NXP Semiconductors

MKL04Z32VLC4 - 32KB Cortex-M0+ MCU, 48MHz, 32-LQFP | NXP

N.º da peça: MKL04Z32VLC4 ✓ Ativo
1.71 V to 3.6 V Vdss 32-LQFP, 7 mm x 7 mm Package 48 MHz Speed 32 KB Memory
MOQ: 1 |

MKL04Z32VLC4 Visão geral

The NXP Semiconductors MKL04Z32VLC4 is an active 32-bit Arm Cortex-M0+ microcontroller with 32 KB of embedded flash memory, a maximum CPU frequency of 48 MHz, and a 32-LQFP surface-mount package. It belongs to the Kinetis KL0 ultra-low-power MCU family, which provides an entry point into the Kinetis L series for compact embedded products. According to the NXP product page, the KL0x family is software- and tool-compatible with other Kinetis L series devices, helping engineers reuse development tools, drivers, and application code.

A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The MKL04Z32VLC4 uses the Arm Cortex-M0+ core, a compact 32-bit architecture designed for cost-sensitive, energy-efficient embedded control. Within the product hierarchy, this device is a microcontroller MCU, embedded processor, and semiconductor. Its 32 KB flash stores firmware, while the Cortex-M0+ core executes control logic without the complexity of a higher-performance application processor.

The key headline specifications are 32 KB of flash, operation up to 48 MHz, and a 32-LQFP package. The manufacturer’s product information identifies MKL04Z32VLC4 as an active part and places it in the Kinetis KL0 MCU family. The KL0 family is aimed at applications requiring compact control, low-power operation, and an Arm Cortex-M0+ software ecosystem. Its compatibility with the wider Kinetis L series makes it suitable for designs that may later require migration to a device with more memory or peripherals.

The MKL04Z32VLC4 is suited to small embedded systems where a 32 KB firmware area is sufficient. Typical system roles include sensor conditioning, actuator control, simple communication, and product auxiliaries. Its 48 MHz operating capability provides additional timing headroom for responsive control loops and peripheral servicing. Designers should verify the complete peripheral set, pin multiplexing, clock configuration, and electrical limits in the manufacturer datasheet and reference manual before finalizing a circuit.

Typical applications include low-power sensor nodes, industrial control modules, building automation endpoints, compact consumer accessories, and battery-powered embedded products. The KL0 family’s low-power positioning is particularly useful when the design spends much of its operating time in sleep states and wakes periodically to acquire data or perform a control action. Firmware partitioning should preserve sufficient flash space for application updates, diagnostics, and production configuration.

PCB implementation requires attention to the 32-LQFP lead pitch and exposed-pad requirements stated in the package drawing. Place decoupling capacitors close to the appropriate supply pins, route sensitive clock and reset signals away from fast-switching nodes, and follow the recommended land pattern in the manufacturer package documentation. Confirm the pin assignment, power pin grouping, and exposed-pad connection directly against the datasheet pinout table before fabrication.

This page organizes the verified product identity, core memory and clock characteristics, sourcing links, practical design guidance, and qualified replacement assessment. It also distinguishes exact drop-in replacements from parts that merely use a similar MCU or a related package, helping engineers avoid substitutions that require firmware, board-layout, or peripheral changes.

Alternativas drop-in para MKL04Z32VLC4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MKL04Z32VLC4 (mesmo formato e footprint) — diferindo em Flash Memory, Package, Architecture, Product Type.

NXP Semiconductors
Flash Memory: 32 KB (32K x 8)
Package: 32-HVQFN (5x5 mm)
Comparar com MKL04Z32VLC4 →
NXP Semiconductors
Flash Memory: 8 KB Flash
Package: 32-LQFP (7 x 7 mm)
Architecture: 32-bit
Comparar com MKL04Z32VLC4 →

Nenhuma alternativa drop-in disponível para este produto.

