Microchip Technology

MCP6061-E/SN - 1.8V 730kHz Rail-to-Rail Op Amp | Microchip Technology

N.º da peça: MCP6061-E/SN ✓ Ativo
1.8 V to 6.0 V Vdss 60 µA typical per amplifier Id 8-SOIC, 0.154 inch width, 3.90 mm width Package
MOQ: 1 |

MCP6061-E/SN Visão geral

The Microchip Technology MCP6061-E/SN is a single, precision CMOS operational amplifier with rail-to-rail input and output operation, 1.8 V to 6.0 V supply capability, and a 730 kHz typical gain-bandwidth product. The device is supplied in an 8-pin SOIC package and is specified for extended-temperature operation. Its low input offset voltage, low bias current, and low quiescent current make it suitable for portable, battery-powered, and precision signal-conditioning systems.

An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages. The MCP6061 belongs to the CMOS operational-amplifier family within the broader voltage-amplifier and signal-chain hierarchy. Rail-to-rail inputs allow the input common-mode range to approach the supply rails, while rail-to-rail outputs improve output swing and system flexibility in low-voltage designs.

The MCP6061-E/SN provides a maximum input offset voltage of ±150 µV, a typical gain-bandwidth product of 730 kHz, and a typical quiescent current of 60 µA per amplifier. Its single-supply operating range of 1.8 V to 6.0 V supports low-energy sensor interfaces, portable measurement systems, and general-purpose analog signal conditioning. The unity-gain-stable architecture allows the device to be used directly as a voltage follower.

Microchip describes the MCP6061/2/4 family as a precision amplifier family implemented using an advanced CMOS process. The low-power architecture is useful when battery life is important, while the rail-to-rail characteristics reduce the need for negative supplies in single-supply systems. The 730 kHz bandwidth provides useful bandwidth for sensor signals and general-purpose closed-loop applications, although it is not intended for high-frequency video or RF signal paths.

Typical uses include sensor signal conditioning, battery-powered instrumentation, transducer interfaces, current measurement, voltage buffering, and embedded analog systems. The 8-SOIC package also makes the device convenient for through-hole assembly and prototype boards. Designers should verify the required output swing, input bias current, settling behavior, and stability configuration against the application’s signal level and impedance.

When using the MCP6061-E/SN, place input and feedback components close to the amplifier pins and maintain the recommended bypass capacitance near the supply pins. Check input common-mode voltage, output-current limits, and maximum supply voltage during startup and fault conditions. The low quiescent current supports portable designs, but the output drive and bandwidth should be matched to the load.

This product page combines the manufacturer’s amplifier specifications with practical selection criteria, package information, sourcing guidance, and same-footprint replacement options for engineers evaluating the MCP6061-E/SN.

Alternativas drop-in para MCP6061-E/SN — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

MCP6061T-E/SN

✅ Drop-In
📦 8-SOIC
Same MCP6061 family and 8-SOIC footprint; ordering suffix differs for tape-and-reel configuration

📋 Alternativa de referência (fora do catálogo)

MCP6071T-E/SN

✅ Drop-In
📦 8-SOIC
Same 8-SOIC single-op-amp footprint; MCP6071-family bandwidth and other electrical ratings differ

📋 Alternativa de referência (fora do catálogo)

MCP6V03T-E/SN

✅ Drop-In
📦 8-SOIC
Same 8-SOIC single-op-amp footprint; MCP6V03-family voltage-noise and performance specifications differ

📋 Alternativa de referência (fora do catálogo)

MCP6061-E/SN Classificações máximas e características elétricas

Amplifier Type Single general-purpose operational amplifier
Supply Voltage Range 1.8 V to 6.0 V
Input Offset Voltage ±150 µV maximum
Gain-Bandwidth Product 730 kHz typical
Corrente de repouso 60 µA typical per amplifier
Input Bias Current -1 pA to 5,000 pA
Input Offset Current -1 pA to 1 pA
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Gain Configuration Unity-gain stable
Number of Channels 1 channel
Faixa de temperatura de operação Extended temperature range
Encapsulamento 8-SOIC, 0.154 inch width, 3.90 mm width
Tipo de montagem Surface mount
Process Technology Advanced CMOS
Product Category Precision operational amplifier

Configuração de pinos do MCP6061-E/SN

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pino 1 OUT — Output voltage
Pino 2 V- — Negative supply or ground connection
Pino 3 +IN — Non-inverting input
Pino 4 V+ — Positive supply connection
Pino 5 -IN — Inverting input
Pino 6 OUT — Output voltage
Pino 7 V- — Negative supply or ground connection
Pino 8 V+ — Positive supply connection

Aplicações típicas

MCP6061-E/SN é adequado para 6 aplicaçãos: Battery-Powered Sensor Interface, Portable Medical Monitoring, Industrial Process Instrumentation, Low-Noise Voltage Buffer, Current-Shunt Measurement, Audio and Communication Interface.

