NXP Semiconductors

MC9S08PA8VTG - 8-Bit 20MHz MCU, 8KB Flash | NXP

MPN: MC9S08PA8VTG ✗ Cuối đời
16-TSSOP Package 20 MHz Speed 8 KB (8K x 8) Memory
MOQ: 1 |

MC9S08PA8VTG Tóm tắt

The NXP Semiconductors MC9S08PA8VTG is an 8-bit S08-family microcontroller with a 20 MHz HCS08L core, 8 KB of Flash memory, 512 bytes of RAM, and a 16-pin TSSOP package. It is designed for cost-sensitive automotive and industrial controls that require embedded flash, integrated analog functions, timers, and a compact surface-mount footprint.

An 8-bit microcontroller is a microprocessor optimized for embedded control tasks. The S08 architecture combines a central processing unit, nonvolatile program memory, volatile data memory, timers, serial interfaces, and analog peripherals in one integrated circuit. Within the semiconductor hierarchy, this device belongs to the microcontroller family and operates as the central controller for a dedicated appliance, instrument, or control system.

The MC9S08PA8VTG provides 8 KB of Flash, organized as 8K x 8, for firmware storage and 512 bytes of RAM for working data. Its 20 MHz operating frequency supports responsive control-loop execution, while a 16-bit timer provides a higher-resolution timing resource than an 8-bit timer. The device also integrates an ADC, analog comparator, EEPROM, and motor-control Flex Timer, reducing the number of external components required in measurement and motor-control systems.

The S08PA family is positioned for compact embedded products that need more capability than a basic 8-bit control device without moving to a higher-cost 16- or 32-bit architecture. Integrated analog conversion and comparison can support sensor conditioning, threshold detection, and closed-loop control. Flash retains programmed firmware without power, while RAM supports stack, variables, and transient state during execution. The NXP manufacturer part page identifies the device as NRND, so engineers should account for product-change notices and planned migration when starting new production designs.

Typical applications include compact automotive controls, industrial sensing modules, motor-control boards, appliance interfaces, and low-cost embedded instruments. The 16-pin TSSOP package can simplify board layouts where space is constrained, although exposed-pad thermal requirements and signal-routing discipline remain design considerations. The industrial temperature-grade marking supports designs intended for controlled industrial environments when the complete operating-temperature limits are confirmed during design verification.

Before committing a layout, check the manufacturer datasheet for the exact pin assignments, power requirements, clocking options, and recommended decoupling network. Preserve the TSSOP land pattern and verify programming, reset, and debug access. Because the device is NRND, compare current lifecycle notices and qualify any replacement before transferring an approved production design.

This product record combines the manufacturer lifecycle information, distributor package and memory details, cross-reference candidates, application guidance, and design considerations needed to evaluate the MC9S08PA8VTG for embedded control platforms.

Bộ thay thế dễ dàng lắp đặt cho MC9S08PA8VTG — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MC9S08PA8VTG (cùng hình factor và footprint) — khác nhau ở Package, Core, Core Architecture, EEPROM, Operating Temperature Range.

NXP Semiconductors
Package: 16-TSSOP (4.40 mm body width)
Core Architecture: RS08 8-bit
Operating Temperature Range: -40 C to +85 C
So sánh với MC9S08PA8VTG →
NXP Semiconductors
Package: 16-TSSOP (0.173", 4.40 mm width)
Core: RS08 (subset of HC08 with BGND)
Operating Temperature Range: -40C to +85C
So sánh với MC9S08PA8VTG →
NXP Semiconductors
Package: 20-pin TSSOP
Core Architecture: HCS08L (S08 family)
So sánh với MC9S08PA8VTG →
NXP Semiconductors
EEPROM: Yes (integrated)
So sánh với MC9S08PA8VTG →
NXP Semiconductors
Package: TSSOP-16
Core: S08 (HCS08L)
Core Architecture: 8-bit
So sánh với MC9S08PA8VTG →
NXP Semiconductors
Package: 20-TSSOP, 4.40 mm width
Operating Temperature Range: -40°C to 105°C
So sánh với MC9S08PA8VTG →

MC9S08PA8AMTG

✅ Drop-In
📦 16-TSSOP
Flash memory differs by 0% at 8 KB and the identified operating-frequency difference is 0% at 20 MHz; temperature-grade ordering must be checked.

