MKL17Z32VLH4 - 48MHz Cortex-M0+ MCU | NXP Semiconductors
부품 번호: MKL17Z32VLH4 ✓ 활성MKL17Z32VLH4 개요
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals onto one package. The Kinetis KL1x family belongs to the Arm Cortex-M0+ microcontroller hierarchy and targets general-purpose, ultra-low-power designs. Its architecture supports efficient event-driven control while providing a familiar embedded software ecosystem for Arm-based development.
Key device features include 32 KB of Flash for application code, 8 KB of SRAM for working data, and 54 available I/O pins. The integrated communication resources include I2C, SPI, UART/USART, and I2S, while FlexIO expands programmable serial-interface capability. PWM channels, DMA transfers, and a watchdog timer support efficient peripheral operation and system monitoring. The operating range includes 1.8 V, 2.5 V, and 3.3 V supply options.
The Cortex-M0+ core combines a compact instruction set with efficient event-driven processing, making the MKL17Z32VLH4 appropriate for battery-powered sensors, portable instruments, and low-power control nodes. DMA reduces the CPU burden for serial transfers and data movement, while the watchdog contributes to recovery from unexpected faults. Program development is supported by Arm Keil and Keil Studio, as identified for this device by Arm Keil.
Typical uses include low-power sensor hubs, industrial condition-monitoring nodes, connected meters, small motor-control modules, and compact consumer accessories. Serial interfaces allow the MCU to connect sensors, displays, storage devices, and host processors. FlexIO can implement additional communication formats when fixed-function peripherals do not satisfy the interface requirement. The 54 I/O pins provide substantial connectivity for LEDs, buttons, sensors, and discrete actuators in a 10 x 10 mm footprint.
A primary design consideration is the difference between Flash and SRAM capacity. The 32 KB Flash must accommodate the boot code, application, configuration data, and firmware update requirements, while the 8 KB SRAM constrains simultaneous buffered data. Use the manufacturer pin-description table when assigning the 64 package pins and confirm the selected board configuration against the exact MKL17Z32VLH4 ordering code. Low-power operation also requires careful peripheral disablement, clock selection, and retention-policy configuration.
드롭인 대체품: MKL17Z32VLH4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MKL17Z32VLH4 (동일 폼 팩터 및 풋프린트) — 차이점: Product Type, SRAM, Mounting Type, Flash Memory, Processor Architecture.
MKL14Z32VLH4
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MKL15Z32VLH4
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MKL17Z64VLH4
✅ 드롭인가격 문의
데이터시트 보기 →MKL17Z32VLH4 최대 정격 & 전기적 특성
| Product Type | 32-bit ultra-low-power microcontroller |
| Series | Kinetis KL17 |
| Processor Core | Arm Cortex-M0+ |
| Core Bit Width | 32 bit |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 32 KB (32K x 8) |
| SRAM | 8 KB |
| Program Memory Type | Flash |
| Number of I/O Pins | 54 pins |
| 패키지 | 64-LQFP (10 x 10 mm) |
| Supply Voltage Options | 1.8 V, 2.5 V, and 3.3 V |
| Serial Interfaces | I2C, SPI, UART/USART, and I2S |
| Programmable Interface | FlexIO |
| Peripheral Support | DMA, PWM, and watchdog timer |
| 실장 유형 | Surface-mount LQFP |
| Product Status | Active |
| Toolchain Support | Arm Keil and Keil Studio |
MKL17Z32VLH4 64-lqfp (10 x 10 mm) 핀 구성 가이드
MKL17Z32VLH4(64-lqfp (10 x 10 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MKL17Z32VLH4.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MKL17Z32VLH4 적합 용도: 6 애플리케이션s: Industrial Sensor Hub, Battery-Powered Metering Node, Connected Control Panel, Portable Diagnostic Instrument, Small Motor-Control Module, Smart Home Sensor Node.
Industrial Sensor Hub
The MKL17Z32VLH4 fits an industrial sensor hub that must collect readings from multiple sensors and forward them through a serial link. Its 48 MHz Arm Cortex-M0+ core provides enough processing capacity for filtering and protocol handling, while 8 KB of SRAM supports short-term buffering. I2C and SPI accommodate common sensor types, UART/USART provides a host connection, and DMA can move serial data with less processor intervention. The 54 I/O pins allow status indicators, local switches, and alarm outputs to share the same controller.
추천
Battery-Powered Metering Node
The MKL17Z32VLH4 is appropriate for a battery-powered metering node that periodically measures a physical quantity and communicates the result through a low-power serial interface. Its ultra-low-power Kinetis KL1x positioning supports efficient duty-cycled operation, while the 48 MHz processor can perform calculations between measurement events. The 32 KB Flash stores application and configuration code, and the watchdog timer supports recovery after transient faults. Designers should disable unused peripherals, select the lowest acceptable clock configuration, and size SRAM for the longest required active interval.
