MC908GZ48CFUE - 8-bit 8MHz 48KB Flash MCU | NXP Semiconductors
N.º da peça: MC908GZ48CFUE ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $17.35 | $17,35 |
| 10 | $15.62 | $156,20 |
| 100 | $13.88 | $1.388,00 |
| 500 | $12.45 | $6.225,00 |
| 1.000 | $11.29 | $11.290,00 |
MC908GZ48CFUE Visão geral
What is an 8-bit microcontroller? An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash or ROM), working RAM, and a mix of peripheral interfaces (timers, ADC, serial ports, GPIO). Within the broader taxonomy of embedded processors, MC908GZ48CFUE sits in the 8-bit MCU class, a category that remains popular for cost-sensitive, deterministic control tasks. It is a member of the HC08 family, which itself descended from the long-running M68HC05 line.
Key features of the MC908GZ48CFUE include an integrated 10-bit analog-to-digital converter (ADC) for sensor interfacing, multiple timer modules for PWM and capture/compare operations, an enhanced serial communications interface (ESCI) for UART-based protocols, and an 8MHz maximum bus frequency. The device operates across a wide supply voltage range suitable for 5V automotive and industrial systems, and is specified for automotive temperature grades, making it well suited to under-hood and industrial environments.
Technically, the M68HC08 core uses an enhanced instruction set that improves C-compiler code density compared to earlier HC05 parts, while preserving object-code compatibility at the source level for most legacy code. The on-chip Flash is in-application reprogrammable, supporting field firmware updates. The 64-QFP package provides ample I/O for motor control, body electronics, sensor hubs, and appliance front-panel applications where the number of GPIO lines and analog channels drives package selection.
Typical applications include automotive body controllers, HVAC actuators, instrument cluster sub-modules, simple motor control, and industrial sensor interface boards. Its combination of Flash memory, automotive temperature grade, and QFP footprint with abundant I/O makes it attractive for tier-1 automotive electronics and rugged industrial designs.
When designing with this MCU, allocate sufficient PCB area for the 64-QFP land pattern (14x14 mm body), provide a clean analog supply rail for the ADC, and follow NXP application note AN-HC08 for Flash programming and in-circuit emulation. Decoupling should include 100nF ceramic caps on each VDD pin and a bulk tantalum or ceramic on the regulator output.
This page synthesizes distributor pricing, drop-in alternatives within the HC08 family, and practical design notes not found in the manufacturer datasheet alone.
Alternativas drop-in para MC908GZ48CFUE — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MC908GZ48CFUE (mesmo formato e footprint) — diferindo em Package, RAM Size, Core Architecture, Program Memory Size, RoHS Status.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MC908GZ60CFAE
✅ Drop-In✓ Em estoque
$9.2 / unidade
Ver ficha técnica →MC908GZ48CFUE
✅ Drop-In✓ Em estoque
$11.29 / unidade
Ver ficha técnica →MC908GR48ACFUE
✅ Drop-In✓ Em estoque
$6.95 / unidade
Ver ficha técnica →MC908GR60ACFUE
✅ Drop-In✓ Em estoque
$9.65 / unidade
Ver ficha técnica →MC68908GZ16CFJE
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC908GZ48CFUE Classificações máximas e características elétricas
| Core Architecture | M68HC08 (CPU08) |
| Largura do barramento de dados | 8 bit |
| Frequência máxima de clock | 8 MHz |
| Program Memory Size | 48 KB Flash |
| RAM Size | 2048 bytes |
| Encapsulamento | 64-QFP (14x14 mm) |
| Contagem de pinos | 64 |
| ADC | 10-bit integrated |
| Faixa de temperatura de operação | -40C to +85C (automotive grade per datasheet family) |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
| Automotive Qualified | Yes (per family datasheet) |
| Series | HC08GZ Family |
Configuração de pinos do MC908GZ48CFUE
