Texas Instruments

OPA177GS - Precision Low-Noise Op Amp | Texas Instruments

N.º da peça: OPA177GS ✓ Ativo
10 µV maximum Vdss 1.5 mA typical Id 8-pin SOIC Package
MOQ: 1 |

OPA177GS Visão geral

Texas Instruments OPA177GS is a single-circuit precision bipolar operational amplifier with a 600 kHz gain-bandwidth product, 10 µV maximum offset voltage, and 0.1 µV/°C maximum offset drift, housed in an 8-pin SOIC package. It combines low signal noise with high open-loop gain and a low 1.5 mA typical quiescent current, making it suitable for precision instrumentation, data acquisition, and low-level signal conditioning.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. Precision operational amplifiers add low offset, low drift, high gain, and controlled noise to that basic function. The OPA177 belongs to the bipolar operational-amplifier family within the broader voltage-feedback amplifier and analog signal-processing categories, where accurate DC amplification is required without the periodic noise artifacts associated with chopper-stabilized amplifiers.

The main advantages of the OPA177GS are its low 10 µV maximum input offset voltage, 0.1 µV/°C maximum drift, 130 dB minimum open-loop gain, and 600 kHz gain-bandwidth product. Its 1.5 mA typical quiescent current supports low-power instrumentation, while the bipolar input architecture provides continuous signal transfer without the low-frequency chopping spikes found in some precision amplifiers. These characteristics allow small sensor outputs and measurement errors to be amplified without introducing excessive DC error.

OPA177 performance depends on maintaining high open-loop gain around the operating signal and keeping input-offset errors small relative to the sensed voltage. The manufacturer identifies the device as a low-noise bipolar precision amplifier and an effective alternative to chopper-stabilized products. Its signal-integrity advantage is particularly useful when low-frequency noise, sudden output disturbances, restricted common-mode range, or external storage capacitors would be undesirable in the measurement path.

Typical uses include precision instrumentation, bridge and transducer signal conditioning, laboratory measurement systems, low-level current sensing, and high-resolution data-acquisition front ends. In each case, the amplifier can sit close to the sensor to minimize interference pickup before the signal is amplified. The device is also appropriate for buffering applications where input bias current and DC accuracy are more important than wide bandwidth.

PCB layout is critical because thermoelectric voltages at dissimilar-metal connections can degrade offset and drift performance. Keep input traces short, avoid current paths through input-node copper, use symmetric routing, and establish a quiet ground reference. For sensitive measurements, use clean supplies, stable reference components, and decoupling placed close to the supply pins rather than relying on long supply traces.

This product page combines the manufacturer ordering information, package identification, verified parametric highlights, legacy cross-reference results, and application-specific engineering guidance. It also distinguishes true same-footprint alternatives from related amplifier options and highlights the layout practices needed to preserve the OPA177GS low-offset, low-drift performance in a completed circuit.

Alternativas drop-in para OPA177GS — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com OPA177GS (mesmo formato e footprint) — diferindo em Input Offset Voltage, Package, Amplifier Type, Input Bias Current, Open-Loop Gain.

Analog Devices
Input Offset Voltage: 60 µV (max)
Package: 8-SOIC
Amplifier Type: General Purpose
Comparar com OPA177GS →
Analog Devices
Input Offset Voltage: 25 µV max
Package: 8-SOIC (0.154", 3.90mm Width)
Amplifier Type: General Purpose
Comparar com OPA177GS →

OPA177UA

✅ Drop-In ⚠️ Especificações não verificadas
📦 8-pin SOIC
Same OPA177 precision-amplifier family and 8-SOIC footprint, but the UA ordering suffix may specify a different accuracy grade or operating-temperature classification.

📋 Alternativa de referência (fora do catálogo)

OP177GSZ

✅ Drop-In
Analog Devices
📦 8-pin SOIC
General Purpose · 1 · Single-ended · 0.3 V/µs · 600 kHz · 60 µV (max) · 2.8 nA (max) · ±3 V to ±18 V

Consulte o preço

Ver ficha técnica →

OP177GSZ

✅ Drop-In
Analog Devices
📦 8-pin SOIC
General Purpose · 1 · Single-ended · 0.3 V/µs · 600 kHz · 60 µV (max) · 2.8 nA (max) · ±3 V to ±18 V

Consulte o preço

Ver ficha técnica →

OP07CSZ

✅ Drop-In
📦 8-pin SOIC
Same 8-SOIC precision-amplifier footprint, but bandwidth and DC-error ratings differ from OPA177GS and require circuit-level verification.