Solicitar alternativas

MKL04Z32VLC4 Classificações máximas e características elétricas

Product Type 32-bit ARM Cortex-M0+ microcontroller
Processor Core Arm Cortex-M0+
Architecture ARM 32-bit
Maximum CPU Frequency 48 MHz
Flash Memory 32 KB
Flash Organization 32K x 8
Supply Voltage Range 1.71 V to 3.6 V
Series Kinetis KL04
Encapsulamento 32-LQFP, 7 mm x 7 mm
Tipo de montagem Surface mount
Product Status Active
Software Ecosystem Kinetis L series-compatible

Guia de Configuração de Pinos do MKL04Z32VLC4 32-lqfp, 7 mm x 7 mm

Configuração de pinos para MKL04Z32VLC4 (pacote 32-lqfp, 7 mm x 7 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 32-lqfp, 7 mm x 7 mm para MKL04Z32VLC4

Nenhum dado detalhado de pinagem disponível para MKL04Z32VLC4.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MKL04Z32VLC4 é adequado para 6 aplicaçãos: Battery-Powered Sensor Node, Industrial Sensor and Actuator Controller, Building Automation Endpoint, Compact Consumer Accessory Controller, Motor and Relay Control Module, Low-Power Data Acquisition Module.

🧩

Battery-Powered Sensor Node

The MKL04Z32VLC4 fits a compact sensor node that periodically measures a physical quantity, validates the reading, and places the product into a low-power state between events. Its Arm Cortex-M0+ core operates up to 48 MHz, providing enough execution speed for sampling, filtering, and control logic, while 32 KB of flash can hold the application firmware and configuration data. The Kinetis KL0 family’s ultra-low-power focus is useful in battery designs where average current, sleep-mode leakage, and radio duty cycle determine service life. Use the device as the supervisory MCU when its 32-LQFP footprint, 1.71 V to 3.6 V operating range, and firmware capacity match the board.

🏭

Industrial Sensor and Actuator Controller

The MKL04Z32VLC4 can serve as the local controller for an industrial sensing module that converts analog or digital inputs into actuator commands. A 48 MHz Cortex-M0+ core can service timers, communication tasks, status logic, and control-loop routines, while 32 KB of flash provides a defined firmware budget. The 32-LQFP package supports compact control boards without requiring the area of a larger high-pin-count MCU. Confirm the required UART, SPI, I2C, timer, ADC, and digital I/O functions against the datasheet, and design isolation, surge protection, and grounding around the factory environment rather than relying on MCU ratings alone.

🏠

Building Automation Endpoint

The MKL04Z32VLC4 is appropriate for a connected building-automation endpoint that handles local inputs, drives relays or indicators, and coordinates low-rate building-network communication. Its 48 MHz processing capability allows responsive handling of local control logic without using a higher-power application processor, and the 32 KB flash store is suitable for a focused embedded application. The KL0 family’s low-power orientation supports devices expected to remain active but idle for long intervals. Engineer the communication and relay interfaces around the exact peripheral assignments and electrical limits in the manufacturer documentation, including isolation requirements for connected mains or field wiring.

📱

Compact Consumer Accessory Controller

The MKL04Z32VLC4 can control a compact consumer accessory with buttons, indicators, sensors, and one or more low-speed serial interfaces. Its Cortex-M0+ architecture provides 32-bit processing in a 32-LQFP package, while 48 MHz operation gives designers margin for responsive interaction logic and diagnostic routines. The 32 KB flash capacity favors applications with a defined feature set rather than heavy graphical workloads or large downloadable assets. Select an external flash device only if the application later exceeds the internal memory budget, and confirm the controller’s peripheral mix, GPIO count, and package pin multiplexing before schematic capture.