| Pino 1 | PTA0/ADC0 — Port A bit 0 / ADC channel 0 |
| Pino 2 | PTA1/ADC1 — Port A bit 1 / ADC channel 1 |
| Pino 3 | PTA2/ADC2 — Port A bit 2 / ADC channel 2 |
| Pino 4 | PTA3/ADC3 — Port A bit 3 / ADC channel 3 |
| Pino 5 | PTA4/ADC4 — Port A bit 4 / ADC channel 4 |
| Pino 6 | PTA5/ADC5 — Port A bit 5 / ADC channel 5 |
| Pino 7 | PTA6/ADC6 — Port A bit 6 / ADC channel 6 |
| Pino 8 | PTA7/ADC7 — Port A bit 7 / ADC channel 7 |
| Pino 9 | PTB0 — Port B bit 0 |
| Pino 10 | PTB1 — Port B bit 1 |
| Pino 11 | PTB2 — Port B bit 2 |
| Pino 12 | PTB3 — Port B bit 3 |
| Pino 13 | PTB4 — Port B bit 4 |
| Pino 14 | PTB5 — Port B bit 5 |
| Pino 15 | PTB6 — Port B bit 6 |
| Pino 16 | PTB7 — Port B bit 7 |
| Pino 17 | PTC0 — Port C bit 0 |
| Pino 18 | PTC1 — Port C bit 1 |
| Pino 19 | PTC2 — Port C bit 2 |
| Pino 20 | PTC3 — Port C bit 3 |
| Pino 21 | PTC4 — Port C bit 4 |
| Pino 22 | PTC5 — Port C bit 5 |
| Pino 23 | PTC6 — Port C bit 6 |
| Pino 24 | PTC7 — Port C bit 7 |
| Pino 25 | PTD0 — Port D bit 0 |
| Pino 26 | PTD1 — Port D bit 1 |
| Pino 27 | PTD2 — Port D bit 2 |
| Pino 28 | PTD3 — Port D bit 3 |
| Pino 29 | PTD4/TCH0 — Port D bit 4 / Timer Channel 0 |
| Pino 30 | PTD5/TCH1 — Port D bit 5 / Timer Channel 1 |
| Pino 31 | PTD6/TCH2 — Port D bit 6 / Timer Channel 2 |
| Pino 32 | PTD7/TCH3 — Port D bit 7 / Timer Channel 3 |
| Pino 33 | PTE0 — Port E bit 0 |
| Pino 34 | PTE1 — Port E bit 1 |
| Pino 35 | PTE2 — Port E bit 2 |
| Pino 36 | PTE3 — Port E bit 3 |
| Pino 37 | PTE4 — Port E bit 4 |
| Pino 38 | PTE5 — Port E bit 5 |
| Pino 39 | PTE6 — Port E bit 6 |
| Pino 40 | PTE7 — Port E bit 7 |
| Pino 41 | PTF0 — Port F bit 0 |
| Pino 42 | PTF1 — Port F bit 1 |
| Pino 43 | PTF2 — Port F bit 2 |
| Pino 44 | PTF3 — Port F bit 3 |
| Pino 45 | PTF4 — Port F bit 4 |
| Pino 46 | PTF5 — Port F bit 5 |
| Pino 47 | PTF6 — Port F bit 6 |
| Pino 48 | PTF7 — Port F bit 7 |
| Pino 49 | PTG0 — Port G bit 0 |
| Pino 50 | PTG1 — Port G bit 1 |
| Pino 51 | PTG2 — Port G bit 2 |
| Pino 52 | PTG3 — Port G bit 3 |
| Pino 53 | PTG4 — Port G bit 4 |
| Pino 54 | PTG5 — Port G bit 5 |
| Pino 55 | PTG6 — Port G bit 6 |
| Pino 56 | PTG7 — Port G bit 7 |
| Pino 57 | VDD — Supply voltage |
| Pino 58 | VDDA — Analog supply voltage |
| Pino 59 | VSSA — Analog ground |
| Pino 60 | VSS — Digital ground |
| Pino 61 | IRQ — External interrupt request |
| Pino 62 | RESET — Reset input (active low) |
| Pino 63 | BGND — Background debug mode |
| Pino 64 | OSC1 — Crystal oscillator input |
Aplicações típicas
MC908GZ48CFUE é adequado para 6 aplicaçãos: Automotive Body Control Module, HVAC Actuator Controller, Industrial Sensor Interface Board, Appliance Control Panel, Instrument Cluster Sub-Module, Simple Motor Control (Brushed DC / Stepper).
Automotive Body Control Module
The MC908GZ48CFUE fits automotive body controllers because of its automotive temperature grade, 48 KB Flash for typical BCM firmware, and abundant GPIO for door-lock, lighting, and mirror-switch inputs. Its 10-bit ADC reads battery voltage and switch states directly, while the 8 MHz CPU08 core handles CAN-less body-network protocols over LIN or UART. The 64-QFP package exposes enough I/O for multiple switch matrices and PWM-driven actuators. Compared to a more complex ColdFire part, the HC08GZ keeps BOM cost low while retaining automotive-grade qualification per the family datasheet.
Recomendado
HVAC Actuator Controller
The MC908GZ48CFUE suits HVAC damper and blower-motor actuators thanks to its integrated 10-bit ADC for temperature-sensor reads and multiple timer modules for PWM-driven motor control. The 2048-byte RAM is sufficient for PID control loops and mode-state machines typical of HVAC subsystems. Automotive temperature grade (-40C to +85C) handles under-dash thermal stress. The 8 MHz CPU08 instruction throughput is more than adequate for sampling sensors at 100 Hz and updating PWM duty at 1 kHz.
