NXP Semiconductors

MKL13Z64VLH4 - 48MHz Cortex-M0+ 64KB MCU | NXP

N.º da peça: MKL13Z64VLH4 ✓ Ativo
3 V Vdss 64-LQFP, 10 x 10 mm Package 48 MHz Speed 64 KB (64K x 8) Memory
MOQ: 1 |

MKL13Z64VLH4 Visão geral

NXP Semiconductors MKL13Z64VLH4 is an ultra-low-power Kinetis KL13 microcontroller with a 48 MHz 32-bit Arm Cortex-M0+ core, 64 KB of Flash memory, and a 64-LQFP 10 x 10 mm package. It is designed for portable applications that require USB device support, analog peripherals, and low-power embedded control.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The Kinetis KL13 belongs to the microcontroller, embedded processor, and power-management hierarchy for compact battery-operated equipment. Its Arm Cortex-M0+ architecture supports efficient event-driven control, while integrated communication and analog interfaces reduce the number of external components required around the MCU.

The MKL13Z64VLH4 combines a 48 MHz operating frequency with 64 KB of programmable Flash and 8 KB of SRAM. Connectivity includes FlexIO, I2C, IrDA, SPI, and UART/USART, while peripheral resources include DMA, PWM, a watchdog timer, and analog functions. USB device support adds a practical interface for portable equipment that must exchange data with a host while keeping the implementation compact.

The 64-LQFP package provides 64 externally accessible connections in a 10 x 10 mm footprint. Its single Arm Cortex-M0+ core executes 32-bit instructions, and the device belongs to the Kinetis KL1 general-purpose, ultra-low-power MCU family. Tool support includes Keil MDK and Keil Studio, allowing firmware development through the Arm software environment while retaining access to standard peripheral drivers and debugging workflows.

Typical uses include USB-connected portable instruments, compact data loggers, industrial sensing nodes, battery-powered accessories, and small control boards. The device is particularly appropriate when a design needs a 48 MHz control loop, moderate embedded memory, and multiple serial interfaces without moving to a higher-performance Cortex-M3 or Cortex-M4-class MCU.

PCB design should preserve the exact 64-LQFP land pattern and route high-speed or sensitive USB signals according to the manufacturer’s reference guidance. Validate power sequencing, decoupling, clock stability, and the analog reference network on the assembled prototype; checking only nominal operating conditions can conceal startup, noise, or signal-integrity problems.

This page combines the manufacturer’s product description, distributor identification, cross-reference results, practical design guidance, and a parameter comparison focused on selecting or replacing this exact microcontroller. It also separates confirmed technical facts from information that must be confirmed in the datasheet before a new PCB or firmware branch is released.

Alternativas drop-in para MKL13Z64VLH4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MKL13Z64VLH4 (mesmo formato e footprint) — diferindo em Connectivity, Mounting Type, Package, Peripherals.

NXP Semiconductors
Connectivity: I2C, LINbus, SPI, UART/USART
Mounting Type: Surface Mount
Package: 64-LQFP (10x10 mm)
Comparar com MKL13Z64VLH4 →

MKL16Z64VLH4

✅ Drop-In
📦 64-LQFP (10x10)
Same 48 MHz clock and 64 KB Flash rating (0% difference in each), but the Kinetis peripheral configuration differs and must be checked before substitution.

📋 Alternativa de referência (fora do catálogo)

MKL17Z64VLH4

✅ Drop-In
📦 64-LQFP (10x10)
Same 48 MHz clock and 64 KB Flash rating (0% difference in each), with a different USB and low-power peripheral configuration requiring firmware and pin review.

📋 Alternativa de referência (fora do catálogo)

MKL33Z64VLH4

✅ Drop-In
📦 64-LQFP (10x10)
Same 48 MHz clock and 64 KB Flash rating (0% difference in each), while the broader peripheral set differs and requires hardware and software validation.