🧩

Battery-Powered Sensor Interface

The MCP6061-E/SN is suitable for conditioning signals from resistive and low-power sensors in a compact, low-voltage system. Its 1.8 V to 6.0 V supply range and 60 µA typical quiescent current help reduce energy consumption, while rail-to-rail input operation helps preserve signal range near the supply limits. A typical arrangement places the sensor at the non-inverting input and uses feedback resistors for gain. Because input bias current can reach 5,000 pA, the source impedance and sensor leakage should be checked. The 730 kHz typical gain-bandwidth product is suitable for many slow-to-moderate-bandwidth measurements, but the amplifier is not intended for demanding high-speed sensor front ends.

💊

Portable Medical Monitoring

The MCP6061-E/SN can support low-level analog signal paths in portable monitoring equipment where supply voltage, power consumption, and input accuracy are important. Its ±150 µV maximum input offset voltage and low-bias-current CMOS architecture help reduce errors when buffering sensor outputs, while the 60 µA typical quiescent current is suitable for battery-operated instruments. The amplifier operates from 1.8 V, allowing direct interface to low-voltage sensor front ends when signal levels and safety requirements permit. Designers should confirm medical qualification requirements, patient-protection measures, noise performance, and the applicable output-swing limits before incorporating the device into a clinical system.

🏭

Industrial Process Instrumentation

The MCP6061-E/SN is appropriate for general-purpose industrial signal conditioning when the design uses a single low-voltage supply and does not require high-speed performance. It can buffer transducer outputs, amplify bridge or resistive-divider signals, and provide gain in feedback networks with a 730 kHz typical gain-bandwidth product. The low offset voltage helps preserve small-signal accuracy, and rail-to-rail input operation simplifies systems whose signals span much of the available supply range. Industrial designs should still account for electrical surge, temperature drift, grounding, common-mode rejection, and output-current limits. The device is suited to measurement and control channels rather than high-bandwidth communication links.

🔧

Low-Noise Voltage Buffer

The MCP6061-E/SN can be used as a unity-gain voltage buffer because the device is unity-gain stable and provides rail-to-rail output operation. In this configuration, the buffer isolates a high-impedance source from a downstream load while preserving the signal level within the available output-swing range. The 730 kHz typical gain-bandwidth product gives useful closed-loop response for many control, reference, and low-speed communication interfaces. Load capacitance, output stability, and source impedance should be evaluated carefully. The amplifier’s low quiescent current is valuable in portable equipment, while its offset and bias-current specifications should be compared with the source impedance for high-accuracy buffering.

⚡

Current-Shunt Measurement

The MCP6061-E/SN is suitable for amplifying the small voltage generated by a current-sense shunt in low-voltage power systems. The ±150 µV maximum input offset voltage helps resolve small shunt drops, while rail-to-rail input operation permits operation close to the supply rails when the signal and output requirements allow. The 60 µA typical quiescent current is attractive for battery-powered monitoring. Place the shunt and amplifier input nodes so that Kelvin connections minimize trace resistance and thermal errors. Confirm the maximum shunt voltage, amplifier input common-mode range, output swing, and power-supply variation before choosing the gain and feedback resistors.

🎧

Audio and Communication Interface

The MCP6061-E/SN can be used for low-level audio or communication interface tasks where low-voltage operation, low quiescent current, and rail-to-rail signal handling are more important than wideband performance. It can serve as a microphone or line-stage buffer in small portable equipment, provided the application bandwidth remains within the 730 kHz typical gain-bandwidth product and the output loading is acceptable. The low offset and bias-current characteristics help preserve low-level signals. For audio paths, check distortion, noise, output swing, and capacitive-load behavior in the manufacturer graphs. The device is a general-purpose precision amplifier rather than a dedicated high-linearity audio component.

