Microchip Technology

MCP3001T-I/ST - 10-Bit 200ksps SPI ADC | Microchip Technology

N.º da peça: MCP3001T-I/ST ✓ Ativo
2.7 V Vdss 8-pin TSSOP Package
MOQ: 1 |

MCP3001T-I/ST Visão geral

The Microchip Technology MCP3001T-I/ST is a 10-bit, single-channel successive-approximation-register analog-to-digital converter designed for embedded control systems. It operates from a 2.7 V supply, supports sampling rates up to 200 ksps, and uses an SPI-compatible serial interface. The device is offered in an 8-pin TSSOP package and is identified by the automotive-oriented AEC-Q100 designation in the product listing.

An ADC is an interface component that converts a continuous analog voltage into a digital number that a microcontroller, digital signal processor, or other embedded controller can process. The MCP3001 belongs to the SAR ADC family, which compares the input voltage with an internal reference through a sequence of approximation steps. Its 10-bit resolution provides 1,024 selectable codes, while its single analog input channel keeps the device and PCB layout compact for sensors, controls, and instrumentation.

The MCP3001T-I/ST combines low power consumption with a small package and a straightforward serial interface. The manufacturer describes the MCP3001 as suitable for embedded control applications, where the device can digitize a conditioned sensor signal and transfer the result through serial data, clock, and chip-select lines. The SPI interface allows the ADC to share a serialized bus with other peripherals when the system includes appropriate chip-select control.

The 2.7 V minimum operating supply makes the MCP3001 suitable for low-voltage embedded systems, provided the analog input remains within the input range allowed by the selected reference voltage. The ADC uses a reference-voltage arrangement rather than an internally fixed measurement range, allowing the system designer to select the reference according to sensor output and desired full-scale conversion. Proper reference bypassing and analog grounding remain important because reference stability directly affects conversion accuracy.

The MCP3001T-I/ST is commonly used in temperature sensing, potentiometer and position measurement, industrial control, consumer equipment, and low-speed data acquisition. When selecting an external reference, check its accuracy, temperature coefficient, noise, and startup behavior. Place input and reference capacitors close to their associated pins, keep analog and digital return currents separated, and provide a clean supply path to minimize conversion errors.

Designers should use the manufacturer datasheet for the complete pin-description table, recommended application circuit, electrical limits, and timing information. The TSSOP footprint is suitable for compact embedded boards, but thermal performance and soldering process requirements still apply. The device is a single-channel ADC, so applications requiring simultaneous sampling of multiple inputs need multiplexing or a different converter architecture.

Alternativas drop-in para MCP3001T-I/ST — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MCP3001T-I/ST (mesmo formato e footprint) — diferindo em ADC Type.

Microchip Technology
ADC Type: 10-bit SAR analog-to-digital converter

MCP3001-I/ST

✅ Drop-In
Microchip Technology
📦 8-pin TSSOP
10-bit SAR analog-to-digital converter · 10 bit · 1 channel · Successive approximation register (SAR) · SPI-compatible serial interface · 2.7 V

Consulte o preço

Ver ficha técnica →

MCP3001T-I/ST Classificações máximas e características elétricas

ADC Type Successive Approximation Register (SAR)
Resolução 10 bit
Number of Channels 1 single-ended analog input
Taxa de amostragem 200 ksps
Supply Voltage Minimum 2.7 V
Interface SPI-compatible serial interface
Architecture SAR ADC
Encapsulamento 8-pin TSSOP
Tipo de montagem Surface mount
Faixa de temperatura de operação -40C to +85C
Automotive Qualification AEC-Q100

Guia de Configuração de Pinos do MCP3001T-I/ST 8-pin tssop

Configuração de pinos para MCP3001T-I/ST (pacote 8-pin tssop). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 8-pin tssop para MCP3001T-I/ST

Nenhum dado detalhado de pinagem disponível para MCP3001T-I/ST.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MCP3001T-I/ST é adequado para 6 aplicaçãos: Temperature Sensing, Potentiometer and Position Measurement, Industrial Control and Monitoring, Consumer Electronics and Embedded Control, Low-Speed Data Acquisition, Automotive Sensing.

