MC9S08PA8VTG - 8-Bit 20MHz MCU, 8KB Flash | NXP
N.º da peça: MC9S08PA8VTG ✗ Fim de vidaMC9S08PA8VTG Visão geral
An 8-bit microcontroller is a microprocessor optimized for embedded control tasks. The S08 architecture combines a central processing unit, nonvolatile program memory, volatile data memory, timers, serial interfaces, and analog peripherals in one integrated circuit. Within the semiconductor hierarchy, this device belongs to the microcontroller family and operates as the central controller for a dedicated appliance, instrument, or control system.
The MC9S08PA8VTG provides 8 KB of Flash, organized as 8K x 8, for firmware storage and 512 bytes of RAM for working data. Its 20 MHz operating frequency supports responsive control-loop execution, while a 16-bit timer provides a higher-resolution timing resource than an 8-bit timer. The device also integrates an ADC, analog comparator, EEPROM, and motor-control Flex Timer, reducing the number of external components required in measurement and motor-control systems.
The S08PA family is positioned for compact embedded products that need more capability than a basic 8-bit control device without moving to a higher-cost 16- or 32-bit architecture. Integrated analog conversion and comparison can support sensor conditioning, threshold detection, and closed-loop control. Flash retains programmed firmware without power, while RAM supports stack, variables, and transient state during execution. The NXP manufacturer part page identifies the device as NRND, so engineers should account for product-change notices and planned migration when starting new production designs.
Typical applications include compact automotive controls, industrial sensing modules, motor-control boards, appliance interfaces, and low-cost embedded instruments. The 16-pin TSSOP package can simplify board layouts where space is constrained, although exposed-pad thermal requirements and signal-routing discipline remain design considerations. The industrial temperature-grade marking supports designs intended for controlled industrial environments when the complete operating-temperature limits are confirmed during design verification.
Before committing a layout, check the manufacturer datasheet for the exact pin assignments, power requirements, clocking options, and recommended decoupling network. Preserve the TSSOP land pattern and verify programming, reset, and debug access. Because the device is NRND, compare current lifecycle notices and qualify any replacement before transferring an approved production design.
This product record combines the manufacturer lifecycle information, distributor package and memory details, cross-reference candidates, application guidance, and design considerations needed to evaluate the MC9S08PA8VTG for embedded control platforms.
Alternativas drop-in para MC9S08PA8VTG — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MC9S08PA8VTG (mesmo formato e footprint) — diferindo em Package, Core, Core Architecture, EEPROM, Operating Temperature Range.
MC9S08PA8AMTG
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC9S08PA8AVTG
✅ Drop-InConsulte o preço
Ver ficha técnica →MC9RS08KB8CTG
✅ Drop-InConsulte o preço
Ver ficha técnica →MC9S08PA8VTG Classificações máximas e características elétricas
| Architecture | 8-bit |
| Core | HCS08L / S08 |
| Frequência máxima de clock | 20 MHz |
| Flash Memory | 8 KB (8K x 8) |
| RAM | 512 bytes |
| Timer Resolution | 16-bit |
| ADC | Integrated |
| Analog Comparator | Integrated |
| Motor-Control Timer | Integrated Flex Timer |
| EEPROM | Integrated |
| Contagem de pinos | 16 pins |
| Encapsulamento | 16-TSSOP |
| Terminal Style | Gull-wing |
| Temperature Grade | Industrial |
| Status do ciclo de vida | NRND |
Guia de Configuração de Pinos do MC9S08PA8VTG 16-tssop
Configuração de pinos para MC9S08PA8VTG (pacote 16-tssop). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para MC9S08PA8VTG.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MC9S08PA8VTG é adequado para 6 aplicaçãos: Compact Automotive Control Module, Industrial Sensor Interface, Small Motor Controller, Appliance Control Panel, Low-Cost Embedded Instrument, HVAC and Environmental Control.
Compact Automotive Control Module
The MC9S08PA8VTG fits compact automotive control modules that combine sensing, logic, and basic timing in one controller. Its 20 MHz 8-bit core executes control logic quickly enough for responsive digital decision-making, while 8 KB of Flash stores application firmware and 512 bytes of RAM holds working variables. The integrated ADC, analog comparator, EEPROM, and motor-control Flex Timer can reduce external circuitry around sensors, switches, and actuators. An NRND lifecycle status makes product-change review and supply planning essential, while the 16-pin TSSOP supports compact board construction where gull-wing assembly remains acceptable.
Recomendado
Industrial Sensor Interface
The MC9S08PA8VTG is appropriate for a small industrial sensor interface that must acquire analog information and apply threshold or control logic. Its integrated ADC reduces the need for a separate converter, and the analog comparator can support fast limit detection without continuous CPU intervention. The 20 MHz HCS08L core provides processing headroom, 8 KB of Flash accommodates firmware, and 512 bytes of RAM supports buffered measurements and state variables. Designers should confirm the electrical operating range, pin multiplexing, and acquisition timing in the manufacturer datasheet before selecting input and protection components.
