Texas Instruments

OPA861ID - 80 MHz Wide-Bandwidth OTA | Texas Instruments

N.º da peça: OPA861ID ✓ Ativo
8-pin SOIC Package
MOQ: 1 |

OPA861ID Visão geral

The Texas Instruments OPA861ID is a wide-bandwidth operational transconductance amplifier (OTA) with an 80 MHz characteristic bandwidth, packaged in an 8-pin SOIC. It is a bipolar analog IC intended for signal-processing circuits that require voltage-to-current conversion rather than conventional voltage-output operational-amplifier behavior. The OPA861ID is associated with high-performance video, RF, and IF signal chains, where a transconductance element can provide controlled current drive, programmable gain, and analog signal conditioning.

An operational transconductance amplifier is a voltage-controlled current-source building block. Its differential input voltage is converted into an output current that is proportional to the input and determined by the transconductance gain. In the OPA861 family, the manufacturer describes the device as a versatile monolithic wideband bipolar OTA. The OTA is therefore positioned above basic passive and discrete signal-conditioning components in the hierarchy of analog signal-processing ICs, while remaining a specialized alternative to a conventional operational amplifier.

The key headline characteristics of the OPA861ID are its 80 MHz bandwidth designation, bipolar implementation, wide-bandwidth transconductance operation, and 8-pin SOIC package. These attributes make the device suitable for wideband analog systems in which signal bandwidth and controlled current output are more important than the familiar voltage-output architecture of an ordinary op amp. The 8-SOIC format also supports conventional surface-mount PCB assembly and routing, although the exact footprint dimensions and exposed-pad details should be checked against the package drawing.

OPA861ID applications include RF and intermediate-frequency signal conditioning, high-performance video circuits, current-feedback filtering, analog gain-control paths, and instrumentation requiring a voltage-to-current conversion stage. In an RF or IF chain, the OTA can operate within a feedback loop that establishes filtering or gain, allowing the amplifier's transconductance behavior to be used as an active analog building block. In video systems, the wide-bandwidth characteristic supports higher-frequency signal paths than a general-purpose precision op amp.

Designers should treat the OPA861ID as a high-speed analog device rather than a generic voltage regulator or precision low-noise amplifier. Input and feedback component selection, signal amplitude, supply headroom, and output-current limits must be evaluated together. The OPA861ID datasheet and its OTA section should be used to establish the exact recommended operating conditions, compensation approach, and application-circuit topology.

Alternativas drop-in para OPA861ID — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Nenhuma alternativa drop-in disponível para este produto.

Solicitar alternativas

OPA861ID Classificações máximas e características elétricas

Product Type Wide-bandwidth operational transconductance amplifier (OTA)
Amplifier Type Transconductance amplifier
Number of Circuits 1 circuit
Characteristic Bandwidth 80 MHz
Process Technology Bipolar
Architecture Operational transconductance amplifier
Tipo de saída Current output
Encapsulamento 8-pin SOIC
Package Width 3.90 mm
Package Length 0.154 in
Tipo de montagem Surface mount

Guia de Configuração de Pinos do OPA861ID 0.154 in

Configuração de pinos para OPA861ID (pacote 0.154 in). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 0.154 in para OPA861ID

Nenhum dado detalhado de pinagem disponível para OPA861ID.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

OPA861ID é adequado para 6 aplicaçãos: RF and IF Signal Conditioning, High-Performance Video Signal Paths, Active Filtering with OTA Feedback, Analog Gain-Control Cells, Wideband Instrumentation Front Ends, Optical and Communication Signal Conditioning.

🌐

RF and IF Signal Conditioning

OPA861ID fits wideband RF and intermediate-frequency signal-conditioning stages because it is an 80 MHz bipolar operational transconductance amplifier with a current-output architecture. It can be used as the active transconductance element in an active filter, gain cell, or feedback signal path where a controlled voltage-to-current relationship is useful. The manufacturer's OPA861 family is specifically identified for RF and IF circuitry. Compared with a general-purpose op amp, the OPA861 provides the native OTA function, while its wideband characteristics support higher-frequency signal paths. Final design work should use the datasheet's OTA application circuits, recommended feedback values, supply requirements, and output-compliance limits.

