MK10DN512ZVMB10 - Kinetis K10 Cortex-M4 MCU 100MHz 512KB | NXP
N.º da peça: MK10DN512ZVMB10 ✓ AtivoMK10DN512ZVMB10 Visão geral
A microcontroller unit (MCU) is an integrated circuit that combines a processor core, nonvolatile program memory, SRAM, and a rich set of peripherals on a single die, sitting at the embedded-node level of the semiconductor hierarchy (microcontroller -> embedded processor -> semiconductor IC). MCUs such as the MK10DN512ZVMB10 execute real-time control firmware in products ranging from industrial automation equipment to consumer devices.
Key features of the MK10DN512ZVMB10 include the ARM Cortex-M4 core with DSP instructions and single-cycle MAC, a 100 MHz maximum clock frequency, 512 KB flash program storage with a 1.71-3.6 V single-supply operating range, and the compact 81-terminal MAPBGA ball-grid package with 0.8 mm ball pitch. The device carries industrial temperature grade characteristics and is lead-free and RoHS compliant according to distributor data.
Architecturally, the Kinetis K10 family combines the Cortex-M4 pipeline with NXP (formerly Freescale) mixed-signal peripherals, providing high computation throughput for digital control loops and signal processing within a low-power, single-supply design. Related package options in the same K10DN512 flash configuration include the LQFP-80 variant MK10DN512VLQ10, which NXP lists with 128 KB RAM and USB OTG support.
Typical applications include industrial control systems, motor control, consumer electronics, and embedded instrumentation where a compact ball-grid MCU with substantial flash is required. The MAPBGA-81 footprint suits dense multi-layer PCBs where I/O count must exceed what QFP packages offer in the same area.
Designers should plan the PCB land pattern and ball-map fanout early, since reworking BGA packages requires X-ray inspection capability, and supply for this part is limited to a small number of distributors including Rochester Electronics, a NXP-authorized aftermarket source.
This page adds value beyond the manufacturer datasheet by consolidating distributor pricing, lifecycle status, compliance data, and drop-in alternative analysis in one place.
Alternativas drop-in para MK10DN512ZVMB10 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
MK20DN512ZVMB10
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MK21DN512ZVMB10
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MK10DN512ZVMB10 Classificações máximas e características elétricas
| Core Processor | ARM Cortex-M4 |
| Core Size | 32-bit |
| Frequência máxima de clock | 100 MHz |
| Flash Memory | 512 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Tensão de alimentação de operação | 1.8 V / 2.5 V / 3.3 V |
| Package Type | MAPBGA-81 (8x8 mm), 81-ball FBGA |
| Tipo de montagem | Surface Mount |
| Terminal Form | Ball |
| Package Shape | Square |
| Product Family | Kinetis K Family, K1x Series, K10 Sub-Family |
| Temperature Grade | Industrial |
| Lifecycle Stage | Active |
| Status RoHS | Lead free / RoHS Compliant |
Guia de Configuração de Pinos do MK10DN512ZVMB10 square
Configuração de pinos para MK10DN512ZVMB10 (pacote square). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para MK10DN512ZVMB10.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MK10DN512ZVMB10 é adequado para 6 aplicaçãos: Industrial Control Systems, Motor Control and Drives, Consumer Electronics, Embedded Instrumentation and Data Acquisition, Networking and Communication Nodes, Obsolescence Recovery and Legacy Sustainment.
Industrial Control Systems
The MK10DN512ZVMB10 fits industrial control nodes because its 100 MHz ARM Cortex-M4 core with DSP instructions executes real-time control loops, protocol stacks, and HMI logic concurrently within a single chip, while 512 KB flash accommodates feature-rich firmware and field-updatable application code. Its 1.71 V to 3.6 V single-supply design simplifies integration with 3.3 V industrial logic levels, and the industrial temperature grade suits factory-floor environments. In a typical topology the MCU drives PWM outputs through gate drivers, samples sensors via ADC channels, and communicates over UART/SPI/I2C to PLC backplanes. The MAPBGA-81 package provides enough I/O balls for dense multi-layer boards, though BGA assembly requires reflow and X-ray inspection capability.
Recomendado
Motor Control and Drives
Motor control is a primary strength of the Kinetis K10 family: the Cortex-M4 single-cycle MAC and DSP instructions allow field-oriented control (FOC) current loops to close at 10-20 kHz PWM rates within the 100 MHz timing budget. The 512 KB flash leaves room for multiple motor profiles, parameter tables, and communication stacks (CANopen, Modbus) in one image. With a 1.71-3.6 V supply, the MCU interfaces cleanly with 3.3 V gate-driver and current-sense circuitry. In practice the MCU generates complementary PWM pairs, reads shunt or Hall feedback through its ADCs, and implements protection (overcurrent, stall) in software. Designers should confirm FTM module channel counts for the 81-ball package variant in the K10 reference manual before committing the layout.
Recomendado
Consumer Electronics
For consumer products the MK10DN512ZVMB10 offers an attractive balance of processing power and integration: the 100 MHz Cortex-M4 handles application logic, capacitive-touch sensing, and display driving, while 512 KB flash supports OTA-style firmware architectures on a single-chip BOM. The compact 8x8 mm 81-ball MAPBGA conserves PCB area in space-limited products such as appliance controls, fitness devices, and small appliances. The 1.71-3.6 V supply range supports direct battery or 3.3 V rail operation, aiding low standby-power designs. Cost-conscious consumer teams should note the relatively high unit price (about USD 47.97 at quantity 1 as of 2025 distributor data) and evaluate the pin-compatible K20/K21 family variants, which may be cheaper at volume while retaining the same footprint.
