NXP Semiconductors

MKL04Z8VLC4 - 48MHz Cortex-M0+ MCU | NXP | Embedded

N.º da peça: MKL04Z8VLC4 ✓ Ativo
32-LQFP (7 x 7 mm) Package 48 MHz Speed 8 KB Memory
MOQ: 1 |

MKL04Z8VLC4 Visão geral

NXP Semiconductors MKL04Z8VLC4 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M0+ processor, operating at 48 MHz with 8 KB of flash memory, 1 KB of SRAM, and a 32-LQFP 7 x 7 mm package. It belongs to the Kinetis KL0x family, an entry point into the Kinetis L series for compact, cost-sensitive embedded products.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one integrated circuit. The MKL04Z8VLC4 is an Arm Cortex-M0+ MCU, also called a 32-bit embedded microcontroller. Its compact architecture supports control-oriented products that need deterministic embedded processing, low standby power, and a small board footprint.

The principal device features include a 48 MHz Arm Cortex-M0+ core, 8 KB program flash, 1 KB SRAM, and a 32-bit architecture. NXP positions the KL0x family as ultra-low-power devices intended to bridge 8-bit designs into the broader Kinetis ecosystem. The family is software and tool compatible with other Kinetis L series devices, which can simplify migration when a project grows beyond the resources of the initial MCU.

The MKL04Z8VLC4 combines a small 7 x 7 mm LQFP package with embedded processing and low-power design. Its 8 KB flash limits firmware complexity, so application code must be organized conservatively. The 1 KB SRAM is also modest, making stack allocation, peripheral buffering, and real-time task design important. The 32-LQFP format provides a practical balance between compact size and externally accessible pins for prototyping, test, and mixed-signal peripheral connections.

Typical applications include low-cost sensor nodes, compact industrial controls, simple access-control equipment, battery-powered accessories, and small motor-control or interface modules. In these systems, the microcontroller can execute a control loop, read sensors, manage buttons or indicators, and coordinate low-speed communications while keeping the board area and energy consumption low.

Designers should reserve board area for the decoupling capacitors specified by NXP and confirm the exposed-pin requirements for the selected LQFP variant. Firmware architecture should account for the 8 KB flash and 1 KB SRAM limits, while production programming, trace configuration, and low-power behavior should be validated against the manufacturer datasheet and application guidance.

This product page combines the exact orderable MPN, manufacturer and distributor references, package details, lifecycle information, practical design considerations, and a focused same-family comparison to help engineers assess whether the MKL04Z8VLC4 fits a new embedded design.

Alternativas drop-in para MKL04Z8VLC4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MKL04Z8VLC4 (mesmo formato e footprint) — diferindo em Package, Architecture, Flash Memory, Product Type, Program Memory Size.

NXP Semiconductors
Package: 32-LQFP, 7 mm x 7 mm
Architecture: ARM 32-bit
Flash Memory: 32 KB
Comparar com MKL04Z8VLC4 →
NXP Semiconductors
Package: 32-LQFP (7x7 mm)
Program Memory Size: 16 KB (16K x 8) Flash
Comparar com MKL04Z8VLC4 →

MKL04Z16VLC4

✅ Drop-In ⚠️ Especificações não verificadas
📦 32-LQFP (7 x 7 mm)
Flash increases from 8 KB to 16 KB, a 100% increase; CPU frequency and package remain 48 MHz and 32-LQFP

📋 Alternativa de referência (fora do catálogo)

MKL04Z32VLC4

✅ Drop-In ⚠️ Especificações não verificadas
NXP Semiconductors
📦 32-LQFP (7 x 7 mm)
32-bit ARM Cortex-M0+ microcontroller · Arm Cortex-M0+ · ARM 32-bit · 48 MHz · 32 KB · 32K x 8 · 1.71 V to 3.6 V · Kinetis KL04

