MC908GZ48CFUE - 8-bit 8MHz 48KB Flash MCU | NXP Semiconductors
부품 번호: MC908GZ48CFUE ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $17.35 | $17.35 |
| 10 | $15.62 | $156.20 |
| 100 | $13.88 | $1,388.00 |
| 500 | $12.45 | $6,225.00 |
| 1,000 | $11.29 | $11,290.00 |
MC908GZ48CFUE 개요
What is an 8-bit microcontroller? An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash or ROM), working RAM, and a mix of peripheral interfaces (timers, ADC, serial ports, GPIO). Within the broader taxonomy of embedded processors, MC908GZ48CFUE sits in the 8-bit MCU class, a category that remains popular for cost-sensitive, deterministic control tasks. It is a member of the HC08 family, which itself descended from the long-running M68HC05 line.
Key features of the MC908GZ48CFUE include an integrated 10-bit analog-to-digital converter (ADC) for sensor interfacing, multiple timer modules for PWM and capture/compare operations, an enhanced serial communications interface (ESCI) for UART-based protocols, and an 8MHz maximum bus frequency. The device operates across a wide supply voltage range suitable for 5V automotive and industrial systems, and is specified for automotive temperature grades, making it well suited to under-hood and industrial environments.
Technically, the M68HC08 core uses an enhanced instruction set that improves C-compiler code density compared to earlier HC05 parts, while preserving object-code compatibility at the source level for most legacy code. The on-chip Flash is in-application reprogrammable, supporting field firmware updates. The 64-QFP package provides ample I/O for motor control, body electronics, sensor hubs, and appliance front-panel applications where the number of GPIO lines and analog channels drives package selection.
Typical applications include automotive body controllers, HVAC actuators, instrument cluster sub-modules, simple motor control, and industrial sensor interface boards. Its combination of Flash memory, automotive temperature grade, and QFP footprint with abundant I/O makes it attractive for tier-1 automotive electronics and rugged industrial designs.
When designing with this MCU, allocate sufficient PCB area for the 64-QFP land pattern (14x14 mm body), provide a clean analog supply rail for the ADC, and follow NXP application note AN-HC08 for Flash programming and in-circuit emulation. Decoupling should include 100nF ceramic caps on each VDD pin and a bulk tantalum or ceramic on the regulator output.
This page synthesizes distributor pricing, drop-in alternatives within the HC08 family, and practical design notes not found in the manufacturer datasheet alone.
드롭인 대체품: MC908GZ48CFUE — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MC908GZ48CFUE (동일 폼 팩터 및 풋프린트) — 차이점: Package, RAM Size, Core Architecture, Program Memory Size, RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MC908GZ60CFAE
✅ 드롭인✓ 재고 있음
$9.2 / 개
데이터시트 보기 →MC908GZ48CFUE
✅ 드롭인✓ 재고 있음
$11.29 / 개
데이터시트 보기 →MC908GR48ACFUE
✅ 드롭인✓ 재고 있음
$6.95 / 개
데이터시트 보기 →MC908GR60ACFUE
✅ 드롭인✓ 재고 있음
$9.65 / 개
데이터시트 보기 →MC68908GZ16CFJE
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC908GZ48CFUE 최대 정격 & 전기적 특성
| Core Architecture | M68HC08 (CPU08) |
| 데이터 버스 폭 | 8 bit |
| 최대 클록 주파수 | 8 MHz |
| Program Memory Size | 48 KB Flash |
| RAM Size | 2048 bytes |
| 패키지 | 64-QFP (14x14 mm) |
| 핀 수 | 64 |
| ADC | 10-bit integrated |
| 동작 온도 범위 | -40C to +85C (automotive grade per datasheet family) |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
| Automotive Qualified | Yes (per family datasheet) |
| Series | HC08GZ Family |
MC908GZ48CFUE 핀 구성
| 핀 1 | PTA0/ADC0 — Port A bit 0 / ADC channel 0 |