📋 Alternativa de referência (fora do catálogo)

MKL13Z64VLH4 Classificações máximas e características elétricas

Core Processor Arm Cortex-M0+
Core Architecture 32-bit
Maximum CPU Frequency 48 MHz
Flash Memory 64 KB (64K x 8)
SRAM 8 KB
Tensão de alimentação 3 V
Core Count 1
Encapsulamento 64-LQFP, 10 x 10 mm
Tipo de montagem SMD
USB Support USB device
Connectivity FlexIO, I2C, IrDA, SPI, UART/USART
Peripherals DMA, PWM, watchdog timer
Development Tool Support Keil MDK and Keil Studio
Shipping Format Tray
Standard Package Quantity 160 units
Moisture Sensitivity Level MSL 3, 168 hours
REACH Status REACH unaffected
ECCN 3A991A2

Guia de Configuração de Pinos do MKL13Z64VLH4 160 units

Configuração de pinos para MKL13Z64VLH4 (pacote 160 units). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 160 units para MKL13Z64VLH4

Nenhum dado detalhado de pinagem disponível para MKL13Z64VLH4.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MKL13Z64VLH4 é adequado para 6 aplicaçãos: USB Portable Data Logger, Industrial Sensor Node, Battery-Powered Instrument, USB Accessory Controller, Compact Control Panel, Portable Measurement Product.

🧩

USB Portable Data Logger

The MKL13Z64VLH4 fits a compact USB-connected logger because it combines a 48 MHz Arm Cortex-M0+ core with 64 KB of Flash, 8 KB of SRAM, and USB device support. Its FlexIO, I2C, SPI, UART/USART, DMA, and watchdog resources support sensor acquisition, buffering, and host communication without requiring a larger processor. The 64-LQFP package keeps the controller compact while exposing the full set of mixed-signal and serial connections. Engineering trade-offs include the limited 8 KB SRAM, which requires careful buffering, and the need to verify the exact USB clock, power, and signal-routing requirements in the NXP reference design before PCB release.

🏭

Industrial Sensor Node

The MKL13Z64VLH4 is appropriate for an industrial sensor node that must combine several low-speed sensors with local control and serial backhaul. Its 48 MHz Cortex-M0+ core provides timing for sampling and filtering, while 64 KB of Flash accommodates application firmware and 8 KB of SRAM supports short acquisition buffers. FlexIO, I2C, SPI, UART/USART, DMA, PWM, and the watchdog timer allow sensor, actuator, and communications tasks to be organized efficiently. The 3 V operating supply also fits many embedded industrial architectures. Before deployment, verify analog accuracy, external clock requirements, ESD strategy, and the industrial temperature range in the current manufacturer documentation.

🔧

Battery-Powered Instrument

The MKL13Z64VLH4 supports battery-powered instruments where a 48 MHz control path is useful but energy efficiency is more important than maximum processor performance. The Kinetis KL13 family is positioned as an ultra-low-power MCU family, and this device adds 64 KB of Flash, 8 KB of SRAM, mixed serial interfaces, and USB device capability. FlexIO and DMA can reduce processor involvement during data movement, while the watchdog timer supports recovery from abnormal operation. Actual runtime depends on the selected clock mode, duty cycle, USB activity, analog conversion rate, and peripheral sleep behavior. Prototype the power budget across active, idle, and sleep states instead of relying only on nominal operating frequency.

📱

USB Accessory Controller

The MKL13Z64VLH4 can serve as the control and interface MCU in a USB accessory that needs local state handling in addition to enumeration and data transfer. Its USB device support directly matches that role, while the 48 MHz Cortex-M0+ core can manage protocol processing, configuration, and user-interface updates. I2C and SPI support common sensors and display or storage devices, and UART/USART provides a path for internal configuration. The 64-LQFP footprint is convenient for boards that need broad mixed-signal connectivity. Design reviews should confirm device-role support, bus-speed configuration, required descriptors, clock tolerance, and whether USB suspend behavior fits the product’s power architecture.

📺

Compact Control Panel

The MKL13Z64VLH4 is suitable for a compact control panel requiring several interfaces, periodic sensing, local actuation, and a modest embedded codebase. Its FlexIO, I2C, SPI, UART/USART, PWM, DMA, and watchdog resources allow displays, keys, sensors, and actuators to share one controller. The 48 MHz Cortex-M0+ core provides sufficient control bandwidth while the 64 KB Flash and 8 KB SRAM target focused embedded tasks. Use the general-purpose 64-LQFP package when the design needs more external connections than a very small MCU package provides. Layout and firmware planning must account for display refresh timing, bus contention, debounce intervals, and any requirement for firmware updates over USB.

