NXP Semiconductors

MKL17Z32VLH4 - 48MHz Cortex-M0+ MCU | NXP Semiconductors

N.º da peça: MKL17Z32VLH4 ✓ Ativo
1.8 V, 2.5 V, and 3.3 V Vdss 64-LQFP (10 x 10 mm) Package 48 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

MKL17Z32VLH4 Visão geral

NXP Semiconductors MKL17Z32VLH4 is an ultra-low-power 32-bit Kinetis KL17 microcontroller featuring an Arm Cortex-M0+ processor, 48 MHz operating frequency, 32 KB Flash memory, and 8 KB SRAM in a 64-LQFP 10 x 10 mm package. It provides 54 general-purpose I/O pins and integrated I2C, SPI, UART/USART, I2S, FlexIO, PWM, DMA, and watchdog peripherals for compact embedded control systems.

A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals onto one package. The Kinetis KL1x family belongs to the Arm Cortex-M0+ microcontroller hierarchy and targets general-purpose, ultra-low-power designs. Its architecture supports efficient event-driven control while providing a familiar embedded software ecosystem for Arm-based development.

Key device features include 32 KB of Flash for application code, 8 KB of SRAM for working data, and 54 available I/O pins. The integrated communication resources include I2C, SPI, UART/USART, and I2S, while FlexIO expands programmable serial-interface capability. PWM channels, DMA transfers, and a watchdog timer support efficient peripheral operation and system monitoring. The operating range includes 1.8 V, 2.5 V, and 3.3 V supply options.

The Cortex-M0+ core combines a compact instruction set with efficient event-driven processing, making the MKL17Z32VLH4 appropriate for battery-powered sensors, portable instruments, and low-power control nodes. DMA reduces the CPU burden for serial transfers and data movement, while the watchdog contributes to recovery from unexpected faults. Program development is supported by Arm Keil and Keil Studio, as identified for this device by Arm Keil.

Typical uses include low-power sensor hubs, industrial condition-monitoring nodes, connected meters, small motor-control modules, and compact consumer accessories. Serial interfaces allow the MCU to connect sensors, displays, storage devices, and host processors. FlexIO can implement additional communication formats when fixed-function peripherals do not satisfy the interface requirement. The 54 I/O pins provide substantial connectivity for LEDs, buttons, sensors, and discrete actuators in a 10 x 10 mm footprint.

A primary design consideration is the difference between Flash and SRAM capacity. The 32 KB Flash must accommodate the boot code, application, configuration data, and firmware update requirements, while the 8 KB SRAM constrains simultaneous buffered data. Use the manufacturer pin-description table when assigning the 64 package pins and confirm the selected board configuration against the exact MKL17Z32VLH4 ordering code. Low-power operation also requires careful peripheral disablement, clock selection, and retention-policy configuration.

Alternativas drop-in para MKL17Z32VLH4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MKL17Z32VLH4 (mesmo formato e footprint) — diferindo em Product Type, SRAM, Mounting Type, Flash Memory, Processor Architecture.

NXP Semiconductors
Product Type: 32-bit Arm Cortex-M0+ microcontroller
SRAM: 4 KB
Mounting Type: Surface Mount
Comparar com MKL17Z32VLH4 →
NXP Semiconductors
Product Type: 32-bit general-purpose ultra-low-power microcontroller
SRAM: 16 KB
Mounting Type: Surface mount
Comparar com MKL17Z32VLH4 →

MKL14Z32VLH4

✅ Drop-In
📦 64-LQFP (10 x 10 mm)
Flash remains 32 KB and the Cortex-M0+ family remains unchanged, a 0% memory difference; clock and peripheral differences require NXP verification

📋 Alternativa de referência (fora do catálogo)

MKL15Z32VLH4

✅ Drop-In
📦 64-LQFP (10 x 10 mm)
Flash remains 32 KB and the Cortex-M0+ family remains unchanged, a 0% memory difference; clock and peripheral differences require NXP verification

📋 Alternativa de referência (fora do catálogo)