🔧

Motor and Relay Control Module

The MKL04Z32VLC4 can be used in a small motor-control or relay-control module when the application requires deterministic embedded sequencing but not a high-performance digital motor-control loop. The 48 MHz Cortex-M0+ core can coordinate position inputs, current sensing, fault detection, and output-state transitions, and the 32 KB flash store is adequate for a focused controller program. The MCU should not be treated as the sole protection mechanism for an inductive load; use appropriate driver circuitry, current limiting, flyback paths, and fault isolation. Verify timer, capture, compare, and analog functions against the exact datasheet before assigning pins or setting protection thresholds.

📊

Low-Power Data Acquisition Module

The MKL04Z32VLC4 suits a low-power data-acquisition module that samples sensors, performs local scaling, records operating statistics, and exposes processed results through a serial interface. Its 48 MHz Cortex-M0+ core can execute acquisition sequencing and filtering within the constraints of a 32 KB firmware area, and the Kinetis KL0 family is designed for compact, energy-conscious embedded products. Confirm the available ADC channels, sample rate, timer resources, and DMA capabilities in the manufacturer datasheet because the basic family summary does not establish every peripheral feature. Use local buffering only when RAM requirements remain within the device limit, and include calibration data in the application’s memory partition.

What are the key specifications of MKL04Z32VLC4 that engineers should know?
The MKL04Z32VLC4 combines a 32-bit Arm Cortex-M0+ core, 32 KB of flash, operation up to 48 MHz, and a 32-LQFP package in one active microcontroller. The NXP product information also identifies the device as a member of the Kinetis KL0 ultra-low-power family. Its operating supply range is 1.71 V to 3.6 V. Review the manufacturer datasheet for RAM, GPIO, timers, communication peripherals, and absolute electrical limits before assigning the device to a specific design.
What type of microcontroller is MKL04Z32VLC4?
The MKL04Z32VLC4 is a 32-bit Arm Cortex-M0+ microcontroller with 32 KB of embedded flash and a maximum operating frequency of 48 MHz. NXP places it in the Kinetis KL04 family, whose ultra-low-power MCUs target compact embedded systems and provide an entry point to the Kinetis L series. The device is packaged in a 32-LQFP, 7 mm x 7 mm surface-mount package.
Where can I download the MKL04Z32VLC4 datasheet PDF?
The official MKL04Z32VLC4 datasheet and supporting documentation can be reached through the NXP product page at https://www.nxp.com/part/MKL04Z32VLC4. The page links to the manufacturer data sheet, operating information, environmental information, and product notices. Use the KL04 Sub-Family Reference Manual for detailed register, clock, memory, and peripheral descriptions rather than relying on distributor copies alone.
Where can I find the MKL04Z32VLC4 pinout and 32-LQFP footprint?
The MKL04Z32VLC4 pin assignment is defined in the NXP manufacturer datasheet, while the recommended PCB land pattern is shown in the package drawing and associated design guidance. The device uses a 32-LQFP, 7 mm x 7 mm package. Assign every signal, power pin, ground connection, and exposed-pad requirement from those documents before routing the board, and preserve the manufacturer-recommended footprint dimensions and copper clearances.
What is the flash memory capacity of MKL04Z32VLC4?
The MKL04Z32VLC4 provides 32 KB of embedded flash, organized as 32K x 8, for firmware and fixed data storage. NXP identifies the MCU as an ARM Cortex-M0+ device operating up to 48 MHz. Designers should budget flash for the bootloader, application code, configuration, calibration values, and field updates, and should consult the reference manual for the memory map and option-byte behavior.
What supply voltage does MKL04Z32VLC4 require?
The MKL04Z32VLC4 operates from 1.71 V to 3.6 V according to the product comparison information published for this exact device. The exact core and I/O voltage combinations, internal regulator requirements, decoupling values, and absolute maximum ratings must be taken from the NXP datasheet. A regulated 3.3 V rail is common for the device family, but the final supply design depends on the selected clock, peripheral, and brownout settings.
What can replace the MKL04Z32VLC4?
