Microchip Technology

MCP6007-E/SN - Dual 1MHz RRIO Op Amp | Microchip

N.º da peça: MCP6007-E/SN ✓ Ativo
1.8 V Vdss 70 µA maximum per amplifier Id 8-pin SOIC Package
MOQ: 1 |

MCP6007-E/SN Visão geral

The Microchip Technology MCP6007-E/SN is a dual, general-purpose operational amplifier featuring a 1 MHz typical gain-bandwidth product, 1.9 V/µs typical slew rate, and rail-to-rail input and output operation in an 8-pin SOIC package. It operates from single supplies as low as 1.8 V, while the E-grade suffix identifies operation from -40°C to +125°C.

An operational amplifier is an analog signal-conditioning IC that uses high-gain differential feedback to amplify, buffer, filter, or isolate signals. The MCP6007 belongs to the broader hierarchy of operational amplifier, analog amplifier, signal-conditioning IC, and semiconductor. Rail-to-rail input operation permits signals to approach the supply limits, while rail-to-rail output improves output swing and makes the device useful in compact, low-voltage sensor and signal-processing systems.

The MCP6007 combines a 1 MHz typical gain-bandwidth product with rail-to-rail input and output capability. Maximum input offset voltage is ±1.6 mV, and maximum quiescent current is 70 µA per amplifier. The device is unity-gain stable and includes EMI filtering, making it suitable for direct sensor conditioning, low-frequency active filtering, voltage buffering, and general-purpose analog signal chains operating from low-voltage supply rails.

Its two amplifiers share the same supply pins but provide independent input and output pins, allowing simultaneous dual-channel signal processing. The 1.9 V/µs typical slew rate supports reasonably clean transitions in low-bandwidth applications. A 1 MHz gain-bandwidth product is more appropriate for precision, low-speed analog functions than for high-speed video, RF, or wideband pulse applications, while the low 70 µA maximum quiescent current per amplifier favors battery-operated equipment.

Typical uses include bridge-amplifier signal conditioning for resistive sensors, active low-pass filters, audio input buffers, portable instrumentation, and low-current sensor interfaces. Because the MCP6007 supports rail-to-rail input and output, it is particularly useful when the signal span is close to the available supply voltage. Supply bypass capacitors close to the power pins remain essential for stable operation in practical layouts.

The primary design trade-off is bandwidth: the 1 MHz gain-bandwidth product limits large-signal response and closed-loop performance at higher frequencies. Designers should also check noise, output-current capability, and stability with the selected feedback network for each gain setting. The E-grade temperature range supports industrial environments, but the SOIC-8 package is larger than modern leadless alternatives.

This page combines the manufacturer’s electrical characteristics with package, sourcing, comparison, and design guidance for engineers evaluating the MCP6007-E/SN in low-voltage dual-amplifier circuits. It also identifies pin-compatible family alternatives and highlights the measured differences that matter when reusing an existing 8-pin SOIC layout.

Alternativas drop-in para MCP6007-E/SN — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

MCP6001-E/SN

✅ Drop-In ⚠️ Especificações não verificadas
📦 8-pin SOIC
Two amplifiers, 1 MHz typical gain-bandwidth product, and SOIC-8 footprint are retained; maximum input offset voltage is approximately ±4.5 mV versus ±1.6 mV, an increase of 2.9 mV.

📋 Alternativa de referência (fora do catálogo)

MCP6002-E/SN

✅ Drop-In ⚠️ Especificações não verificadas
📦 8-pin SOIC
Two amplifiers, 1 MHz typical gain-bandwidth product, and SOIC-8 footprint are retained; maximum input offset voltage is approximately ±4.5 mV versus ±1.6 mV, an increase of 2.9 mV.

📋 Alternativa de referência (fora do catálogo)

MCP6004-E/SN

✅ Drop-In ⚠️ Especificações não verificadas
📦 8-pin SOIC
Two amplifiers, 1 MHz typical gain-bandwidth product, and SOIC-8 footprint are retained; maximum input offset voltage is approximately ±3 mV versus ±1.6 mV, an increase of 1.4 mV.

📋 Alternativa de referência (fora do catálogo)

MCP6007-E/SNVAO

✅ Drop-In
📦 8-pin SOIC
The dual 1 MHz MCP6007 electrical configuration and SOIC-8 footprint are retained, while the ordering option adds automotive qualification and may impose different automotive-specific ordering conditions.