Consulte o preço

Ver ficha técnica →

MKL04Z8VLC4 Classificações máximas e características elétricas

Product Type 32-bit Microcontroller
Product Series Kinetis KL0x
Processor Core Arm Cortex-M0+
CPU Frequency 48 MHz
Architecture 32-bit
Program Memory Size 8 KB
Program Memory Organization 8K x 8
RAM Size 1 KB
Flash Memory 8 KB Flash
Encapsulamento 32-LQFP (7 x 7 mm)
Tipo de montagem Surface Mount
Core Family Kinetis L Series
Software Compatibility Compatible with Kinetis L series devices
Power Class Ultra-low-power MCU

Guia de Configuração de Pinos do MKL04Z8VLC4 32-lqfp (7 x 7 mm)

Configuração de pinos para MKL04Z8VLC4 (pacote 32-lqfp (7 x 7 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 32-lqfp (7 x 7 mm) para MKL04Z8VLC4

Nenhum dado detalhado de pinagem disponível para MKL04Z8VLC4.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MKL04Z8VLC4 é adequado para 6 aplicaçãos: Low-Power Sensor Node, Industrial Control Module, Battery-Powered Access Controller, Small Motor Control Board, Compact Data Acquisition Unit, Consumer Interface Controller.

🧩

Low-Power Sensor Node

The MKL04Z8VLC4 fits a compact sensor node that samples inputs, applies filtering, and records a short operating state between wake intervals. Its 48 MHz Arm Cortex-M0+ core provides ample execution speed for basic signal processing, while the KL0x family's ultra-low-power positioning supports energy-conscious designs. The 8 KB flash and 1 KB SRAM require disciplined code and buffer sizing, but remain workable for sensors that forward data rather than store large histories. A radio module, sensor interface, and low-power regulator can share the board, provided the final firmware budget, active current, and wake duration are verified against the datasheet.

🏭

Industrial Control Module

The MKL04Z8VLC4 can serve as the control processor in a small industrial module that reads switches, drives indicators, manages a simple actuator, and coordinates a low-speed field interface. Its 48 MHz Cortex-M0+ performance supports responsive control logic, and the 32-LQFP package exposes enough pins for practical prototype and production layouts. Industrial suitability must account for temperature range, supply limits, isolation, and EMC requirements that are not established by the ordering information alone. Firmware should use bounded queues and deterministic execution because only 1 KB of SRAM is available. The same package also permits memory-rich KL04 variants to be evaluated without changing the PCB footprint.

🔐

Battery-Powered Access Controller

The MKL04Z8VLC4 is appropriate for a battery-powered access controller that scans a keypad or reader interface, evaluates credentials, controls an electronic lock, and logs a small number of events. The ultra-low-power KL0x architecture supports a design that remains mostly inactive between user interactions, while the Arm Cortex-M0+ core can perform debouncing and protocol handling. Memory planning is the central constraint: authentication routines, drivers, and logging must fit within 8 KB flash and 1 KB SRAM. For stronger local cryptography or larger event history, MKL04Z16VLC4 or MKL04Z32VLC4 provides additional flash while preserving the same 32-LQFP footprint and 48 MHz operating speed.

⚡

Small Motor Control Board

The MKL04Z8VLC4 can coordinate a small brushless, stepper, or simple DC motor system when control functions are compact. At 48 MHz, the Cortex-M0+ core can execute state-machine logic, monitor position inputs, and generate timing commands, while the 32-LQFP package provides a practical route to external gate drivers and sensors. The MCU is not itself a power-stage device, so motor current, voltage, and transient requirements determine the surrounding driver architecture. Firmware and RAM budgets should be checked early because motion-control tables and diagnostic buffers can consume the 1 KB SRAM quickly. Higher-memory family variants retain the footprint when algorithms or production logging expand.

