NXP Semiconductors

MKE06Z64VLD4 - 48MHz 64KB Flash Cortex-M0+ MCU | NXP

N.º da peça: MKE06Z64VLD4 ✓ Ativo
2.7 V to 5.5 V Vdss 44-LQFP, 10 x 10 mm Package 48 MHz Speed 64 KB Memory
MOQ: 1 |

MKE06Z64VLD4 Visão geral

The NXP Semiconductors MKE06Z64VLD4 is a 32-bit ARM Cortex-M0+ Kinetis KE06 microcontroller operating up to 48 MHz, with 64 KB of Flash memory, 8 KB of SRAM, and a 44-LQFP 10 x 10 mm package. It operates from 2.7 V to 5.5 V and is designed for cost-sensitive embedded systems requiring a compact 5 V microcontroller with enhanced electrical-noise resilience.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The MKE06Z64VLD4 belongs to the Kinetis E series, where the Cortex-M0+ core provides a compact, energy-efficient architecture for control-oriented tasks. This device hierarchy connects the ARM Cortex-M0+ processor, 32-bit microcontroller, embedded controller, and semiconductor categories within a single integrated component.

Key features include a 48 MHz Cortex-M0+ core, 64 KB of Flash program memory, 8 KB of SRAM, and integrated 6-bit and 12-bit ADC channels. Its 5 V robust design emphasizes enhanced ESD and EMC performance for high-reliability products used in electrically noisy environments. An integrated low-voltage detector and power-on reset module supports reliable startup and supply monitoring.

The 44-LQFP package provides a conventional leaded surface-mount footprint that is inspectable after assembly and appropriate for prototypes, industrial controllers, and cost-sensitive production boards. The device combines a 2.7 V to 5.5 V operating range with 64 KB of embedded Flash, avoiding an external memory interface for many control applications while retaining sufficient SRAM for protocol handling, acquisition, and supervisory logic.

Typical applications include industrial control panels, appliance controllers, building equipment, automotive accessories, sensor nodes, and compact embedded systems. The ADC resources support analog measurement, while the Cortex-M0+ instruction set and integrated memories are suited to real-time monitoring, state-machine control, communications, and actuator supervision where deterministic peripheral behavior and low system complexity matter.

PCB design should preserve clean supply distribution because high-current return paths can disturb sensitive ADC measurements. Place the decoupling capacitor close to the supply pins, route analog inputs away from switching nodes, and connect all ground pins according to the manufacturer pin and layout guidance. Firmware should also exercise reset and low-voltage conditions because the integrated LVD/POR circuitry does not replace application-level validation of brownout behavior.

This product page combines NXP device information with package, memory, application, sourcing, and replacement guidance for engineers evaluating the MKE06Z64VLD4. It also highlights the limits of direct substitution: a same-package candidate must match the critical clock, memory, voltage, peripheral, and pin-level requirements rather than relying on package similarity alone.

Alternativas drop-in para MKE06Z64VLD4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MKE06Z64VLD4 (mesmo formato e footprint) — diferindo em Operating Voltage.

NXP Semiconductors
Operating Voltage: 5 V
Comparar com MKE06Z64VLD4 →

MKE06Z64VLH4

✅ Drop-In
📦 44-LQFP
Retains the 48 MHz KE06 architecture, 64 KB Flash, 8 KB SRAM, and 44-LQFP footprint; the ordering-temperature suffix differs, with a quantified temperature delta requiring manufacturer confirmation

📋 Alternativa de referência (fora do catálogo)

MKE06Z64VLD4 Classificações máximas e características elétricas

Product Type 32-bit ARM Cortex-M0+ microcontroller
Product Series Kinetis KE06
Frequência máxima de clock 48 MHz
CPU Core ARM Cortex-M0+
Flash Memory 64 KB
SRAM 8 KB
Operating Voltage 2.7 V to 5.5 V
ADC Resolution 6-bit and 12-bit
Encapsulamento 44-LQFP, 10 x 10 mm
Tipo de montagem Surface mount
Supply Type 5 V robust
ESD and EMC Features Enhanced ESD/EMC performance
Voltage Monitoring Integrated LVD/POR module
Packaging Tray
Status RoHS Compliant
Moisture Sensitivity Level MSL 3
REACH Status Unspecified

Guia de Configuração de Pinos do MKE06Z64VLD4 44-lqfp, 10 x 10 mm

Configuração de pinos para MKE06Z64VLD4 (pacote 44-lqfp, 10 x 10 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 44-lqfp, 10 x 10 mm para MKE06Z64VLD4

Nenhum dado detalhado de pinagem disponível para MKE06Z64VLD4.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MKE06Z64VLD4 é adequado para 6 aplicaçãos: Industrial Control Module, Automotive Accessory Controller, Appliance Controller, Building Equipment Interface, Sensor and Measurement Node, Robust IoT Control Node.

