MCP3461T-E/NC - 16-Bit 153.6 ksps ADC | Microchip
N.º da peça: MCP3461T-E/NC ✓ AtivoMCP3461T-E/NC Visão geral
An ADC is an interface IC that converts an analog voltage into a digital value for processing by a microcontroller, DSP, FPGA, or data-acquisition system. The MCP3461 belongs to the delta-sigma ADC family, which uses continuous-time sampling and digital filtering to provide high resolution and noise performance. It sits within the broader analog-to-digital converter and data-acquisition semiconductor hierarchy.
The principal device characteristics are 16-bit resolution, one analog input, operation from a 3 V supply, and conversion throughput up to 153.6 ksps. The low-noise architecture makes the converter appropriate for slow or medium-speed measurements where input signals must be resolved accurately. Its compact 20-UQFN package also supports space-constrained instrumentation and embedded control designs.
The MCP3461 family supports single, differential, and multiplexed measurement arrangements depending on the selected device and system configuration. Digital communication through a serial interface allows conversion results to be transferred efficiently to a host processor. Because the MCP3461T-E/NC does not include the onboard voltage reference offered by the MCP3461R, the system must provide an appropriate external reference.
Typical uses include industrial process measurement, precision instrumentation, sensor acquisition, laboratory equipment, and low-bandwidth communication receivers. In these systems, the ADC converts a conditioned sensor or control signal into a digital value while the delta-sigma filtering helps suppress out-of-band noise.
Designers should pay particular attention to reference-voltage accuracy, analog input range, source impedance, sampling behavior, digital-interface timing, and decoupling. The 3 x 3 mm UQFN package also requires a land pattern capable of supporting its exposed thermal pad and adequate copper area for stable operation.
This page combines the manufacturer product information, exact MPN attributes, package details, verified source links, drop-in family guidance, and practical design considerations to simplify component selection and board-level implementation.
Alternativas drop-in para MCP3461T-E/NC — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MCP3461T-E/NC (mesmo formato e footprint) — diferindo em Package.
MCP3461R-E/ST
✅ Drop-InConsulte o preço
Ver ficha técnica →MCP3461T-E/NC Classificações máximas e características elétricas
| ADC Type | Delta-sigma ADC |
| Resolução | 16 bit |
| Number of Input Channels | 1 channel |
| Maximum Sampling Rate | 153.6 ksps |
| Tensão de alimentação | 3 V |
| Noise Characteristic | Low noise |
| Encapsulamento | 20-UQFN, 3 x 3 mm |
| Exposed Pad | Yes |
| Tipo de montagem | Surface mount |
| Internal Voltage Reference | Not included |
| Package Dimensions | 3 x 3 mm |
Guia de Configuração de Pinos do MCP3461T-E/NC 3 x 3 mm
Configuração de pinos para MCP3461T-E/NC (pacote 3 x 3 mm). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para MCP3461T-E/NC.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MCP3461T-E/NC é adequado para 6 aplicaçãos: Industrial Process Measurement, Precision Instrumentation, Sensor Acquisition Front Ends, Low-Bandwidth Communications Receivers, Data Acquisition and Monitoring, Embedded Control Systems.
Industrial Process Measurement
The MCP3461T-E/NC fits process-measurement front ends that convert conditioned pressure, temperature, level, or flow signals into high-resolution digital measurements. Its 16-bit delta-sigma architecture, low-noise characterization, and conversion rate up to 153.6 ksps provide a useful balance between resolution and throughput for supervisory control and data-logging systems. Place the converter behind an input filter, protection network, and low-impedance driver where required. Because MCP3461T-E/NC operates from 3 V and does not include an onboard reference, the design must allocate an accurate external reference and suitable analog decoupling. MCP3461R is a practical alternative when its integrated reference simplifies the reference network without changing the pin arrangement.
Recomendado
Precision Instrumentation
The MCP3461T-E/NC is suitable for laboratory and bench instruments that acquire low-bandwidth analog measurements with 16-bit resolution. Delta-sigma filtering supports measurements where low noise is more valuable than very high conversion speed, while the 153.6 ksps maximum rate supports multiplexed or moderately paced acquisition channels. The analog input should be conditioned so that the selected operating mode and external reference voltage remain within the device limits. Use careful grounding and filtering around the reference and analog pins to preserve measurement integrity. For new instrument designs, MCP3461R is worth evaluating because its onboard voltage reference can reduce reference-component count while preserving the manufacturer-stated pin compatibility.
