MCP6061-E/SN - 1.8V 730kHz Rail-to-Rail Op Amp | Microchip Technology
MPN: MCP6061-E/SN ✓ NakahandaMCP6061-E/SN Ulas
An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages. The MCP6061 belongs to the CMOS operational-amplifier family within the broader voltage-amplifier and signal-chain hierarchy. Rail-to-rail inputs allow the input common-mode range to approach the supply rails, while rail-to-rail outputs improve output swing and system flexibility in low-voltage designs.
The MCP6061-E/SN provides a maximum input offset voltage of ±150 µV, a typical gain-bandwidth product of 730 kHz, and a typical quiescent current of 60 µA per amplifier. Its single-supply operating range of 1.8 V to 6.0 V supports low-energy sensor interfaces, portable measurement systems, and general-purpose analog signal conditioning. The unity-gain-stable architecture allows the device to be used directly as a voltage follower.
Microchip describes the MCP6061/2/4 family as a precision amplifier family implemented using an advanced CMOS process. The low-power architecture is useful when battery life is important, while the rail-to-rail characteristics reduce the need for negative supplies in single-supply systems. The 730 kHz bandwidth provides useful bandwidth for sensor signals and general-purpose closed-loop applications, although it is not intended for high-frequency video or RF signal paths.
Typical uses include sensor signal conditioning, battery-powered instrumentation, transducer interfaces, current measurement, voltage buffering, and embedded analog systems. The 8-SOIC package also makes the device convenient for through-hole assembly and prototype boards. Designers should verify the required output swing, input bias current, settling behavior, and stability configuration against the application’s signal level and impedance.
When using the MCP6061-E/SN, place input and feedback components close to the amplifier pins and maintain the recommended bypass capacitance near the supply pins. Check input common-mode voltage, output-current limits, and maximum supply voltage during startup and fault conditions. The low quiescent current supports portable designs, but the output drive and bandwidth should be matched to the load.
This product page combines the manufacturer’s amplifier specifications with practical selection criteria, package information, sourcing guidance, and same-footprint replacement options for engineers evaluating the MCP6061-E/SN.
Mga alternatibo na pwedeng ilagay na MCP6061-E/SN — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
MCP6061T-E/SN
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MCP6071T-E/SN
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MCP6V03T-E/SN
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MCP6061-E/SN Mga Pinakamataas na Rating at Electrical Characteristics
| Amplifier Type | Single general-purpose operational amplifier |
| Supply Voltage Range | 1.8 V to 6.0 V |
| Input Offset Voltage | ±150 µV maximum |
| Gain-Bandwidth Product | 730 kHz typical |
| Kuru-kuryente ng Kapayapaan | 60 µA typical per amplifier |
| Input Bias Current | -1 pA to 5,000 pA |
| Input Offset Current | -1 pA to 1 pA |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Gain Configuration | Unity-gain stable |
| Number of Channels | 1 channel |
| Hanay ng Temperature na Operasyon | Extended temperature range |
| Packhaging | 8-SOIC, 0.154 inch width, 3.90 mm width |
| Uri ng Pagpapasok | Surface mount |
| Process Technology | Advanced CMOS |
| Product Category | Precision operational amplifier |
Pin Configuration ng MCP6061-E/SN
| Pin 1 | OUT — Output voltage |
| Pin 2 | V- — Negative supply or ground connection |
| Pin 3 | +IN — Non-inverting input |
| Pin 4 | V+ — Positive supply connection |
| Pin 5 | -IN — Inverting input |
| Pin 6 | OUT — Output voltage |
| Pin 7 | V- — Negative supply or ground connection |
| Pin 8 | V+ — Positive supply connection |
Tipikal na mga Gamit
MCP6061-E/SN ay nararapat para sa 6 aplikasyons: Battery-Powered Sensor Interface, Portable Medical Monitoring, Industrial Process Instrumentation, Low-Noise Voltage Buffer, Current-Shunt Measurement, Audio and Communication Interface.
Battery-Powered Sensor Interface
The MCP6061-E/SN is suitable for conditioning signals from resistive and low-power sensors in a compact, low-voltage system. Its 1.8 V to 6.0 V supply range and 60 µA typical quiescent current help reduce energy consumption, while rail-to-rail input operation helps preserve signal range near the supply limits. A typical arrangement places the sensor at the non-inverting input and uses feedback resistors for gain. Because input bias current can reach 5,000 pA, the source impedance and sensor leakage should be checked. The 730 kHz typical gain-bandwidth product is suitable for many slow-to-moderate-bandwidth measurements, but the amplifier is not intended for demanding high-speed sensor front ends.
Inirekomenda
Portable Medical Monitoring
The MCP6061-E/SN can support low-level analog signal paths in portable monitoring equipment where supply voltage, power consumption, and input accuracy are important. Its ±150 µV maximum input offset voltage and low-bias-current CMOS architecture help reduce errors when buffering sensor outputs, while the 60 µA typical quiescent current is suitable for battery-operated instruments. The amplifier operates from 1.8 V, allowing direct interface to low-voltage sensor front ends when signal levels and safety requirements permit. Designers should confirm medical qualification requirements, patient-protection measures, noise performance, and the applicable output-swing limits before incorporating the device into a clinical system.
