OPA861ID - 80 MHz Wide-Bandwidth OTA | Texas Instruments
MPN: OPA861ID ✓ فعالOPA861ID نمای کلی
An operational transconductance amplifier is a voltage-controlled current-source building block. Its differential input voltage is converted into an output current that is proportional to the input and determined by the transconductance gain. In the OPA861 family, the manufacturer describes the device as a versatile monolithic wideband bipolar OTA. The OTA is therefore positioned above basic passive and discrete signal-conditioning components in the hierarchy of analog signal-processing ICs, while remaining a specialized alternative to a conventional operational amplifier.
The key headline characteristics of the OPA861ID are its 80 MHz bandwidth designation, bipolar implementation, wide-bandwidth transconductance operation, and 8-pin SOIC package. These attributes make the device suitable for wideband analog systems in which signal bandwidth and controlled current output are more important than the familiar voltage-output architecture of an ordinary op amp. The 8-SOIC format also supports conventional surface-mount PCB assembly and routing, although the exact footprint dimensions and exposed-pad details should be checked against the package drawing.
OPA861ID applications include RF and intermediate-frequency signal conditioning, high-performance video circuits, current-feedback filtering, analog gain-control paths, and instrumentation requiring a voltage-to-current conversion stage. In an RF or IF chain, the OTA can operate within a feedback loop that establishes filtering or gain, allowing the amplifier's transconductance behavior to be used as an active analog building block. In video systems, the wide-bandwidth characteristic supports higher-frequency signal paths than a general-purpose precision op amp.
Designers should treat the OPA861ID as a high-speed analog device rather than a generic voltage regulator or precision low-noise amplifier. Input and feedback component selection, signal amplitude, supply headroom, and output-current limits must be evaluated together. The OPA861ID datasheet and its OTA section should be used to establish the exact recommended operating conditions, compensation approach, and application-circuit topology.
جایگزینهای drop-in برای OPA861ID — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
هیچ جایگزین مستقیمی برای این محصول موجود نیست.
درخواست جایگزینOPA861ID حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | Wide-bandwidth operational transconductance amplifier (OTA) |
| Amplifier Type | Transconductance amplifier |
| Number of Circuits | 1 circuit |
| Characteristic Bandwidth | 80 MHz |
| Process Technology | Bipolar |
| Architecture | Operational transconductance amplifier |
| نوع خروجی | Current output |
| بستهبندی | 8-pin SOIC |
| Package Width | 3.90 mm |
| Package Length | 0.154 in |
| نوع نصب | Surface mount |
راهنمای پیکربندی پین OPA861ID 0.154 in
پیکربندی پین برای OPA861ID (پکیج 0.154 in). این قطعه آنالوگ دارای پینهای ورودی، خروجی و تغذیه است. برای پیکربندیهای پین offset null، جبرانسازی و فعالسازی به دیتاشیت سازنده مراجعه کنید. ایدهآل برای مدارهای شرطیسازی سیگنال و تقویتکننده.
داده پینآوت تفصیلی موجود نیست برای OPA861ID.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
OPA861ID مناسب است برای 6 کاربردs: RF and IF Signal Conditioning, High-Performance Video Signal Paths, Active Filtering with OTA Feedback, Analog Gain-Control Cells, Wideband Instrumentation Front Ends, Optical and Communication Signal Conditioning.
RF and IF Signal Conditioning
OPA861ID fits wideband RF and intermediate-frequency signal-conditioning stages because it is an 80 MHz bipolar operational transconductance amplifier with a current-output architecture. It can be used as the active transconductance element in an active filter, gain cell, or feedback signal path where a controlled voltage-to-current relationship is useful. The manufacturer's OPA861 family is specifically identified for RF and IF circuitry. Compared with a general-purpose op amp, the OPA861 provides the native OTA function, while its wideband characteristics support higher-frequency signal paths. Final design work should use the datasheet's OTA application circuits, recommended feedback values, supply requirements, and output-compliance limits.
پیشنهادی
High-Performance Video Signal Paths
OPA861ID is appropriate for high-performance video circuits because Texas Instruments classifies the OPA861 as a wide-bandwidth bipolar OTA intended for video applications. Its 80 MHz bandwidth designation and current-output capability can support active filtering, programmable-gain elements, and feedback-based signal conditioning. The device should be selected when the signal path needs more bandwidth or a dedicated transconductance function than a conventional precision amplifier provides. The key engineering checks are the required video bandwidth, signal amplitude, settling behavior, supply headroom, and output-current capability. Use the manufacturer's OPA861 datasheet and application guidance to establish the exact topology and component values.