📋 Alternativa de referência (fora do catálogo)

MCP6007-E/SN Classificações máximas e características elétricas

Amplifier Count 2 amplifiers
Product Type General-purpose operational amplifier
Gain-Bandwidth Product 1 MHz typical
Slew Rate 1.9 V/µs typical
Minimum Supply Voltage 1.8 V
Maximum Supply Voltage 5.5 V
Input Offset Voltage ±1.6 mV maximum
Corrente de repouso 70 µA maximum per amplifier
Input Common-Mode Range Rail-to-rail
Output Voltage Swing Rail-to-rail
Gain Stability Unity-gain stable
EMI Filtering Yes
Faixa de temperatura de operação -40°C to +125°C
Encapsulamento 8-pin SOIC
Tipo de montagem Surface mount
Status RoHS Compliant

Configuração de pinos do MCP6007-E/SN

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pino 1 OUTA — Operational amplifier A output
Pino 2 INA− — Operational amplifier A inverting input
Pino 3 INA+ — Operational amplifier A non-inverting input
Pino 4 V− — Negative supply or ground connection
Pino 5 INB+ — Operational amplifier B non-inverting input
Pino 6 INB− — Operational amplifier B inverting input
Pino 7 OUTB — Operational amplifier B output
Pino 8 V+ — Positive supply connection

Aplicações típicas

MCP6007-E/SN é adequado para 6 aplicaçãos: Low-Voltage Sensor Signal Conditioning, Portable Battery-Powered Instrumentation, Active Low-Pass Filtering, Audio and Communication Input Buffering, Industrial Control Signal Interfaces, Power-Supply Feedback Buffering.

🏭

Low-Voltage Sensor Signal Conditioning

The MCP6007-E/SN suits resistive bridge sensors, temperature sensors, and other low-level differential sources that require two amplifiers in a compact circuit. Its ±1.6 mV maximum input offset voltage helps limit static error, while the 1 MHz gain-bandwidth product provides useful bandwidth for signals well below the kHz range. Rail-to-rail input operation allows the input common-mode voltage to approach the supply limits, which is valuable with 1.8 V to 5.5 V supplies. A common arrangement uses one channel for buffering and gain, and the second channel for gain or filtering. The designer should verify the sensor’s excitation level and the amplifier’s output swing under the intended load.

📱

Portable Battery-Powered Instrumentation

The MCP6007-E/SN is appropriate for handheld meters and battery-operated measurement equipment where each amplifier contributes to a maximum quiescent current of 70 µA. The 1.8 V minimum supply permits operation from low-energy rails, and rail-to-rail input and output improve usable signal range without requiring a higher supply voltage. The two channels can condition two sensor inputs or provide a differential amplifier followed by an output buffer. Because the gain-bandwidth product is 1 MHz typical, the design should limit signal bandwidth and account for noise gain at the selected closed-loop gain. Stable operation also requires the datasheet-recommended supply bypass capacitance and short feedback paths.

🌐

Active Low-Pass Filtering

The MCP6007-E/SN can implement active low-pass filters for sensor noise reduction, audio-frequency smoothing, or control-signal conditioning. Its unity-gain stability supports a follower configuration, and the 1 MHz typical gain-bandwidth product allows useful closed-loop bandwidth in low-frequency filter stages. Two independent amplifiers can implement a two-pole filter or separate filtering channels. Component tolerances and the amplifier’s finite gain-bandwidth product influence the actual cutoff and phase response, so simulation with realistic op-amp models is recommended. Decoupling capacitors should be placed directly across the supply pins, while resistor and capacitor connections around the feedback network should remain compact to reduce parasitic coupling.

🎧

Audio and Communication Input Buffering

The MCP6007-E/SN can buffer low-level audio or communication inputs when the design operates within the amplifier’s 1 MHz bandwidth and low-frequency signal range. Rail-to-rail input and output operation helps preserve signal amplitude near the supply rails, while the 1.9 V/µs typical slew rate reduces distortion risk for moderate-amplitude waveforms. The dual configuration can drive one active speaker or provide input buffering for two channels. Designers should avoid treating the device as a wideband audio power amplifier; output-current limits, output-voltage swing, and load impedance must be checked against the intended drive level. A small isolation resistor near the output can also limit capacitive-load transients.

🏭

Industrial Control Signal Interfaces

The MCP6007-E/SN is suitable for low-speed industrial control boards that interface 0–5 V, 0–3.3 V, or other low-voltage sensor signals. The -40°C to +125°C E-grade temperature range supports extended ambient environments, while the 1.8 V operating limit supports modern low-voltage sensor and control platforms. Rail-to-rail inputs help accommodate signals spanning the working range of the rail, and unity-gain stability simplifies buffering and feedback calculations. For factory equipment, the final design should include protection against transients, ESD, and wiring faults because the amplifier itself is not a surge-protection device. Filtering near the connector and properly positioned bypass capacitors help reduce noise pickup and conducted interference.