Recomendado
Small Motor Controller
The MC9S08PA8VTG can serve as the controller in a small motor-control design because it integrates a motor-control Flex Timer alongside an ADC and analog comparator. The timer supports periodic control functions, the analog resources can monitor current or position-related signals, and the 20 MHz core can execute the supervisory logic. Its 8 KB Flash provides space for control firmware, while 512 bytes of RAM covers modest working-state requirements. The final design must verify timer-channel allocation, pin multiplexing, drive-stage interface, and thermal conditions using the complete NXP documentation.
Recomendado
Appliance Control Panel
The MC9S08PA8VTG fits appliance control panels that combine button inputs, indicators, sensors, and deterministic timing. Its 8-bit S08 architecture keeps firmware and hardware complexity modest, while the 20 MHz operating rate supports responsive user-interface logic and periodic tasks. Integrated EEPROM can retain configuration or calibration data, and the integrated ADC can read resistive or analog sensors without a separate converter. The 16-pin TSSOP provides a manageable number of connections, but the final pin budget must be checked carefully because alternate peripheral functions can constrain simultaneous sensor, timer, and serial-interface assignments.
Recomendado
Low-Cost Embedded Instrument
The MC9S08PA8VTG is suitable for a dedicated embedded instrument in which a microcontroller performs measurement, control, and user feedback in one package. The integrated ADC and analog comparator support analog measurement tasks, the 16-bit timer provides precise periodic timing, and 8 KB of Flash holds a focused application program. A 512-byte RAM footprint is appropriate for modest buffering and control state rather than large data acquisition workloads. For instruments requiring extensive calibration storage, protocol handling, or complex user interfaces, validate memory requirements early and review the controller's reset, clock, and debug behavior.
Recomendado
HVAC and Environmental Control
The MC9S08PA8VTG can support HVAC or environmental-control subsystems that combine temperature-style analog measurements, output timing, stored configuration, and simple supervisory logic. Its 20 MHz core and integrated ADC enable responsive sampling and control, while the analog comparator can perform threshold decisions and the 16-bit timer supports periodic tasks. Eight kilobytes of Flash is adequate for focused firmware, and 512 bytes of RAM is sufficient for lightweight working state. The 16-pin package helps limit board size, although engineers should confirm pin multiplexing, supply limits, and peripheral availability before finalizing sensor and actuator assignments.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MC9S08PA8VTG — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MC9S08PA8AMTG | MC9S08PA8AVTG | MC9RS08KB8CTG |
|---|---|---|---|---|
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Architecture | 8-bit S08 / HCS08L | 8-bit S08 / HCS08L | 8-bit S08 / HCS08L | 8-bit RS08 |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 8 KB (8K x 8) | 8 KB (8K x 8) | 8 KB (8K x 8) | 8 KB (8K x 8) |
| RAM | 512 bytes | 512 bytes | 512 bytes | 512 bytes |
| Integrated Analog | ADC, analog comparator, and EEPROM | ADC, analog comparator, and EEPROM | ADC, analog comparator, and EEPROM | ADC, analog comparator, and EEPROM |
| Motor-Control Timer | Integrated Flex Timer | Integrated Flex Timer | Integrated Flex Timer | Integrated Flex Timer |
Principais diferenciais
- Directly aligned S08PA replacement candidates (vs MC9S08PA8AMTG)
- Same package and memory class with a related core architecture (vs MC9RS08KB8CTG)
- Integrated analog reduces discrete controller overhead (vs MC9S08PA8AVTG)
Notas de projeto
Confirm the permitted supply range, absolute maximum ratings, and decoupling requirements in the manufacturer datasheet before selecting capacitors or regulators. Place the required input capacitors close to the supply and ground pins, keep the return path short, and verify startup behavior with the intended clock and reset configuration. This is especially important because the NRND status makes late changes to power-tree or procurement planning costly.
Assign the 16 TSSOP pins from the manufacturer pin-description table before routing analog, timer, programming, and serial functions. Several peripherals can multiplex onto the same pins, so a spreadsheet check should cover simultaneous use of the ADC, comparator, Flex Timer, communications, reset, and clock signals. Preserve the manufacturer land pattern and add clear assembly and test access to programming and debug contacts.
Route analog inputs away from switching nodes, motor-drive traces, and the clock source. Keep the analog ground return compact and use a single planned connection between analog and digital ground regions unless the datasheet specifies a different topology. When using the ADC or comparator, define acquisition timing in firmware and validate the threshold or conversion sequence with real sensor impedance and operating conditions.
Do not treat package similarity as proof of a drop-in replacement. Compare pin functions, interrupt vectors, timer channels, memory maps, reset behavior, programming algorithms, and electrical limits for every candidate. The MC9RS08KB8CTG uses the related RS08 core family, while MC9S08PA8AMTG and MC9S08PA8AVTG belong to the S08PA family; perform software and hardware regression testing before substitution.
Informações de conformidade
The manufacturer product page identifies the part as NRND and describes automotive and industrial design use, but no explicit environmental or automotive-qualification declaration is stated in the supplied product information.