📺

High-Performance Video Signal Paths

OPA861ID is appropriate for high-performance video circuits because Texas Instruments classifies the OPA861 as a wide-bandwidth bipolar OTA intended for video applications. Its 80 MHz bandwidth designation and current-output capability can support active filtering, programmable-gain elements, and feedback-based signal conditioning. The device should be selected when the signal path needs more bandwidth or a dedicated transconductance function than a conventional precision amplifier provides. The key engineering checks are the required video bandwidth, signal amplitude, settling behavior, supply headroom, and output-current capability. Use the manufacturer's OPA861 datasheet and application guidance to establish the exact topology and component values.

🔧

Active Filtering with OTA Feedback

OPA861ID can serve as the transconductance element of an active filter because an OTA naturally converts differential input voltage into proportional output current. In a feedback network, that current behavior can form the basis of voltage-mode filter and gain stages. The OPA861ID's 80 MHz bandwidth provides useful margin for wideband filter experiments, while its bipolar OTA implementation gives the circuit a dedicated analog building block. Engineers must verify stability, gain accuracy, component tolerances, and maximum signal excursion against the manufacturer datasheet. The OTA's biasing and feedback arrangement should follow the documented OPA861 application approach rather than a generic op-amp schematic.

⚡

Analog Gain-Control Cells

OPA861ID is suitable for analog gain-control cells where a voltage should influence a current in a feedback amplifier. The dedicated OTA topology can make the control relationship more direct than a conventional voltage-output amplifier, particularly in RF, IF, and video systems requiring wideband operation. The 80 MHz bandwidth allows the cell to operate across a broader signal range than many precision op amps. Designing the stage requires attention to control-polarity, maximum transconductance, linearity, and output swing. Confirm these limits, supply rails, and stability requirements in the official OPA861 documentation before fixing the external resistor and capacitor values.

🖥️

Wideband Instrumentation Front Ends

OPA861ID can support instrumentation front ends that require a high-bandwidth transconductance stage rather than a conventional differential voltage-output amplifier. Its 80 MHz bandwidth is useful when the front end must preserve signal detail while converting a measured differential voltage into a controlled current. Such a stage may precede gain, filtering, or sampling circuitry. The bipolar OPA861 implementation and 8-pin SOIC package make it practical for compact wideband instrumentation. Selection should account for input common-mode limits, output compliance, noise, offset, and the precision requirements of the measurement system. For metrology-grade results, compare these characteristics against the complete signal-chain error budget.

📱

Optical and Communication Signal Conditioning

OPA861ID is relevant to communication and optical receiver conditioning where a high-speed differential signal may require controlled current drive before further filtering or conversion. The 80 MHz wideband bipolar OTA can support RF, IF, and related intermediate-frequency stages identified by the manufacturer. This application is especially relevant when a transconductance cell offers a simpler or more linear interface than a conventional op-amp output stage. The circuit must be checked for input range, output compliance, allowable signal amplitude, and stability. Layout should minimize parasitic capacitance around high-impedance nodes and preserve the feedback topology recommended by Texas Instruments.