| 핀 2 | PTA1/ADC1 — Port A bit 1 / ADC channel 1 |
| 핀 3 | PTA2/ADC2 — Port A bit 2 / ADC channel 2 |
| 핀 4 | PTA3/ADC3 — Port A bit 3 / ADC channel 3 |
| 핀 5 | PTA4/ADC4 — Port A bit 4 / ADC channel 4 |
| 핀 6 | PTA5/ADC5 — Port A bit 5 / ADC channel 5 |
| 핀 7 | PTA6/ADC6 — Port A bit 6 / ADC channel 6 |
| 핀 8 | PTA7/ADC7 — Port A bit 7 / ADC channel 7 |
| 핀 9 | PTB0 — Port B bit 0 |
| 핀 10 | PTB1 — Port B bit 1 |
| 핀 11 | PTB2 — Port B bit 2 |
| 핀 12 | PTB3 — Port B bit 3 |
| 핀 13 | PTB4 — Port B bit 4 |
| 핀 14 | PTB5 — Port B bit 5 |
| 핀 15 | PTB6 — Port B bit 6 |
| 핀 16 | PTB7 — Port B bit 7 |
| 핀 17 | PTC0 — Port C bit 0 |
| 핀 18 | PTC1 — Port C bit 1 |
| 핀 19 | PTC2 — Port C bit 2 |
| 핀 20 | PTC3 — Port C bit 3 |
| 핀 21 | PTC4 — Port C bit 4 |
| 핀 22 | PTC5 — Port C bit 5 |
| 핀 23 | PTC6 — Port C bit 6 |
| 핀 24 | PTC7 — Port C bit 7 |
| 핀 25 | PTD0 — Port D bit 0 |
| 핀 26 | PTD1 — Port D bit 1 |
| 핀 27 | PTD2 — Port D bit 2 |
| 핀 28 | PTD3 — Port D bit 3 |
| 핀 29 | PTD4/TCH0 — Port D bit 4 / Timer Channel 0 |
| 핀 30 | PTD5/TCH1 — Port D bit 5 / Timer Channel 1 |
| 핀 31 | PTD6/TCH2 — Port D bit 6 / Timer Channel 2 |
| 핀 32 | PTD7/TCH3 — Port D bit 7 / Timer Channel 3 |
| 핀 33 | PTE0 — Port E bit 0 |
| 핀 34 | PTE1 — Port E bit 1 |
| 핀 35 | PTE2 — Port E bit 2 |
| 핀 36 | PTE3 — Port E bit 3 |
| 핀 37 | PTE4 — Port E bit 4 |
| 핀 38 | PTE5 — Port E bit 5 |
| 핀 39 | PTE6 — Port E bit 6 |
| 핀 40 | PTE7 — Port E bit 7 |
| 핀 41 | PTF0 — Port F bit 0 |
| 핀 42 | PTF1 — Port F bit 1 |
| 핀 43 | PTF2 — Port F bit 2 |
| 핀 44 | PTF3 — Port F bit 3 |
| 핀 45 | PTF4 — Port F bit 4 |
| 핀 46 | PTF5 — Port F bit 5 |
| 핀 47 | PTF6 — Port F bit 6 |
| 핀 48 | PTF7 — Port F bit 7 |
| 핀 49 | PTG0 — Port G bit 0 |
| 핀 50 | PTG1 — Port G bit 1 |
| 핀 51 | PTG2 — Port G bit 2 |
| 핀 52 | PTG3 — Port G bit 3 |
| 핀 53 | PTG4 — Port G bit 4 |
| 핀 54 | PTG5 — Port G bit 5 |
| 핀 55 | PTG6 — Port G bit 6 |
| 핀 56 | PTG7 — Port G bit 7 |
| 핀 57 | VDD — Supply voltage |
| 핀 58 | VDDA — Analog supply voltage |
| 핀 59 | VSSA — Analog ground |
| 핀 60 | VSS — Digital ground |
| 핀 61 | IRQ — External interrupt request |
| 핀 62 | RESET — Reset input (active low) |
| 핀 63 | BGND — Background debug mode |
| 핀 64 | OSC1 — Crystal oscillator input |
일반적인 애플리케이션
MC908GZ48CFUE 적합 용도: 6 애플리케이션s: Automotive Body Control Module, HVAC Actuator Controller, Industrial Sensor Interface Board, Appliance Control Panel, Instrument Cluster Sub-Module, Simple Motor Control (Brushed DC / Stepper).
Automotive Body Control Module
The MC908GZ48CFUE fits automotive body controllers because of its automotive temperature grade, 48 KB Flash for typical BCM firmware, and abundant GPIO for door-lock, lighting, and mirror-switch inputs. Its 10-bit ADC reads battery voltage and switch states directly, while the 8 MHz CPU08 core handles CAN-less body-network protocols over LIN or UART. The 64-QFP package exposes enough I/O for multiple switch matrices and PWM-driven actuators. Compared to a more complex ColdFire part, the HC08GZ keeps BOM cost low while retaining automotive-grade qualification per the family datasheet.
추천
HVAC Actuator Controller
The MC908GZ48CFUE suits HVAC damper and blower-motor actuators thanks to its integrated 10-bit ADC for temperature-sensor reads and multiple timer modules for PWM-driven motor control. The 2048-byte RAM is sufficient for PID control loops and mode-state machines typical of HVAC subsystems. Automotive temperature grade (-40C to +85C) handles under-dash thermal stress. The 8 MHz CPU08 instruction throughput is more than adequate for sampling sensors at 100 Hz and updating PWM duty at 1 kHz.