📋 Tham chiếu thay thế (không có trong danh mục)

MC9S08PA8AVTG

✅ Drop-In
NXP Semiconductors
📦 16-TSSOP
S08 (HCS08L) 8-bit CISC · 8-bit · 20 MHz · 8 KB (8K x 8) · Yes (integrated) · 5 V

Liên hệ để biết giá

Xem tài liệu →

MC9RS08KB8CTG

✅ Drop-In
NXP Semiconductors
📦 16-TSSOP
RS08 (subset of HC08 with BGND) · 8 bit · 8 KB (8K x 8) Flash · 20 MHz · 2.7 V to 5.5 V · -40C to +85C · 16-TSSOP (0.173", 4.40 mm width) · Surface Mount

Liên hệ để biết giá

Xem tài liệu →

MC9S08PA8VTG Tỷ lệ tối đa & tính chất điện

Architecture 8-bit
Core HCS08L / S08
Tần số xung maksimum 20 MHz
Flash Memory 8 KB (8K x 8)
RAM 512 bytes
Timer Resolution 16-bit
ADC Integrated
Analog Comparator Integrated
Motor-Control Timer Integrated Flex Timer
EEPROM Integrated
Số chân 16 pins
Hộp 16-TSSOP
Terminal Style Gull-wing
Temperature Grade Industrial
Trạng thái vòng đời NRND

Hướng dẫn cấu hình chân MC9S08PA8VTG 16-tssop

Cấu hình chân cho MC9S08PA8VTG (16-tssop gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 16-tssop cho MC9S08PA8VTG

Không có dữ liệu chân cụ thể sẵn có cho MC9S08PA8VTG.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MC9S08PA8VTG phù hợp cho 6 Áp dụngs: Compact Automotive Control Module, Industrial Sensor Interface, Small Motor Controller, Appliance Control Panel, Low-Cost Embedded Instrument, HVAC and Environmental Control.

🚗

Compact Automotive Control Module

The MC9S08PA8VTG fits compact automotive control modules that combine sensing, logic, and basic timing in one controller. Its 20 MHz 8-bit core executes control logic quickly enough for responsive digital decision-making, while 8 KB of Flash stores application firmware and 512 bytes of RAM holds working variables. The integrated ADC, analog comparator, EEPROM, and motor-control Flex Timer can reduce external circuitry around sensors, switches, and actuators. An NRND lifecycle status makes product-change review and supply planning essential, while the 16-pin TSSOP supports compact board construction where gull-wing assembly remains acceptable.

🏭

Industrial Sensor Interface

The MC9S08PA8VTG is appropriate for a small industrial sensor interface that must acquire analog information and apply threshold or control logic. Its integrated ADC reduces the need for a separate converter, and the analog comparator can support fast limit detection without continuous CPU intervention. The 20 MHz HCS08L core provides processing headroom, 8 KB of Flash accommodates firmware, and 512 bytes of RAM supports buffered measurements and state variables. Designers should confirm the electrical operating range, pin multiplexing, and acquisition timing in the manufacturer datasheet before selecting input and protection components.

🔧

Small Motor Controller

The MC9S08PA8VTG can serve as the controller in a small motor-control design because it integrates a motor-control Flex Timer alongside an ADC and analog comparator. The timer supports periodic control functions, the analog resources can monitor current or position-related signals, and the 20 MHz core can execute the supervisory logic. Its 8 KB Flash provides space for control firmware, while 512 bytes of RAM covers modest working-state requirements. The final design must verify timer-channel allocation, pin multiplexing, drive-stage interface, and thermal conditions using the complete NXP documentation.

📱

Appliance Control Panel

The MC9S08PA8VTG fits appliance control panels that combine button inputs, indicators, sensors, and deterministic timing. Its 8-bit S08 architecture keeps firmware and hardware complexity modest, while the 20 MHz operating rate supports responsive user-interface logic and periodic tasks. Integrated EEPROM can retain configuration or calibration data, and the integrated ADC can read resistive or analog sensors without a separate converter. The 16-pin TSSOP provides a manageable number of connections, but the final pin budget must be checked carefully because alternate peripheral functions can constrain simultaneous sensor, timer, and serial-interface assignments.