What is the operating function of OPA861ID?
The OPA861ID is a wide-bandwidth operational transconductance amplifier that converts a differential input voltage into an output current. Texas Instruments describes the OPA861 as a monolithic bipolar OTA for wideband video, RF, and IF systems. Its 80 MHz bandwidth and 8-pin SOIC package make it suitable for high-frequency analog signal-conditioning and feedback applications.
What are the key specifications of OPA861ID that engineers should know?
OPA861ID is a single-circuit, bipolar wide-bandwidth OTA in an 8-pin SOIC package with an 80 MHz bandwidth designation. Unlike a conventional voltage-output operational amplifier, its defining function is voltage-to-current conversion. The manufacturer identifies the OPA861 family for high-performance video, RF, and IF circuitry, where bandwidth and controlled transconductance are primary design requirements.
Where can I download the OPA861ID datasheet PDF?
The official OPA861ID datasheet PDF is available from the Texas Instruments product literature at https://www.ti.com/lit/ds/symlink/opa861.pdf. The device datasheet contains the OTA description, package information, operating conditions, electrical characteristics, and application guidance. Use the manufacturer document for design calculations and final component selection.
Where can I find the OPA861ID pinout?
The OPA861ID pinout is identified in the pin-configuration section of the official Texas Instruments OPA861 datasheet. The package is an 8-pin SOIC, matching the soic-8 package drawing used for this listing. Verify the individual pin names and numbering against the datasheet before assigning PCB nets or assembling a prototype.
Is OPA861ID suitable for RF and IF signal conditioning?
Yes, OPA861ID is specifically positioned for wideband RF and intermediate-frequency signal conditioning. Its 80 MHz bandwidth designation, bipolar OTA architecture, and current-output behavior provide the fundamental building blocks for active gain, filtering, and controlled signal-path stages. The final suitability depends on the required frequency, signal amplitude, supply rails, and feedback network.
Where can I buy OPA861ID online?
Use the Request a Quote form on this page to ask about OPA861ID availability, order quantities, and delivery terms. XAIPART can confirm the appropriate sourcing route for the exact 8-pin SOIC orderable MPN. Quote requests are preferable to relying on a static listing because component inventory and lead time can change.
What is the price of OPA861ID?
The current commercial terms for OPA861ID should be requested through the Request a Quote form on this page. Because quote-first pricing depends on quantity, order status, and sourcing conditions, the structured offer is omitted when no qualifying quantity-break table is available. Submit the required quantity and target packaging for a current response.
What is the lead time for OPA861ID?
Request the current OPA861ID lead time using the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing status, and inventory conditions. The exact 8-pin SOIC MPN should be stated in the request so that availability and delivery can be confirmed for the intended production design.
Is OPA861ID in stock?
Current OPA861ID stock status should be confirmed through the Request a Quote form on this page. Inventory can move after a quotation is generated, so request the required quantity and date by which material must arrive. This avoids treating a distributor search result as a guaranteed stock reservation.
What can replace OPA861ID?
A valid replacement for OPA861ID must preserve the 8-pin SOIC footprint, pin-to-pin behavior, supply range, bandwidth, transconductance, output-current capability, and required biasing arrangement. No technically validated cross-brand drop-in replacement is identified for the OPA861ID. Treat any OTA with a similar bandwidth as a functional alternative until its pinout and electrical limits have been checked against the manufacturer datasheet.
What is the best drop-in replacement for OPA861ID?
The safest drop-in path is an orderable variant of the Texas Instruments OPA861 that uses the same 8-pin SOIC footprint and has been confirmed as pin-to-pin compatible in the official ordering information. A tape-and-reel order code may change packing rather than electrical behavior, but it should not be treated as a distinct engineering alternative. No independently verified cross-brand drop-in replacement is identified.
OPA861ID versus a conventional operational amplifier: which is better?
OPA861ID is better when the circuit specifically needs voltage-to-current conversion and the bandwidth of a wideband OTA. A conventional operational amplifier is generally simpler when a voltage-output response and standard feedback operation are sufficient. The OPA861ID offers 80 MHz bandwidth and bipolar transconductance behavior, but its biasing and feedback requirements must match the intended OTA circuit.
Is OPA861ID suitable for high-performance video applications?
Yes, Texas Instruments identifies high-performance video as an intended application for the OPA861 family. OPA861ID combines an 80 MHz bandwidth designation with a wideband bipolar OTA architecture, making it relevant to video signal paths that exceed the practical bandwidth of many general-purpose precision amplifiers. Signal-level and timing requirements still need to be checked against the device characteristics.
When should I choose OPA861ID over a conventional op amp?
Choose OPA861ID when the signal chain benefits from a dedicated transconductance stage, a current-output element, or an OTA feedback topology. Its 80 MHz bandwidth and bipolar construction suit wideband video, RF, and IF functions. Select a conventional op amp instead when a voltage-output architecture, simpler offset adjustment, or standard unity-gain stability is the primary requirement.
How should OPA861ID be designed into a feedback amplifier?
Design the OPA861ID as a transconductance element inside a closed feedback loop and use the manufacturer application information to select feedback and compensation components. Keep the input and feedback paths short, verify signal polarity, and observe the exact supply and output-compliance limits. The device should not be treated as a standard voltage-output op amp without checking its OTA-specific application circuits.