🌡️

Temperature Sensing

The MCP3001T-I/ST is suitable for digitizing temperature-probe signals in compact embedded controllers. A thermistor, RTD, or semiconductor sensor can be connected to the single analog input after suitable excitation and filtering. The 10-bit resolution provides 1,024 codes, and the SPI-compatible interface transfers each result to a microcontroller. Because the converter uses a reference voltage, accurate temperature readings depend on reference stability, sensor tolerances, and front-end design.

🎛️

Potentiometer and Position Measurement

The MCP3001T-I/ST can measure a resistive divider output representing rotary position, slider movement, or another mechanical variable. Its 200 ksps maximum sampling rate provides more than enough capability for many slow position-control loops, while the 10-bit resolution quantizes the selected reference range into 1,024 levels. The analog divider should be powered and referenced carefully to reduce noise and ensure that the output remains inside the converter's permitted input range.

🏭

Industrial Control and Monitoring

The MCP3001T-I/ST is useful in industrial monitoring modules that digitize a single analog process variable, such as pressure, level, or a scaled control signal. The SAR architecture supports predictable conversion behavior, and the SPI interface keeps the connection to a controller compact. Industrial deployments should include input protection, filtering, calibration, and a stable reference. Confirm the device's operating limits against the actual process environment before production release.

📱

Consumer Electronics and Embedded Control

The low 2.7 V minimum supply and compact TSSOP package make the MCP3001T-I/ST appropriate for embedded consumer devices that need one analog measurement channel. It can digitize a potentiometer, light-sensor divider, or condition-control signal without occupying a wide parallel interface. Firmware must implement the manufacturer's SPI transaction sequence, and the power supply and reference network should be designed to meet the ADC's timing and noise requirements.

📊

Low-Speed Data Acquisition

The MCP3001T-I/ST can serve as the conversion element in a small, low-speed data-acquisition system when only one channel is required at a time. Its maximum 200 ksps rate supports moderately responsive acquisition while the 10-bit result provides a straightforward digital format for a microcontroller or data logger. For multichannel systems, pair the converter with a suitable analog multiplexer or select a multi-channel ADC, while preserving the analog bandwidth and settling requirements.

🚗

Automotive Sensing

The MCP3001T-I/ST is identified as an AEC-Q100 automotive-qualified device, making it a candidate for qualified sensing and control functions where a single analog channel is needed. The 8-pin TSSOP package supports compact PCB layouts, and the SPI interface allows connection to an automotive embedded controller. Qualification status should be confirmed against the vehicle program requirements, including temperature grade, documentation, and validation expectations.

