MKL13Z64VLH4 - 48MHz Cortex-M0+ 64KB MCU | NXP
Teilenummer: MKL13Z64VLH4 ✓ AktivMKL13Z64VLH4 Übersicht
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The Kinetis KL13 belongs to the microcontroller, embedded processor, and power-management hierarchy for compact battery-operated equipment. Its Arm Cortex-M0+ architecture supports efficient event-driven control, while integrated communication and analog interfaces reduce the number of external components required around the MCU.
The MKL13Z64VLH4 combines a 48 MHz operating frequency with 64 KB of programmable Flash and 8 KB of SRAM. Connectivity includes FlexIO, I2C, IrDA, SPI, and UART/USART, while peripheral resources include DMA, PWM, a watchdog timer, and analog functions. USB device support adds a practical interface for portable equipment that must exchange data with a host while keeping the implementation compact.
The 64-LQFP package provides 64 externally accessible connections in a 10 x 10 mm footprint. Its single Arm Cortex-M0+ core executes 32-bit instructions, and the device belongs to the Kinetis KL1 general-purpose, ultra-low-power MCU family. Tool support includes Keil MDK and Keil Studio, allowing firmware development through the Arm software environment while retaining access to standard peripheral drivers and debugging workflows.
Typical uses include USB-connected portable instruments, compact data loggers, industrial sensing nodes, battery-powered accessories, and small control boards. The device is particularly appropriate when a design needs a 48 MHz control loop, moderate embedded memory, and multiple serial interfaces without moving to a higher-performance Cortex-M3 or Cortex-M4-class MCU.
PCB design should preserve the exact 64-LQFP land pattern and route high-speed or sensitive USB signals according to the manufacturer’s reference guidance. Validate power sequencing, decoupling, clock stability, and the analog reference network on the assembled prototype; checking only nominal operating conditions can conceal startup, noise, or signal-integrity problems.
This page combines the manufacturer’s product description, distributor identification, cross-reference results, practical design guidance, and a parameter comparison focused on selecting or replacing this exact microcontroller. It also separates confirmed technical facts from information that must be confirmed in the datasheet before a new PCB or firmware branch is released.
Drop-in-Alternativen für MKL13Z64VLH4 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MKL13Z64VLH4 (gleiche Bauform und Footprint) – abweichend in Connectivity, Mounting Type, Package, Peripherals.
MKL16Z64VLH4
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MKL17Z64VLH4
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MKL33Z64VLH4
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MKL13Z64VLH4 Grenzwerte & elektrische Eigenschaften
| Core Processor | Arm Cortex-M0+ |
| Core Architecture | 32-bit |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 8 KB |
| Versorgungsspannung | 3 V |
| Core Count | 1 |
| Gehäuse | 64-LQFP, 10 x 10 mm |
| Montageart | SMD |
| USB Support | USB device |
| Connectivity | FlexIO, I2C, IrDA, SPI, UART/USART |
| Peripherals | DMA, PWM, watchdog timer |
| Development Tool Support | Keil MDK and Keil Studio |
| Shipping Format | Tray |
| Standard Package Quantity | 160 units |
| Moisture Sensitivity Level | MSL 3, 168 hours |
| REACH Status | REACH unaffected |
| ECCN | 3A991A2 |
MKL13Z64VLH4 160 units Pinbelegungsleitfaden
Pinbelegung für MKL13Z64VLH4 (160 units-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MKL13Z64VLH4.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MKL13Z64VLH4 ist geeignet für 6 Anwendungs: USB Portable Data Logger, Industrial Sensor Node, Battery-Powered Instrument, USB Accessory Controller, Compact Control Panel, Portable Measurement Product.
USB Portable Data Logger
The MKL13Z64VLH4 fits a compact USB-connected logger because it combines a 48 MHz Arm Cortex-M0+ core with 64 KB of Flash, 8 KB of SRAM, and USB device support. Its FlexIO, I2C, SPI, UART/USART, DMA, and watchdog resources support sensor acquisition, buffering, and host communication without requiring a larger processor. The 64-LQFP package keeps the controller compact while exposing the full set of mixed-signal and serial connections. Engineering trade-offs include the limited 8 KB SRAM, which requires careful buffering, and the need to verify the exact USB clock, power, and signal-routing requirements in the NXP reference design before PCB release.
Empfohlen
Industrial Sensor Node
The MKL13Z64VLH4 is appropriate for an industrial sensor node that must combine several low-speed sensors with local control and serial backhaul. Its 48 MHz Cortex-M0+ core provides timing for sampling and filtering, while 64 KB of Flash accommodates application firmware and 8 KB of SRAM supports short acquisition buffers. FlexIO, I2C, SPI, UART/USART, DMA, PWM, and the watchdog timer allow sensor, actuator, and communications tasks to be organized efficiently. The 3 V operating supply also fits many embedded industrial architectures. Before deployment, verify analog accuracy, external clock requirements, ESD strategy, and the industrial temperature range in the current manufacturer documentation.