🖥️

Low-Cost Embedded Instrument

The MC9S08PA8VTG is suitable for a dedicated embedded instrument in which a microcontroller performs measurement, control, and user feedback in one package. The integrated ADC and analog comparator support analog measurement tasks, the 16-bit timer provides precise periodic timing, and 8 KB of Flash holds a focused application program. A 512-byte RAM footprint is appropriate for modest buffering and control state rather than large data acquisition workloads. For instruments requiring extensive calibration storage, protocol handling, or complex user interfaces, validate memory requirements early and review the controller's reset, clock, and debug behavior.

🧩

HVAC and Environmental Control

The MC9S08PA8VTG can support HVAC or environmental-control subsystems that combine temperature-style analog measurements, output timing, stored configuration, and simple supervisory logic. Its 20 MHz core and integrated ADC enable responsive sampling and control, while the analog comparator can perform threshold decisions and the 16-bit timer supports periodic tasks. Eight kilobytes of Flash is adequate for focused firmware, and 512 bytes of RAM is sufficient for lightweight working state. The 16-pin package helps limit board size, although engineers should confirm pin multiplexing, supply limits, and peripheral availability before finalizing sensor and actuator assignments.

Tóm tắt các sản phẩm được đề xuất

MC9S08PA8AMTG Closely related automotive-temperature-grade ordering option Được sử dụng trong: Compact Automotive Control Module, Industrial Sensor Interface, Small Motor Controller, Low-Cost Embedded Instrument, HVAC and Environmental Control MC9S08PA8AVTG NXP Semiconductors Được sử dụng trong: Compact Automotive Control Module, Small Motor Controller, Appliance Control Panel, Low-Cost Embedded Instrument MC9RS08KB8CTG NXP Semiconductors Được sử dụng trong: Industrial Sensor Interface, Appliance Control Panel, HVAC and Environmental Control
What is the MC9S08PA8VTG?
The MC9S08PA8VTG is an NXP Semiconductors 8-bit S08-family microcontroller operating at up to 20 MHz. According to the manufacturer product page, it includes 8 KB of Flash memory, 512 bytes of RAM, a 16-bit timer, and integrated analog functions in a 16-pin TSSOP package. It is intended primarily for automotive and industrial embedded-control designs.
What are the key specifications of MC9S08PA8VTG?
The MC9S08PA8VTG combines an 8-bit HCS08L architecture, a 20 MHz maximum operating frequency, 8 KB of Flash, 512 bytes of RAM, and a 16-bit timer. The NXP product information also identifies an integrated ADC, analog comparator, EEPROM, and motor-control Flex Timer, all housed in a 16-pin TSSOP package.
Is MC9S08PA8VTG active or NRND?
The MC9S08PA8VTG is listed as NRND by NXP Semiconductors. According to the manufacturer product page, NRND means the part is not recommended for new designs. Existing programs may still require supply continuity, so production planning should include review of current product-change notices and a qualified migration path.
Where can I download the MC9S08PA8VTG datasheet?
The MC9S08PA8VTG datasheet and product documents are available through the official NXP part page at https://www.nxp.com/part/MC9S08PA8VTG. The manufacturer datasheet is the controlling document for pin assignments, electrical limits, memory behavior, clocking, timing, and recommended application circuits.
Where can I find the MC9S08PA8VTG pinout?
Use the pin-description table and package drawing in the NXP MC9S08PA8VTG manufacturer datasheet to identify every pin and its multiplexed function. The device is identified as a 16-pin TSSOP, but the complete pin names and alternate functions are not listed on the product page. Confirm the assigned package drawing before laying out a replacement board.
What can replace the MC9S08PA8VTG?
