NXP Semiconductors

PCA9513D - 400kHz SMBus Buffer | NXP Semiconductors

N.º da peça: PCA9513D ✗ Fim de vida
8-pin SO Package 400 kHz Speed
MOQ: 1 |

PCA9513D Visão geral

The NXP Semiconductors PCA9513D is a discontinued one-channel hot-pluggable I2C-bus and SMBus buffer rated for operation up to 400 kHz and packaged in an 8-pin SO package. Its primary function is to isolate a bus segment while allowing equipment to be inserted into or removed from a live backplane without corrupting the clock or data traffic.

An I2C bus buffer is a specialized interface IC that reproduces logic levels between a master-side bus and a slave-side bus. The buffered side can remain operational during insertion or removal, helping prevent disturbance of a live communication network. In the broader hierarchy, the PCA9513D belongs to the I2C and SMBus interface-controller family, which sits above bus buffers within interface ICs and broader semiconductor power-management and signal-conditioning systems.

The principal identified characteristics are one buffered channel, a 400 kHz operating-frequency rating, an 8-pin SOIC-compatible package, and hot-pluggable bus operation. The device is intended to provide bus-segment isolation in systems where modules or plug-in cards can be added dynamically. Because the manufacturer marks PCA9513D as discontinued, its documentation and product information are retained for historical design reference rather than new-product selection.

Technically, the PCA9513D uses separate upstream and downstream sides to divide the I2C bus into buffered segments. Its purpose is to improve system behavior during live insertion and removal rather than to increase the standardized bus speed beyond 400 kHz. Designers must still account for capacitance, rise time, pull-up placement, and the electrical behavior of each bus segment when laying out the complete circuit.

Typical uses include hot-swappable industrial backplanes, telecommunications equipment with removable line cards, server peripherals, and embedded systems that add or remove bus-connected modules while other devices remain active. The buffer is especially useful where an unplugged card could otherwise disturb the shared clock and data conductors.

For a new design, verify the complete I2C system against the PCA9513D datasheet, including absolute maximum ratings, timing, supply requirements, and input thresholds. On an existing board, confirm that the original package footprint and signal assignment match before treating another part as a replacement. In a live system, isolate power as well as data when practical so that insertion transients do not propagate through the bus.

This page combines the discontinued-product status, bus-buffer specifications, drop-in replacement assessment, application guidance, and engineering comparison information needed to evaluate the PCA9513D for legacy hardware and controlled replacement programs.

Alternativas drop-in para PCA9513D — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

PCA9513AD

✅ Drop-In
📦 SOIC-8
Same one-channel 400 kHz hot-pluggable bus-buffer function and 8-pin SO footprint; revision-specific timing and electrical limits require verification.

📋 Alternativa de referência (fora do catálogo)

PCA9513A

✅ Drop-In ⚠️ Especificações não verificadas
📦 SOIC-8
Same one-channel hot-pluggable I2C/SMBus-buffer family in an 8-pin SO package; ordering suffix and revision limits must be checked against the original device.

📋 Alternativa de referência (fora do catálogo)

PCA9513D Especificações

Device Type Hot-pluggable I2C-bus and SMBus buffer
Number of Channels 1 channel
Maximum Bus Frequency 400 kHz
Encapsulamento 8-pin SO
Tipo de montagem Surface mount
Terminal Count 8 terminals
Package Shape Rectangular
Terminal Form Gull wing
Temperature Grade Industrial
Bus Type I2C and SMBus
Hot-Plug Support Yes

Guia de Configuração de Pinos do PCA9513D rectangular

Configuração de pinos para PCA9513D (pacote rectangular). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote rectangular para PCA9513D

Nenhum dado detalhado de pinagem disponível para PCA9513D.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

PCA9513D é adequado para 6 aplicaçãos: Hot-Pluggable Industrial Backplane, Telecommunications Line Cards, Server Peripherals, Embedded Test and Measurement Modules, Removable Sensor Cards, Legacy Peripheral Bus Isolation.

🏭

Hot-Pluggable Industrial Backplane

The PCA9513D fits an industrial backplane that accepts or removes I2C or SMBus equipment cards while other devices remain active. Its one-channel hot-pluggable buffer separates the upstream controller from the downstream card-facing bus, helping reduce disturbance when a connector is mated or unmated. The identified 400 kHz operating rating supports standard-speed and fast-mode I2C traffic, while the 8-pin SO package preserves a compact controller-board footprint. The system designer must still control connector power transients, maintain proper pull-up placement, and verify the total capacitance of each isolated segment against the manufacturer limits before treating insertion as electrically safe.