🏭

Industrial Control Module

The MKE06Z64VLD4 fits industrial control modules that combine 2.7 V to 5.5 V operation with a 48 MHz Cortex-M0+ core, 64 KB Flash, and 8 KB SRAM. Its 5 V robust construction and enhanced ESD/EMC characteristics are useful when the controller operates near relays, contactors, motor drivers, or other electrically noisy equipment. The MCU can supervise inputs, sequence actuators, and manage local communications without external program memory. Validate grounding and surge requirements at the board level, and review the exact temperature and qualification grade before using the device in a deployed industrial enclosure.

🚗

Automotive Accessory Controller

The MKE06Z64VLD4 is suitable for compact automotive accessory controllers where a 48 MHz Cortex-M0+ processor, 64 KB Flash, and 8 KB SRAM provide enough capability for switch monitoring, diagnostics, and actuator sequencing. Its integrated LVD/POR module supports dependable initialization, while the 5 V robust design targets high-reliability equipment in electrically noisy environments. The 44-LQFP package also permits visual inspection after board assembly. Automotive production approval depends on confirming the exact qualification, temperature rating, change-notice status, and manufacturer-approved operating conditions.

🔧

Appliance Controller

The MKE06Z64VLD4 can serve as the central controller in an appliance because its 48 MHz processing speed supports real-time state management while 64 KB Flash and 8 KB SRAM accommodate embedded control firmware. The 2.7 V to 5.5 V supply range is convenient for mixed 3.3 V and 5 V system architectures, and the 12-bit ADC channel can measure analog inputs such as temperature or load signals. A designer should place the supply bypass capacitor correctly, isolate ADC routing from motor and heater switching paths, and confirm that all peripheral timing is compatible with the selected clock configuration.

🏠

Building Equipment Interface

The MKE06Z64VLD4 fits building equipment interfaces that monitor switches, sensors, and remote modules while maintaining a compact 44-LQFP footprint. Its 64 KB Flash provides room for protocol and supervisory routines, and the 8 KB SRAM supports buffering or state management without requiring a separate memory device. The integrated LVD/POR circuitry assists startup reliability in systems where the supply can fluctuate. For long cable runs or high-energy loads, apply the manufacturer's ESD/EMC layout practices and use appropriate external protection rather than relying on the MCU alone.

🧩

Sensor and Measurement Node

The MKE06Z64VLD4 is appropriate for compact sensor nodes that acquire analog measurements and perform local filtering, thresholding, or diagnostics. Its ADC supports 6-bit and 12-bit conversion, while the 48 MHz Cortex-M0+ core can service multiple acquisition and communication routines within limited memory. The 2.7 V minimum operating voltage supports low-voltage designs, although the complete node must remain within 2.7 V to 5.5 V. Keep sensitive analog traces short and away from switching nodes, follow the reference layout, and confirm the required sampling rate and source impedance.

🌐

Robust IoT Control Node

The MKE06Z64VLD4 supports compact IoT control nodes that must acquire data, execute local logic, and manage communication under a 5 V robust power environment. Its 64 KB Flash accommodates networking and update-related code, while 8 KB SRAM provides working memory for protocol handling. The enhanced ESD/EMC characteristics are particularly relevant to nodes installed near motors, relays, or poorly controlled external wiring. Designers should isolate field-facing connectors, provide appropriate surge protection, preserve continuous ground paths, and verify firmware behavior across reset and low-voltage conditions.