⚡

Portable Measurement Product

The MKL13Z64VLH4 fits portable measurement products that combine analog observation, digital control, data transfer, and low-power operation. NXP describes the device as an ultra-low-power Kinetis KL13 MCU with analog peripherals, USB device support, and a 48 MHz Arm Cortex-M0+ core. Analog inputs can be sampled while DMA transfers data, reducing the processing burden associated with 64 KB of Flash and 8 KB of SRAM. FlexIO and I2C allow expansion for additional converters, while SPI or UART/USART supports external instrumentation. Validate measurement accuracy, reference stability, calibration storage, thermal effects, and USB power behavior on hardware rather than treating peripheral availability as proof of application performance.

What are the key specifications of MKL13Z64VLH4 that engineers should know?
The MKL13Z64VLH4 is a 48 MHz, 32-bit Arm Cortex-M0+ microcontroller with 64 KB of Flash memory, 8 KB of SRAM, and USB device support in a 64-LQFP package. According to the NXP product information, it also provides FlexIO, I2C, IrDA, SPI, UART/USART, DMA, PWM, a watchdog timer, and analog peripherals. Its 3 V supply and 10 x 10 mm package make it suited to compact, low-power portable designs.
What is the operating voltage of MKL13Z64VLH4?
The MKL13Z64VLH4 operates from a 3 V supply. According to the NXP product description and the listed device specifications, it is a Kinetis KL13 general-purpose microcontroller based on the 32-bit Arm Cortex-M0+ core. Confirm the complete recommended operating limits, internal voltage rails, and power-supply tolerances in the manufacturer datasheet before releasing a new power-supply design.
How much Flash and SRAM does MKL13Z64VLH4 have?
The MKL13Z64VLH4 provides 64 KB of Flash memory organized as 64K x 8 and 8 KB of SRAM. According to the NXP product information and the Kinetis KL13 datasheet listing, this capacity is intended for compact embedded applications that need moderate firmware and working-memory space. Plan memory allocation carefully if the firmware includes USB stacks, data buffering, or field-upgrade logic.
What peripherals and interfaces are available on MKL13Z64VLH4?
The MKL13Z64VLH4 includes FlexIO, I2C, IrDA, SPI, UART/USART, DMA, PWM, a watchdog timer, USB device support, and analog peripherals. According to the NXP product information, this interface mix supports sensors, serial accessories, portable data-capture products, and compact control systems. Use the pin-description table in the manufacturer datasheet when assigning every peripheral signal to the 64-LQFP footprint.
Where can I download the MKL13Z64VLH4 datasheet PDF?
The official MKL13Z64VLH4 datasheet and product resources are available from the NXP product page linked on this page. According to the NXP listing, the device is a Kinetis KL13 microcontroller with a 48 MHz Arm Cortex-M0+ core, 64 KB of Flash, and USB device support. Download the current manufacturer document and verify its revision before using pin, timing, or electrical-limit information in a production design.
Where can I find the MKL13Z64VLH4 pinout?
The MKL13Z64VLH4 pin assignments are shown in the pin-description table of the current NXP Kinetis KL13 datasheet. The device uses a 64-LQFP, 10 x 10 mm package, but pin functions can vary by device variant and peripheral instance. Cross-check pin multiplexing, alternate-function selection, supply pins, ground pins, debug functions, and USB routing against the exact datasheet revision.
Is MKL13Z64VLH4 suitable for USB and battery-powered applications?
The MKL13Z64VLH4 is suitable for many USB-connected and battery-powered portable designs because it combines USB device support with an ultra-low-power Kinetis KL13 platform. According to the NXP product information, the device operates from 3 V and runs at up to 48 MHz. Actual battery life depends on the selected sleep modes, clock configuration, USB duty cycle, analog activity, and board-level leakage.
MKL13Z64VLH4 vs MKL17Z64VLH4 - which is better for a USB design?