Inirekomenda
Industrial Process Instrumentation
The MCP6061-E/SN is appropriate for general-purpose industrial signal conditioning when the design uses a single low-voltage supply and does not require high-speed performance. It can buffer transducer outputs, amplify bridge or resistive-divider signals, and provide gain in feedback networks with a 730 kHz typical gain-bandwidth product. The low offset voltage helps preserve small-signal accuracy, and rail-to-rail input operation simplifies systems whose signals span much of the available supply range. Industrial designs should still account for electrical surge, temperature drift, grounding, common-mode rejection, and output-current limits. The device is suited to measurement and control channels rather than high-bandwidth communication links.
Inirekomenda
Low-Noise Voltage Buffer
The MCP6061-E/SN can be used as a unity-gain voltage buffer because the device is unity-gain stable and provides rail-to-rail output operation. In this configuration, the buffer isolates a high-impedance source from a downstream load while preserving the signal level within the available output-swing range. The 730 kHz typical gain-bandwidth product gives useful closed-loop response for many control, reference, and low-speed communication interfaces. Load capacitance, output stability, and source impedance should be evaluated carefully. The amplifier’s low quiescent current is valuable in portable equipment, while its offset and bias-current specifications should be compared with the source impedance for high-accuracy buffering.
Inirekomenda
Current-Shunt Measurement
The MCP6061-E/SN is suitable for amplifying the small voltage generated by a current-sense shunt in low-voltage power systems. The ±150 µV maximum input offset voltage helps resolve small shunt drops, while rail-to-rail input operation permits operation close to the supply rails when the signal and output requirements allow. The 60 µA typical quiescent current is attractive for battery-powered monitoring. Place the shunt and amplifier input nodes so that Kelvin connections minimize trace resistance and thermal errors. Confirm the maximum shunt voltage, amplifier input common-mode range, output swing, and power-supply variation before choosing the gain and feedback resistors.
Inirekomenda
Audio and Communication Interface
The MCP6061-E/SN can be used for low-level audio or communication interface tasks where low-voltage operation, low quiescent current, and rail-to-rail signal handling are more important than wideband performance. It can serve as a microphone or line-stage buffer in small portable equipment, provided the application bandwidth remains within the 730 kHz typical gain-bandwidth product and the output loading is acceptable. The low offset and bias-current characteristics help preserve low-level signals. For audio paths, check distortion, noise, output swing, and capacitive-load behavior in the manufacturer graphs. The device is a general-purpose precision amplifier rather than a dedicated high-linearity audio component.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MCP6061-E/SN — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MCP6061T-E/SN | MCP6071T-E/SN | MCP6V03T-E/SN |
|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Supply Voltage Range | 1.8 V to 6.0 V | 1.8 V to 6.0 V family specification | 1.8 V to 6.0 V family specification | 1.8 V to 6.0 V family specification |
| Number of Amplifiers | 1 | 1 | 1 | 1 |
| Product Family | MCP6061 precision amplifier | MCP6061 precision amplifier | MCP6071 amplifier | MCP6V03 amplifier |
Pangunahing mga Pagkakaiba
- Low-voltage precision operation (kumpara saMCP6071T-E/SN)
- Established same-family ordering option (kumpara saMCP6061T-E/SN)
- Rail-to-rail single-supply flexibility (kumpara saMCP6V03T-E/SN)
Talaan ng Disenyo
Route the amplifier supply pins directly to a local bypass capacitor and connect the capacitor ground return to the quiet ground reference used by the analog section. Keep the input and feedback traces short, and avoid routing them beneath digital clocks, switching inductors, or high-current return paths. For shunt measurement, use separate sense connections to the shunt so that copper-drop voltage does not add directly to the measured signal.
Check the source impedance against the input bias-current range of -1 pA to 5,000 pA before using the MCP6061-E/SN with high-impedance sensors. The resulting bias-current error can be calculated as VERROR = IB × RSOURCE; at 5,000 pA and 1 MΩ, the error is approximately 5 µV. Use a lower source impedance or a suitable input-bias-current specification when the sensor can produce an error comparable to the target measurement accuracy.
Do not assume that rail-to-rail input and output wording means unlimited output swing. Verify the load current, output voltage, and output impedance conditions in the manufacturer electrical-characteristics table. Also confirm the selected feedback network remains stable with the intended capacitive load. The device is unity-gain stable, but the actual closed-loop response still depends on gain, source impedance, load, and component tolerances.
The 60 µA typical quiescent current is suitable for low-power systems, but total supply consumption also depends on output current and the external resistor network. Keep the feedback-divider current from dominating the amplifier’s own supply demand, especially in battery-powered designs. Start with a supply voltage that provides adequate headroom for the selected output level, and include startup behavior when sequencing multiple analog rails.
Impormasyon ng Pagsunod sa Kautusan
The available Microchip product information identifies the MCP6061 family and its electrical features but does not include complete material-compliance declarations. Obtain current RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation through the Request a Quote process before release.