The MKL04Z32VLC4 requires a genuine drop-in replacement to preserve the 32-LQFP footprint, pin functions, 32 KB flash capacity, Cortex-M0+ software model, and essential peripherals. No alternative is identified here as a verified drop-in match because the available cross-reference results do not establish complete pin compatibility for another manufacturer’s device. Related Kinetis parts or similarly packaged MCUs should be treated as redesign candidates until their pin tables, memory map, and peripheral assignments are checked.
Is the MKL04Z32VLC4 suitable for a low-power sensor node?
The MKL04Z32VLC4 is suitable for many low-power sensor-node functions because it belongs to the Kinetis KL0 ultra-low-power MCU family and provides 32 KB of flash with a 48 MHz Cortex-M0+ core. It can supervise a sensor, filter readings, and manage a low-duty-cycle wake sequence. Actual battery life depends on the selected sleep mode, sensor current, radio duty cycle, regulator efficiency, and leakage, so measure the complete load profile rather than estimating from CPU frequency alone.
MKL04Z32VLC4 vs MKL04Z32VFK4: which one should I choose?
The MKL04Z32VLC4 and MKL04Z32VFK4 share the MKL04Z32 base family and are listed with an Arm Cortex-M0+ core, 32 KB flash, and 48 MHz operation. Their package and temperature suffixes differ, so they are not automatically interchangeable despite similar core parameters. The C suffix part is associated with the 32-LQFP package for this listing, while the K suffix identifies another package configuration. Confirm the exact ordering code, pinout, temperature grade, and PCB footprint before selecting between them.
When should I choose MKL04Z32VLC4 instead of a larger Kinetis microcontroller?
Choose the MKL04Z32VLC4 when 32 KB of flash, an Arm Cortex-M0+ core, operation up to 48 MHz, and the 32-LQFP footprint satisfy the complete product requirement. It is appropriate for compact control and low-duty-cycle embedded functions where a larger memory footprint or additional peripherals would add unnecessary cost and board area. Move to a larger Kinetis device when the firmware exceeds 32 KB, RAM is insufficient, or required peripherals and I/O are absent.
What is the best NXP equivalent for MKL04Z32VLC4?
The closest NXP-family starting point is another MKL04Z32 device with a matching 32-LQFP package, temperature rating, flash configuration, and pin assignment. MKL04Z32VFK4 and MKL04Z32VLF4 were identified in related results, but their suffix-dependent packages and electrical options were not established as identical to the MKL04Z32VLC4. Treat them as related options rather than drop-in replacements until the NXP ordering information and datasheet package tables confirm the same land pattern.
Where can I buy MKL04Z32VLC4 online?
Use the Request a Quote form on this page to request MKL04Z32VLC4 availability, current lead time, and an order quote for the exact NXP ordering code. The manufacturer identifies the device as active, and an authorized distribution listing shows it in stock, but inventory changes by quantity and date. Quote requests should include your target quantity, required delivery date, packaging preference, and any required traceability documentation.
What is the price of MKL04Z32VLC4?
Submit the MKL04Z32VLC4 Request a Quote form on this page for current pricing, quantity breaks, and availability for the exact ordering code. The structured pricing area updates independently of the technical page, so a static price should not be used for budgeting or procurement approval. Include annual usage, forecast quantities, and packaging requirements when requesting the quote to obtain the most relevant commercial terms.
What is the lead time and stock status for MKL04Z32VLC4?
Request current stock and lead time for MKL04Z32VLC4 through the Request a Quote form on this page. NXP identifies the component as active, while distributor inventory can vary by package code, quantity, and fulfillment date. Provide the required quantity and target delivery date so the supplier can confirm whether available inventory, scheduled production, or another allocation best matches the schedule.
How does MKL04Z32VLC4 support software and tool compatibility?
The MKL04Z32VLC4 uses the Arm Cortex-M0+ architecture and belongs to the Kinetis KL0 family, which NXP states is software- and tool-compatible with other Kinetis L series devices. This compatibility can simplify development inside the Kinetis ecosystem, but it does not mean every peripheral or memory configuration is identical across the family. Pin multiplexing, interrupt vectors, clock controls, and peripheral behavior must be verified against the specific device datasheet and reference manual.

