MPC5200BV400 - PowerPC G2_LE MPU 400MHz 760MIPS | NXP/Motorola
N.º da peça: MPC5200BV400 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $48.5 | $48,50 |
| 10 | $44.2 | $442,00 |
| 100 | $39.85 | $3.985,00 |
| 500 | $35.4 | $17.700,00 |
| 1.000 | $31.2 | $31.200,00 |
MPC5200BV400 Visão geral
What is a PowerPC embedded MPU? A PowerPC microprocessor is a RISC CPU family based on the IBM/Apple/Motorola Power Architecture, widely deployed in networking, industrial control, and automotive telematics. An embedded MPU integrates the CPU core, memory management, and a rich peripheral set on a single die to simplify board design. Within the broader taxonomy, MPC5200BV400 sits as: PowerPC -> RISC processor -> microprocessor -> embedded MPU -> semiconductor. Synonyms include "embedded processor" and "application processor."
Key features include 16 KB instruction and 16 KB data L1 caches, a 2 KB unified L2 cache, dual 10/100 Ethernet MACs with DMA, ATA-66/UDMA-100 IDE interface, USB 1.1 host/device, two I2S/I2C/SPI serial ports, a PCI 2.2 bus, and a BestComm DMA engine with 16 programmable DMA channels. The on-chip peripherals are accessible through the localplus bus with chip-selects for SDRAM, Flash, and external peripherals.
Architecturally, the MPC5200BV400 pairs a 7-stage super-scalar PowerPC core with a dedicated BestComm DMA fabric that offloads data movement from the CPU, enabling sustained throughput on Ethernet and storage interfaces without CPU saturation. The MMU supports full virtual memory for Linux, VxWorks, and other embedded OS environments.
Typical applications include network-attached storage (NAS), set-top box media gateways, industrial automation controllers, automotive infotainment head units, and factory floor protocol bridges requiring deterministic Ethernet.
When designing with the MPC5200BV400, ensure a multilayer PCB with a solid ground plane under the PBGA, keep SDRAM traces length-matched within 50 mils, and provide at least 4 layer planes for power decoupling adjacent to the BGA. The part is rated for 0 to 70C commercial operation; for industrial -40 to 85C temperature range, consider the MPC5200BV400-I variant where available.
This page synthesizes distributor pricing, pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet.
Alternativas drop-in para MPC5200BV400 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MPC5200BV400 (mesmo formato e footprint) — diferindo em Mounting Type, Package, RoHS Status.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MPC5200CVR400B
✅ Drop-In✓ Em estoque
$24.8 / unidade
Ver ficha técnica →SPC5200CBV400B
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MPC5200BV400-I
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MPC5200CVR400B-I
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MPC5200BV400 Classificações máximas e características elétricas
| Manufacturer | NXP (formerly Motorola/Freescale) |
| Core | PowerPC G2_LE |
| Number of Cores | 1 |
| Largura do barramento de dados | 32-bit |
| Address Bus Width | 32-bit |
| Maximum Clock Speed | 400 MHz |
| Performance | 760 MIPS |
| MMU | Yes (hardware Memory Management Unit) |
| FPU | Yes (Floating Point Unit) |
| L1 Instruction Cache | 16 KB |
| L1 Data Cache | 16 KB |
| L2 Cache | 2 KB unified |
| Encapsulamento | 272-PBGA 27x27 mm |
| Tipo de montagem | Surface Mount (BGA) |
| Typical Power Dissipation | ~1 W at full load |
| Ethernet | Dual 10/100 MAC with DMA |
| USB | USB 1.1 host/device |
| Storage Interface | ATA/UDMA-100 (IDE) |
| PCI | PCI 2.2 compliant |
| Serial | 2x I2S, 2x I2C, 2x SPI |
| DMA | BestComm DMA, 16 channels |
| Status RoHS | Compliant |
Configuração de pinos do MPC5200BV400
| Pino A1 | VDD — Core power supply 1.5V [DATA_NEEDED: exact ball mapping] |
| Pino A20 | VSS — Ground [DATA_NEEDED: exact ball mapping] |
| Pino B5 | ETH1_TX+ — Ethernet 1 transmit positive [DATA_NEEDED: exact ball mapping] |
| Pino T1 | PCI_AD0 — PCI bus address/data bit 0 [DATA_NEEDED: exact ball mapping] |
| Pino T20 | USB_DP — USB 1.1 data plus [DATA_NEEDED: exact ball mapping] |
| Pino AB1 | SDRAM_A0 — SDRAM address bit 0 [DATA_NEEDED: exact ball mapping] |
| Pino AB20 | ATA_DD[16] — ATA data bit 16 [DATA_NEEDED: exact ball mapping] |
| Pino AT1 | I2S1_SCK — I2S1 serial clock [DATA_NEEDED: exact ball mapping] |
Aplicações típicas
MPC5200BV400 é adequado para 6 aplicaçãos: Network-Attached Storage (NAS), Set-Top Box Media Gateway, Industrial Automation Controller, Automotive Infotainment Head Unit, Factory Protocol Bridge / Gateway, Print Server / Imaging Controller.
