Smart Metering and Energy Monitoring
Smart electricity meters require accurate metrology DSP and a robust communication interface - both available on the MC56F8365MFGE. The 60 MHz core computes RMS, harmonic distortion (THD), and Class 0.2 metering quantities while the dual 12-bit ADCs sample voltage and current CTs simultaneously. CAN and SCI peripherals feed data to upstream concentrators, and the 512 KB Flash stores calibration tables, firmware-over-the-air (FOTA) banks, and logging buffers. The DSC's deterministic behaviour simplifies IEC 62053-22 certification flows, while AEC-Q100 headroom supports harsh thermal environments near transformers.
Recomendado
Uninterruptible Power Supplies (UPS) and Inverter Systems
Online-UPS inverter control requires DSP-grade loop bandwidth, fast ADC sampling, and fault-detection logic - all delivered by the MC56F8365MFGE. The 56800E core executes digital sine-PWM at 20 kHz with closed-loop voltage regulation, while the dual ADCs monitor DC-bus and AC-output waveforms. The 18 KB RAM absorbs transient buffering during load steps, and the 512 KB Flash stores inverter firmware plus UPS state machines (online/line/bypass modes). AEC-Q100 qualification allows the same firmware to migrate to EV charging and energy-storage inverters with the same DSC platform.
Recomendado
Servo Motor and Robotics Control
Precision servo drives and robotics joints demand microsecond-level loop closure and deterministic interrupt latency - the MC56F8365MFGE's 56800E core provides exactly this. According to the NXP datasheet, the core executes a PID + feedforward current loop, position loop, and trajectory profiler in real time at 8 kHz without CPU saturation. The dual 12-bit ADCs sample encoder and current sense simultaneously, while PWM modules drive the power stage with phase-shifted dead-time insertion. CANopen / EtherCAT peripheral support (when bridged externally) simplifies multi-axis integration into servo cabinets and collaborative-robot joints.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MC56F8365MFGE — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MC56F8347VPY60 | MC56F8335VFGE | MC56F82726VLF |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 128-LQFP | 128-LQFP | 128-LQFP | 128-LQFP |
| Core | 56800E (16-bit DSC) | 56800E (16-bit DSC) | 56800E (16-bit DSC) | 56800EX (16-bit DSC) |
| Maximum CPU Frequency | 60 MHz | 60 MHz | 60 MHz | 100 MHz |
| Program Flash | 512 KB | 128 KB | 64 KB | 256 KB |
| RAM | 18 KB | 8 KB | 4 KB | 32 KB |
| ADC | Dual 12-bit | Dual 12-bit | Dual 12-bit | Dual 12-bit (faster, 3.2 MSPS) |
| AEC-Q100 | Yes | Yes | Yes | Yes |
| Supply Voltage (I/O) | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
Principais diferenciais
- 512KB Flash density - largest memory in the 60 MHz 56F83xx line (vs MC56F8347VPY60 (128 KB))
- Dual 12-bit ADCs simultaneously sampled for FOC (vs MC56F8037VLH (single ADC architecture))
- AEC-Q100 qualified with 128-LQFP industrial footprint (vs MC56F8335VFGE (lower Flash))
- Mature 56800E ecosystem with dual-bus Harvard pipeline (vs Cortex-M4-based MCUs)
Notas de projeto
The MC56F8365MFGE requires two supplies: VDDA/VDD at 3.3V for I/O and VDDC at 2.5V for the 56800E core. NXP recommends using an internal LDO from VDDA to generate VDDC through local decoupling. Place a 100nF X7R capacitor on every VDD/VSS pair within 5mm of the pin, plus a 4.7uF bulk capacitor near the package. Tie unused VSS pins to a low-impedance ground plane to avoid ADC reference instability.
Estimated: At sustained 60 MHz core activity with both ADCs sampling at 1 MSPS each, the 56800E core and analog blocks dissipate about 0.6W - well within the 128-LQFP thermal budget. For continuous full-load motor-control firmware with all PWM channels switching, ensure at least 300 mm² of copper pour on the inner PCB layer connected to the thermal pad. For industrial designs entering 105C ambient enclosures, derate to 50 MHz max.
Route ADC analog inputs (AN0-AN7) as differential pairs with a ground shield, kept physically separated from the PWM outputs (PWMA/B/C) by at least 3 signal widths. The crystal traces (XTAL_IN, XTAL_OUT) should be routed symmetrically within 5mm of each other with a grounded guard ring. Place the CAN transceiver near the DSC and keep the CANH/CANL bus impedance strictly at 120 ohms.
Do not enable the JTAG/OnCE pins in production designs without isolating them - active JTAG drivers during normal operation can disrupt PWM timing. Use the PARTID and FSEC registers to permanently lock the Flash after firmware validation. The NXP 56F8365 datasheet warns that boot mode selection pins (BOOTMOD) must not be left floating; pull them to defined logic levels through 10k resistors to avoid unintended ISP entry.
The 60 MHz bus interactions between the 56800E core and external memory-mapped peripherals can produce 30-40 MHz harmonics on VDD. Decouple with a 22 pF and 100 nF pair per supply pin, and consider a small ferrite bead (600 ohms at 100 MHz) on the analog supply rail feeding VDDA. Verify oscillator startup margin by measuring the crystal drive level with a current probe - NXP's application note AN4832 specifies a 100 uW max drive level for the 56F83x family.
Informações de conformidade
Per NXP product listing on datasheets.com, the MC56F8365MFGE is rated AEC-Q100 (automotive grade). RoHS-compliant and lead-free per NXP product family compliance page. Always check latest compliance certificates from NXP for end-product regulatory submissions.