🌐

Telecommunications Line Cards

The PCA9513D is applicable to telecommunications line-card systems in which a removable board communicates through I2C or SMBus and must not corrupt traffic on the active bus. The buffered downstream segment can help isolate the card interface during insertion and removal, supporting more predictable control traffic at the 400 kHz maximum identified frequency. Its one-channel structure suits a dedicated clock-and-data pair rather than a multi-channel multiplexer. Design validation should include connector sequencing, powered-versus-unpowered insertion behavior, bus rise time, pull-up resistor placement, and the exact NXP timing and absolute-maximum-rating tables before deployment.

🖥️

Server Peripherals

The PCA9513D can divide a shared I2C or SMBus control bus from a server peripheral or expansion module, reducing the effect of hot insertion on the rest of the bus. Its one-channel, 400 kHz hot-pluggable-buffer arrangement is useful when the server requires deterministic control traffic during module replacement. The 8-pin SO package is convenient for legacy controller and peripheral boards, but thermal and signal-integrity checks remain necessary at the system level. Keep the buffer-side traces short, place pull-ups where they maintain valid rise time on the intended segment, and verify that power-state transitions cannot violate the input limits of the buffer during connector mating.

🔧

Embedded Test and Measurement Modules

The PCA9513D is suitable for legacy test and measurement equipment that connects or disconnects a sensor or instrument module over I2C or SMBus without intentionally interrupting other controllers on the bus. The hot-pluggable buffer creates a segmented bus that can reduce disturbance to the running system, and the 400 kHz rating accommodates common instrument-control traffic. Because this is a one-channel device, the complete I2C clock and data pair must be routed through the corresponding buffered sides. Validate cable length, distributed capacitance, pull-up strength, and connector transients with the actual module because successful logic-level isolation does not eliminate analog or transmission-line effects.

🧩

Removable Sensor Cards

The PCA9513D can isolate a removable sensor card from a controller that continues communicating with other sensors on the shared I2C or SMBus network. Its one-channel hot-pluggable-buffer function is intended to reduce bus disturbance when the card is inserted or removed, and its 400 kHz maximum identified frequency is appropriate for many low-bandwidth sensor-control networks. The system should sequence card power and ground appropriately and use connector and layout techniques that limit switching noise. Before production, verify that each isolated segment remains within the manufacturer-specified capacitance and timing limits and that both sides of the device receive a valid supply during all operating states.

🔧

Legacy Peripheral Bus Isolation

The PCA9513D remains useful in legacy peripheral designs where a controller, printer, storage module, or acquisition board shares an I2C or SMBus connection and may need service access without a full system shutdown. The hot-pluggable buffer provides a segmented interface for the serviceable module, while the 400 kHz operating rating supports the bus class associated with the original PCA9513D design. The compact 8-pin SO package supports repair boards without changing the original footprint. Ensure that replacement components match pin orientation and inspect timing, bus capacitance, and supply sequencing; hot-plug support should not be interpreted as permission to exceed input voltage or current limits.