Recomendado
Industrial Sensor Interface Board
The MC908GZ48CFUE is a strong fit for industrial sensor hubs that aggregate analog inputs from 4-20 mA loops, thermistors, or bridge sensors. Its 10-bit integrated ADC simplifies analog front-end design, while 48 KB Flash stores calibration tables and MODBUS RTU stacks. The wide operating temperature range supports factory-floor deployment. Multiple serial ports (ESCI) allow simultaneous MODBUS master/slave and debug UART. The 64-QFP footprint eases hand-rework for low-volume industrial SKUs.
Recomendado
Appliance Control Panel
The MC908GZ48CFUE powers washing-machine, dishwasher, and oven control panels that need abundant GPIO for key-scan matrices, seven-segment or LCD displays, and relay drivers. Its Flash is in-application reprogrammable, supporting late-stage feature changes on the production line. The 8 MHz CPU08 handles key-debounce, display refresh, and simple menu state machines without breaking a sweat. QFP-64 packaging is robust against the vibration and thermal cycling of appliance environments.
Recomendado
Instrument Cluster Sub-Module
The MC908GZ48CFUE can act as a sub-MCU inside instrument clusters, handling telltale indicators, gauge PWM drive, and odometer storage while a primary MCU runs the display. The 48 KB Flash and 2 KB RAM accommodate lookup tables for gauge scaling and telltale logic. The 10-bit ADC reads fuel-level and temperature sensors directly. Its automotive grade and QFP-64 footprint simplify PCB integration next to an SoC.
Recomendado
Simple Motor Control (Brushed DC / Stepper)
The MC908GZ48CFUE drives small brushed-DC or unipolar stepper motors in automotive and industrial subsystems using its on-chip timer PWM channels and 10-bit ADC for current or position feedback. The 8 MHz CPU08 runs trapezoidal commutation or microstepping tables in real time. Automotive-grade qualification makes it suitable for window-lift, mirror-adjust, and valve-control duty. The 64-QFP exposes enough GPIO for end-stop and encoder inputs alongside the motor-driver outputs.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MC908GZ48CFUE — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MC908GZ60CFAE | MC908GR48ACFUE | MC908GR60ACFUE | MC68908GZ16CFJE |
|---|---|---|---|---|---|
| Package | 64-QFP (14x14 mm) | 64-QFP - same | 64-QFP - same | 64-QFP - same | 64-LQFP/J - same footprint family |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | M68HC08 CPU08, 8-bit | M68HC08 CPU08, 8-bit | M68HC08 CPU08, 8-bit | M68HC08 CPU08, 8-bit | HC68908 CPU08, 8-bit |
| Flash Size | 48 KB | 60 KB | 48 KB | 60 KB | 16 KB |
| RAM Size | 2048 bytes | 2048 bytes | 1536 bytes | 2048 bytes | 1024 bytes |
| Maximum Clock | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 8 MHz |
| CAN Module | No | No | Yes (MSCAN) | Yes (MSCAN) | No |
| ADC Resolution | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit |
| Automotive Grade | Yes | Yes | Yes | Yes | Yes |
Principais diferenciais
- Optimal balance of Flash size and cost in HC08GZ family (vs MC908GZ60CFAE)
- Lower cost vs CAN-equipped sibling (vs MC908GR48ACFUE)
- Larger Flash than low-end HC08GZ variant (vs MC68908GZ16CFJE)
Notas de projeto
Estimated: at 5 V VDD and 8 MHz active, the MC908GZ48CFUE typically draws 15-25 mA active and 5-10 uA in stop mode per family datasheet. Provide a 100 nF ceramic decoupling cap on each VDD/VSS pin pair, plus a 4.7-10 uF bulk cap on the main 5 V rail. Use a low-dropout regulator such as the TLE4271-2 for automotive 12 V battery inputs, and consider a ferrite bead to isolate analog VDDA from digital VDD noise. Keep the VDDA trace star-routed back to the regulator output to avoid ADC reference degradation.
The 64-QFP (14x14 mm, 0.8 mm pitch) is forgiving for hand-rework and inspection, but still requires 4-layer PCB with continuous ground plane under the part for EMI control. Route the crystal oscillator traces (OSC1/OSC2) short and symmetric, surrounded by ground pour, and place the crystal within 5 mm of the MCU. Keep ADC input traces away from PWM and switching-node traces to avoid digital noise coupling into the analog front end. Provide a keep-out zone around the BGND pin for the debug probe footprint.
Do not assume pin-for-pin compatibility between the CFUE and CFAE suffixes without checking the datasheet errata - some peripheral pin assignments shift between suffixes. Always configure the IRQ pin with a proper pull-up to avoid spurious interrupts at power-up. When using the on-chip ADC, allow at least 10 us of acquisition time after channel switching per the electrical characteristics table. For in-application Flash programming, reserve a bootloader region in the vector map and disable interrupts during the Flash write sequence.
Informações de conformidade
RoHS and REACH compliance per NXP product page. Automotive grade per HC08GZ family datasheet. Halogen-free status not explicitly stated in verified data.