📟

Compact Data Acquisition Unit

The MKL04Z8VLC4 can form the core of a compact data-acquisition unit that reads a limited number of analog or digital channels, performs basic scaling, and forwards results through a serial interface. Its 48 MHz Cortex-M0+ core is suitable for deterministic sampling and control routines, and the 1 KB SRAM can support short processing windows when buffering is kept small. The 8 KB flash limit favors compact drivers and minimal library overhead, so applications requiring extensive history, protocol stacks, or high-rate sampling should consider MKL04Z16VLC4 or MKL04Z32VLC4. Those options preserve the 32-LQFP footprint and allow a PCB common platform across several memory configurations.

📱

Consumer Interface Controller

The MKL04Z8VLC4 is suitable for a compact consumer interface controller that manages buttons, LEDs, a display, and a simple serial host connection. The small 7 x 7 mm LQFP package helps reduce board area, while the 48 MHz processor provides enough performance for graphical state management and debounced input handling. Because the device has only 8 KB flash and 1 KB SRAM, interface frameworks should be selected carefully and display buffers should not consume the entire RAM. If the product plan includes richer graphics, additional protocols, or larger application logic, the 16 KB and 32 KB family variants provide more code space without changing the PCB land pattern.

Resumo dos produtos recomendados

MKL04Z16VLC4 Same-package family option with more program memory Usado em: Low-Power Sensor Node, Industrial Control Module, Battery-Powered Access Controller, Small Motor Control Board, Compact Data Acquisition Unit, Consumer Interface Controller MKL04Z32VLC4 NXP Semiconductors Usado em: Low-Power Sensor Node, Industrial Control Module, Battery-Powered Access Controller, Small Motor Control Board, Compact Data Acquisition Unit, Consumer Interface Controller
What is the MKL04Z8VLC4?
The MKL04Z8VLC4 is an active NXP Semiconductors Kinetis KL0x ultra-low-power microcontroller with an Arm Cortex-M0+ core, 48 MHz operating frequency, 8 KB flash, 1 KB SRAM, and a 32-LQFP 7 x 7 mm package. According to the NXP product page, the KL0x family provides an entry point into the Kinetis L series for compact embedded control designs.
What are the key specifications of MKL04Z8VLC4?
The MKL04Z8VLC4 combines a 48 MHz Arm Cortex-M0+ processor, 32-bit architecture, 8 KB flash organized as 8K x 8, and 1 KB SRAM in a 32-LQFP 7 x 7 mm package. The NXP product page identifies it as an active Kinetis KL0x device, while the manufacturer datasheet remains the authoritative source for electrical limits, peripheral details, and pin assignments.
Where can I download the MKL04Z8VLC4 datasheet PDF?
The MKL04Z8VLC4 datasheet can be downloaded from the official NXP documentation page for the KL04 family, with the product page also providing a direct Data Sheet link. Use the NXP copy for design decisions because it defines the exact electrical limits, memory map, peripheral behavior, package dimensions, and recommended application circuit for this family.
Where can I find the MKL04Z8VLC4 pinout?
The MKL04Z8VLC4 pinout is defined by the pin assignment table in the NXP KL04 manufacturer datasheet and its 32-LQFP package drawing. Use the pin-description table when assigning PCB tracks, especially for power, ground, reset, programming, clock, and multiplexed peripheral functions; signal names and alternate functions must follow that document.
How much flash and RAM does the MKL04Z8VLC4 have?
The MKL04Z8VLC4 provides 8 KB of flash memory and 1 KB of SRAM. NXP identifies the program memory as 8K x 8. These capacities suit compact control tasks, but firmware should minimize library overhead, avoid large buffer pools, and carefully manage stack depth to conserve both memory spaces.
What can replace the MKL04Z8VLC4?
The closest same-family drop-in choices are the MKL04Z16VLC4 and MKL04Z32VLC4, both in the 32-LQFP 7 x 7 mm package with the same 48 MHz Arm Cortex-M0+ platform. Their higher flash capacities add 8 KB and 24 KB respectively, but exact peripheral compatibility and production suitability must be checked against the NXP datasheet before substitution.