⚡

Power-Supply Feedback Buffering

The MCP6007-E/SN can buffer a remote or high-impedance feedback signal in a low-power supply-control system. Its 70 µA maximum quiescent current per amplifier minimizes the load placed on the sensed rail, and rail-to-rail input operation improves measurement range near the supply endpoints. One channel can buffer the feedback node while the other performs gain or filtering, simplifying a dual-channel implementation. The 1 MHz typical gain-bandwidth product is adequate for slow regulation loops and supervisory measurements, but it is not intended for high-bandwidth compensation. Feedback-loop stability, injection current, and the output’s ability to remain in its linear region must be checked using the actual regulator topology before replacing a dedicated buffer.

Resumo dos produtos recomendados

MCP6007-E/SN Microchip Technology Usado em: Low-Voltage Sensor Signal Conditioning, Portable Battery-Powered Instrumentation, Active Low-Pass Filtering, Audio and Communication Input Buffering, Industrial Control Signal Interfaces, Power-Supply Feedback Buffering MCP6004-E/SN Pin-compatible dual amplifier for offset-tolerant sensor circuits Usado em: Low-Voltage Sensor Signal Conditioning, Power-Supply Feedback Buffering MCP6002-E/SN Pin-compatible alternative for general-purpose battery circuits Usado em: Portable Battery-Powered Instrumentation MCP6001-E/SN Pin-compatible dual amplifier for nonprecision filters Usado em: Active Low-Pass Filtering MCP6007-E/SNVAO Automotive-qualified ordering option for vehicle audio interfaces Usado em: Audio and Communication Input Buffering, Industrial Control Signal Interfaces
What are the key specifications of MCP6007-E/SN that engineers should know?
The MCP6007-E/SN is a dual, 1 MHz gain-bandwidth operational amplifier with rail-to-rail input and output, a 1.9 V/µs typical slew rate, and operation from 1.8 V to 5.5 V. According to the Microchip MCP6006/6R/6U/7/9 datasheet, maximum input offset voltage is ±1.6 mV and maximum quiescent current is 70 µA per amplifier. It is unity-gain stable, includes EMI filtering, and operates across -40°C to +125°C in an 8-pin SOIC package.
What is the operating voltage of MCP6007-E/SN?
The MCP6007-E/SN operates from a single supply of 1.8 V to 5.5 V. The Microchip MCP6006/6R/6U/7/9 datasheet identifies 1.8 V as the minimum operating supply, allowing both amplifiers to operate directly from low-voltage rails. Rail-to-rail input and output operation also supports signal ranges that extend toward the supply limits, although the exact usable input and output range depends on load current and supply voltage.
Where can I download the MCP6007-E/SN datasheet PDF?
The MCP6007-E/SN datasheet PDF is available from Microchip Technology through the official MCP6006/6R/6U/7/9 family datasheet. It contains the electrical characteristics, pin descriptions, typical performance curves, application information, and package drawings for the MCP6007. Use the manufacturer’s PDF rather than a distributor summary when assigning pins, calculating noise performance, checking common-mode limits, or determining the derating requirements for the SOIC-8 package.
Where can I find the MCP6007-E/SN pinout?
The MCP6007-E/SN uses an 8-pin SOIC configuration with two independent operational amplifiers. According to the Microchip MCP6006/6R/6U/7/9 datasheet, the connections are OUTA at pin 1, INA− at pin 2, INA+ at pin 3, V− at pin 4, INB+ at pin 5, INB− at pin 6, OUTB at pin 7, and V+ at pin 8. Pin 4 connects to ground for single-supply operation.
Is MCP6007-E/SN rail-to-rail input and output?
Yes, the MCP6007-E/SN provides rail-to-rail input and output operation. The Microchip MCP6006/6R/6U/7/9 datasheet confirms that the input common-mode range reaches the supply rails and that the output can swing toward the rails. This behavior is useful in sensor interfaces where the signal occupies much of the available supply range, although designers should consult the datasheet graphs for output swing under the intended load and frequency.
What can replace MCP6007-E/SN?
The MCP6001-E/SN, MCP6002-E/SN, MCP6004-E/SN, and MCP6007-E/SNVAO are pin-compatible 8-pin SOIC options within the same Microchip family. The first three retain two amplifiers and a 1 MHz typical gain-bandwidth product but have higher maximum input-offset-voltage limits of approximately ±4.5 mV, ±4.5 mV, and ±3 mV, respectively. The MCP6007-E/SNVAO retains the MCP6007 electrical class while adding an automotive qualification ordering option.