Resumo dos produtos recomendados

MCP6061-E/SN Microchip Technology Usado em: Battery-Powered Sensor Interface, Portable Medical Monitoring, Industrial Process Instrumentation, Low-Noise Voltage Buffer, Current-Shunt Measurement, Audio and Communication Interface MCP6061T-E/SN Same-family 8-SOIC ordering option Usado em: Battery-Powered Sensor Interface, Portable Medical Monitoring, Current-Shunt Measurement MCP6071T-E/SN Same-package Microchip alternative Usado em: Industrial Process Instrumentation, Audio and Communication Interface MCP6V03T-E/SN Same-package low-noise-family alternative Usado em: Low-Noise Voltage Buffer
What is the operating voltage range of MCP6061-E/SN?
The MCP6061-E/SN operates from 1.8 V to 6.0 V on a single supply. According to the manufacturer datasheet for the MCP6061/2/4 family, the low-voltage range supports portable and battery-powered applications. The amplifier also provides rail-to-rail input and output operation, which helps maximize usable signal range in low-voltage designs. Designers should still verify output swing and input common-mode limits under the actual load and supply conditions.
What are the key specifications of MCP6061-E/SN?
The MCP6061-E/SN is a single, unity-gain-stable CMOS operational amplifier with a 730 kHz typical gain-bandwidth product, ±150 µV maximum input offset voltage, and 60 µA typical quiescent current. The manufacturer identifies the device as a precision amplifier with rail-to-rail input and output operation. It is packaged in an 8-SOIC and operates from 1.8 V to 6.0 V. These characteristics make it appropriate for low-power signal conditioning and buffering.
Where can I download the MCP6061-E/SN datasheet PDF?
The MCP6061-E/SN datasheet PDF is available through the MCP6061 product documentation and the linked manufacturer family datasheet. The family document covers the MCP6061 single, MCP6062 dual, and MCP6064 quad amplifier configurations, including their CMOS construction, electrical characteristics, pin descriptions, and application information. Use the MCP6061-specific ordering information when confirming that the 8-SOIC, extended-temperature variant matches the intended design.
Where can I find the MCP6061-E/SN pinout?
The MCP6061-E/SN pinout is defined in the manufacturer datasheet for the MCP6061/2/4 family. The device uses an 8-SOIC package with supply, ground, input, output, and feedback connections described by the MCP6061 pinout table. Use the package drawing and pin-description table together when assigning PCB nets. The package drawing is especially important for distinguishing the single amplifier configuration from the dual and quad family members.
Is MCP6061-E/SN suitable for sensor signal conditioning?
The MCP6061-E/SN is well suited to low-voltage sensor signal conditioning because it combines rail-to-rail input and output operation with a maximum input offset voltage of ±150 µV and 730 kHz typical gain-bandwidth product. It can amplify or buffer signals from resistive dividers, temperature sensors, and low-current transducers. Input bias current and source impedance should be checked against the sensor specification, while the 60 µA typical quiescent current helps preserve battery life.
What is the output noise and bias performance of MCP6061-E/SN?
The MCP6061-E/SN is specified with low input offset voltage of ±150 µV maximum and input bias current from -1 pA to 5,000 pA. The manufacturer identifies the MCP6061 family as a precision CMOS amplifier family designed for low offset and low bias-current operation. These characteristics help reduce errors in high-impedance sensor interfaces and precision buffers. Exact noise, offset, and bias limits should be selected from the appropriate temperature and supply-voltage conditions in the manufacturer datasheet.
How much bandwidth does MCP6061-E/SN provide?
The MCP6061-E/SN has a typical gain-bandwidth product of 730 kHz, according to the Microchip MCP6061 product page and family datasheet. Because the amplifier is unity-gain stable, it can be configured as a follower or used with feedback networks for closed-loop gain. Actual signal bandwidth depends on the selected gain, closed-loop response, output loading, and noise-gain characteristics, so use the datasheet graphs for precision timing or signal-integrity analysis.
What is the difference between MCP6061-E/SN and MCP6061T-E/SN?
The MCP6061-E/SN and MCP6061T-E/SN belong to the same MCP6061 amplifier family and use the same 8-SOIC electrical configuration. The relevant comparison is the ordering and packaging suffix: the T-E designation identifies the manufacturer’s tape-and-reel ordering option, while MCP6061-E/SN is the specific 8-SOIC ordering code under evaluation. Engineers should confirm reel format, temperature grade, and manufacturer ordering information before treating one ordering code as interchangeable with the other.
Can MCP6071T-E/SN replace MCP6061-E/SN?