Can MKL04Z16VLC4 replace MKL04Z8VLC4?
The MKL04Z16VLC4 can serve as a same-package, pin-compatible replacement when its electrical, peripheral, and software configuration matches the target design. It increases flash from 8 KB to 16 KB while retaining the 48 MHz Arm Cortex-M0+ core and 32-LQFP 7 x 7 mm package. Firmware and pin multiplexing still require verification before production use.
When should I choose MKL04Z8VLC4 over MKL04Z32VLC4?
Choose MKL04Z8VLC4 when an 8 KB application and 1 KB SRAM are sufficient and minimizing cost, board resources, and firmware complexity are priorities. Choose MKL04Z32VLC4 when code growth requires 32 KB of flash while preserving the 32-LQFP footprint and 48 MHz Cortex-M0+ execution speed. Both devices require final feature verification in the family datasheet.
Is MKL04Z8VLC4 suitable for low-power sensor nodes?
The MKL04Z8VLC4 is suitable for compact sensor nodes because NXP classifies the KL0x family as ultra-low-power and provides 8 KB flash, 1 KB SRAM, and a 48 MHz Arm Cortex-M0+ core. Its suitability depends on the required radio, sensor, sampling rate, and duty cycle; use the datasheet's low-power modes and measured current limits for the final battery budget.
What is the lead time for MKL04Z8VLC4?
The current lead time for MKL04Z8VLC4 should be requested through the Request a Quote form on this page. NXP lists the exact orderable device as active, but an active lifecycle status does not by itself guarantee a fixed production lead time, allocation, or shipment date for a particular order quantity.
Is MKL04Z8VLC4 in stock?
Current MKL04Z8VLC4 inventory and delivery status should be confirmed through the Request a Quote form on this page. The manufacturer identifies the part as active, while distributor landing pages indicate that availability and pricing are maintained dynamically. Share the required quantity, date code, and packaging preference when requesting a quotation.
Where can I buy MKL04Z8VLC4 online?
Use the Request a Quote form on this page to request MKL04Z8VLC4 pricing, stock, lot traceability, and lead time. NXP identifies the device as active and lists it as a 32-LQFP microcontroller with 8 KB flash. Providing the required quantity and whether you need tape-and-reel or another shipping format helps establish an accurate quotation.
What is the price of MKL04Z8VLC4?
The current MKL04Z8VLC4 price depends on order quantity, date code, packaging, and market conditions. Request a quote through the Request a Quote form on this page for the configuration you intend to purchase. The structured pricing area on this page should be used for the latest displayed commercial data.
MKL04Z8VLC4 vs MKL04Z32VLC4 - which is better for embedded control?
MKL04Z8VLC4 is the better fit for a small control application when 8 KB of flash is sufficient, while MKL04Z32VLC4 is preferable when firmware needs more program memory. Both operate at 48 MHz with an Arm Cortex-M0+ core and use a 32-LQFP 7 x 7 mm package, so the decision primarily concerns firmware capacity and qualification.
Is there an NXP equivalent for the MKL04Z8VLC4?
The NXP MKL04Z16VLC4 is the closest higher-memory same-package alternative, providing 16 KB flash instead of 8 KB while retaining the 48 MHz Cortex-M0+ core and 32-LQFP 7 x 7 mm package. A cross-brand equivalent is not established because the available cross-reference results do not identify a verified pin-compatible part.

Dados de referência de engenharia para MKL04Z8VLC4 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose MKL04Z8VLC4 for compact control products whose firmware fits comfortably within 8 KB of flash and 1 KB of SRAM. Its 48 MHz Arm Cortex-M0+ core provides more execution headroom than an 8-bit architecture, while the 32-LQFP 7 x 7 mm package supports a manageable surface-mount layout. Choose MKL04Z16VLC4 when moderate firmware growth is expected but 16 KB remains sufficient; it preserves the core, package, and basic platform characteristics. Choose MKL04Z32VLC4 when application logic, drivers, diagnostics, or protocol handling require 32 KB. In every case, confirm supply voltage, temperature range, pin multiplexing, peripheral availability, and low-power behavior against the KL04 datasheet before freezing the design.