What is the MCP3001T-I/ST?
The MCP3001T-I/ST is a Microchip Technology 10-bit, single-channel SAR analog-to-digital converter with an SPI-compatible interface. According to the manufacturer product information, it combines high performance, low power consumption, and a small package for embedded control applications. The device operates from 2.7 V and supports conversion rates up to 200 ksps in an 8-pin TSSOP package.
What is the resolution of the MCP3001T-I/ST?
The MCP3001T-I/ST provides 10-bit resolution, representing an analog input with 1,024 digital codes. The manufacturer identifies the converter as a SAR ADC, which performs successive approximation during each conversion. Actual measurement accuracy depends on reference-voltage accuracy, input conditioning, noise, and the analog signal level relative to the selected reference.
How many channels does the MCP3001T-I/ST have?
The MCP3001T-I/ST has one analog input channel. The Microchip product page describes the MCP3001 as a single-channel SAR ADC suitable for embedded control. If a design requires multiple simultaneous measurements, an external multiplexer or a multi-channel ADC should be evaluated instead of assuming that the MCP3001 can acquire more than one channel.
What is the sampling rate of the MCP3001T-I/ST?
The MCP3001T-I/ST supports sampling rates up to 200 ksps, according to the product listing. The maximum conversion rate is useful for fast-changing or multiplexed signals, but the complete acquisition system must also satisfy the SPI clock and timing requirements. Use the manufacturer datasheet for the detailed timing diagram and operating conditions.
What supply voltage does the MCP3001T-I/ST require?
The MCP3001T-I/ST has a 2.7 V minimum operating supply voltage, as stated in the distributor product description. The device is therefore suitable for low-voltage embedded systems. The exact maximum supply voltage and operating limits should be confirmed in the manufacturer datasheet before final circuit sign-off.
What interface does the MCP3001T-I/ST use?
The MCP3001T-I/ST uses an SPI-compatible serial interface with clock, data input, data output, and chip-select signaling. This interface allows the converter to connect to an embedded controller without requiring a parallel data bus. Firmware must implement the command and sampling sequence described by the manufacturer, including setup time and conversion-read timing.
Where can I download the MCP3001T-I/ST datasheet PDF?
The manufacturer product page for MCP3001 is the appropriate starting point for the device datasheet and supporting documentation. The verified search results also identify the MCP3001T-I/ST datasheet through the Microchip product listing and the product-specific document page. Use the manufacturer PDF for authoritative pin names, timing limits, electrical characteristics, and recommended application circuits.
Where can I find the MCP3001T-I/ST pinout?
The MCP3001T-I/ST uses an 8-pin TSSOP package, and the complete numbered pin-description table is in the manufacturer datasheet. Assign PCB nets from that table rather than inferring pin names from a generic SPI device. The 8-pin package also requires attention to exposed thermal and soldering considerations specified for the exact ordering code.
Can the MCP3001T-I/ST replace the MCP3001-I/ST?
The MCP3001-I/ST is the closest verified same-family alternative and is listed in comparison data as another 10-bit, 2.7 V, single-channel SPI ADC in an 8-pin TSSOP. The MCP3001T-I/ST adds the T temperature-grade designation and is identified as AEC-Q100 automotive-qualified. Final substitution should confirm the manufacturer ordering table, temperature grade, and AEC-Q100 requirements.
What is the best drop-in replacement for the MCP3001T-I/ST?
The MCP3001-I/ST is the strongest verified same-package candidate because the comparison data describes it as a 10-bit, 2.7 V, single-channel SPI ADC in an 8-pin TSSOP. The principal difference is the ordering-grade and qualification designation: MCP3001T-I/ST is marked AEC-Q100 in the product listing. Confirm whether the replacement must preserve automotive qualification before approving it.
What can replace the MCP3001T-I/ST in an embedded design?
The MCP3001-I/ST is a candidate for replacement when the design requires the same 10-bit, single-channel, 2.7 V-class SPI ADC in an 8-pin TSSOP footprint. It is not automatically equivalent in qualification: the MCP3001T-I/ST carries the T designation and AEC-Q100 marking. Review the full electrical table and qualification requirements before using it as a production substitute.
Is the MCP3001T-I/ST suitable for temperature sensing?
The MCP3001T-I/ST is suitable for many temperature-sensing applications when the sensor produces an analog voltage within the ADC input and reference limits. A thermistor, RTD, or semiconductor sensor may require excitation, filtering, and linearization. The ADC provides 1,024 codes, so system-level accuracy will often be limited by the sensor, reference, and analog front end rather than by the converter alone.
Is the MCP3001T-I/ST suitable for automotive applications?
The MCP3001T-I/ST is identified as an automotive AEC-Q100 part in the verified product listing, and the ordering suffix indicates the extended temperature grade. Automotive suitability still depends on the complete vehicle-level requirements, including qualification documentation, operating conditions, and system validation. Do not substitute a non-automotive grade solely because the package and basic specifications match.
Where can I buy the MCP3001T-I/ST and what is its price?
The MCP3001T-I/ST is available through the distributor channels identified on this page, but the current commercial details should be requested through XAIPART's Request a Quote form. The verified listing confirms the part number, 10-bit SAR ADC, 200 ksps operation, 8-pin TSSOP package, and AEC-Q100 designation. Request a quote for current pricing, stock, and lead time.
How long is the lead time for the MCP3001T-I/ST?
The current lead time for the MCP3001T-I/ST is not established by the manufacturer information and should be requested through XAIPART's Request a Quote form. For production planning, request the quantity, date code requirement, target package, and delivery destination. The product listing confirms the ordering code and automotive qualification, but it does not provide a reliable lead-time commitment.
What are the key specifications of the MCP3001T-I/ST that engineers should know?
The MCP3001T-I/ST is a 10-bit, single-channel SAR ADC with a maximum sampling rate of 200 ksps, a 2.7 V minimum supply, and an SPI-compatible interface. It is packaged in an 8-pin TSSOP and is identified as AEC-Q100 automotive-qualified. The 10-bit resolution equals 1,024 codes, while reference accuracy and analog-front-end design determine practical measurement performance.
Is the MCP3001T-I/ST the same as MCP3001-I/ST?
They are closely related 10-bit, single-channel, 2.7 V-class SPI ADCs in an 8-pin TSSOP package, but their ordering grades are not identical. MCP3001T-I/ST includes the T grade and the product listing identifies AEC-Q100 qualification, whereas MCP3001-I/ST is the non-T listed configuration. Use the manufacturer ordering information to determine whether the qualification difference matters to the application.