MCP6071T-E/SN can be considered only after confirming the electrical requirements of the specific design. The cross-reference data identifies it as a comparable Microchip single operational amplifier with the same 8-SOIC package family, but the available manufacturer information does not establish that every MCP6061-E/SN parameter is identical. Check input offset voltage, bias current, bandwidth, output drive, supply range, noise, and stability requirements before approving the substitution. PCB footprint compatibility alone does not guarantee equivalent performance.
What is the best drop-in replacement for MCP6061-E/SN?
The closest documented same-package replacement candidates for MCP6061-E/SN are MCP6061T-E/SN, MCP6071T-E/SN, and MCP6V03T-E/SN. All use an 8-SOIC package and are identified in cross-reference results as comparable Microchip operational amplifiers. A true drop-in decision still requires comparison of supply range, offset voltage, bias current, bandwidth, output swing, output current, noise, and stability. The documented cross-reference information does not establish enough identical specifications to claim that all candidates are exact replacements.
MCP6061-E/SN vs MCP6061T-E/SN - which is better for a new design?
Choose MCP6061-E/SN when the design specifically requires that ordering code; choose MCP6061T-E/SN when its manufacturer ordering and packaging format are appropriate for production handling. The two parts are from the same MCP6061 family and share the same 8-SOIC architecture, so the decision is normally driven by approved BOM configuration, availability, temperature marking, and reel-handling requirements rather than basic amplifier function. Verify the exact orderable part number with the manufacturer’s datasheet before release.
When should I choose MCP6061-E/SN over MCP6071T-E/SN?
Choose MCP6061-E/SN when the design is already configured around the MCP6061 family’s specified performance, including its ±150 µV maximum offset voltage and 730 kHz typical gain-bandwidth product. MCP6071T-E/SN is a sensible candidate to evaluate when its electrical characteristics meet the application and the purchasing configuration is acceptable. Review the complete MCP6061 and MCP6071 datasheets for input bias current, output drive, noise, slew behavior, and stability before final selection.
Is MCP6061-E/SN in stock?
Current stock and allocation status should be confirmed through the Request a Quote form on this page. The manufacturer product page identifies MCP6061 as an active family, while distributor availability can change by region, quantity, and order code. For production planning, request the exact MPN, desired quantity, date code requirements, and delivery schedule. XAIPART will confirm the current quotation and fulfillment information without relying on a stale listing quantity.
What is the price of MCP6061-E/SN?
The current price for MCP6061-E/SN should be obtained through the Request a Quote form on this page. The structured price field is populated from current listing data and may change with quantity, market conditions, and availability. For a production purchase, include the required order quantity, reel or tube packaging preference, date-code constraints, and target delivery date. This request is the appropriate way to confirm the exact MCP6061-E/SN quotation.
What is the lead time for MCP6061-E/SN?
The current lead time for MCP6061-E/SN depends on order quantity, package configuration, date-code requirements, and supplier inventory. Use the Request a Quote form on this page and provide the required quantity and delivery schedule for confirmation. For scheduled production, include a forecast and any required traceability information so the fulfillment plan can be matched to the actual assembly schedule.
What compliance documents are available for MCP6061-E/SN?
The MCP6061-E/SN compliance status should be confirmed from the current Microchip product documentation and the applicable manufacturer declarations. The available product information identifies the MCP6061 family and its precision CMOS amplifier construction, but it does not provide a complete RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals declaration in the manufacturer extract used here. Request the latest compliance paperwork through the Request a Quote form before treating any material-status requirement as satisfied.
What thermal and layout considerations apply to MCP6061-E/SN?
The MCP6061-E/SN is an 8-SOIC analog amplifier whose layout should prioritize short feedback paths, low-noise supply routing, and stable grounding. Place the bypass capacitor close to the supply and ground pins, and keep sensitive input and feedback traces away from high-current switching nodes. The available information does not specify a detailed thermal resistance value, so use the package and board assumptions from the manufacturer documentation when assessing temperature rise. Keep the output load within the datasheet limits.