MKL17Z64VLH4

✅ Drop-In
NXP Semiconductors
📦 64-LQFP (10 x 10 mm)
32-bit general-purpose ultra-low-power microcontroller · Kinetis KL17 · Arm Cortex-M0+ · 32-bit RISC · 48 MHz · 64 KB · 64K x 8 bits · 16 KB

Consulte o preço

Ver ficha técnica →

MKL17Z32VLH4 Classificações máximas e características elétricas

Product Type 32-bit ultra-low-power microcontroller
Series Kinetis KL17
Processor Core Arm Cortex-M0+
Core Bit Width 32 bit
Maximum CPU Frequency 48 MHz
Flash Memory 32 KB (32K x 8)
SRAM 8 KB
Program Memory Type Flash
Number of I/O Pins 54 pins
Encapsulamento 64-LQFP (10 x 10 mm)
Supply Voltage Options 1.8 V, 2.5 V, and 3.3 V
Serial Interfaces I2C, SPI, UART/USART, and I2S
Programmable Interface FlexIO
Peripheral Support DMA, PWM, and watchdog timer
Tipo de montagem Surface-mount LQFP
Product Status Active
Toolchain Support Arm Keil and Keil Studio

Guia de Configuração de Pinos do MKL17Z32VLH4 64-lqfp (10 x 10 mm)

Configuração de pinos para MKL17Z32VLH4 (pacote 64-lqfp (10 x 10 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 64-lqfp (10 x 10 mm) para MKL17Z32VLH4

Nenhum dado detalhado de pinagem disponível para MKL17Z32VLH4.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MKL17Z32VLH4 é adequado para 6 aplicaçãos: Industrial Sensor Hub, Battery-Powered Metering Node, Connected Control Panel, Portable Diagnostic Instrument, Small Motor-Control Module, Smart Home Sensor Node.

🏭

Industrial Sensor Hub

The MKL17Z32VLH4 fits an industrial sensor hub that must collect readings from multiple sensors and forward them through a serial link. Its 48 MHz Arm Cortex-M0+ core provides enough processing capacity for filtering and protocol handling, while 8 KB of SRAM supports short-term buffering. I2C and SPI accommodate common sensor types, UART/USART provides a host connection, and DMA can move serial data with less processor intervention. The 54 I/O pins allow status indicators, local switches, and alarm outputs to share the same controller.

⚡

Battery-Powered Metering Node

The MKL17Z32VLH4 is appropriate for a battery-powered metering node that periodically measures a physical quantity and communicates the result through a low-power serial interface. Its ultra-low-power Kinetis KL1x positioning supports efficient duty-cycled operation, while the 48 MHz processor can perform calculations between measurement events. The 32 KB Flash stores application and configuration code, and the watchdog timer supports recovery after transient faults. Designers should disable unused peripherals, select the lowest acceptable clock configuration, and size SRAM for the longest required active interval.

🧩

Connected Control Panel

The MKL17Z32VLH4 can serve as the controller for a compact connected control panel containing buttons, indicators, displays, and one or more communication links. Its 54 I/O pins provide substantial interface capacity, while PWM can control indicator brightness or simple actuator functions. I2C is suitable for sensor and display controllers, SPI supports higher-speed peripherals, and UART/USART handles external modules. FlexIO adds programmable serial-interface flexibility when the fixed communication peripherals do not match a product-specific protocol.

💊

Portable Diagnostic Instrument

The MKL17Z32VLH4 fits a portable diagnostic instrument that combines sensor acquisition, local control, and removable-media or host communication. Its 48 MHz Cortex-M0+ core supports responsive sampling and data processing, while DMA reduces processor involvement during I2S, SPI, or UART transfers. I2S is particularly relevant for coded-audio sensors, and the 8 KB SRAM can support short processing buffers. Firmware should define a low-power idle mode, use watchdog reset recovery, and avoid exceeding the memory limits when diagnostic logs and firmware-update resources are included.

🔧

Small Motor-Control Module

The MKL17Z32VLH4 can control a compact motor or actuator module that uses PWM for speed or position adjustment and requires a communications link for commands. Its PWM peripherals, DMA capability, and 54 I/O pins support encoder inputs, control signals, and status feedback. UART/USART can connect to a higher-level controller, while I2C or SPI can connect position sensors. Because 8 KB of SRAM is limited for complex motion control, the application should use interrupt- and DMA-driven data movement rather than large blocking buffers.