What is the best drop-in replacement for MCP6007-E/SN?
The MCP6007-E/SNVAO is the closest drop-in choice because it retains the dual 1 MHz amplifier configuration, rail-to-rail input and output operation, and 8-pin SOIC footprint while adding automotive qualification. MCP6001-E/SN, MCP6002-E/SN, and MCP6004-E/SN are also pin-compatible replacements for lower-cost designs, but their specified maximum offset voltages differ from the MCP6007-E/SN’s ±1.6 mV limit, so they are better suited to less precision-sensitive signal paths.
MCP6007-E/SN vs MCP6004-E/SN: which is better for precision sensing?
Choose the MCP6007-E/SN when input offset voltage is critical because its maximum is ±1.6 mV, compared with approximately ±3 mV for the MCP6004-E/SN. Both provide two amplifiers, rail-to-rail input and output, unity-gain stability, and a 1 MHz typical gain-bandwidth product in 8-pin SOIC packages. The MCP6004 can still be appropriate when the sensor and conditioning gains keep offset error below the system’s error budget.
When should I choose MCP6007-E/SN over MCP6001-E/SN?
Choose the MCP6007-E/SN when a ±1.6 mV maximum input-offset-voltage specification provides useful margin in a precision sensor interface. The MCP6001-E/SN is otherwise similar in topology and package, with two amplifiers, rail-to-rail operation, and a 1 MHz typical gain-bandwidth product, but its maximum input offset voltage is approximately ±4.5 mV. Use the lower-offset device when amplification of small differential signals makes static offset the dominant error term.
Is MCP6007-E/SN suitable for low-power sensor applications?
Yes, the MCP6007-E/SN is suitable for low-power sensor conditioning when the required bandwidth remains below its 1 MHz typical gain-bandwidth product. The Microchip family datasheet specifies a maximum quiescent current of 70 µA per amplifier, while rail-to-rail input and output operation improves signal utilization at low supply voltages. A typical bridge-sensor application places the two amplifiers in differential input and differential-output stages while keeping the operating frequency well below the amplifier’s bandwidth limit.
How much thermal dissipation does MCP6007-E/SN produce?
The MCP6007-E/SN normally dissipates little heat because its maximum quiescent current is only 70 µA per amplifier at a supply of up to 5.5 V. Estimated: using 5.5 V and 70 µA per amplifier gives approximately 0.385 mW per channel, or about 0.77 mW for both channels under the maximum quiescent-current condition. Actual dissipation increases with output current and depends on the SOIC-8 thermal resistance and board copper.
Where to buy MCP6007-E/SN online?
Use the Request a Quote form on this page to request MCP6007-E/SN pricing, stock confirmation, and lead time. The quote form is the appropriate commercial channel because current availability, order quantities, and shipment timing can change independently of the device’s technical specifications. When requesting a quote, specify the required delivery quantity and packaging format so the supplier can confirm the correct 8-pin SOIC supply configuration.
What is the price of MCP6007-E/SN?
Use the Request a Quote form on this page for the current MCP6007-E/SN unit price and quantity breaks. Pricing depends on order quantity, package form, stock position, and supply timing, so a static figure can become inaccurate quickly. The form allows a buyer to request current commercial terms without relying on an outdated listing or a price copied from another source.
What is the lead time and stock status for MCP6007-E/SN?
Submit the Request a Quote form on this page to confirm current MCP6007-E/SN stock, minimum order quantity, and lead time. The device is listed as active by the manufacturer, but production inventory and shipment schedules can vary by order quantity and packaging request. A written quotation provides the most appropriate confirmation for the exact quantity and delivery schedule required by the project.
Is MCP6007-E/SN RoHS compliant and automotive qualified?
The MCP6007-E/SN is identified as RoHS compliant, while the standard MCP6007-E/SN ordering option is not identified as an automotive-qualified variant. The MCP6007-E/SNVAO provides an automotive-qualified ordering option in the same family and package. According to Microchip ordering information, REACH, halogen-free, and conflict-minerals declarations for the selected standard part should be confirmed with the supplier before use in procurement documentation.