📋 Alternativa de referência (fora do catálogo)

OPA177GS Classificações máximas e características elétricas

Amplifier Type Single-circuit precision bipolar operational amplifier
Number of Channels 1 channel
Gain-Bandwidth Product 600 kHz
Input Offset Voltage 10 µV maximum
Input Offset Drift 0.1 µV/°C maximum
Open-Loop Gain 130 dB minimum
Corrente de repouso 1.5 mA typical
Encapsulamento 8-pin SOIC
Tipo de montagem Surface mount
Status RoHS Compliant
MSL Level 3, 260°C, 168 hours

Configuração de pinos do OPA177GS

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pino 1 OFFSET NULL — Offset-voltage null input
Pino 2 IN- — Inverting input
Pino 3 IN+ — Non-inverting input
Pino 4 V- — Negative supply connection
Pino 5 OFFSET NULL — Offset-voltage null input
Pino 6 OUT — Amplifier output
Pino 7 V+ — Positive supply connection
Pino 8 NC — Not connected

Aplicações típicas

OPA177GS é adequado para 6 aplicaçãos: Precision Data-Acquisition Front Ends, Bridge and Transducer Signal Conditioning, Low-Level Current Measurement, Laboratory Buffering and Gain Stages, High-Resolution Analog Signal Conditioning, Precision Control and Measurement Loops.

📊

Precision Data-Acquisition Front Ends

The OPA177GS fits low-level sensor and laboratory acquisition chains because its 10 µV maximum offset voltage and 0.1 µV/°C maximum drift limit DC error relative to small measured signals. A 600 kHz gain-bandwidth product provides useful bandwidth for low-frequency laboratory channels without requiring a high-speed amplifier. Place the device close to the source, use short input traces, and preserve a symmetrical thermal layout. The 1.5 mA typical quiescent current also helps limit self-heating when several precision channels are packed into an instrument.

🏭

Bridge and Transducer Signal Conditioning

OPA177GS is appropriate for bridge outputs and low-level transducers where the useful signal is much smaller than the supply voltage. Its 130 dB minimum open-loop gain supports accurate amplification in a feedback stage, while the 0.1 µV/°C maximum drift helps stabilize the measurement as ambient temperature changes. Differential-input layouts should keep both amplifier inputs on similar copper and thermal paths to reject temperature gradients and thermoelectric voltages. The design must also provide input filtering that avoids excessive differential noise amplification.

⚡

Low-Level Current Measurement

OPA177GS can amplify the small voltage produced by a current-sensing element when DC accuracy is more important than wide bandwidth. The 600 kHz gain-bandwidth product covers many control, meter, and laboratory current-measurement channels, while low offset and drift reduce error near zero current. Place the amplifier adjacent to the sense element to minimize pickup and use a Kelvin connection where practical. Verify that the selected sense resistor, amplifier gain, and common-mode operating range remain valid over the measured current and supply range.

🔧

Laboratory Buffering and Gain Stages

OPA177GS provides a straightforward voltage buffer or fixed-gain stage for laboratory instruments where continuous low-noise behavior is preferred over the very low offset of a chopper-stabilized amplifier. The 1.5 mA typical quiescent current is suitable for portable and multi-channel bench equipment, and the bipolar architecture avoids characteristic low-frequency chopping disturbances. Use clean references, stable feedback resistors, and supply bypassing close to the device. Keep the feedback loop compact and avoid routing output currents close to input nodes.

📈

High-Resolution Analog Signal Conditioning

OPA177GS is suited to conditioning signals for high-resolution converters when converter input accuracy is limited by amplifier offset, drift, or noise. The low 10 µV maximum offset, 0.1 µV/°C maximum drift, and 600 kHz bandwidth provide a practical balance between DC precision and usable signal speed. The amplifier should drive the converter through an appropriate RC isolation network, with resistance and capacitance selected to suppress sampling transients without adding excessive noise. Confirm the converter’s input range and settling requirements during system validation.

🎛️

Precision Control and Measurement Loops

OPA177GS can serve as a feedback amplifier in slow industrial or laboratory control loops where high DC gain and predictable thermal behavior are valuable. Its 130 dB minimum open-loop gain and low offset drift support accurate setpoint tracking, while 600 kHz bandwidth is adequate for many low-bandwidth loops. Compensation must be checked with the actual sensor, cables, and load because added poles can reduce phase margin. Use a grounded, low-impedance reference and route high-current outputs away from sensitive measurement nodes.