🧩

Smart Home Sensor Node

The MKL17Z32VLH4 suits a smart-home sensor node that combines environmental sensing, local control, and network-interface communication. I2C and SPI support environmental sensors and storage, while UART/USART can connect a wireless module. The ultra-low-power family positioning is useful for battery installations because the processor can spend most of its time idle between sensor samples. FlexIO provides additional programmable interface options, and the watchdog timer improves resilience after communication interruptions. Firmware should wake peripherals selectively and preserve configuration only when the application needs it.

What is the MKL17Z32VLH4 microcontroller?
The MKL17Z32VLH4 is an active NXP Kinetis KL17 ultra-low-power microcontroller built around a 32-bit Arm Cortex-M0+ processor. According to the NXP product information and distributor listings, it operates at up to 48 MHz, provides 32 KB of Flash and 8 KB of SRAM, and uses a 64-LQFP package measuring 10 x 10 mm. Its 54 I/O pins and integrated serial interfaces make it suitable for embedded control, sensing, and communications designs.
What are the key specifications of MKL17Z32VLH4?
The MKL17Z32VLH4 combines a 48 MHz Arm Cortex-M0+ core, 32 KB of Flash, 8 KB of SRAM, and 54 I/O pins in a 64-LQFP package. NXP lists I2C, SPI, UART/USART, I2S, FlexIO, DMA, PWM, and watchdog peripherals. The device also supports 1.8 V, 2.5 V, and 3.3 V supply configurations, giving designers a compact platform for low-power industrial, sensor, metering, and portable applications.
Where can I download the MKL17Z32VLH4 datasheet PDF?
The official MKL17Z32VLH4 datasheet can be accessed from the NXP product-information page, which identifies the device as active and links to its technical documentation. NXP is the authoritative source for pin assignments, electrical limits, memory organization, and peripheral behavior. Use the manufacturer datasheet alongside the product page, and select the documentation for the exact MKL17Z32VLH4 ordering code rather than relying on a generic Kinetis KL17 document.
Where can I find the MKL17Z32VLH4 pinout?
The MKL17Z32VLH4 pinout is published in the NXP manufacturer documentation for the 64-LQFP package. The package contains 64 physical pins, with 54 described as general-purpose I/O in the device listing. Use the NXP pin-description table to map power, ground, reset, debug, clock, and multiplexed peripheral functions before assigning PCB nets. Do not infer the complete 64-pin mapping from the I/O count alone.
Which development tools support MKL17Z32VLH4?
Arm Keil and Keil Studio support the MKL17Z32VLH4, as indicated by the Arm Keil device page for this exact part. These tools provide an Arm Cortex-M0+ development environment, source editing, debugging, flashing, and configuration support. Confirm the installed device pack and board definitions before beginning a new project, particularly when configuring clock sources, low-power behavior, and the 64-LQFP footprint.
Can MKL17Z32VLH4 be used for low-power sensor applications?
Yes, the MKL17Z32VLH4 is suitable for low-power sensor applications because it belongs to NXP's ultra-low-power Kinetis KL1x family and includes DMA, serial interfaces, and a watchdog timer. Its 48 MHz Cortex-M0+ core can process data while unused peripherals are disabled. Low-power effectiveness still depends on the firmware configuration, clock selection, sensor duty cycle, and whether the SRAM and processor remain active during idle periods.
Where can I buy MKL17Z32VLH4 and what is its lead time?
Use the Request a Quote form on this page to request current MKL17Z32VLH4 availability, unit pricing, minimum order quantity, and production lead time. NXP identifies the device as active, while channel inventory can change by package, quantity, and regional logistics. Quote requests should specify the exact MKL17Z32VLH4 MPN, required quantity, and delivery destination so procurement can confirm the current supply position.
What is the price of MKL17Z32VLH4?
The current MKL17Z32VLH4 price depends on order quantity, purchasing volume, and supply status. Submit a Request a Quote through this page for the unit price and quantity breaks applicable to your order. NXP lists MKL17Z32VLH4 as active, and the part is offered in a 64-LQFP 10 x 10 mm package. The quotation process avoids publishing a price that may become stale before procurement places the order.
Is MKL17Z32VLH4 in stock?
