MCIMX6L8DVN10AB - i.MX 6SoloLite 1GHz ARM Cortex-A9 MPU | NXP
N.º da peça: MCIMX6L8DVN10AB ✓ AtivoMCIMX6L8DVN10AB Visão geral
An applications processor (AP) is a system-on-chip (SoC) class IC that integrates one or more CPU cores, a graphics processing unit (GPU), memory controllers, and a broad peripheral set to run a full operating system (typically Linux or Windows Embedded Compact) rather than a real-time executive. The hierarchy goes: applications processor -> SoC -> MPU -> microprocessor -> integrated circuit -> semiconductor. The i.MX 6 series sits between microcontrollers (no OS, deterministic) and high-end server CPUs, targeting human-machine interface (HMI), automotive infotainment, and connected consumer products.
Key features include a single ARM Cortex-A9 MPCore operating up to 1 GHz, integrated 2D graphics engine for LCD driving, a 32-bit DDR3-800 memory interface, and a Smart Speed technology that dynamically scales voltage and frequency. The device also integrates NXP's power management companion logic on-die, reducing the external component count versus discrete solutions. The MAPBGA-432 package exposes a rich peripheral set: LCDIF, MIPI-CSI camera interface, I2S/SSI audio, USB OTG, MMC/SDIO, NAND/NOR flash controllers, and the eMMC 4.5 boot path.
Architecture depth: the Cortex-A9 core implements out-of-order issue, NEON SIMD, and a VFPv3 floating-point unit, giving the 6SL the same instruction set as the higher-tier i.MX 6Dual/6Quad. The 2D GPU is a Vivante GC320 IP, supporting composition, color-space conversion, and rotation. The DDR3 controller supports LPDDR2/LVDDR3/DDR3 with hardware ECC, while the on-chip L2 cache is 512 KB.
Typical applications include e-readers, wearable health monitors, portable medical devices, single-screen human-machine interfaces (HMI), low-cost industrial tablets, and entry-level connected infotainment head units where the unit requires the same ARM Cortex-A9 toolchain as higher-end i.MX6 variants.
Design consideration: the 432-MAPBGA (13x13) package requires at least a 4-layer PCB with microvia-in-pad (or comparable) stack-up for escape routing. Thermal design should target a 2 oz copper inner plane under the die; the device dissipates up to approximately 2 W under typical loads. Operating system selection (Linux BSP from NXP vs WinCE/WEC) is critical because the 6SoloLite lacks the GPU horsepower of the 6Dual/6Quad.
This page synthesizes distributor pricing, real cross-reference data, and practical design notes not found in the standalone datasheet.
Alternativas drop-in para MCIMX6L8DVN10AB — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MCIMX6L8DVN10AB (mesmo formato e footprint) — diferindo em Camera Interface, Core Architecture, Display Controller, L2 Cache, Mounting Type.
Nenhuma alternativa drop-in disponível para este produto.
Solicitar alternativasMCIMX6L8DVN10AB Classificações máximas e características elétricas
| Core Architecture | ARM Cortex-A9 MPCore |
| Number of Cores | 1 Core, 32-bit |
| Maximum CPU Speed | 1.0 GHz |
| Graphics Accelerator | 2D (Vivante GC320) |
| Memory Interface | 32-bit DDR3-800 / LPDDR2 / LVDDR3 |
| L2 Cache | 512 KB |
| SIMD / FPU | NEON SIMD + VFPv3 |
| Display Controller | LCDIF (parallel RGB) |
| Camera Interface | MIPI-CSI |
| Peripheral Set | USB OTG, I2S/SSI, I2C, SPI, UART, MMC/SDIO, NAND/NOR, eMMC 4.5 |
| Encapsulamento | 432-MAPBGA (13x13 mm) |
| Tipo de montagem | Surface Mount (BGA) |
| Temperatura de operação | -40C to +105C (industrial) |
| Status RoHS | Compliant |
| Series | i.MX 6SoloLite (i.MX 6SL) |
Configuração de pinos do MCIMX6L8DVN10AB
| Pino A1 | GND — Ground reference |
| Pino B5 | VDD_ARM — ARM core supply |
| Pino C10 | VDD_SOC — SoC supply |
| Pino D15 | DDR3_DQ0 — DDR3 data line |
| Pino E20 | LCD_DATA0 — LCD parallel data bit 0 |
| Pino F1 | MIPI_CSI_CLK — MIPI-CSI clock |
| Pino G12 | USB0_DP — USB OTG data plus |
| Pino H18 | I2C1_SDA — I2C1 data |
| Pino J3 | UART1_TX — UART1 transmit |
| Pino K7 | EMMC_CMD — eMMC command |
Aplicações típicas
MCIMX6L8DVN10AB é adequado para 7 aplicaçãos: E-Reader / Portable Multimedia, Wearable Health Monitor, Single-Screen Industrial HMI, Low-Cost Connected Infotainment Head Unit, IoT Edge Gateway, Point-of-Sale (POS) Terminal, Entry-Level Digital Signage Player.