Resumo dos produtos recomendados

PCA9513D NXP Semiconductors Usado em: Hot-Pluggable Industrial Backplane, Telecommunications Line Cards, Server Peripherals, Embedded Test and Measurement Modules, Removable Sensor Cards, Legacy Peripheral Bus Isolation PCA9513AD Same-family replacement candidate Usado em: Hot-Pluggable Industrial Backplane, Telecommunications Line Cards, Server Peripherals, Embedded Test and Measurement Modules, Removable Sensor Cards, Legacy Peripheral Bus Isolation
What is the PCA9513D?
The PCA9513D is an NXP Semiconductors one-channel hot-pluggable I2C-bus and SMBus buffer operating up to 400 kHz in an 8-pin SO package. According to the NXP product page, the device is no longer manufactured and its information is retained for historical reference. It separates upstream and downstream bus sections so equipment can be inserted into or removed from a live backplane with reduced risk of disrupting the clock and data conductors.
What is the operating frequency of the PCA9513D?
The PCA9513D supports I2C-bus and SMBus operation up to 400 kHz. The manufacturer product listing identifies the device as a one-channel, 400 kHz buffer, while the archived product material describes it as a hot-swappable bus buffer. The 400 kHz value is the maximum identified operating frequency and does not remove the need to check rise-time, capacitance, pull-up, and timing margins in the completed bus.
Where can I download the PCA9513D datasheet PDF?
The PCA9513D datasheet and historical product information can be reached through the NXP product page at https://www.nxp.com/products/PCA9513D, with additional PDF references available through https://www.datasheets.com/nxp/pca9513d. Because PCA9513D is discontinued, the NXP page is retained for historical reference. Use the manufacturer document for authoritative pin assignments, timing limits, supply requirements, and electrical characteristics before modifying a live design.
Where can I find the PCA9513D pinout?
The PCA9513D pinout is shown in the manufacturer datasheet for the 8-pin SO package rather than on the NXP product summary page. Start with https://www.nxp.com/products/PCA9513D and select the associated technical documentation. The package is an 8-pin surface-mount SO device, so the footprint must also be checked for lead pitch, body dimensions, and pin-one orientation before assigning replacement components.
Is the PCA9513D still in production?
No, NXP marks the PCA9513D as discontinued and no longer manufactured. The manufacturer still provides the product page and archived content for historical reference, which helps engineers document legacy equipment and assess repair strategies. For a new production design, confirm whether a currently supported buffer meets the required electrical and functional specifications rather than treating the archived PCA9513D documentation as a new-product commitment.
Where can I buy the PCA9513D and check its lead time?
Use the Request a Quote form on this page to request the PCA9513D, current availability, lead time, and any supported order quantities. The manufacturer identifies the device as discontinued, so availability may depend on legacy inventory rather than an active production schedule. Provide the exact PCA9513D ordering suffix, quantity, and required package form when requesting a quotation to avoid mismatched legacy parts.
What is the price of the PCA9513D?
The current commercial terms for the PCA9513D are shown through the Request a Quote form on this page rather than as a static price. Because NXP no longer manufactures the device, availability and order conditions can vary with legacy inventory and quantity. Submit the required quantity and exact package suffix in the form to obtain the applicable quotation and current lead-time confirmation.
Is the PCA9513D in stock?
Current PCA9513D stock should be confirmed through the Request a Quote form on this page because the manufacturer classifies the component as discontinued. The presence of catalog listings does not by itself establish current stock. When requesting a quotation, state the required quantity, date code preference, and whether unbroken lot traceability or documented sourcing is required for the repair.
Can PCA9513D be used for hot-pluggable I2C equipment insertion?
Yes, the PCA9513D is specifically identified as a hot-pluggable I2C-bus and SMBus buffer for inserting or removing equipment from a live backplane. Its one-channel buffer architecture separates the bus into upstream and downstream segments to reduce disturbance to active traffic. The design must still manage power sequencing, bus capacitance, pull-up networks, and connector transients so that insertion does not exceed the device's electrical ratings.
PCA9513D vs PCA9513AD - which is the better replacement?
PCA9513AD is the closest same-family candidate for a PCA9513D replacement because it retains the one-channel hot-swappable I2C/SMBus-buffer function in the same 8-pin SO footprint. Exact equivalence depends on the revision-specific timing, electrical limits, and ordering suffix. Compare the manufacturer data for both devices and verify every pin function before substitution, because a matching package alone does not prove identical behavior at the system boundary.
When should I choose PCA9513D over a newer bus buffer?
Choose the PCA9513D when maintaining an existing 8-pin hot-pluggable I2C or SMBus design whose PCB, pin assignments, and legacy behavior must remain unchanged. Do not select it for a new design unless its discontinued status, documentation availability, and sourcing plan are acceptable. A currently supported buffer is generally preferable for new platforms when it provides equal hot-plug behavior and meets the required 400 kHz bus rate.
Is the PCA9513D suitable for industrial equipment with removable modules?
The PCA9513D is suitable for legacy industrial equipment that inserts or removes I2C or SMBus modules on a live backplane, provided the complete circuit stays within the manufacturer's electrical limits. Its hot-pluggable buffer function helps isolate the downstream bus segment, while the industrial temperature grade identifies its intended operating class. Power removal and connector transients still require separate analysis because bus isolation does not eliminate all insertion hazards.
What is the best drop-in replacement for PCA9513D?
PCA9513AD is the most credible drop-in candidate identified for the PCA9513D because it belongs to the same NXP one-channel hot-pluggable bus-buffer family and uses the same 8-pin SO package. No confirmed five-part cross-manufacturer set was established with sufficient evidence to claim exact pin and parameter equivalence. Validate the PCA9513AD datasheet, ordering suffix, timing, and supply requirements before approving it as a production replacement.
Can PCA9517 replace the PCA9513D?
The PCA9517 should not be assumed to be a direct PCA9513D replacement merely because both are NXP bus-buffer devices. The PCA9517 provides multiple buffered channels, while the PCA9513D is identified as a one-channel buffer; their upstream and downstream pin assignments therefore require separate review. Use the manufacturer pin descriptions and application diagrams to determine whether the existing board can be reused without crossing signal assignments or changing the bus topology.
What are the key specifications of PCA9513D that engineers should know?
The key identified specifications are one buffered channel, operation up to 400 kHz, hot-pluggable I2C and SMBus support, an industrial temperature grade, and an 8-pin gull-wing surface-mount package. NXP marks the device as discontinued, so current sourcing requires a legacy-inventory strategy. Exact supply voltage, timing, capacitance, current, and temperature limits must be taken from the manufacturer datasheet before release to production.
What is the best NXP equivalent for PCA9513D?
PCA9513AD is the leading NXP-family equivalent candidate because it preserves the hot-pluggable I2C/SMBus buffer function and 8-pin SO format of the PCA9513D. Its suitability depends on matching the PCA9513D revision, pin functions, timing characteristics, and electrical limits rather than package appearance alone. The manufacturer datasheet comparison should be completed for the exact production configuration before the part is approved as a drop-in replacement.