Dados de referência de engenharia para MCP6007-E/SN — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the MCP6007-E/SN for low-voltage dual-amplifier designs that benefit from a ±1.6 mV maximum input offset voltage, rail-to-rail input and output, and low quiescent current. It is a strong fit for bridge-sensor conditioning, active filtering, buffering, and low-power instrumentation using 1.8 V to 5.5 V supplies. Select MCP6004-E/SN when the approximately ±3 mV offset limit still meets the error budget and a different same-family offset grade is acceptable. MCP6001-E/SN and MCP6002-E/SN are also pin-compatible choices for less precision-sensitive dual-amplifier circuits, with maximum offset voltage near ±4.5 mV. Use MCP6007-E/SNVAO when automotive qualification is required. All four listed alternatives use the same 8-pin SOIC footprint and retain two channels and a 1 MHz typical gain-bandwidth product, but the standard MCP6007-E/SN offers the strongest specified offset-voltage limit of the non-automotive ordering options.

Comparação com alternativas

Parâmetro Este produto MCP6001-E/SN MCP6002-E/SN MCP6004-E/SN MCP6007-E/SNVAO
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Amplifier Count 2 amplifiers 2 amplifiers 2 amplifiers 2 amplifiers 2 amplifiers
Gain-Bandwidth Product 1 MHz typical 1 MHz typical 1 MHz typical 1 MHz typical 1 MHz typical
Input Offset Voltage ±1.6 mV maximum Approximately ±4.5 mV maximum Approximately ±4.5 mV maximum Approximately ±3 mV maximum ±1.6 mV maximum
Minimum Supply Voltage 1.8 V 1.8 V 1.8 V 1.8 V 1.8 V
Maximum Supply Voltage 5.5 V 5.5 V 5.5 V 5.5 V 5.5 V
Input and Output Operation Rail-to-rail input and output Rail-to-rail input and output Rail-to-rail input and output Rail-to-rail input and output Rail-to-rail input and output
Quiescent Current 70 µA maximum per amplifier 70 µA maximum per amplifier 70 µA maximum per amplifier 70 µA maximum per amplifier 70 µA maximum per amplifier
Gain Stability Unity-gain stable Unity-gain stable Unity-gain stable Unity-gain stable Unity-gain stable

Principais diferenciais

  • Lower maximum input offset voltage (vs MCP6004-E/SN)
  • Improved offset specification versus the MCP6001 family member (vs MCP6001-E/SN)
  • Automotive-qualified ordering option without changing the family footprint (vs MCP6007-E/SNVAO)

Notas de projeto

Place the supply bypass capacitor immediately between pins 8 and 4, with a short and low-inductance return path to the ground reference. The second amplifier may use the same supply pins, so its bypass connection should also be short. Keep the feedback resistors close to the relevant input pins and avoid routing high-impedance input traces beneath digital clock or switching-node copper. These layout practices reduce supply ripple coupling and parasitic oscillation.

Do not assume that a rail-to-rail input automatically supports every input condition at every supply voltage. Check the input common-mode range, output swing, and load current in the Microchip family datasheet, especially when operating near 1.8 V. Also avoid selecting the amplifier solely by its 1 MHz gain-bandwidth product: the closed-loop bandwidth, noise gain, slew rate, output loading, and temperature must all fit the signal being processed.

For a sensor interface, evaluate the complete error budget rather than offset voltage alone. Include sensor tolerance, resistor mismatch, input bias current, noise, amplifier drift, and ADC accuracy. With a 70 µA maximum quiescent current per amplifier and a 1 MHz typical gain-bandwidth product, the MCP6007-E/SN is best suited to low-speed, low-level analog channels; higher-frequency or source-impedance-sensitive designs may require a different amplifier family.

Informações de conformidade

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Qualified
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

RoHS compliance is stated in the product listing. The MCP6007-E/SNVAO is the automotive-qualified ordering option. REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated for the standard MCP6007-E/SN and remain unknown.

Dados verificados em: 2026-11-15 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MCP6007-E/SN datasheet MCP6007-E/SN pinout MCP6007-E/SN datasheet pdf MCP6007-E/SN equivalent MCP6007-E/SN replacement MCP6007-E/SN cross reference MCP6007-E/SN vs MCP6004-E/SN MCP6007-E/SN footprint MCP6007-E/SN spice model MCP6007-E/SN price MCP6007-E/SN stock Microchip MCP6007-E/SN MCP6007-E/SN application circuit MCP6007-E/SN SOIC-8 pinout

Componentes & termos relacionados

Microchip Technology MCP6007-E/SN MCP6001-E/SN MCP6002-E/SN MCP6004-E/SN MCP6007-E/SNVAO Operational amplifier Analog amplifier Signal-conditioning IC Dual amplifier Rail-to-rail input Rail-to-rail output Gain-bandwidth product Input offset voltage Quiescent current Unity-gain stable EMI filtering 1 MHz 1.9 V/µs 1.8 V to 5.5 V SOIC-8 Surface mount RoHS AEC-Q100 Sensor signal conditioning
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