Recomendado
Embedded Instrumentation and Data Acquisition
Bench and portable instruments benefit from the MK10DN512ZVMB10's DSP-enhanced Cortex-M4 core, which executes FFT and filtering algorithms on sampled data at 100 MHz, and its 512 KB flash, which stores calibration constants, UI assets, and logging firmware. The 1.71-3.6 V supply allows direct connection to low-noise 3.3 V analog front ends, and the 81-ball package exposes the ADC, SPI, and UART peripherals needed to link precision converters and communication ports. A typical design places the MCU behind a 24-bit delta-sigma ADC, with results streamed over USB or UART. Engineers needing USB OTG built-in should compare the related MK10DN512VLQ10 variant, which NXP lists with 128 KB RAM and USB OTG in an LQFP-80 package.
Recomendado
Networking and Communication Nodes
The MK10DN512ZVMB10 serves as a protocol-conversion and control node in communication equipment: the 100 MHz core runs multiple serial stacks simultaneously (CAN, RS-485, SPI, I2C), and 512 KB flash holds buffering tables and firmware for gateway logic. Its 1.71-3.6 V supply matches standard 3.3 V transceiver ICs directly, minimizing level-shift circuitry. The industrial temperature grade supports telecom and outdoor-adjacent enclosures. In a typical node, the MCU bridges a field bus to a supervisory link, executes CRC/timeout handling in hardware-assisted loops, and manages power-mode transitions for energy budgeting. For designs needing an integrated Ethernet MAC, NXP's higher Kinetis K6x devices (for example MK60DN256VMD10) extend the family upward in the same Kinetis software ecosystem.
Recomendado
Obsolescence Recovery and Legacy Sustainment
A significant real-world use of the MK10DN512ZVMB10 today is sustaining designs originally built on Kinetis K10 silicon whose authorized stock has tightened. Distributor data shows only limited availability (about 1600 pieces at one source, roughly USD 47.97 each as of 2025), making Rochester Electronics - an NXP-authorized aftermarket distributor - the practical continuation path. Procurement teams should benchmark quantities against projected production lifetimes, secure last-time-buy volumes, and evaluate same-footprint K20/K21 ZVMB family members as firmware-forward migration targets. Because the BGA package is not field-replaceable, any die-level substitution must be validated with X-ray inspection and full functional test, and ball-map and peripheral differences verified against the respective NXP datasheets before approval.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MK10DN512ZVMB10 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MK20DN512ZVMB10 | MK21DN512ZVMB10 | MK10DN512VLQ10 |
|---|---|---|---|---|
| Package | MAPBGA-81 (8x8 mm) | MAPBGA-81 (8x8 mm) - same footprint | MAPBGA-81 (8x8 mm) - same footprint | LQFP-80 - different package |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ARM Cortex-M4, 32-bit | ARM Cortex-M4, 32-bit | ARM Cortex-M4, 32-bit | ARM Cortex-M4, 32-bit |
| Max Clock Frequency | 100 MHz | 100 MHz | 100 MHz | 100 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB |
| Supply Voltage | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V |
| Distinctive Feature | Baseline K10 sub-family peripherals | K20 adds touch-sense/USB-capable peripherals | K21 adds USB FS controller | 128 KB RAM, USB OTG (per NXP page) |
| Drop-in Compatible | Reference part | Yes (same ball map, verify peripherals) | Yes (same ball map, verify peripherals) | No (package mismatch) |
Principais diferenciais
- Baseline K10 sub-family simplicity (vs MK21DN512ZVMB10)
- 512 KB flash on a compact 8x8 mm BGA (vs MK10DN512VLQ10)
- Cortex-M4 DSP capability at 100 MHz (vs MK20DN512ZVMB10)
Notas de projeto
The MAPBGA-81 (8x8 mm, 0.8 mm-pitch class) land pattern must follow the exact ball-map in the NXP K10 datasheet; do not rely on generic BGA footprints. Plan fanout escape routing on at least four layers, with dedicated via fanout under the array. Because BGA joints cannot be visually inspected, budget for X-ray or acoustic inspection at incoming and post-reflow stages, and specify a no-clean, low-voiding solder paste profile. Verify stencil aperture design against IPC-class requirements for your product.
Supply the MK10DN512ZVMB10 from a clean 3.3 V (or 2.5 V/1.8 V) rail within the 1.71-3.6 V range. Decouple each VDD/VDDA ball pair with 100 nF ceramics placed as close to the ball vias as possible, plus bulk 10 uF per rail. Flash programming has specific voltage requirements documented in the K10 datasheet - confirm that the rail is within the flash-write voltage window during in-system programming. Estimated: with typical K10 active current in the tens-of-mA class at 100 MHz, a 3.3 V regulator rated 150-250 mA provides adequate margin.
Availability is the biggest practical risk: Octopart shows pricing from only one distributor and stock levels are limited (about 1600 pieces reported as of 2025). Before designing in, secure a last-time-buy quantity or pre-qualify a same-footprint K20/K21 ZVMB variant as a firmware-forward fallback. Also verify ball-map and peripheral differences against the specific sub-family datasheet - sub-family substitutions within the same package are not guaranteed pin-function-identical for multiplexed pins.
Keep high-speed clock traces short and reference a solid ground plane; the BGA ball vias create stub inductance that can degrade edge rates on fast GPIO. For analog rails, filter VDDA with an RC or ferrite from the digital rail to preserve ADC accuracy. Estimated: a series 10-ohm resistor plus 1 uF on VDDA typically attenuates digital-rail noise sufficiently for 12-bit-class sampling; validate on your layout.
Informações de conformidade
Lead free / RoHS compliant per IC Components Limited and JLCPCB distributor data. REACH, halogen-free and conflict-minerals status not stated in provided data - confirm with NXP.