What are the key specifications of MKE06Z64VLD4 that engineers should know?
The MKE06Z64VLD4 is a 32-bit Kinetis KE06 microcontroller with a 48 MHz ARM Cortex-M0+ core, 64 KB of Flash memory, 8 KB of SRAM, and a 2.7 V to 5.5 V operating range. According to the NXP product page and distributor technical listings, it is packaged in a 44-LQFP 10 x 10 mm package. Its 5 V robust configuration, integrated LVD/POR module, and enhanced ESD/EMC characteristics make it relevant to industrial, automotive accessory, appliance, and sensor-node designs.
Where can I download the MKE06Z64VLD4 datasheet PDF?
The official MKE06Z64VLD4 datasheet is available through the NXP product page at https://www.nxp.com/part/MKE06Z64VLD4. The corresponding KE06 documentation covers the 48 MHz Cortex-M0+ processor, 64 KB Flash, 8 KB SRAM, electrical limits, pin descriptions, and package information. Use the NXP datasheet rather than relying only on distributor summaries when assigning pins or designing the decoupling and analog-measurement circuitry.
Where can I find the MKE06Z64VLD4 pinout?
The MKE06Z64VLD4 pinout is documented in the manufacturer datasheet for the Kinetis KE06 family and its 44-LQFP package. NXP identifies the target as a 44-LQFP device, while distributor listings confirm the 10 x 10 mm package dimensions. Use the manufacturer pin-description table and package drawing when connecting power, ground, reset, programming, clock, and I/O signals because assigning connections from abbreviated catalog summaries can lead to errors.
What is the operating voltage of MKE06Z64VLD4?
The MKE06Z64VLD4 operates from 2.7 V to 5.5 V. According to the NXP product information and the technical listing for this exact ordering code, the device belongs to the 5 V robust Kinetis KE06 family. Design the power rail, decoupling network, and external interface levels around this range, and verify every connected peripheral for compatibility with the selected supply voltage.
How much Flash and SRAM does MKE06Z64VLD4 contain?
The MKE06Z64VLD4 contains 64 KB of Flash memory and 8 KB of SRAM. According to the NXP KE06 family description and the exact-part distributor listing, the memory arrangement is organized as 64K by 8 bits. This combination is suitable for compact control firmware, communication handlers, acquisition routines, and supervisory logic that do not require external program or data memory.
What can replace the MKE06Z64VLD4 on the same PCB?
The closest identified same-package drop-in candidate is MKE06Z64VLH4, which retains the KE06 family architecture and 44-LQFP footprint. A replacement should still be checked for temperature grade, clock rating, memory organization, peripheral configuration, pin multiplexing, and firmware compatibility before production use. Package appearance alone does not establish functional interchangeability, so preserve the manufacturer pin and reference-design information in the qualification record.
Is MKE06Z64VLD4 the same as MKE06Z64VLH4?
The MKE06Z64VLH4 is the closest direct alternative because it uses the same 44-LQFP package and belongs to the same KE06 family. However, the ordering-code suffix can identify a different temperature or qualification grade, so it should not be treated as automatically identical. Confirm the minimum and maximum junction temperature, qualification requirements, exposed-pad implementation, and device revision against the NXP documentation before substitution.
MKE06Z64VLD4 vs MKE06Z64VLH4 — which is better for an industrial controller?
Choose MKE06Z64VLD4 when its specified operating-temperature grade satisfies the product requirement, and choose MKE06Z64VLH4 when the alternative's grade better matches the enclosure temperature. Both devices retain the same 44-LQFP footprint and KE06 family foundation, which simplifies board reuse. The decisive comparison is the manufacturer-defined temperature and qualification grade rather than package size, because memory size and core architecture do not provide enough differentiation to establish interchangeability.
When should I choose MKE06Z64VLD4 over a lower-speed Kinetis E series MCU?
Choose MKE06Z64VLD4 when a design benefits from its 48 MHz Cortex-M0+ performance and 64 KB Flash while still using a 44-LQFP footprint. It is particularly useful for timing-sensitive control, mixed analog and digital supervision, and compact 2.7 V to 5.5 V systems. A lower-speed family member may be adequate for simpler sequencing, but migrating to a different family can require firmware, clock, peripheral, and pin-level review rather than a component-only change.
Is MKE06Z64VLD4 suitable for automotive and industrial applications?
The MKE06Z64VLD4 is suitable for industrial and automotive applications when its specified environmental and qualification requirements meet the end product. NXP describes enhanced ESD/EMC performance for electrically noisy environments and an integrated LVD/POR module for reliable operation. Automotive use still requires confirmation of the exact AEC-Q100 qualification status, temperature grade, production status, and any customer-specific approval before release.
How much power does the MKE06Z64VLD4 need for PCB design?
The MKE06Z64VLD4 requires a supply within 2.7 V to 5.5 V, while its exact current consumption depends on clock configuration, operating mode, peripherals, and ambient conditions. Use the manufacturer electrical-characteristics tables for active, idle, and wakeup current. Place the required supply capacitor beside the device, provide adequate return-path copper, and measure startup and active current on the finished board rather than estimating from processor frequency alone.
What design features improve MKE06Z64VLD4 ADC performance?
The MKE06Z64VLD4 includes 6-bit and 12-bit ADC channels and is intended for a 5 V robust environment. Improve measurement quality by routing analog inputs away from switching power nodes, keeping the analog return path continuous, and placing bypass capacitance according to the manufacturer reference layout. Use the ADC calibration and sampling guidance in the KE06 documentation, and validate the selected source impedance against the required conversion rate.
How do I request a quote for MKE06Z64VLD4?
Use the Request a Quote form on this page to request current commercial terms, stock status, and lead time for MKE06Z64VLD4. Quote requests should include the exact MKE06Z64VLD4 ordering code, required quantity, tray or other packaging preference, and destination. Manufacturing change notices and traceable lot requirements should also be stated when appropriate so the quotation reflects the production needs of the finished assembly.
What is the price of MKE06Z64VLD4?
The current commercial price of MKE06Z64VLD4 is presented through the Request a Quote form on this page rather than as a static figure. For a meaningful quotation, specify quantity, package format, production date, traceability requirements, and shipment location. The exact 44-LQFP ordering code is important because quantity breaks and availability can differ from related Kinetis KE06 variants.
Is MKE06Z64VLD4 in stock and what is its lead time?
Current stock and lead-time status for MKE06Z64VLD4 should be confirmed through the Request a Quote form on this page. Include your required quantity, scheduled production date, packaging preference, and whether lot traceability or manufacturer change-notice review is required. The manufacturer lists the part as active, but a quotation is the appropriate mechanism for confirming date-specific inventory and delivery commitments.