Dados de referência de engenharia para MKL04Z32VLC4 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the MKL04Z32VLC4 when a product needs a compact 32-bit control MCU with 32 KB of embedded flash, Arm Cortex-M0+ processing up to 48 MHz, and a 32-LQFP footprint. It is well suited to low-duty-cycle sensor nodes, industrial control modules, building-automation endpoints, and compact accessories where firmware is expected to fit within 32 KB. Select a larger Kinetis device when additional RAM, flash, GPIO, communication peripherals, or application-processing capability is required. Treat MKL04Z32VFK4 and MKL04Z32VLF4 as related family options, not confirmed drop-in replacements, until their package drawings and pin assignments match the MKL04Z32VLC4. No cross-brand alternative is recommended on the basis of package size or Cortex-M0+ compatibility alone. For a true drop-in decision, verify the complete pinout, exposed-pad connection, electrical limits, peripheral functions, clocking, debug interface, boot behavior, and firmware model against the original NXP documentation.

Notas de projeto

Use the manufacturer’s 32-LQFP land pattern and pin-1 orientation without changing the recommended pad dimensions. Place each supply decoupling capacitor directly between the relevant power and ground pins, with the ground connection kept short. Treat exposed-pad connections exactly as specified in the package drawing. Verify pin multiplexing against the datasheet before routing, because assigning a peripheral signal to the wrong ball can also affect boot, debug, and clock functions.

Budget the system rail against the MCU’s 1.71 V to 3.6 V operating range, peripheral loads, and peak current events rather than the CPU frequency alone. Provide local bulk and high-frequency decoupling close to the device and ensure the source can support dynamic current changes without excessive droop. If the board also powers motors, relays, LEDs, or wireless modules, isolate their high-current paths from the MCU supply network to prevent brownouts during switching.

Do not assume that another Kinetis MCU is pin-compatible merely because it has the same Cortex-M0+ core and similar memory capacity. Compare the 32-LQFP pin table, power pins, exposed pad, boot and debug pins, oscillator connections, and every used peripheral signal. Also confirm that migration does not exceed the target’s 32 KB flash limit. A substitute that requires firmware or board changes is a redesign candidate, not a drop-in replacement.

Keep the 48 MHz clock path short and place any required crystal or external clock components at the pins specified by the reference design. Route reset and debug signals away from high-current switching nodes, and maintain a continuous ground reference beneath the MCU. If the board combines sensitive analog measurement with digital control, partition analog and digital return paths deliberately and place filtering components near the signal source to prevent switching noise from entering the acquisition chain.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer product page links to environmental quality information, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not present in the cited result text.

Dados verificados em: 2026-11-14 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MKL04Z32VLC4 datasheet MKL04Z32VLC4 pinout MKL04Z32VLC4 datasheet pdf MKL04Z32VLC4 equivalent MKL04Z32VLC4 replacement MKL04Z32VLC4 price MKL04Z32VLC4 stock MKL04Z32VLC4 footprint MKL04Z32VLC4 schematic MKL04Z32VLC4 vs MKL04Z32VFK4 NXP MKL04Z32VLC4 32 LQFP Cortex-M0+ 32KB flash

Componentes & termos relacionados

NXP Semiconductors MKL04Z32VLC4 MKL04Z32 MKL04Z32VFK4 MKL04Z32VLF4 Kinetis KL04 Kinetis KL0 Kinetis L series Arm Cortex-M0+ ARM 32-bit architecture microcontroller MCU embedded processor semiconductor 32 KB flash memory 48 MHz clock 1.71 V to 3.6 V operating supply 32-LQFP LQFP package family surface-mount package low-power sensor node industrial control building automation Kinetis L series software compatibility
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