추천
Industrial Sensor Interface Board
The MC908GZ48CFUE is a strong fit for industrial sensor hubs that aggregate analog inputs from 4-20 mA loops, thermistors, or bridge sensors. Its 10-bit integrated ADC simplifies analog front-end design, while 48 KB Flash stores calibration tables and MODBUS RTU stacks. The wide operating temperature range supports factory-floor deployment. Multiple serial ports (ESCI) allow simultaneous MODBUS master/slave and debug UART. The 64-QFP footprint eases hand-rework for low-volume industrial SKUs.
추천
Appliance Control Panel
The MC908GZ48CFUE powers washing-machine, dishwasher, and oven control panels that need abundant GPIO for key-scan matrices, seven-segment or LCD displays, and relay drivers. Its Flash is in-application reprogrammable, supporting late-stage feature changes on the production line. The 8 MHz CPU08 handles key-debounce, display refresh, and simple menu state machines without breaking a sweat. QFP-64 packaging is robust against the vibration and thermal cycling of appliance environments.
추천
Instrument Cluster Sub-Module
The MC908GZ48CFUE can act as a sub-MCU inside instrument clusters, handling telltale indicators, gauge PWM drive, and odometer storage while a primary MCU runs the display. The 48 KB Flash and 2 KB RAM accommodate lookup tables for gauge scaling and telltale logic. The 10-bit ADC reads fuel-level and temperature sensors directly. Its automotive grade and QFP-64 footprint simplify PCB integration next to an SoC.
추천
Simple Motor Control (Brushed DC / Stepper)
The MC908GZ48CFUE drives small brushed-DC or unipolar stepper motors in automotive and industrial subsystems using its on-chip timer PWM channels and 10-bit ADC for current or position feedback. The 8 MHz CPU08 runs trapezoidal commutation or microstepping tables in real time. Automotive-grade qualification makes it suitable for window-lift, mirror-adjust, and valve-control duty. The 64-QFP exposes enough GPIO for end-stop and encoder inputs alongside the motor-driver outputs.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC908GZ48CFUE — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC908GZ60CFAE | MC908GR48ACFUE | MC908GR60ACFUE | MC68908GZ16CFJE |
|---|---|---|---|---|---|
| Package | 64-QFP (14x14 mm) | 64-QFP - same | 64-QFP - same | 64-QFP - same | 64-LQFP/J - same footprint family |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | M68HC08 CPU08, 8-bit | M68HC08 CPU08, 8-bit | M68HC08 CPU08, 8-bit | M68HC08 CPU08, 8-bit | HC68908 CPU08, 8-bit |
| Flash Size | 48 KB | 60 KB | 48 KB | 60 KB | 16 KB |
| RAM Size | 2048 bytes | 2048 bytes | 1536 bytes | 2048 bytes | 1024 bytes |
| Maximum Clock | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 8 MHz |
| CAN Module | No | No | Yes (MSCAN) | Yes (MSCAN) | No |
| ADC Resolution | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit |
| Automotive Grade | Yes | Yes | Yes | Yes | Yes |
주요 차별점
- Optimal balance of Flash size and cost in HC08GZ family (vs MC908GZ60CFAE)
- Lower cost vs CAN-equipped sibling (vs MC908GR48ACFUE)
- Larger Flash than low-end HC08GZ variant (vs MC68908GZ16CFJE)
설계 노트
Estimated: at 5 V VDD and 8 MHz active, the MC908GZ48CFUE typically draws 15-25 mA active and 5-10 uA in stop mode per family datasheet. Provide a 100 nF ceramic decoupling cap on each VDD/VSS pin pair, plus a 4.7-10 uF bulk cap on the main 5 V rail. Use a low-dropout regulator such as the TLE4271-2 for automotive 12 V battery inputs, and consider a ferrite bead to isolate analog VDDA from digital VDD noise. Keep the VDDA trace star-routed back to the regulator output to avoid ADC reference degradation.
The 64-QFP (14x14 mm, 0.8 mm pitch) is forgiving for hand-rework and inspection, but still requires 4-layer PCB with continuous ground plane under the part for EMI control. Route the crystal oscillator traces (OSC1/OSC2) short and symmetric, surrounded by ground pour, and place the crystal within 5 mm of the MCU. Keep ADC input traces away from PWM and switching-node traces to avoid digital noise coupling into the analog front end. Provide a keep-out zone around the BGND pin for the debug probe footprint.
Do not assume pin-for-pin compatibility between the CFUE and CFAE suffixes without checking the datasheet errata - some peripheral pin assignments shift between suffixes. Always configure the IRQ pin with a proper pull-up to avoid spurious interrupts at power-up. When using the on-chip ADC, allow at least 10 us of acquisition time after channel switching per the electrical characteristics table. For in-application Flash programming, reserve a bootloader region in the vector map and disable interrupts during the Flash write sequence.
규정 준수 정보
RoHS and REACH compliance per NXP product page. Automotive grade per HC08GZ family datasheet. Halogen-free status not explicitly stated in verified data.