Dados de referência de engenharia para OPA861ID — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose OPA861ID when the design specifically requires a wide-bandwidth transconductance stage for video, RF, IF, filtering, or controlled gain-cell applications. Its 80 MHz bandwidth, bipolar OTA architecture, and current-output behavior make it preferable to a conventional voltage-output op amp when the feedback topology is designed around an OTA. Select a standard precision op amp instead when simple voltage-output operation, low offset, or unity-gain stability is more important than dedicated transconductance. For instrumentation, verify input noise, offset, common-mode range, and output compliance in addition to bandwidth. Because no independently verified cross-brand drop-in substitute is identified, do not approve another manufacturer's OTA solely because its bandwidth appears similar; first confirm the SOIC-8 pinout, supply requirements, transconductance, output-current capability, biasing, and stability in the original circuit.

Principais diferenciais

  • Dedicated transconductance conversion (vs Conventional voltage-output operational amplifier)
  • Wideband analog signal handling (vs General-purpose precision operational amplifier)
  • Compact surface-mount implementation (vs Discrete or higher-channel-count transconductance systems)

Notas de projeto

Do not substitute a conventional voltage-output op amp without redesigning the feedback network. OPA861ID is an operational transconductance amplifier, so its input voltage produces an output current. Use the OPA861 OTA application section as the basis for resistor values, compensation, biasing, and signal polarity.

Route the high-speed input and feedback paths with short traces and controlled return paths. Place the OTA's external compensation, feedback, and biasing components close to the device where the topology permits, and avoid long parallel copper paths that can increase parasitic coupling. Confirm the exact SOIC-8 footprint and pin orientation against the manufacturer package drawing.

Evaluate the complete wideband path rather than only the 80 MHz bandwidth designation. Input capacitance, feedback-node capacitance, supply bypassing, probe loading, and output compliance can affect stability and usable bandwidth. Begin with the manufacturer's documented OTA topology, then adjust component placement and values based on measured gain, peaking, and transient response.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No explicit compliance declarations are included in the manufacturer product-page or distributor excerpts. AEC-Q100 status is not applicable because OPA861ID is an analog amplifier rather than an automotive-qualified device variant.

Dados verificados em: 2026-11-09 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

OPA861ID datasheet OPA861ID datasheet pdf OPA861ID pinout OPA861ID specifications OPA861ID equivalent OPA861ID replacement OPA861ID drop-in replacement OPA861ID SOIC-8 OPA861ID 80 MHz OTA OPA861ID application circuit Texas Instruments OPA861ID OPA861ID price OPA861ID stock OPA861ID RF IF amplifier

Componentes & termos relacionados

Texas Instruments OPA861 OPA861ID operational transconductance amplifier OTA wide-bandwidth amplifier bipolar amplifier voltage-controlled current source transconductor analog signal-processing IC semiconductor 80 MHz bandwidth SOIC-8 surface-mount package RF signal conditioning IF signal conditioning video signal processing active filter analog gain control current output feedback amplifier
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