MC9S08PA8AMTG, MC9S08PA8AVTG, and MC9RS08KB8CTG are the closest published cross-reference candidates for the MC9S08PA8VTG. Their shared 8-bit architecture, 20 MHz class, 8 KB Flash class, and 16-TSSOP format support replacement evaluation. Verify pin functions, memory map, peripherals, timing, and software compatibility before substitution.
Is MC9S08PA8VTG the same as MC9RS08KB8CTG?
MC9S08PA8VTG and MC9RS08KB8CTG are closely related 8-bit controllers with 20 MHz operation, 8 KB Flash, and a 16-TSSOP package according to their published comparison. The core family differs between S08/HCS08L and RS08, so physical package similarity does not guarantee software, peripheral, or interrupt compatibility.
MC9S08PA8VTG vs MC9S08PA8AMTG - which is better?
MC9S08PA8VTG is the better choice when industrial temperature grading is required, while MC9S08PA8AMTG should be evaluated when the target product needs the alternative temperature-grade option. Their core frequency and Flash-memory class are closely aligned, but final selection depends on the complete ordering information and the manufacturer datasheet for each suffix.
When should I choose MC9S08PA8VTG over MC9RS08KB8CTG?
Choose MC9S08PA8VTG when an existing design is built around the S08 or HCS08L programming model, software startup sequence, and peripheral organization. MC9RS08KB8CTG may be attractive when its RS08 resources and toolchain support align better with a new design. A board-level drop-in decision still requires a complete pin-function comparison.
Is MC9S08PA8VTG suitable for automotive and industrial controls?
The MC9S08PA8VTG is suitable for automotive and industrial control concepts requiring an 8-bit controller, 8 KB Flash, 512 bytes of RAM, and integrated analog functions. The device is marked for industrial temperature use and its family includes EEPROM, ADC, comparator, and motor-control timers. Confirm electrical limits and qualification requirements for the finished application.
Does MC9S08PA8VTG have ADC and motor-control peripherals?
Yes. The S08PA family integrates an ADC, an analog comparator, and a motor-control Flex Timer, and the MC9S08PA8VTG also includes EEPROM. These resources support sensor measurement, threshold decisions, periodic control, and motor-related functions while preserving the low-complexity architecture of an 8-bit MCU.
Where can I buy MC9S08PA8VTG online?
Use the Request a Quote form on this page to request MC9S08PA8VTG availability, current lead time, and an order quotation. Because the manufacturer lists the part as NRND, buyers should request the latest availability and lifecycle information and should specify the required package, quantity, and date code in the quotation request.
What is the price of MC9S08PA8VTG?
Current MC9S08PA8VTG pricing depends on quantity, condition, date code, and lifecycle status. Use the Request a Quote form on this page for the applicable quotation. Because the manufacturer lists the device as NRND, a written quotation should also confirm supply continuity, lot traceability, and whether any quantity allocations apply.
What is the lead time for MC9S08PA8VTG?
Request the current MC9S08PA8VTG lead time through the Request a Quote form on this page. The NXP product page identifies the component as NRND, so lead-time and availability should be confirmed at quotation rather than assumed from general microcontroller supply. Include production volume and required delivery date in the request.
Is MC9S08PA8VTG in stock?
MC9S08PA8VTG stock should be confirmed through the Request a Quote form on this page. The component is NRND, so inventory and production plans can change as NXP manages remaining supply. Specify the required quantity and target date when requesting availability to obtain a usable delivery commitment.
What are the main design limitations of the MC9S08PA8VTG?
The main limitations are its 8-bit architecture, 8 KB Flash capacity, 512 bytes of RAM, and NRND lifecycle status. These constraints suit compact embedded control tasks but may be inadequate for large codebases, data-heavy applications, or new long-life production programs. The NXP product-change notices should be reviewed before design release.