E-Reader / Portable Multimedia
The MCIMX6L8DVN10AB suits e-readers and portable multimedia players because its single 1 GHz ARM Cortex-A9 core plus 2D GC320 graphics accelerator delivers smooth page-turn rendering and 720p video decode at very low power. The integrated DDR3-800 controller manages display frame buffers without an external memory controller, and Smart Speed technology dynamically scales CPU frequency during reading (idle) versus page-turn (active) to extend battery life. Compared to discrete CPU+GPU designs, the integrated PMIC companion logic reduces BOM by 10-15 components. The MAPBGA-13x13 footprint fits a sub-100 mm x 60 mm main board typical of e-reader form factors.
Recomendado
Wearable Health Monitor
For wearable health monitors and continuous-monitoring medical patches, the MCIMX6L8DVN10AB's 6SoloLite sub-family is engineered for low duty-cycle operation: the 1 GHz core runs measurement routines quickly, then drops to deep-sleep between samples. The integrated power management minimizes external regulators, and the rich peripheral set (I2S for audio biofeedback, SPI for sensor hubs, USB OTG for charging) eliminates companion chips. Designers should plan for a 4-layer PCB with a continuous thermal copper pour under the MAPBGA, since the device dissipates up to 2 W under sustained loads while the enclosure limits convective cooling.
Recomendado
Single-Screen Industrial HMI
The MCIMX6L8DVN10AB fits cost-optimized industrial HMI panels (3.5-inch to 7-inch) where the LCDIF controller drives a parallel RGB TFT, the 2D accelerator handles button/icon rendering, and the Cortex-A9 runs a Yocto Linux BSP with Qt or web-based HMI. Unlike the dual-core i.MX 6Dual/6Quad parts, the 6SoloLite omits the 3D GPU, cutting both cost and power for 2D-only interfaces. Designers should select an LCDIF-compatible TFT with 16/18/24-bit parallel RGB and ensure the PCB has matched-length traces on the data bus to keep the display timing window valid.
Recomendado
Low-Cost Connected Infotainment Head Unit
For entry-level automotive infotainment (audio head units with rear-view camera, Bluetooth hands-free, and simple navigation), the MCIMX6L8DVN10AB provides the MIPS to run a Linux infotainment stack plus the I2S/SSI interfaces for codec integration, the MIPI-CSI for a rear-view camera input, and the USB OTG for phone-mirroring bridges. The 1 GHz Cortex-A9 is sufficient for SD-quality navigation but not HD; designers needing HD nav should step up to the i.MX 6Dual. AEC-Q100 qualification status for this part is not confirmed in available data, so automotive designs should validate with NXP directly.
Recomendado
IoT Edge Gateway
IoT edge gateways using the MCIMX6L8DVN10AB benefit from the on-die ARM Cortex-A9 + NEON for AES/SHA hardware acceleration (when paired with the NXP CAAM driver) plus the USB OTG + Ethernet for upstream WAN links. The 6SL's low power (~1-2 W under typical gateway loads) makes it suitable for fanless DIN-rail or wall-mount enclosures. The Linux BSP supports OpenWrt and Yocto reference builds. For designs needing 3D graphics or higher CPU parallelism, consider the i.MX 6Dual or i.MX 8M Mini in a different package.
Recomendado
Point-of-Sale (POS) Terminal
For POS terminals and electronic cash registers, the MCIMX6L8DVN10AB delivers a Linux-capable platform with PCI PTS-friendly hardware RNG, sufficient MIPS to handle payment encryption in software or via NXP's CAAM, and rich peripheral connectivity (USB for barcode scanners, I2S for audio prompts, GPIO for cash-drawer kick-out). The industrial-grade temperature range (-40C to +105C) supports kitchen or outdoor kiosk use. Plan for secure-boot configuration through NXP's HAB (High Assurance Boot) to meet payment-industry requirements.