Empfohlen
Battery-Powered Instrument
The MKL13Z64VLH4 supports battery-powered instruments where a 48 MHz control path is useful but energy efficiency is more important than maximum processor performance. The Kinetis KL13 family is positioned as an ultra-low-power MCU family, and this device adds 64 KB of Flash, 8 KB of SRAM, mixed serial interfaces, and USB device capability. FlexIO and DMA can reduce processor involvement during data movement, while the watchdog timer supports recovery from abnormal operation. Actual runtime depends on the selected clock mode, duty cycle, USB activity, analog conversion rate, and peripheral sleep behavior. Prototype the power budget across active, idle, and sleep states instead of relying only on nominal operating frequency.
Empfohlen
USB Accessory Controller
The MKL13Z64VLH4 can serve as the control and interface MCU in a USB accessory that needs local state handling in addition to enumeration and data transfer. Its USB device support directly matches that role, while the 48 MHz Cortex-M0+ core can manage protocol processing, configuration, and user-interface updates. I2C and SPI support common sensors and display or storage devices, and UART/USART provides a path for internal configuration. The 64-LQFP footprint is convenient for boards that need broad mixed-signal connectivity. Design reviews should confirm device-role support, bus-speed configuration, required descriptors, clock tolerance, and whether USB suspend behavior fits the product’s power architecture.
Empfohlen
Compact Control Panel
The MKL13Z64VLH4 is suitable for a compact control panel requiring several interfaces, periodic sensing, local actuation, and a modest embedded codebase. Its FlexIO, I2C, SPI, UART/USART, PWM, DMA, and watchdog resources allow displays, keys, sensors, and actuators to share one controller. The 48 MHz Cortex-M0+ core provides sufficient control bandwidth while the 64 KB Flash and 8 KB SRAM target focused embedded tasks. Use the general-purpose 64-LQFP package when the design needs more external connections than a very small MCU package provides. Layout and firmware planning must account for display refresh timing, bus contention, debounce intervals, and any requirement for firmware updates over USB.
Empfohlen
Portable Measurement Product
The MKL13Z64VLH4 fits portable measurement products that combine analog observation, digital control, data transfer, and low-power operation. NXP describes the device as an ultra-low-power Kinetis KL13 MCU with analog peripherals, USB device support, and a 48 MHz Arm Cortex-M0+ core. Analog inputs can be sampled while DMA transfers data, reducing the processing burden associated with 64 KB of Flash and 8 KB of SRAM. FlexIO and I2C allow expansion for additional converters, while SPI or UART/USART supports external instrumentation. Validate measurement accuracy, reference stability, calibration storage, thermal effects, and USB power behavior on hardware rather than treating peripheral availability as proof of application performance.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MKL13Z64VLH4 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MKL16Z64VLH4 | MKL17Z64VLH4 | MKL33Z64VLH4 |
|---|---|---|---|---|
| Package | 64-LQFP (10x10) | 64-LQFP (10x10) | 64-LQFP (10x10) | 64-LQFP (10x10) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB (64K x 8) | 64 KB | 64 KB | 64 KB |
Wichtigste Unterscheidungsmerkmale
- Documented USB device capability in a compact general-purpose MCU (vs. MKL33Z64VLH4)
- Matches the headline CPU and memory ratings of the closest same-family candidate (vs. MKL16Z64VLH4)
- USB-equipped Kinetis alternative with identical clock and Flash ratings (vs. MKL17Z64VLH4)
Designhinweise
Route USB D+ and D- as a short, controlled-impedance differential pair over a continuous reference plane. Keep the connector, protection devices, and MCU connection compact, minimize vias and stubs, and follow the NXP recommended layout. Confirm the MCU pin assignments and USB transceiver requirements in the current datasheet because peripheral multiplexing and package options determine the final topology.
Build the 3 V rail with low-noise decoupling close to the MCU supply pins and preserve the voltage and current limits defined in the manufacturer datasheet. Verify startup sequencing, external clock requirements, analog-reference stability, and USB bus-powered versus self-powered operation. A scope measurement at the MCU pins is preferable to relying only on measurements at the power-source connector.
Do not treat a shared 64-LQFP outline as proof of unconditional interchangeability. Before replacing MKL13Z64VLH4, compare the complete pin-description table, alternate functions, power pins, clock pins, USB-capable pins, peripheral instance counts, and memory organization. Also review startup code, linker memory definitions, device headers, and low-power transitions so a hardware match does not introduce a firmware mismatch.
Assign the 64-LQFP footprint from the exact manufacturer package drawing and check pin-1 orientation against the PCB library. Maintain soldering-mask and paste-mask clearance for fine-pitch leads, and provide thermal copper around the device while avoiding unintended coupling between sensitive analog inputs and switching or high-current nets. Validate assembly using the manufacturer’s land pattern and assembly guidelines.
Compliance-Informationen
The cross-reference record identifies the exact device as REACH unaffected and lists ECCN 3A991A2. RoHS, AEC-Q100 qualification, lead-free status, halogen-free status, and conflict-minerals compliance require confirmation in the current NXP documentation.