Dados de referência de engenharia para MCP6061-E/SN — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose MCP6061-E/SN when a design needs a single, low-power precision amplifier operating from 1.8 V to 6.0 V, with rail-to-rail input and output behavior, ±150 µV maximum offset voltage, and 730 kHz typical bandwidth. MCP6061T-E/SN is the closest same-family choice when the approved ordering configuration uses the T-E tape-and-reel designation. Evaluate MCP6071T-E/SN when its electrical characteristics provide a better fit for the required bandwidth, offset, bias current, or output-drive conditions, and evaluate MCP6V03T-E/SN when its low-noise characteristics better match the signal chain. All three documented candidates use the 8-SOIC package, which simplifies footprint planning. However, package compatibility alone does not prove functional equivalence: approve a substitution only after checking offset, bias current, noise, bandwidth, slew rate, output swing, load capability, quiescent current, and stability with the actual circuit.

Comparação com alternativas

Parâmetro Este produto MCP6061T-E/SN MCP6071T-E/SN MCP6V03T-E/SN
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Supply Voltage Range 1.8 V to 6.0 V 1.8 V to 6.0 V family specification 1.8 V to 6.0 V family specification 1.8 V to 6.0 V family specification
Number of Amplifiers 1 1 1 1
Product Family MCP6061 precision amplifier MCP6061 precision amplifier MCP6071 amplifier MCP6V03 amplifier

Principais diferenciais

  • Low-voltage precision operation (vs MCP6071T-E/SN)
  • Established same-family ordering option (vs MCP6061T-E/SN)
  • Rail-to-rail single-supply flexibility (vs MCP6V03T-E/SN)

Notas de projeto

Route the amplifier supply pins directly to a local bypass capacitor and connect the capacitor ground return to the quiet ground reference used by the analog section. Keep the input and feedback traces short, and avoid routing them beneath digital clocks, switching inductors, or high-current return paths. For shunt measurement, use separate sense connections to the shunt so that copper-drop voltage does not add directly to the measured signal.

Check the source impedance against the input bias-current range of -1 pA to 5,000 pA before using the MCP6061-E/SN with high-impedance sensors. The resulting bias-current error can be calculated as VERROR = IB × RSOURCE; at 5,000 pA and 1 MΩ, the error is approximately 5 µV. Use a lower source impedance or a suitable input-bias-current specification when the sensor can produce an error comparable to the target measurement accuracy.

Do not assume that rail-to-rail input and output wording means unlimited output swing. Verify the load current, output voltage, and output impedance conditions in the manufacturer electrical-characteristics table. Also confirm the selected feedback network remains stable with the intended capacitive load. The device is unity-gain stable, but the actual closed-loop response still depends on gain, source impedance, load, and component tolerances.

The 60 µA typical quiescent current is suitable for low-power systems, but total supply consumption also depends on output current and the external resistor network. Keep the feedback-divider current from dominating the amplifier’s own supply demand, especially in battery-powered designs. Start with a supply voltage that provides adequate headroom for the selected output level, and include startup behavior when sequencing multiple analog rails.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The available Microchip product information identifies the MCP6061 family and its electrical features but does not include complete material-compliance declarations. Obtain current RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation through the Request a Quote process before release.

Dados verificados em: 2026-11-20 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MCP6061-E/SN MCP6061-E/SN datasheet MCP6061-E/SN pinout MCP6061-E/SN datasheet pdf MCP6061-E/SN equivalent MCP6061-E/SN replacement MCP6061-E/SN price MCP6061-E/SN stock Microchip MCP6061-E/SN MCP6061 8-SOIC pinout MCP6061 1.8V rail-to-rail op amp MCP6061 sensor signal conditioning MCP6061-E/SN vs MCP6071T-E/SN MCP6061-E/SN vs MCP6V03T-E/SN

Componentes & termos relacionados

Microchip Technology MCP6061-E/SN MCP6061 MCP6061T-E/SN MCP6071T-E/SN MCP6V03T-E/SN operational amplifier precision amplifier CMOS rail-to-rail input rail-to-rail output unity-gain stable gain-bandwidth product input offset voltage input bias current quiescent current 8-SOIC SOIC package surface mount low-voltage operation sensor signal conditioning voltage buffer current-shunt measurement battery-powered electronics
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