추천
Connected Control Panel
The MKL17Z32VLH4 can serve as the controller for a compact connected control panel containing buttons, indicators, displays, and one or more communication links. Its 54 I/O pins provide substantial interface capacity, while PWM can control indicator brightness or simple actuator functions. I2C is suitable for sensor and display controllers, SPI supports higher-speed peripherals, and UART/USART handles external modules. FlexIO adds programmable serial-interface flexibility when the fixed communication peripherals do not match a product-specific protocol.
추천
Portable Diagnostic Instrument
The MKL17Z32VLH4 fits a portable diagnostic instrument that combines sensor acquisition, local control, and removable-media or host communication. Its 48 MHz Cortex-M0+ core supports responsive sampling and data processing, while DMA reduces processor involvement during I2S, SPI, or UART transfers. I2S is particularly relevant for coded-audio sensors, and the 8 KB SRAM can support short processing buffers. Firmware should define a low-power idle mode, use watchdog reset recovery, and avoid exceeding the memory limits when diagnostic logs and firmware-update resources are included.
추천
Small Motor-Control Module
The MKL17Z32VLH4 can control a compact motor or actuator module that uses PWM for speed or position adjustment and requires a communications link for commands. Its PWM peripherals, DMA capability, and 54 I/O pins support encoder inputs, control signals, and status feedback. UART/USART can connect to a higher-level controller, while I2C or SPI can connect position sensors. Because 8 KB of SRAM is limited for complex motion control, the application should use interrupt- and DMA-driven data movement rather than large blocking buffers.
추천
Smart Home Sensor Node
The MKL17Z32VLH4 suits a smart-home sensor node that combines environmental sensing, local control, and network-interface communication. I2C and SPI support environmental sensors and storage, while UART/USART can connect a wireless module. The ultra-low-power family positioning is useful for battery installations because the processor can spend most of its time idle between sensor samples. FlexIO provides additional programmable interface options, and the watchdog timer improves resilience after communication interruptions. Firmware should wake peripherals selectively and preserve configuration only when the application needs it.
추천
추천 제품 요약
엔지니어링 참조 데이터: MKL17Z32VLH4 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MKL14Z32VLH4 | MKL15Z32VLH4 | MKL17Z64VLH4 |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) |
| Product Family | Kinetis KL17 | Kinetis KL14 | Kinetis KL15 | Kinetis KL17 |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Flash Memory | 32 KB | 32 KB | 32 KB | 64 KB, 100% more than target |
주요 차별점
- Higher clock rating within the compared NXP candidates (vs MKL14Z32VLH4)
- Retains 32 KB Flash without the KL17 capacity increase (vs MKL17Z64VLH4)
- Complete high-speed serial interface set in the target ordering code (vs MKL15Z32VLH4)
- 54 general-purpose I/O in a compact surface-mount package (vs MKL17Z64VLH4)
설계 노트
Design the MKL17Z32VLH4 power rails for the selected 1.8 V, 2.5 V, or 3.3 V operating configuration. Place the regulator output and every decoupling capacitor directly beside the corresponding power and ground pins, with the shortest possible return path. Separate analog and digital supply branches where the application permits it, and route return currents away from I2S, SPI, and sensor input signals. This prevents current pulses from digital peripherals from producing voltage disturbances in sensitive analog circuitry.
Use the NXP 64-LQFP land pattern and pin-description table when defining the PCB footprint and net assignments. Keep the MCU, decoupling capacitors, crystal components, and reset network close to their associated pins. Avoid routing high-speed or switching-node signals beneath the device where possible, and provide a continuous ground reference wherever possible. The 54 I/O pins provide flexibility, but alternate-function selection must be reviewed against the final board schematic rather than assigned by pin number alone.
Do not assume that every pin is available as a general-purpose I/O even though the device has 54 I/O pins. Reset, debug, clock, power, and ground functions occupy additional package pins and several I/O-capable pins can be multiplexed. Before schematic release, compare the selected peripheral functions with the NXP pin table, verify the 3.3 V-tolerant status of externally connected signals, and confirm that boot configuration pins are not pulled incorrectly during reset.
Plan firmware and memory use before committing to the MKL17Z32VLH4. The device has 32 KB of Flash for code and 8 KB of SRAM for runtime data, so application code, bootloader, configuration data, and update buffers must share the Flash allocation. Use DMA for high-rate serial traffic instead of duplicating large buffers in SRAM, and include the watchdog reset path in the system recovery design. This prevents an otherwise compatible hardware design from failing because of runtime resource exhaustion.
규정 준수 정보
The verified manufacturer and distributor information identifies the device as active but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.