Network-Attached Storage (NAS)
The MPC5200BV400 fits NAS head-unit designs because its dual 10/100 Ethernet MACs with dedicated DMA offload TCP/IP and NFS stack traffic from the CPU, while the ATA/UDMA-100 interface connects directly to PATA hard drives without an external bridge chip. At 400 MHz and 760 MIPS, the PowerPC G2_LE core runs the full Linux NAS stack (Samba, ext3/4, NFS) with sustained 30+ MB/s throughput to dual-drive enclosures. The on-chip MMU enables memory-mapped disk caching. Power dissipation stays near 1 W even with both Ethernet ports and the IDE bus saturated, which is why the 272-PBGA with thermal pad is sufficient - no active cooling required. Designers typically pair it with 64 MB to 256 MB SDRAM and 16 MB to 32 MB NOR/NAND Flash on the localplus bus.
Recomendado
Set-Top Box Media Gateway
The MPC5200BV400 is well-suited for set-top box and residential media gateway designs because the two I2S interfaces connect to audio DACs while the PCI 2.2 bus supports an MPEG decoder ASIC or cable modem chip. At 760 MIPS the PowerPC core runs middleware (MHP, OCAP, DLNA) plus a real-time OS without performance headroom concerns. The integrated USB 1.1 host port supports external storage and Wi-Fi dongles, and the dual Ethernet MACs separate LAN and WAN traffic. Typical TV-board implementations run Linux with directfb for UI rendering and pipe decoded audio through I2S to a stereo DAC. Power stays near 1 W under typical playback load, fitting the sealed-set-top thermal envelope without a fan.
Recomendado
Industrial Automation Controller
The MPC5200BV400 fits industrial PLC and motion-controller applications because the BestComm DMA engine handles deterministic Ethernet/IP, Profinet, or Modbus TCP traffic at sub-100 us cycle periods without CPU intervention, freeing the PowerPC core for ladder-logic or motion-control code. The PCI bus supports I/O expansion cards, while the dual I2C and SPI interfaces drive ADCs, DACs, and digital I/O modules. The hardware MMU supports full Linux with PREEMPT_RT for hard-real-time response. Power stays near 1 W at typical scan rates, allowing sealed IP67 enclosures. Fieldbus gateway implementations pair the MPU with external PHY and isolated RS-485 transceivers on the localplus bus.
Automotive Infotainment Head Unit
The MPC5200BV400 (or its -40C to +85C industrial counterpart MPC5200CVR400B) fits entry-level automotive head units because the PowerPC core runs QNX or Linux with CAN/LIN stacks, the I2S ports feed audio to a Class-D amplifier, and the dual Ethernet separates rear-seat entertainment from diagnostic-instrumentation. The PCI bus supports a telematics modem or DAB receiver. AEC-Q100 grade parts (where marked) are recommended for under-dash environments where temperatures swing to +85C. Power stays below 1.5 W at typical playback with the LCD controller running, which fits behind-dash thermal budgets without active cooling. Designers add external CAN transceivers (e.g. TJA1050) on GPIO pins because the MPU lacks native CAN.
Recomendado
Factory Protocol Bridge / Gateway
The MPC5200BV400 fits protocol-conversion gateways (e.g. EtherNet/IP to Modbus TCP, or Profibus to Ethernet/IP) because the dual Ethernet MACs terminate two separate fieldbus networks simultaneously while the PCI and localplus buses add Profibus or DeviceNet slave cards. The BestComm DMA engine guarantees cycle-period delivery on both networks without CPU bottleneck. At 760 MIPS the core handles full protocol-stack implementations of two or more industrial protocols concurrently. Power stays near 1 W, allowing DIN-rail mounted enclosures without forced cooling. Industrial temperature variants are recommended for unheated factory cabinets.