Dữ liệu tham khảo kỹ thuật cho MC9S08PA8VTG — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose MC9S08PA8VTG for an existing S08-based industrial or automotive control platform that requires a 20 MHz 8-bit core, 8 KB Flash, 512 bytes of RAM, and a 16-pin TSSOP footprint. Select MC9S08PA8AMTG when its temperature-grade ordering matches the product more closely, and evaluate MC9S08PA8AVTG as another closely related S08PA configuration. Consider MC9RS08KB8CTG when its RS08 toolchain and peripheral resources align with a new design, but do not approve it as a board-level substitute without checking pin functions and software behavior. Because MC9S08PA8VTG is NRND, favor it primarily for continuity in qualified designs; new long-life programs should evaluate lifecycle notices and a fully qualified migration plan before layout release.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MC9S08PA8AMTG MC9S08PA8AVTG MC9RS08KB8CTG
Package 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Architecture 8-bit S08 / HCS08L 8-bit S08 / HCS08L 8-bit S08 / HCS08L 8-bit RS08
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz 20 MHz
Flash Memory 8 KB (8K x 8) 8 KB (8K x 8) 8 KB (8K x 8) 8 KB (8K x 8)
RAM 512 bytes 512 bytes 512 bytes 512 bytes
Integrated Analog ADC, analog comparator, and EEPROM ADC, analog comparator, and EEPROM ADC, analog comparator, and EEPROM ADC, analog comparator, and EEPROM
Motor-Control Timer Integrated Flex Timer Integrated Flex Timer Integrated Flex Timer Integrated Flex Timer

Bảo phân biệt quan trọng

  • Directly aligned S08PA replacement candidates (vsMC9S08PA8AMTG)
  • Same package and memory class with a related core architecture (vsMC9RS08KB8CTG)
  • Integrated analog reduces discrete controller overhead (vsMC9S08PA8AVTG)

Ghi chú thiết kế

Confirm the permitted supply range, absolute maximum ratings, and decoupling requirements in the manufacturer datasheet before selecting capacitors or regulators. Place the required input capacitors close to the supply and ground pins, keep the return path short, and verify startup behavior with the intended clock and reset configuration. This is especially important because the NRND status makes late changes to power-tree or procurement planning costly.

Assign the 16 TSSOP pins from the manufacturer pin-description table before routing analog, timer, programming, and serial functions. Several peripherals can multiplex onto the same pins, so a spreadsheet check should cover simultaneous use of the ADC, comparator, Flex Timer, communications, reset, and clock signals. Preserve the manufacturer land pattern and add clear assembly and test access to programming and debug contacts.

Route analog inputs away from switching nodes, motor-drive traces, and the clock source. Keep the analog ground return compact and use a single planned connection between analog and digital ground regions unless the datasheet specifies a different topology. When using the ADC or comparator, define acquisition timing in firmware and validate the threshold or conversion sequence with real sensor impedance and operating conditions.

Do not treat package similarity as proof of a drop-in replacement. Compare pin functions, interrupt vectors, timer channels, memory maps, reset behavior, programming algorithms, and electrical limits for every candidate. The MC9RS08KB8CTG uses the related RS08 core family, while MC9S08PA8AMTG and MC9S08PA8AVTG belong to the S08PA family; perform software and hardware regression testing before substitution.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer product page identifies the part as NRND and describes automotive and industrial design use, but no explicit environmental or automotive-qualification declaration is stated in the supplied product information.

Dữ liệu được xác minh vào: 2026-11-10 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

MC9S08PA8VTG datasheet MC9S08PA8VTG specifications MC9S08PA8VTG pinout MC9S08PA8VTG datasheet pdf MC9S08PA8VTG equivalent MC9S08PA8VTG replacement MC9S08PA8VTG cross reference MC9S08PA8VTG vs MC9RS08KB8CTG MC9S08PA8VTG 16-TSSOP footprint MC9S08PA8VTG 20MHz microcontroller NXP MC9S08PA8VTG MC9S08PA8VTG price MC9S08PA8VTG stock MC9S08PA8VTG automotive control MC9S08PA8VTG industrial sensor

Các bộ phận và thuật ngữ liên quan

NXP Semiconductors MC9S08PA8VTG MC9S08PA8AMTG MC9S08PA8AVTG MC9RS08KB8CTG S08 microcontroller HCS08L core RS08 core 8-bit microcontroller embedded microcontroller Flash memory RAM ADC analog comparator EEPROM Flex Timer 16-bit timer 16-TSSOP TSSOP package family surface-mount package automotive control industrial control sensor interface motor control NRND lifecycle status
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