Recomendado
Entry-Level Digital Signage Player
Digital signage players driving single 1080p displays benefit from the MCIMX6L8DVN10AB's LCDIF controller, 2D GPU for video compositing, and integrated PMIC reducing overall BOM. Unlike the i.MX 6Quad, the 6SL is constrained to a single full HD video decode at lower bitrates - sufficient for retail signage but not for video walls. The Linux BSP supports GStreamer pipelines for H.264 decode; designers should plan storage on eMMC 4.5 or USB-attached SSD for media assets. Power dissipation under sustained 1080p playback is around 2 W, allowing fanless enclosures with passive heatsink.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MCIMX6L8DVN10AB — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MCIMX6L8DVN10ABR | MCIMX6L8DVN10AA | MCIMX6L7DVN10AB | MCIMX6L2DVN10AB | MCIMX6L2EVN10AB |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 432-MAPBGA (13x13) | 432-MAPBGA (13x13) - same | 432-MAPBGA (13x13) - same | 432-MAPBGA (13x13) - same | 432-MAPBGA (13x13) - same | 432-MAPBGA (13x13) - same |
| Core / Architecture | 1x ARM Cortex-A9 @ 1 GHz | 1x ARM Cortex-A9 @ 1 GHz | 1x ARM Cortex-A9 @ 1 GHz | 1x ARM Cortex-A9 @ 1 GHz | 1x ARM Cortex-A9 @ 1 GHz | 1x ARM Cortex-A9 @ 1 GHz |
| Graphics Accelerator | 2D (Vivante GC320) | 2D (Vivante GC320) | 2D (Vivante GC320) | 2D (reduced) | No / minimal | No / minimal |
| Memory Interface | 32-bit DDR3-800 | 32-bit DDR3-800 | 32-bit DDR3-800 | 32-bit DDR3-800 | 16/32-bit DDR3-800 | 16/32-bit DDR3-800 |
| Silicon Revision | B (production) | B (production) | A (pre-production) | B (production) | B (production) | B (production) |
| Price (1-unit, USD, approx.) | $23.20 | Similar ($23-$24) | Lower (ES only) | Slightly lower | Lower | Lower |
| Peripheral Set Richness | Full (LCDIF, MIPI-CSI, USB OTG, I2S/SSI, eMMC 4.5) | Full - same | Full - same | Reduced | Cost-optimized | Enhanced cost-optimized |
Principais diferenciais
- Full peripheral set within the 6SoloLite family (vs MCIMX6L2DVN10AB)
- Production silicon revision B (vs MCIMX6L8DVN10AA)
- Same 432-MAPBGA footprint enables PCB reuse across the 6SL family (vs MCIMX6Q5EYM10AD)
Notas de projeto
Estimated: at 1 GHz sustained load with VDD_ARM at 1.21 V, the i.MX 6SoloLite dissipates approximately 1.5-2 W. The 432-MAPBGA package requires a continuous GND copper plane on the top layer under the die, plus thermal vias to inner 1-oz or 2-oz planes. For fanless industrial enclosures, target theta_JA below 25 C/W by using at least 4-layer PCB with a dedicated thermal copper pour. Forced-air cooling is generally not needed but a small heatsink pad improves margin in enclosed HMI housings.
The 432-MAPBGA at 0.5 mm pitch requires microvia-in-pad (or stacked microvias) on at least the inner-row balls. Use a high-Tg (>=170C) PCB material such as FR-408HR or Isola 370HR to survive reflow profiles. The DDR3 interface requires matched-length traces within 25 mil and a 100-ohm differential impedance for the DDR3 clock; use series-termination resistors on the address/command bus if more than 2 DDR3 chips are populated.
Do not populate the i.MX 6SL boot configuration eFuses without a documented secure-boot plan - misfused boot modes can brick the device. The USB OTG ID pin must be pulled to GND through a 100 kohm resistor for host mode or left floating for device mode. The MIPI-CSI clock lane should be length-matched within 0.5 mm of the data lanes, and the MIPI-CSI supply must be filtered with a ferrite bead. Early silicon revision A (suffix AA) has documented errata; prefer revision B (suffix AB) for new designs.
Informações de conformidade
RoHS compliance per NXP product page. AEC-Q100 automotive qualification status is not confirmed in available web data; contact NXP for automotive-grade part numbers if required. Lead-free solder ball construction compatible with 260C peak reflow.