Comparação com alternativas

Parâmetro Este produto MKL04Z16VLC4 MKL04Z32VLC4
Package 32-LQFP (7 x 7 mm) 32-LQFP (7 x 7 mm) 32-LQFP (7 x 7 mm)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Processor Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
CPU Frequency 48 MHz 48 MHz 48 MHz
Flash Memory 8 KB 16 KB 32 KB
RAM Size 1 KB 1 KB 1 KB
Architecture 32-bit 32-bit 32-bit
Product Family Kinetis KL0x Kinetis KL0x Kinetis KL0x
Power Class Ultra-low-power MCU Ultra-low-power MCU Ultra-low-power MCU

Principais diferenciais

  • Lower flash capacity supports a smaller firmware image (vs MKL04Z16VLC4)
  • More program memory without changing the PCB footprint (vs MKL04Z32VLC4)
  • Entry-level memory footprint within the Kinetis KL0x platform (vs MKL04Z16VLC4)

Notas de projeto

Use the NXP KL04 datasheet layout and pin-description tables to place all required bypass capacitors close to their supply pins. Preserve the package orientation, pin-1 indication, exposed thermal-pad treatment where applicable, and recommended copper geometry. Do not infer the pinout from the package family name because alternate peripheral functions and power pins are assigned by the exact ordering code.

The 8 KB flash and 1 KB SRAM are the dominant firmware constraints. Map the linker regions before committing to drivers or middleware, reserve stack space for the deepest interrupt path, and avoid allocating full-frame buffers when streaming or fixed-point processing will fit. If the application exceeds the 8 KB limit, move to MKL04Z16VLC4 or MKL04Z32VLC4 while retaining the same land pattern.

Do not treat the 48 MHz CPU frequency as a guaranteed operating duty cycle. The real power consumption depends on clock configuration, active versus sleep time, peripheral activity, voltage, and temperature. Establish a power budget from the manufacturer operating modes and then validate it on the assembled board, including regulator efficiency and leakage from connected peripherals.

Keep switching-regulator, motor-driver, and high-current digital paths away from sensitive analog inputs and communication lines. Provide a quiet return path for each supply domain and route clocks and high-speed signals over continuous ground planes. Although the MKL04Z8VLC4 operates at 48 MHz, electromagnetic performance depends on the complete board, including connectors, copper area, and external switching devices.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The NXP product page identifies MKL04Z8VLC4 as active and provides environmental-quality information, but the available ordering information does not state a specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals classification.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MKL04Z8VLC4 datasheet MKL04Z8VLC4 pinout MKL04Z8VLC4 datasheet pdf MKL04Z8VLC4 specifications MKL04Z8VLC4 48MHz Cortex-M0+ MKL04Z8VLC4 8KB flash MKL04Z8VLC4 LQFP-32 NXP MKL04Z8VLC4 MKL04Z8VLC4 replacement MKL04Z8VLC4 equivalent MKL04Z8VLC4 vs MKL04Z16VLC4 MKL04Z8VLC4 price MKL04Z8VLC4 stock MKL04Z8VLC4 low power sensor

Componentes & termos relacionados

NXP Semiconductors MKL04Z8VLC4 MKL04Z16VLC4 MKL04Z32VLC4 Arm Cortex-M0+ Arm microcontroller MCU embedded microcontroller 32-bit microcontroller Kinetis KL0x Kinetis L series ultra-low-power MCU 8 KB Flash 1 KB SRAM 48 MHz 32-LQFP LQFP package surface mount SMD low-power sensor node industrial control module battery-powered access controller firmware embedded control
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