Both MKL13Z64VLH4 and MKL17Z64VLH4 use a 48 MHz Arm Cortex-M0+ architecture with 64 KB of Flash and USB connectivity, and both are listed in 64-LQFP packaging. The MKL17Z64VLH4 is described as a complete Kinetis family variant with USB connectivity and low-power operation. Choose the MKL17Z64VLH4 only after checking its detailed peripheral map against the required USB, analog, timing, and communication functions.
When should I choose MKL13Z64VLH4 over MKL16Z64VLH4?
Choose the MKL13Z64VLH4 when a design requires the documented combination of 48 MHz Cortex-M0+ performance, 64 KB of Flash, 8 KB of SRAM, USB device support, and the Kinetis KL13 peripheral set. The MKL16Z64VLH4 is a same-family 64-LQFP alternative with the same 48 MHz and 64 KB headline ratings, but its detailed peripheral configuration differs. Confirm the required timers, communication channels, analog functions, and pin mapping before substituting it.
What can replace MKL13Z64VLH4 on the same PCB?
The closest documented replacements are MKL16Z64VLH4, MKL17Z64VLH4, and MKL33Z64VLH4 because each is identified in cross-reference results as a 64-LQFP Kinetis family member with a 48 MHz Cortex-M0+ core and 64 KB of Flash. They should be treated as engineering-review candidates rather than automatic substitutions, since peripheral availability, pin multiplexing, USB behavior, and firmware initialization can differ even when the package matches.
Is MKL13Z64VLH4 the same as MKL33Z64VLH4?
No, the MKL13Z64VLH4 and MKL33Z64VLH4 are not functionally identical despite sharing a 64-LQFP format and matching headline CPU and Flash ratings. According to the cross-reference data, both are Kinetis Cortex-M0+ devices with a 48 MHz core and 64 KB of Flash, but their broader peripheral resources differ. A board-level replacement also requires checking package pins, clocking, memory organization, peripherals, and software support.
Can MKL13Z64VLH4 be used with Keil MDK or Keil Studio?
The MKL13Z64VLH4 can be developed with Arm Keil MDK and Keil Studio. The Arm device listing specifically identifies the MKL13Z64VLH4 as a supported NXP microcontroller, while the NXP product page confirms its 48 MHz Arm Cortex-M0+ core and 64 KB of Flash. Install the matching device pack and verify clock, flash-algorithm, debugger, and USB stack configurations against the current NXP and Arm documentation.
What is the lifecycle status of MKL13Z64VLH4?
The MKL13Z64VLH4 is presented as an active NXP product in the current manufacturer and distributor listings. The NXP product page remains available, and major distributor records identify the exact 64-LQFP part number. Confirm ordering status, regional inventory, and any longevity-program details directly through the Request a Quote form on this page before committing a production schedule.
Where can I buy MKL13Z64VLH4 and check current availability?
Use the Request a Quote form on this page to request current MKL13Z64VLH4 availability, lot traceability, and delivery information. The device is a standard NXP 64-LQFP microcontroller with an exact manufacturer part number, so its ordering identity should remain unchanged across quotations. Confirm the requested quantity, tray packaging, date code, and production-schedule requirements when submitting the request.
What is the lead time for MKL13Z64VLH4?
The current lead time for MKL13Z64VLH4 should be requested through the Request a Quote form on this page because stock and scheduling can change with production volume and date-code requirements. The part is listed as a 64-LQFP, 160-unit tray configuration. Include your requested quantity, target delivery date, acceptable date-code window, and whether multiple production lots must be consolidated.
Is MKL13Z64VLH4 RoHS compliant and suitable for portable products?
The MKL13Z64VLH4 is suitable for many portable products, but its RoHS and AEC-Q100 status must be confirmed from the current NXP product documentation before compliance is claimed. The cross-reference record identifies the part as REACH unaffected and classifies it under ECCN 3A991A2. Its 3 V ultra-low-power architecture and USB device support support portable use, while automotive qualification should not be assumed.