Recomendado
Sensor Acquisition Front Ends
The MCP3461T-E/NC can serve as the conversion stage in bridge, resistive, current-loop, or buffered sensor interfaces when the required signal bandwidth is modest. Its low-noise 16-bit conversion and single-input architecture are appropriate for digitizing slow or continuously changing sensor outputs, while the compact 3 x 3 mm package preserves board area. The sensor signal path needs suitable gain, filtering, input-range matching, and protection before conversion. Because the device does not contain its own voltage reference, reference drift and noise directly affect measurement accuracy and must be included in the analog error budget. MCP3461R may simplify new designs where the integrated reference satisfies the required accuracy and noise targets.
Recomendado
Low-Bandwidth Communications Receivers
The MCP3461T-E/NC is applicable to receivers that digitize low-bandwidth, envelope-like, or control signals requiring greater resolution than a conventional low-cost ADC. The 16-bit delta-sigma conversion can capture slowly varying information while rejecting out-of-band noise through its digital filtering behavior. Designers should place the analog front end close to the converter, control return paths, and provide an appropriate low-noise reference. The 153.6 ksps ceiling is ample for many low-bandwidth signals but does not replace the sampling requirements of high-speed modulation. If a new board can benefit from a simplified reference design, MCP3461R provides the same package-level placement option with an onboard voltage reference.
Recomendado
Data Acquisition and Monitoring
The MCP3461T-E/NC supports compact data-acquisition and monitoring modules that need precise conversion in a small PCB area. One analog input, 16-bit resolution, and a maximum rate of 153.6 ksps suit monitoring loops that sample slowly varying process or equipment signals. Place input conditioning and protection ahead of the ADC, and connect the external reference to a low-noise source capable of meeting the system's calibration requirement. The 3 V supply architecture can simplify integration with modern embedded systems when the board already supports that rail. MCP3461R should be considered for new designs that would otherwise require a discrete reference assembly, provided its integrated-reference characteristics satisfy the measurement specification.
Recomendado
Embedded Control Systems
The MCP3461T-E/NC can serve as an analog measurement front end for embedded control equipment that monitors analog quantities while a microcontroller executes control functions. The delta-sigma ADC's 16-bit resolution can preserve detail in slow feedback signals, and its 153.6 ksps rate is suitable for control loops that do not require high-speed conversion. The digital interface should be connected according to the manufacturer's timing and logic-level requirements, with attention to grounding between the analog and digital sections. Since MCP3461T-E/NC requires an external reference, validate its startup, stability, and calibration behavior over the complete environmental range. MCP3461R is a natural candidate for a new design when eliminating the external-reference block is more valuable than retaining the original external-reference architecture.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MCP3461T-E/NC — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MCP3461R |
|---|---|---|
| Package | 20-UQFN (3 x 3 mm) | 20-UQFN (3 x 3 mm), manufacturer-identified pin compatibility |
| Brand | Microchip Technology | Microchip Technology |
| Onboard Voltage Reference | Not included | Included |
| New-Design Status | MCP3461 family variant | Preferred, pin-compatible option for new MCP3461 designs |
| Pricing | Request a Quote | Request a Quote |
Principais diferenciais
- Manufacturer-supported pin-compatible upgrade path (vs MCP3461R)
- Choice between external and integrated voltage reference (vs MCP3461R)
- Compact high-resolution conversion (vs MCP3461R)
Notas de projeto
Do not treat the MCP3461R substitution as electrically identical to MCP3461T-E/NC. Although Microchip identifies MCP3461R as pin compatible, it adds an onboard voltage reference that the MCP3461T-E/NC does not include. Before replacing the component, verify that the external reference network can be removed or isolated and that the integrated reference meets the required accuracy, noise, startup, and calibration targets.
Follow the manufacturer land pattern for the 20-UQFN 3 x 3 mm package and connect the exposed pad as specified in the datasheet. Place input, reference, and decoupling components close to their associated pins, and keep the analog reference path away from digital return currents. Adequate exposed-pad copper improves heat transfer and helps the compact assembly operate reliably under the intended loading.
The external reference used with MCP3461T-E/NC can contribute directly to gain accuracy and conversion noise. Use a low-noise reference, short routing, suitable decoupling, and a return path that does not share high-current digital returns. Confirm the reference voltage and analog input limits against the device documentation, then validate noise and linearity on the assembled PCB rather than relying only on isolated IC measurements.
Plan the 3 V supply path around the device's operating and current requirements documented by the manufacturer. Place local high-frequency decoupling at the supply pins and provide appropriate analog and digital grounding to prevent supply disturbance from appearing at the conversion result. A 153.6 ksps maximum conversion rate does not by itself determine average power use; operating mode, output data rate, and analog activity also matter.
Informações de conformidade
Compliance declarations for the exact MCP3461T-E/NC order code were not identified in the available product information. Confirm RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification requirements with the manufacturer before production release.