Dados de referência de engenharia para PCA9513D — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the PCA9513D when maintaining a legacy 8-pin I2C or SMBus design that requires one-channel hot-pluggable isolation and operation up to 400 kHz. Its discontinuation status makes it a repair and historical-reference choice rather than a preferred choice for new production. PCA9513AD is the closest identified same-family candidate, but approval still requires matching the exact pin functions, timing characteristics, supply limits, and ordering suffix. PCA9513A is another possible family candidate for evaluation. Do not substitute multi-channel devices such as the PCA9517 solely by function name: different channel counts can change the pin assignments and bus topology. For a new platform, select a currently supported buffer that explicitly covers the required hot-plug behavior, bus rate, capacitance, and power-sequencing conditions, and then validate it against the complete system rather than only the nominal clock frequency.

Comparação com alternativas

Parâmetro Este produto PCA9513AD PCA9513A
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 8-pin SO 8-pin SO 8-pin SO
Device Function Hot-pluggable I2C-bus and SMBus buffer Hot-pluggable I2C-bus and SMBus buffer Hot-pluggable I2C-bus and SMBus buffer
Number of Channels 1 channel 1 channel 1 channel
Maximum Bus Frequency 400 kHz 400 kHz 400 kHz

Principais diferenciais

  • Direct one-channel hot-pluggable bus-buffer function (vs PCA9513AD)
  • Compact isolated-bus implementation (vs PCA9513A)
  • Established fit for legacy live-backplane repair (vs PCA9513AD)

Notas de projeto

Do not treat hot-pluggable operation as permission to violate the PCA9513D input limits. Connector insertion can introduce powered-versus-unpowered pin mismatches, ground offsets, and ESD transients. Use the manufacturer absolute-maximum-rating and input-threshold tables, control power sequencing where the system permits it, and place suitable protection close to the connector. A functional bus buffer does not by itself guarantee safe insertion into every backplane architecture.

Validate rise time and propagation delay for the complete bus rather than only checking the 400 kHz frequency label. Account for connector and trace capacitance, pull-up resistance, clock stretching, and the delay introduced by the buffered path. Keep upstream and downstream routing compact, place pull-ups on the correct bus segment, and measure the clock waveform at the far end of the longest attached module to confirm that the data setup and hold margins remain acceptable.

For a repair or drop-in substitution, verify the exact SOIC-8 footprint dimensions and lead pitch rather than relying only on the generic 8-pin SO label. Confirm pin-one orientation, keep the footprint free of solder bridges on the fine-pitch leads, and inspect whether the historical board includes an exposed-pad or other thermal feature. The PCA9513AD candidate should be compared pin by pin against the manufacturer datasheet before its package is treated as electrically identical.

The buffered upstream and downstream sides should remain within their specified supply conditions during normal operation and connector transitions. Check whether the downstream module can be inserted before its local supply is valid, and determine whether additional isolation, sequencing, or pull-down components are needed to prevent an intermediate logic state from being interpreted as a bus command. Verify the final design against the manufacturer operating information rather than estimating acceptable logic thresholds.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer identifies the PCA9513D as a discontinued industrial-grade interface IC, but the accessible product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status.

Dados verificados em: 2026-11-19 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

PCA9513D datasheet PCA9513D datasheet pdf PCA9513D pinout PCA9513D equivalent PCA9513D replacement PCA9513D cross reference PCA9513D vs PCA9513AD PCA9513D application circuit PCA9513D 400kHz SMBus buffer NXP PCA9513D PCA9513D price PCA9513D stock

Componentes & termos relacionados

NXP Semiconductors PCA9513D PCA9513AD PCA9513A PCA9517 I2C bus SMBus hot-pluggable bus buffer bus buffer interface IC semiconductor 400 kHz one-channel buffer SOIC-8 8-pin SO package surface mount live backplane industrial temperature grade I2C clock and data bus isolation bus capacitance propagation delay RoHS REACH
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