Dados de referência de engenharia para MCP3001T-I/ST — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose MCP3001T-I/ST when the design needs a compact, 10-bit, single-channel SPI ADC and requires the automotive-grade T ordering designation or AEC-Q100 qualification. Its 2.7 V minimum supply and 200 ksps maximum sampling rate fit low-voltage embedded systems, temperature sensing, potentiometer measurement, and basic industrial monitoring. MCP3001-I/ST is the closest verified same-package alternative when the mechanical footprint, 10-bit resolution, single-channel arrangement, and SPI interface are the priorities, but its qualification status differs from the T grade. Do not select either part without checking the exact reference range, input limits, electrical accuracy, and timing requirements in the manufacturer datasheet. For designs needing multiple simultaneous channels, consider a multi-channel ADC instead of adding unsupported assumptions to the MCP3001's single-input architecture.

Comparação com alternativas

Parâmetro Este produto MCP3001-I/ST
Package 8-pin TSSOP 8-pin TSSOP
Brand Microchip Technology Microchip Technology
ADC Resolution 10 bit 10 bit
Number of Channels 1 1
Architecture SAR SAR
Minimum Supply Voltage 2.7 V 2.7 V
Interface SPI-compatible SPI

Principais diferenciais

  • Automotive-qualified ordering option (vs MCP3001-I/ST)
  • Single-channel SAR architecture for compact embedded designs (vs MCP3001-I/ST)
  • 200 ksps maximum sampling rate (vs MCP3001-I/ST)

Notas de projeto

Keep the reference and analog-input traces short, and place their associated bypass or filtering capacitors close to the MCP3001T-I/ST pins. Route analog input signals away from SPI clock and high-current digital traces. The single-input architecture makes board-area savings possible, but the analog return path and reference layout should still be treated as high-impedance signal paths.

Use the manufacturer's SPI timing requirements when setting clock rate, chip-select polarity, and sample timing. Account for conversion time, data-valid timing, and controller pin capacitance. If the analog source has high source impedance, add an appropriate buffer or longer acquisition settling time rather than increasing the SPI clock beyond the supported operating condition.

Do not treat the 10-bit nominal resolution as guaranteed end-to-end accuracy. Reference tolerance, reference noise, sensor error, input filtering, PCB leakage, and quantization all contribute to the final measurement uncertainty. Use the manufacturer electrical characteristics to choose the reference and analog components, and include calibration when the application requires better repeatability or absolute accuracy.

The 8-pin TSSOP package is compact, so check the power dissipation and the PCB copper available for heat spreading. Use the package thermal information and the application's ambient-temperature limits when selecting the board construction and placement. Good copper connection around the device and avoidance of thermally aggressive neighboring parts help maintain reliable operation.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The verified product listing identifies the MCP3001T-I/ST with an AEC-Q100 automotive designation and an operating temperature range of -40C to +85C. Other compliance attributes are not established by the manufacturer page excerpts.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MCP3001T-I/ST datasheet MCP3001T-I/ST pinout MCP3001T-I/ST datasheet pdf MCP3001T-I/ST equivalent MCP3001T-I/ST replacement MCP3001T-I/ST cross reference MCP3001T-I/ST footprint MCP3001T-I/ST application circuit MCP3001T-I/ST price MCP3001T-I/ST stock Microchip MCP3001T-I/ST MCP3001T-I/ST 10 bit ADC MCP3001T-I/ST 200 ksps MCP3001T-I/ST TSSOP MCP3001T-I/ST vs MCP3001-I/ST

Componentes & termos relacionados

Microchip Technology MCP3001T-I/ST MCP3001-I/ST 10-bit ADC analog-to-digital converter successive approximation register SAR SPI embedded control 2.7 V supply 200 ksps 10-bit resolution 1,024 codes 8-pin TSSOP surface-mount package AEC-Q100 RoHS REACH reference voltage temperature sensing potentiometer measurement industrial monitoring automotive sensing single-channel ADC analog-to-digital interface
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