Dados de referência de engenharia para MKL13Z64VLH4 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the MKL13Z64VLH4 for compact embedded products that specifically require a 48 MHz Arm Cortex-M0+ core, 64 KB of Flash, 8 KB of SRAM, USB device support, analog peripherals, and a broad mix of FlexIO, I2C, SPI, IrDA, and UART/USART interfaces. Consider the MKL17Z64VLH4 when its documented USB and low-power configuration better matches the design. Use the MKL16Z64VLH4 as a same-package Kinetis engineering-review candidate when its complete peripheral map satisfies the application. Evaluate the MKL33Z64VLH4 when its broader resource set is useful. None should be treated as an automatic substitution: compare all 64 pins, alternate functions, clocking, power, USB routing, peripheral instance counts, memory organization, device headers, and firmware initialization before releasing a replacement.

Comparação com alternativas

Parâmetro Este produto MKL16Z64VLH4 MKL17Z64VLH4 MKL33Z64VLH4
Package 64-LQFP (10x10) 64-LQFP (10x10) 64-LQFP (10x10) 64-LQFP (10x10)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
CPU Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum Frequency 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 64 KB (64K x 8) 64 KB 64 KB 64 KB

Principais diferenciais

  • Documented USB device capability in a compact general-purpose MCU (vs MKL33Z64VLH4)
  • Matches the headline CPU and memory ratings of the closest same-family candidate (vs MKL16Z64VLH4)
  • USB-equipped Kinetis alternative with identical clock and Flash ratings (vs MKL17Z64VLH4)

Notas de projeto

Route USB D+ and D- as a short, controlled-impedance differential pair over a continuous reference plane. Keep the connector, protection devices, and MCU connection compact, minimize vias and stubs, and follow the NXP recommended layout. Confirm the MCU pin assignments and USB transceiver requirements in the current datasheet because peripheral multiplexing and package options determine the final topology.

Build the 3 V rail with low-noise decoupling close to the MCU supply pins and preserve the voltage and current limits defined in the manufacturer datasheet. Verify startup sequencing, external clock requirements, analog-reference stability, and USB bus-powered versus self-powered operation. A scope measurement at the MCU pins is preferable to relying only on measurements at the power-source connector.

Do not treat a shared 64-LQFP outline as proof of unconditional interchangeability. Before replacing MKL13Z64VLH4, compare the complete pin-description table, alternate functions, power pins, clock pins, USB-capable pins, peripheral instance counts, and memory organization. Also review startup code, linker memory definitions, device headers, and low-power transitions so a hardware match does not introduce a firmware mismatch.

Assign the 64-LQFP footprint from the exact manufacturer package drawing and check pin-1 orientation against the PCB library. Maintain soldering-mask and paste-mask clearance for fine-pitch leads, and provide thermal copper around the device while avoiding unintended coupling between sensitive analog inputs and switching or high-current nets. Validate assembly using the manufacturer’s land pattern and assembly guidelines.

Informações de conformidade

RoHS
Unknown
REACH
Compliant
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The cross-reference record identifies the exact device as REACH unaffected and lists ECCN 3A991A2. RoHS, AEC-Q100 qualification, lead-free status, halogen-free status, and conflict-minerals compliance require confirmation in the current NXP documentation.

Dados verificados em: 2026-11-14 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MKL13Z64VLH4 datasheet MKL13Z64VLH4 pinout MKL13Z64VLH4 datasheet pdf MKL13Z64VLH4 specifications MKL13Z64VLH4 price MKL13Z64VLH4 stock NXP MKL13Z64VLH4 MKL13Z64VLH4 equivalent MKL13Z64VLH4 replacement MKL13Z64VLH4 vs MKL17Z64VLH4 MKL13Z64VLH4 footprint MKL13Z64VLH4 USB application circuit

Componentes & termos relacionados

NXP Semiconductors MKL13Z64VLH4 MKL16Z64VLH4 MKL17Z64VLH4 MKL33Z64VLH4 Kinetis KL13 Kinetis KL1 Arm Cortex-M0+ ARM Cortex-M0+ microcontroller embedded processor semiconductor ultra-low-power MCU USB device FlexIO I2C IrDA SPI UART/USART DMA PWM watchdog timer 64-LQFP LQFP package family surface-mount package 64 KB Flash 8 KB SRAM 48 MHz 3 V supply Keil MDK Keil Studio REACH ECCN 3A991A2
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