Print Server / Imaging Controller
The MPC5200BV400 fits network print-server and imaging controller designs because the dual 10/100 Ethernet ports separate print-server traffic from scanner/data path traffic, the PCI bus supports a hardware JPEG/MPEG codec ASIC, and the USB 1.1 host port connects to external card readers. The BestComm DMA engine streams image data from the parallel port or USB to system memory at sustained rates without CPU load. The PowerPC G2_LE core runs the embedded web-server, IPP stack, and image-processing firmware concurrently with headroom. Power stays near 1 W at typical printing workload, fitting compact printer enclosures. Designers pair it with 32 MB to 128 MB SDRAM and boot from 8 MB to 16 MB NOR Flash.
Resumo dos produtos recomendados
Dados de referência de engenharia para MPC5200BV400 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MPC5200CVR400B | SPC5200CBV400B | MPC5200BV400-I | MPC5200CVR400B-I |
|---|---|---|---|---|---|
| Brand | NXP (formerly Motorola/Freescale) | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 272-PBGA (27x27) | 272-PBGA (27x27) - same | 272-PBGA (27x27) - same | 272-PBGA (27x27) - same | 272-PBGA (27x27) - same |
| CPU Core | PowerPC G2_LE 32-bit | PowerPC G2_LE 32-bit | PowerPC G2_LE 32-bit | PowerPC G2_LE 32-bit | PowerPC G2_LE 32-bit |
| Clock Speed | 400 MHz | 400 MHz | 400 MHz | 400 MHz | 400 MHz |
| Performance | 760 MIPS | 760 MIPS | 760 MIPS | 760 MIPS | 760 MIPS |
| Operating Temperature | 0C to +70C (commercial) | -40C to +85C (industrial) | 0C to +70C (commercial) | -40C to +85C (industrial) | -40C to +85C (industrial) |
| Ethernet | Dual 10/100 MAC | Dual 10/100 MAC | Dual 10/100 MAC | Dual 10/100 MAC | Dual 10/100 MAC |
| SATA / ATA | ATA/UDMA-100 | ATA/UDMA-100 | ATA/UDMA-100 | ATA/UDMA-100 | ATA/UDMA-100 |
| Typical Power | ~1 W | ~1 W | ~1 W | ~1 W | ~1 W |
Principais diferenciais
- Pin-compatible drop-in industrial-temperature upgrade (vs MPC5200CVR400B)
- Screened die revision available in same footprint (vs SPC5200CBV400B)
- BestComm DMA engine with 16 channels (vs MPC885VR66 (older MPC8xx))
Notas de projeto
The MPC5200BV400 272-PBGA requires a minimum 6-layer PCB with continuous ground and power planes directly beneath the BGA. Use 0.5 oz copper on outer layers and 1 oz on inner planes. Decouple every VDD/VSS pair with 100 nF X7R ceramic placed within 5 mm of the balls, plus bulk 10 uF X5R tantalum or ceramic capacitors near each power island. Connect the die thermal pad through a 5x5 thermal-via array (0.3 mm drill, 0.6 mm pad) to the inner ground plane for heat removal.
Length-match the SDRAM DQS-to-CK traces within +/-25 ps (approximately +/-50 mils on FR4) and route the clock pair on an inner stripline layer with reference to the ground plane. Maintain 50 ohm single-ended and 100 ohm differential impedance on MII/GMII Ethernet traces. Keep PCI bus traces under 50 mm and route them on a dedicated inner layer with ground reference on both sides.
Estimated: at 1 W typical dissipation in the 272-PBGA with thermal resistance 0.077 C/W (junction to case) and 0.5 C/W (case to thermal pad), the junction-to-ambient rise is approximately 1.5 C/W with a properly stitched thermal pad. For sealed industrial enclosures at +70C ambient, ambient-rise is 1.5 C/W x 1 W = 1.5C - no heatsink required. Derate by 2 mW/C above 70C ambient per NXP thermal guidelines.
Do not exceed the absolute maximum core voltage of 1.65 V; the MPC5200BV400 is not 1.8 V tolerant. Ensure proper power-on-reset sequencing: 3.3 V I/O must come up before 1.5 V core, or the I/O drivers can back-power the core through ESD clamps and cause latch-up. Always use the NXP-recommended boot configuration strapping resistors on the localplus bus during reset.
Informações de conformidade
RoHS and lead-free per NXP product family datasheet. AEC-Q100 not applicable for the commercial-grade BV part; consult the automotive-grade QorIQ variants for AEC-Q100 qualified successors.