What are the key specifications of OPA177GS that engineers should know?
The OPA177GS is a single-channel precision bipolar operational amplifier with a 600 kHz gain-bandwidth product, 10 µV maximum offset voltage, 0.1 µV/°C maximum offset drift, 130 dB minimum open-loop gain, and 1.5 mA typical quiescent current. According to the Texas Instruments manufacturer datasheet, its low noise and low drift make it suitable for instrumentation and data-acquisition circuits where DC accuracy is more important than high bandwidth.
Where can I download the OPA177GS datasheet PDF?
The OPA177GS datasheet PDF is available from the Texas Instruments product page and the manufacturer's direct literature link. The manufacturer datasheet is the authoritative source for electrical characteristics, pin assignments, ordering information, packaging, and recommended application circuits. Use the OPA177GS-specific orderable-addendum information when confirming suffix, temperature range, and shipping configuration.
Where can I find the OPA177GS pinout?
The OPA177GS pinout is shown in the pin-configuration section of the Texas Instruments OPA177 manufacturer datasheet. The device is an 8-pin SOIC with a standard single operational-amplifier arrangement. Assign PCB connections directly from the pin-description table rather than relying on a generic SOIC drawing, because offset-null, supply, input, and output assignments must match the exact device.
Is OPA177GS suitable for precision instrumentation and data acquisition?
Yes, the OPA177GS is suitable for precision instrumentation and data-acquisition front ends. Its 10 µV maximum offset voltage, 0.1 µV/°C maximum drift, 130 dB minimum open-loop gain, and low-noise bipolar architecture preserve small DC signals better than a general-purpose amplifier. According to the Texas Instruments product page, it is also presented as an alternative to chopper-stabilized amplifiers without their typical low-frequency chopping disturbances.
What can replace OPA177GS in an existing 8-SOIC design?
OP177GS is a documented legacy drop-in candidate for OPA177GS because both use an 8-SOIC single-amplifier configuration and the cross-reference information identifies the OP177 family as pin-to-pin compatible. Board-level qualification is still required for exact offset, drift, noise, common-mode range, and supply-voltage requirements. Confirm the replacement against the manufacturer datasheet and the specific grade suffix used in the original BOM.
Is OPA177GS the same as OP177GS?
OPA177GS and OP177GS are closely related precision-amplifier designations associated with 8-SOIC single-circuit versions, but legacy manufacturer naming and ordering suffixes can differ. The cross-reference information identifies OP177-family devices as pin-to-pin replacements for OPA177. Engineers should compare exact ratings and operating-temperature grades before treating the legacy designation as a production-equivalent part.
OPA177GS versus OP177GSZ: which is better for a precision signal chain?
OPA177GS is generally the clearer choice when the design calls specifically for the TI OPA177 family and current manufacturer documentation, while OP177GSZ is a legacy cross-reference candidate for boards constrained to an existing 8-SOIC footprint. The two descriptions identify the same broad precision bipolar architecture, but designers should compare the exact offset, drift, noise, common-mode, and temperature specifications for the selected ordering code.
OPA177GS versus OP07CSZ: which is better for a low-offset amplifier stage?
OPA177GS is preferable when low noise, 600 kHz bandwidth, and a modern manufacturer product record are the primary requirements. OP07CSZ is a documented related precision-amplifier candidate, but it should not be assumed to match every OPA177GS rating. Compare input-offset voltage, drift, bias current, common-mode range, supply limits, and noise over the actual signal bandwidth before substitution.
When should I choose OPA177GS over a chopper-stabilized precision amplifier?
Choose OPA177GS when continuous low-frequency signal transfer, low output-noise density, and conventional amplifier behavior are more important than the very low offset provided by some chopper-stabilized devices. Texas Instruments describes the OPA177 as an effective alternative to chopper-stabilized amplifiers, avoiding typical chopping spikes while preserving precision bipolar performance. It is particularly useful in slow, high-gain instrumentation where continuous signal integrity matters.
Where can I buy OPA177GS online?
Use the Request a Quote form on this XAIPART product page to request OPA177GS availability, current lead time, and a formal quotation. The form is the appropriate route for exact-suffix sourcing because lifecycle, inventory, and shipment requirements can change. The manufacturer part number OPA177GS should be stated explicitly on the request.
What is the price of OPA177GS?
Submit an OPA177GS request through the Request a Quote form on this XAIPART page for the current quotation and quantity break. The requested quotation should identify the exact OPA177GS suffix, package, quantity, and shipment destination. Pricing for this exact ordering code should be confirmed at the time of quotation rather than inferred from another amplifier grade.
What is the lead time and stock status for OPA177GS?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this page. The manufacturer product page provides the ordering and quality information, while live inventory can vary by package suffix and shipment region. Providing the required quantity and destination with the request will allow an accurate fulfillment response.
What layout precautions preserve OPA177GS offset performance?
OPA177GS offset performance requires careful control of thermoelectric effects and PCB leakage. Texas Instruments specifically notes that dissimilar-metal connections generate thermal potentials that can degrade offset voltage and drift. Keep input traces short, avoid copper junctions and current flow near the inputs, use symmetric routing, and provide a clean ground reference so that the amplifier does not amplify thermal or leakage-generated error signals.
Does OPA177GS need special treatment for low-noise signal conditioning?
OPA177GS requires conventional precision-layout practices rather than special low-noise shielding in most instrumentation circuits. Place the amplifier close to the source, minimize input-loop area, avoid routing sensitive inputs beside high-current or switching nodes, and use a quiet, low-impedance ground path. According to the Texas Instruments datasheet guidance, mechanical and thermal conditions directly affect the achieved offset and drift.
Is OPA177GS RoHS compliant?
The OPA177GS is identified as RoHS compliant in the product compliance information for this part. RoHS applies to restricted substances in the finished component and does not by itself establish AEC-Q100 qualification, automotive suitability, or every regional substance declaration. Request the current manufacturer declaration or material-compliance report when a formal audit package is required.