Current stock should be confirmed through the Request a Quote form on this page. NXP lists MKL17Z32VLH4 as active, and distributor search results identify the exact device in the 64-LQFP package, but searchable inventory does not guarantee immediately available stock. Include the required quantity and ship-to region in the request so procurement can confirm allocation, packaged inventory, and the expected lead time.
What is the difference between MKL17Z32VLH4 and MKL15Z32VLH4?
Both MKL17Z32VLH4 and MKL15Z32VLH4 are listed in a direct KL1-family comparison and share the 32 KB Flash and 64-LQFP ordering format, but their peripheral sets and clock configurations must be checked before substitution. The MKL17Z32VLH4 is specified at 48 MHz, whereas the exact MKL15Z32VLH4 operating details should be confirmed from its NXP documentation. Review pin multiplexing, clocking, power, and firmware requirements before treating them as interchangeable.
When should I choose MKL17Z32VLH4 over MKL14Z32VLH4?
Choose the MKL17Z32VLH4 when the design requires the KL17 feature set, 48 MHz processing, and the exact peripheral configuration represented by that ordering code. The MKL14Z32VLH4 appears in a direct comparison with the target and retains 32 KB Flash, making it a candidate for family-level evaluation. Final selection should follow an NXP migration review covering pin multiplexing, peripheral availability, clock limits, memory behavior, and application firmware.
Is MKL17Z32VLH4 suitable for an industrial sensor node?
The MKL17Z32VLH4 is suitable for many industrial sensor nodes that need low-power operation, multiple serial interfaces, and local data processing. Its 48 MHz Cortex-M0+ core, DMA, watchdog timer, 54 I/O pins, and 32 KB Flash support sensor acquisition, communication, and control. For harsh industrial environments, evaluate the wider Kinetis KL1x family or an automotive-qualified MCU when extended temperature, transient immunity, or formal product qualification is required.
What is the best drop-in replacement for MKL17Z32VLH4?
The best drop-in replacement must retain the 64-LQFP footprint, pin multiplexing, 48 MHz operating capability, memory organization, and required peripherals. MKL14Z32VLH4, MKL15Z32VLH4, and MKL17Z64VLH4 are useful family candidates identified by the cross-reference search, but none should be released as a drop-in replacement without an NXP datasheet and application-level comparison. This page lists them as drop-in candidates for evaluation, not as unconditional substitutions.
Can MKL17Z64VLH4 replace MKL17Z32VLH4?
MKL17Z64VLH4 can serve as a family-level replacement candidate because it is another 64-LQFP KL17 device and increases Flash capacity from 32 KB to 64 KB, a 100% increase. That difference is beneficial only when the application can tolerate the change, and it may alter memory organization, firmware layout, or peripheral behavior. Confirm the complete pinout, electrical conditions, peripheral configuration, and software implications before approving it as a drop-in substitution.
What is the best NXP Kinetis alternative for MKL17Z32VLH4?
The MKL17Z64VLH4 is the closest NXP candidate identified for increasing available Flash without leaving the KL17 family, while MKL14Z32VLH4 and MKL15Z32VLH4 provide alternatives when their peripheral configurations meet the design requirements. NXP states that the KL1x family supports migration among compatible Kinetis families, but that does not remove the need for a package, pin-function, clock, and firmware review. Use the exact NXP documentation for the candidate before release.

Dados de referência de engenharia para MKL17Z32VLH4 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the MKL17Z32VLH4 when the design specifically requires a 48 MHz Arm Cortex-M0+ processor, 32 KB of Flash, 8 KB of SRAM, 54 I/O pins, and the listed I2C, SPI, UART/USART, I2S, and FlexIO resources in a 64-LQFP package. It is particularly suitable for low-power sensing, metering, portable instruments, and compact control modules. Consider MKL17Z64VLH4 when additional Flash capacity is more valuable than matching the target's 32 KB allocation, but verify memory organization and firmware effects. Evaluate MKL14Z32VLH4 and MKL15Z32VLH4 only after comparing the exact clock, peripheral, pin-multiplexing, and power requirements in NXP documentation. Because family compatibility does not automatically guarantee identical behavior, validate any candidate with the complete pin table, electrical limits, reference manual, and production firmware.