Dados de referência de engenharia para MKE06Z64VLD4 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the MKE06Z64VLD4 when the design requires a 48 MHz Cortex-M0+ core, 64 KB Flash, 8 KB SRAM, and a 2.7 V to 5.5 V operating range in a 44-LQFP package. It is particularly appropriate for compact industrial, appliance, automotive accessory, sensor-node, and building-equipment controllers that benefit from the KE06 family’s 5 V robust construction and enhanced ESD/EMC characteristics. Consider the MKE06Z64VLH4 when its manufacturer-defined ordering grade better satisfies temperature or qualification requirements, while confirming that its pinout, clock, memory, and peripheral behavior are equivalent. Lower-speed Kinetis E series devices may reduce processing requirements in simple designs, but they are not automatic drop-in replacements because their clock ratings and device configurations differ. Complete a firmware, timing, electrical, environmental, and PCB review before approving any substitution.

Comparação com alternativas

Parâmetro Este produto MKE06Z64VLH4
Package 44-LQFP, 10 x 10 mm 44-LQFP
Brand NXP Semiconductors NXP Semiconductors
Product Series Kinetis KE06 Kinetis KE06
CPU Core ARM Cortex-M0+ ARM Cortex-M0+

Principais diferenciais

  • 48 MHz processing performance in the KE06 family (vs MKE06Z64VLH4)
  • Integrated memory for self-contained control designs (vs MKE06Z64VLH4)
  • Robust electrical design for noisy environments (vs MKE06Z64VLH4)

Notas de projeto

Place the required bypass capacitor as close as practical to the MKE06Z64VLD4 supply pins and provide an uninterrupted ground return. Route high-current loads and switching-regulator connections away from the MCU. The 2.7 V to 5.5 V operating range does not eliminate the need for clean local supply distribution, particularly when ADC measurements and reset behavior must remain reliable.

Separate analog inputs from digital and switching traces, keep analog traces short, and connect the analog ground reference according to the manufacturer layout diagram. Because the device includes 6-bit and 12-bit ADC channels, source impedance, acquisition time, and routing can influence measurement accuracy. Test the completed layout across the intended supply range rather than relying only on nominal simulation conditions.

Do not substitute a related KE04, KE02, or alternate ordering code solely because it uses a similar 44-LQFP package. The KE06 target runs at 48 MHz and includes 64 KB Flash, while lower family members have different timing and resource characteristics. Review the manufacturer pin table, clock setup, peripheral mapping, memory organization, temperature grade, and qualification before treating any alternative as a drop-in replacement.

Informações de conformidade

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

RoHS compliance and MSL 3 are reported for the exact MPN. REACH status is not confirmed. Automotive application suitability does not by itself establish AEC-Q100 qualification for this ordering code.

Dados verificados em: 2026-11-19 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MKE06Z64VLD4 datasheet MKE06Z64VLD4 pinout MKE06Z64VLD4 datasheet pdf MKE06Z64VLD4 44-LQFP MKE06Z64VLD4 48MHz MKE06Z64VLD4 64KB Flash MKE06Z64VLD4 replacement MKE06Z64VLD4 equivalent MKE06Z64VLD4 vs MKE06Z64VLH4 NXP MKE06Z64VLD4 MKE06Z64VLD4 price MKE06Z64VLD4 stock

Componentes & termos relacionados

NXP Semiconductors MKE06Z64VLD4 MKE06Z64VLH4 MKE04Z64VLD4 MKE04Z64VLK4 MKE02Z64VLD4 Kinetis KE06 ARM Cortex-M0+ 32-bit microcontroller embedded controller semiconductor 64 KB Flash 8 KB SRAM 48 MHz 2.7 V to 5.5 V 44-LQFP LQFP package family surface mount 12-bit ADC 6-bit ADC LVD/POR ESD protection EMC performance RoHS REACH
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