Dados de referência de engenharia para OPA177GS — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose OPA177GS for precision instrumentation, bridge sensing, laboratory measurement, and low-level signal-conditioning circuits that benefit from a 10 µV maximum offset, 0.1 µV/°C maximum drift, 600 kHz bandwidth, and low-noise bipolar behavior. OPA177UA is the logical same-family choice when its specific accuracy grade or temperature classification better matches the production requirements, but both must use the same 8-SOIC footprint. OP177GS and OP177GSZ are appropriate legacy substitutions when the original board requires an 8-SOIC precision amplifier and the exact electrical ratings pass qualification. OP07CSZ is less suitable when the OPA177 bandwidth and noise characteristics are important, although it remains a potential same-footprint precision-amplifier option. For every substitution, verify supply range, common-mode range, input bias current, output swing, stability with the actual load, and operating-temperature grade.

Comparação com alternativas

Parâmetro Este produto OPA177UA OP177GS OP177GSZ OP07CSZ
Brand Texas Instruments Texas Instruments Analog Devices Analog Devices Analog Devices
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Amplifier Configuration Single-channel operational amplifier Single-channel operational amplifier Single-channel operational amplifier Single-channel operational amplifier Single-channel precision operational amplifier
Primary Application Precision instrumentation and data acquisition Precision instrumentation and data acquisition Precision instrumentation Precision instrumentation Precision instrumentation

Principais diferenciais

  • Low-noise continuous bipolar signal path (vs OP07CSZ)
  • Low DC offset and temperature drift (vs OP177GS)
  • Same-footprint upgrade path with current TI documentation (vs OPA177UA)

Notas de projeto

Keep both OPA177GS input traces short and symmetric, and avoid routing them beside switching nodes, relay contacts, or high-current return paths. Thermoelectric voltages caused by connections between dissimilar metals can degrade offset voltage and drift. Use matched copper paths where possible, keep the amplifier close to the source, and avoid resistive or leakage paths between the input pins and ground.

Place power-supply bypass capacitance close to the V+ and V- pins and connect the return directly to the appropriate ground plane. Keep sensitive feedback components and their ground returns away from noisy power-conversion components. Before finalizing the layout, verify the complete input, feedback, supply, and ground network for oscillation using the actual source impedance and load capacitance.

OPA177GS offers 600 kHz gain-bandwidth product, so the useful closed-loop bandwidth depends on the selected noise gain and stability requirements. Add input or output isolation only when needed to control capacitive loading, and evaluate the resulting bandwidth and noise penalty. Do not assume the full gain-bandwidth product is available in every gain configuration or with arbitrary load capacitance.

Informações de conformidade

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

RoHS compliance and MSL Level 3, 260°C, 168-hour information are identified for OPA177GS. Other compliance declarations were not confirmed.

Buscas relacionadas

opa177gs datasheet OPA177GS precision operational amplifier OPA177GS pinout OPA177GS datasheet pdf OPA177GS 8-SOIC OPA177GS 600kHz OPA177GS low offset voltage OPA177GS drop-in replacement OPA177GS equivalent amplifier OPA177GS vs OP177GS OPA177GS instrumentation application OPA177GS price and stock

Componentes & termos relacionados

Texas Instruments OPA177GS OPA177UA OP177GS OP177GSZ OP07CSZ precision operational amplifier bipolar operational amplifier voltage-feedback amplifier analog integrated circuit signal conditioning data acquisition precision instrumentation gain-bandwidth product input offset voltage input offset drift open-loop gain quiescent current thermoelectric voltage 8-pin SOIC SOIC package family surface-mount package RoHS MSL Level 3 bridge sensor
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