Comparação com alternativas

Parâmetro Este produto MKL14Z32VLH4 MKL15Z32VLH4 MKL17Z64VLH4
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm)
Product Family Kinetis KL17 Kinetis KL14 Kinetis KL15 Kinetis KL17
Processor Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Flash Memory 32 KB 32 KB 32 KB 64 KB, 100% more than target

Principais diferenciais

  • Higher clock rating within the compared NXP candidates (vs MKL14Z32VLH4)
  • Retains 32 KB Flash without the KL17 capacity increase (vs MKL17Z64VLH4)
  • Complete high-speed serial interface set in the target ordering code (vs MKL15Z32VLH4)
  • 54 general-purpose I/O in a compact surface-mount package (vs MKL17Z64VLH4)

Notas de projeto

Design the MKL17Z32VLH4 power rails for the selected 1.8 V, 2.5 V, or 3.3 V operating configuration. Place the regulator output and every decoupling capacitor directly beside the corresponding power and ground pins, with the shortest possible return path. Separate analog and digital supply branches where the application permits it, and route return currents away from I2S, SPI, and sensor input signals. This prevents current pulses from digital peripherals from producing voltage disturbances in sensitive analog circuitry.

Use the NXP 64-LQFP land pattern and pin-description table when defining the PCB footprint and net assignments. Keep the MCU, decoupling capacitors, crystal components, and reset network close to their associated pins. Avoid routing high-speed or switching-node signals beneath the device where possible, and provide a continuous ground reference wherever possible. The 54 I/O pins provide flexibility, but alternate-function selection must be reviewed against the final board schematic rather than assigned by pin number alone.

Do not assume that every pin is available as a general-purpose I/O even though the device has 54 I/O pins. Reset, debug, clock, power, and ground functions occupy additional package pins and several I/O-capable pins can be multiplexed. Before schematic release, compare the selected peripheral functions with the NXP pin table, verify the 3.3 V-tolerant status of externally connected signals, and confirm that boot configuration pins are not pulled incorrectly during reset.

Plan firmware and memory use before committing to the MKL17Z32VLH4. The device has 32 KB of Flash for code and 8 KB of SRAM for runtime data, so application code, bootloader, configuration data, and update buffers must share the Flash allocation. Use DMA for high-rate serial traffic instead of duplicating large buffers in SRAM, and include the watchdog reset path in the system recovery design. This prevents an otherwise compatible hardware design from failing because of runtime resource exhaustion.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The verified manufacturer and distributor information identifies the device as active but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Dados verificados em: 2026-11-19 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MKL17Z32VLH4 datasheet MKL17Z32VLH4 pinout MKL17Z32VLH4 datasheet pdf NXP MKL17Z32VLH4 MKL17Z32VLH4 equivalent MKL17Z32VLH4 replacement MKL17Z32VLH4 cross reference MKL17Z32VLH4 price MKL17Z32VLH4 stock MKL17Z32VLH4 48MHz Cortex-M0+ MKL17Z32VLH4 64-LQFP pinout MKL17Z32VLH4 low power sensor MKL17Z32VLH4 vs MKL17Z64VLH4 MKL17Z32VLH4 Arm Keil

Componentes & termos relacionados

NXP Semiconductors MKL17Z32VLH4 MKL14Z32VLH4 MKL15Z32VLH4 MKL17Z64VLH4 Kinetis KL17 Kinetis KL1x Arm Cortex-M0+ 32-bit microcontroller Arm Cortex-M microcontroller embedded microcontroller low-power MCU ultra-low-power MCU 32 KB Flash 8 KB SRAM 48 MHz 64-LQFP LQFP package surface-mount package I2C SPI UART/USART I2S FlexIO DMA PWM watchdog timer Arm Keil Keil Studio
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