پیشنهادی
Active Filtering with OTA Feedback
OPA861ID can serve as the transconductance element of an active filter because an OTA naturally converts differential input voltage into proportional output current. In a feedback network, that current behavior can form the basis of voltage-mode filter and gain stages. The OPA861ID's 80 MHz bandwidth provides useful margin for wideband filter experiments, while its bipolar OTA implementation gives the circuit a dedicated analog building block. Engineers must verify stability, gain accuracy, component tolerances, and maximum signal excursion against the manufacturer datasheet. The OTA's biasing and feedback arrangement should follow the documented OPA861 application approach rather than a generic op-amp schematic.
پیشنهادی
Analog Gain-Control Cells
OPA861ID is suitable for analog gain-control cells where a voltage should influence a current in a feedback amplifier. The dedicated OTA topology can make the control relationship more direct than a conventional voltage-output amplifier, particularly in RF, IF, and video systems requiring wideband operation. The 80 MHz bandwidth allows the cell to operate across a broader signal range than many precision op amps. Designing the stage requires attention to control-polarity, maximum transconductance, linearity, and output swing. Confirm these limits, supply rails, and stability requirements in the official OPA861 documentation before fixing the external resistor and capacitor values.
پیشنهادی
Wideband Instrumentation Front Ends
OPA861ID can support instrumentation front ends that require a high-bandwidth transconductance stage rather than a conventional differential voltage-output amplifier. Its 80 MHz bandwidth is useful when the front end must preserve signal detail while converting a measured differential voltage into a controlled current. Such a stage may precede gain, filtering, or sampling circuitry. The bipolar OPA861 implementation and 8-pin SOIC package make it practical for compact wideband instrumentation. Selection should account for input common-mode limits, output compliance, noise, offset, and the precision requirements of the measurement system. For metrology-grade results, compare these characteristics against the complete signal-chain error budget.
پیشنهادی
Optical and Communication Signal Conditioning
OPA861ID is relevant to communication and optical receiver conditioning where a high-speed differential signal may require controlled current drive before further filtering or conversion. The 80 MHz wideband bipolar OTA can support RF, IF, and related intermediate-frequency stages identified by the manufacturer. This application is especially relevant when a transconductance cell offers a simpler or more linear interface than a conventional op-amp output stage. The circuit must be checked for input range, output compliance, allowable signal amplitude, and stability. Layout should minimize parasitic capacitance around high-impedance nodes and preserve the feedback topology recommended by Texas Instruments.
پیشنهادی
دادههای مرجع مهندسی برای OPA861ID — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
تفاوتهای کلیدی
- Dedicated transconductance conversion (در مقابلConventional voltage-output operational amplifier)
- Wideband analog signal handling (در مقابلGeneral-purpose precision operational amplifier)
- Compact surface-mount implementation (در مقابلDiscrete or higher-channel-count transconductance systems)
یادداشتهای طراحی
Do not substitute a conventional voltage-output op amp without redesigning the feedback network. OPA861ID is an operational transconductance amplifier, so its input voltage produces an output current. Use the OPA861 OTA application section as the basis for resistor values, compensation, biasing, and signal polarity.
Route the high-speed input and feedback paths with short traces and controlled return paths. Place the OTA's external compensation, feedback, and biasing components close to the device where the topology permits, and avoid long parallel copper paths that can increase parasitic coupling. Confirm the exact SOIC-8 footprint and pin orientation against the manufacturer package drawing.
Evaluate the complete wideband path rather than only the 80 MHz bandwidth designation. Input capacitance, feedback-node capacitance, supply bypassing, probe loading, and output compliance can affect stability and usable bandwidth. Begin with the manufacturer's documented OTA topology, then adjust component placement and values based on measured gain, peaking, and transient response.
اطلاعات انطباق
No explicit compliance declarations are included in the manufacturer product-page or distributor excerpts. AEC-Q100 status is not applicable because OPA861ID is an analog amplifier rather than an automotive-qualified device variant.